Discover Creators' Clubs
Bearded Printer
@BeardedPrinter
19 members
I enjoy designing and printing designs that serve many functions. From solvin...
Rob Beast (All Things STL)
@Allthingstl
63 members
The best Storage Wall available in the world! Screw Wall. WIth over 200 models
Plastic 3D
@Plastic3D
15 members
This page creates Plastic 3D Printable models. Articulated Toys & Home Decor
Bugman_140
@Bugman140
19 members
Just a Guy who enjoys making models, specially for Holidays
I hope you enjoy...
Featured Store Models
Design Contests
Balancing Games
339 entries | January 9 – January 25, 2026
Hercules: Custom DJ Knobs
253 entries | November 28 – December 14, 2025
Community Articles
Greetings my friends.
So, I wanted to try this new Article feature and show you the progress on my DHD.
So, I wanted to try this new Article feature and show you the progress on my DHD.
August 21, 2025
Greetings everyone. So, after more then 4 months of work, the DHD is finally finished. Or rather my part is done. It is printed and assembled and painted. Now it will go to the customer for the electronic fitting, lights and sounds so that it could b
October 4, 2025
How did we get here?
So, for anyone following along the Prusawire project, you may know this already, but let's start from the beginning.
I came up with the idea of Prusawire just before Core ONE kits were about to begin shipping. I had just recently
So, for anyone following along the Prusawire project, you may know this already, but let's start from the beginning.
I came up with the idea of Prusawire just before Core ONE kits were about to begin shipping. I had just recently
January 5, 2026
It's a little meta, we know, but what better way to announce our new Articles feature than by writing an article about it? We hate cooking recipes where you first have to hear about the author's grandma's life story and only get to the ingredients an
August 10, 2025
Some folks have already seen some of my announcements, updates and discussions about a Prusa CORE One Mini on various platforms like Reddit. After a few setbacks up until November 2025, the project was put back to the drawing board for the third time
January 14, 2026
3D printing provides the opportunity to make things that are not easily produced by other technologies, and literally change our possibilities. Thanks to the ingenuity and creativity of the community surrounding 3D printing, there are many interestin
November 4, 2025
I’ve never been much of a “car guy,” but now that I drive my Mazda 3 (red, obviously) I have to admit - I love this car! It doesn't have any ultra fancy features, but the original owner did select the wireless key fob option. And it is great. Well, m
August 8, 2025
This past weekend was 3DPrintopia 2025! It's one of the world's largest annual gatherings of 3D printing hobbyists, creators, and companies - and it happens to be a short drive from Lucky 13 home base.
After attending last year's event, I decided thi
After attending last year's event, I decided thi
September 29, 2025
When we introduced official Brand profiles on Printables, the goal was to change how big companies think about 3D printing. Why not give fans the real files? Replacement parts, accessories, cosplay props — made available directly, instead of forcing
September 22, 2025
With Bondtech's INDX coming to the Prusa CORE One, multi-nozzle printing is becoming the new standard. But more colours mean more spools... and more chaos on your desk.
Introducing INBXX: The ultimate, fully configurable filament management system de
Introducing INBXX: The ultimate, fully configurable filament management system de
November 21, 2025
Black Friday deals are live on Printables! For the entire month, enjoy 30% off a wide selection of paid models from our talented designers.
📅 October 30th – November 30th, 2025🌐 Exclusively on the Printables Store
Time to fire up your 3D printer! 🔥
D
📅 October 30th – November 30th, 2025🌐 Exclusively on the Printables Store
Time to fire up your 3D printer! 🔥
D
November 4, 2025
I’m incredibly honored to be nominated for the Printables Designer of the Year Award!
If you’ve enjoyed using my models, printed something that helped you, or simply liked my approach to design, I’d truly appreciate your support.
Your vote would mean
If you’ve enjoyed using my models, printed something that helped you, or simply liked my approach to design, I’d truly appreciate your support.
