Shop top categories that ship internationally
Currently Unavailable

KINGPRINT DRV8825 Stepper Motor Driver Module with Heat Sink for 3D Printer Rrerap Ramps 1.4 A4988 (Pack of 5pcs)

To see product details, add this item to your cart. You can always remove it later.
  • -The module has a pinout, it can be used as a better performance of the pull-down menu board replacement in many applications
  • -DRV8825 features an adjustable current limit, overcurrent and overtemperature protection, six micro-resolution (down 1/32-step)
  • -It uses 8.2 - 45 V, can provide up to about 1.5 per phase no heat sink or forced air flow (rated up to 2.2 per volume sufficient additional cooling)
  • -Intelligent chopping control automatically selects the correct current decay mode (fast decay or slow decay)
  • -Built-in voltage regulator (the need for any external logic supply voltage)
› See more product details

Product Description

1.A simple steps and direction control interface
2.Six different steps resolutions: full step, half step, 1/4-step1/8-step1/16-step, 1/32-step
3.CAN interface directly with 3.3 V and 5 V systems
4.Over-temperature thermal shutdown, overcurrent shutdown, undervoltage lockout
5.Short to ground short circuit load protection
6.4 Layer 2 oz copper PCB, in order to improve heat dissipation
7.Exposed solder ground below the bottom of the driver IC on the printed circuit board pad
8.Module size, pin and interface matching A4988 stepper motor driver operators in many ways
9.Adjustable current control lets you set a potentiometer, which lets you use the stepper motor's rated voltage or more, in order to achieve a higher rate of maximum output current step
10.Maximum 45 V supply voltage

Package Included:

5* DRV8825 Stepper Motor Driver Module
5*Heat Sink

More Item:
KINGPRINT TMC2130/TMC2208 Stepper Motor Driver

NOTE:
If you find any problem, please contact us at first, and our technical staff will help you to solve the problem at once. Thanks!

Product information

Technical Details

Package Dimensions ‎5.2 x 2.99 x 1.02 inches
Item Weight ‎0.634 ounces
Manufacturer ‎KINGPRINT
ASIN ‎B075XH1TSJ
Item model number ‎KINGPRINT-DIC000035A01
Is Discontinued By Manufacturer ‎No
Date First Available ‎September 26, 2017

Additional Information

Best Sellers Rank

Feedback

KINGPRINT DRV8825 Stepper Motor Driver Module with Heat Sink for 3D Printer Rrerap Ramps 1.4 A4988 (Pack of 5pcs)

Found a lower price? Let us know. Although we can't match every price reported, we'll use your feedback to ensure that our prices remain competitive.

Where did you see a lower price?
/
/
/
/
Please sign in to provide feedback.

Product Summary: KINGPRINT DRV8825 Stepper Motor Driver Module with Heat Sink for 3D Printer Rrerap Ramps 1.4 A4988 (Pack of 5pcs)

From BIGTREETECH

Price

No featured offers available

Other sellers

Other sellers

About this Item

  • -The module has a pinout, it can be used as a better performance of the pull-down menu board replacement in many applications
  • -DRV8825 features an adjustable current limit, overcurrent and overtemperature protection, six micro-resolution (down 1/32-step)
  • -It uses 8.2 - 45 V, can provide up to about 1.5 per phase no heat sink or forced air flow (rated up to 2.2 per volume sufficient additional cooling)
  • -Intelligent chopping control automatically selects the correct current decay mode (fast decay or slow decay)
  • -Built-in voltage regulator (the need for any external logic supply voltage)

Product Description

1.A simple steps and direction control interface 2.Six different steps resolutions: full step, half step, 1/4-step1/8-step1/16-step, 1/32-step 3.CAN interface directly with 3.3 V and 5 V systems 4.Over-temperature thermal shutdown, overcurrent shutdown, undervoltage lockout 5.Short to ground short circuit load protection 6.4 Layer 2 oz copper PCB, in order to improve heat dissipation 7.Exposed solder ground below the bottom of the driver IC on the printed circuit board pad 8.Module size, pin and interface matching A4988 stepper motor driver operators in many ways 9.Adjustable current control lets you set a potentiometer, which lets you use the stepper motor's rated voltage or more, in order to achieve a higher rate of maximum output current step 10.Maximum 45 V supply voltage Package Included: 5* DRV8825 Stepper Motor Driver Module 5*Heat Sink More Item: KINGPRINT TMC2130/TMC2208 Stepper Motor Driver

NOTE: If you find any problem, please contact us at first, and our technical staff will help you to solve the problem at once. Thanks!

Report an issue with this product or seller

Feedback

Did you find this product summary feature useful?

Thank you for your feedback
Thank you for your feedback. You selected "Yes, it is useful"
Thank you for your feedback. You selected "No, it is not useful"
Product summary presents key information. Close to see all product details.