Your vote would mean
December 18, 2025
3D FDM/SLA Printing, Post Processing and Spray Paint Booth Environment - Air Quality Issues/Solution
Air Quality can be a significant issue (toxicity, odour and heat) when 3D printing, cleanup and post processing take place indoors.
Background Initially when I had just 1 small 3D FDM printer (Prusa MK2.5s) air quality was not as big an issue as dra
Background Initially when I had just 1 small 3D FDM printer (Prusa MK2.5s) air quality was not as big an issue as dra
January 12, 2026
Thank you so much EVERYONE for the huge amount of support! I never imagined that I would be in the running for an award this big, ITS AMAZING! Vote for finalists now: https://www.printables.com/awards/2025
January 8, 2026
Could AI be integrated responsibly in the 3D model-creating process? Can a model bear the “AI” tag without being immediately dismissed as slop? AI generated 3D models have flooded every repository web platform. You probably have encountered them here
September 11, 2025
Hey everyone!
One day as a kid I went to the newspaper stand to check do they have any new comics for me. At that time we didn't had Marvel or DC stuff, we mostly had Italian published stuff like Dylan Dog, Zagor, Martin Mysteree etc... I know, you n
One day as a kid I went to the newspaper stand to check do they have any new comics for me. At that time we didn't had Marvel or DC stuff, we mostly had Italian published stuff like Dylan Dog, Zagor, Martin Mysteree etc... I know, you n
August 25, 2025
Lets talk about prototyping with (FDM) 3D printers, the inevitable failed prints, taking wrong measurements and all the tight tolerances.
Working on a recent project, a RC Willis Jeep, i had to do a lot of test prints. While the pile of plastic grew
Working on a recent project, a RC Willis Jeep, i had to do a lot of test prints. While the pile of plastic grew
January 16, 2026
Greetings everyone. So, I have started to work on this extremely nice Shuttle from the Avatar movies. The Valkyrie Shuttle. After some work, the Base Model is finaly done. The model will be some 60cm long.
September 16, 2025
I really love using PrusaSlicer creatively to customize objects or even make new ones. Obviously, the primary purpose of the program is to slice existing models to be printed as accurately as possible to the original 3D file. But, with just a little
August 11, 2025
🎉 Thank You for 10,000 Downloads! 🎉
I just want to say a huge thank you to all of you!Reaching 10,000 downloads and receiving so many positive reviews means a lot to me.
I’m really happy that you enjoy my models and find them useful.Thanks for every
I just want to say a huge thank you to all of you!Reaching 10,000 downloads and receiving so many positive reviews means a lot to me.
I’m really happy that you enjoy my models and find them useful.Thanks for every
January 17, 2026
You can easily create your own custom 3D jigsaw puzzle within PrusaSlicer! This guide includes the whole workflow.
I was inspired to create 3D jigsaw puzzles by this article on Prusa Blog. However, it was originally written in 2019, and I found some
I was inspired to create 3D jigsaw puzzles by this article on Prusa Blog. However, it was originally written in 2019, and I found some
September 4, 2025
Short story: I went to the store, there were some MOTU toys and I went down memory lane and started remembering all the cool stuff from my childhood so I made Orko :) then I re-made Mini He-Man... :D
August 18, 2025
Hello Everyone 🚀 Big News! CN3D x BigTreeTech Collaboration 🛠️
After seeing our custom approach to upgrading the Nebula Extruder, the team at BigTreeTech reached out to us directly! 🤝
We’re excited to announce that we’re working together to turn our
After seeing our custom approach to upgrading the Nebula Extruder, the team at BigTreeTech reached out to us directly! 🤝
We’re excited to announce that we’re working together to turn our
August 5, 2025
I’ve released a new modular scraper designed for 3D printer bed cleaning.It works with standard Stanley blades as well as several 3D‑printed blade options included in the model.You can also design your own blade shapes or even make blades from other
January 17, 2026
Organic supports in PrusaSlicer are called tree supports in other slicers - and they really do look like a tree trunk and branches. This inspired me to model a Benchy tree, entirely within PrusaSlicer. The trick is to adjust the supports so that they
August 18, 2025
Safety Warning: You’re responsible for your own safety. You’ll be working with hot parts and tools that can seriously burn you or others, or set fire to things around you.
November 23, 2025
As someone always eager to learn and experiment with new aspects of 3D printing and modelling, I recently became intrigued by the surge of AI-labelled, visually stunning models shared by other creators. The blend of artificial intelligence with 3D mo
January 6, 2026
Color variations of Prusament PLA Noctua Brown and Beige
I met the Noctua brand when I was making ventilation for my Chameleon's terrarium.
I used a very quiet Noctua NF-A4x10 5V fan.
Even then, I really liked the combination of colors - soft ligh
I met the Noctua brand when I was making ventilation for my Chameleon's terrarium.
I used a very quiet Noctua NF-A4x10 5V fan.
Even then, I really liked the combination of colors - soft ligh
January 5, 2026
As a massive THANK YOU for your support this year, I’m giving away a Bambu Lab A1 Mini 3D printer!
This giveaway is exclusive to our members.
✅ How to Enter: The only requirement to participate is to have an active membership of Flowalistik on Thangs
This giveaway is exclusive to our members.
✅ How to Enter: The only requirement to participate is to have an active membership of Flowalistik on Thangs
November 19, 2025
September Print of the Month contest on the Prusa3D subreddit was a success, with more participants joining every month. Join in too for the chance to win 1050 Prusameters - enough for three spools of our Prusament! We're now heading into the October
October 1, 2025
It’s a simple question — yet one that’s gone unanswered for over 20 years.Searching online, I found several theories.
For example, in the Pokémon manga, Pokéballs are transparent, so we can see what’s inside. But honestly, it’s kind of sad to see th
For example, in the Pokémon manga, Pokéballs are transparent, so we can see what’s inside. But honestly, it’s kind of sad to see th
November 7, 2025
I love sending physical post to my friends - postcards from my travels, little greetings to those I don't get to see often - it always cheers people up when they get mail! And because I have a 3D printer, I thought, “could postcards be 3D-printed and
September 8, 2025
The idea behind my GEN2 Decor Series was to bring the modular storage system into the home or office, opening up endless possibilities for customization and style. The Chevron Series has always been special to me because it marked my first step away
October 5, 2025
Head(amame) V2.1 Release
Quality of life updates to the head(amame) V2. Improvements to the file structure, slicing, printing, assembly and reliability. There's lots of small changes here that add up to a much better experience for anyone printing he
Quality of life updates to the head(amame) V2. Improvements to the file structure, slicing, printing, assembly and reliability. There's lots of small changes here that add up to a much better experience for anyone printing he
September 6, 2025
Preacher builders, please see the following message (also in the Preacher post),
Thanks to user MatBoo_3935141 for reporting these
1. Lifter and roller interface screw hole modified to make ID into 2.4mm instead of 2.9mm to prevent the screw from bec
Thanks to user MatBoo_3935141 for reporting these
1. Lifter and roller interface screw hole modified to make ID into 2.4mm instead of 2.9mm to prevent the screw from bec
January 17, 2026
I've been running 3D Printers for the past 5 years or so. Ive had access to many printers. Machines come and go, but yet they all lack one feature. AMS/MMU? meh. Built-in cameras? seen it. CoreXY? old news.
About a year ago, now, I have discovered a
About a year ago, now, I have discovered a
August 22, 2025
TL;DR
I will publish all the print-in-place design principles that I have developed over the last few years under a Creative Commons licence. This will not include the dinosaur models, only the joints as separate files.
Hello Dinophiles!
2026 is righ
I will publish all the print-in-place design principles that I have developed over the last few years under a Creative Commons licence. This will not include the dinosaur models, only the joints as separate files.
Hello Dinophiles!
2026 is righ
December 11, 2025
Soldering is the process of joining metal parts by melting and flowing a filler metal, called solder, into the joint between them.
The solder has a lower melting point than the metals being joined, so it melts and flows into the gap, and then solidi
The solder has a lower melting point than the metals being joined, so it melts and flows into the gap, and then solidi
November 6, 2025
Classis Chess
This project is a compact, travel-friendly chess and checkers set designed with a focus on utility and classical aesthetics. The visual style of the pieces mimics the iconic 2D diagrams found in chess textbooks and educational literatur
This project is a compact, travel-friendly chess and checkers set designed with a focus on utility and classical aesthetics. The visual style of the pieces mimics the iconic 2D diagrams found in chess textbooks and educational literatur
December 27, 2025
This is about geting an used Prusa XL and taking it only for satisfying personal needs. Clearly this is just a maintenance guide! No, you are the weirdo!
January 4, 2026
The Official Prusa MMU3 is proven to be the most reliable multi-material solution on the current market. However, it comes with 1 big flaw for user experience; the complex buffer solution requires almost a full desk to function, clutters the workspac
August 11, 2025
When passion beats fearEvery month, Printables launches amazing design challenges — and I’ve always admired the participants, but never felt “good enough” to join. I used to think my projects, even with all the care and creativity behind them, didn’t
November 7, 2025
While finalizing the XY motion system for the CORE One Mini, an issue came up with linear rail availability.
The distance between the linear rail holders is fixed at exactly 245 mm. The originally intended rail, a THK SRS12GN, is available in 220 mm
The distance between the linear rail holders is fixed at exactly 245 mm. The originally intended rail, a THK SRS12GN, is available in 220 mm
January 18, 2026
let me know what you think of this chucky stylized rate it 1 to 10 in the comments, I might put it up for sale as well depends on how many people heart it.
January 11, 2026
I’m starting a new long-term project called the Stained Glass Lightbox Series.
This series is focused on turning existing and future designs into illuminated stained-glass style front plates, meant to be displayed inside a modular circular lightbox,
This series is focused on turning existing and future designs into illuminated stained-glass style front plates, meant to be displayed inside a modular circular lightbox,
December 29, 2025
While finishing and writing up some seat adjustment handles for a Mercedes Benz, we once again realised that our ABS acetone vapour smoothing technique had gradually evolved over the years, into something which subtly differs in a few key details fro
December 22, 2025
Hello everyone! 👋
I simply cannot believe what is happening! I wanted to thank you all from the bottom of my heart for the incredible support. We have just reached the magical milestone of 3000 downloads of my projects! 🤯 It is thanks to you that my
I simply cannot believe what is happening! I wanted to thank you all from the bottom of my heart for the incredible support. We have just reached the magical milestone of 3000 downloads of my projects! 🤯 It is thanks to you that my
October 22, 2025
News from the Blog
Exploring CORE One+: New Features, Upgrades, INDX
We’ve got one more product released in the past few months that still deserves a proper introduction: let’s talk CORE One+! It’s the next stage in the CORE One’s evolution that features a handful of tweaks for even smoother workflow. We’ll... The post Exploring CORE One+: New Features, Upgrades, INDX appeared first on Original Prusa 3D Printers.
Winter Holidays Decorations 2025 Contest Winners
The 2025 holiday contest brought in over 2,600 entries, so we had a lot to look through while judging. With the Original Prusa CORE One+ as the main prize for the first time, it clearly caught your attention - and you... The post Winter Holidays Decorations 2025 Contest Winners appeared first on Original Prusa 3D Printers.
How 3D printing started: About Rep-rap and open-source with Adrian Bowyer
The Open Community License we just released wasn’t something we came up with overnight. It was years in the making, involving long discussions to ensure it actually serves the community right. One of the people we consulted was Dr. Adrian Bowyer.... The post How 3D printing started: About Rep-rap and open-source with Adrian Bowyer appeared first on Original Prusa 3D Printers.
Open-sourcing CORE One CAD Files Under the New Open Community License (OCL)
Today, we are releasing the full CAD files for the CORE One and CORE One L frames. You can download them right now, load them into your CAD software and use them to create mods and accessories, import them to Fusion... The post Open-sourcing CORE One CAD Files Under the New Open Community License (OCL) appeared first on Original Prusa 3D Printers.