[feature] Support for GD32F130 #724
Description
- Programmer/board type: Stlink v2
- Programmer firmware version: Last one
- Operating system: Linux
- Stlink tools version and/or git commit hash: st-flash 1.4.0-41-ge147a8e
- Stlink commandline tool name:
st-flash - Target chip (and optional board): GD32F130C8 (clone of STM32F103C8)
Output:
> st-flash --reset write build/hover.bin 0x8000000
st-flash 1.4.0-41-ge147a8e
2018-07-15T12:27:50 INFO common.c: Loading device parameters....
2018-07-15T12:27:50 INFO common.c: Device connected is: F1 Medium-density device, id 0x13030410
2018-07-15T12:27:50 INFO common.c: SRAM size: 0x5000 bytes (20 KiB), Flash: 0x10000 bytes (64 KiB) in pages of 1024 bytes
2018-07-15T12:27:50 INFO common.c: Attempting to write 15404 (0x3c2c) bytes to stm32 address: 134217728 (0x8000000)
Flash page at addr: 0x08003c00 erased
2018-07-15T12:27:50 INFO common.c: Finished erasing 16 pages of 1024 (0x400) bytes
2018-07-15T12:27:50 INFO common.c: Starting Flash write for VL/F0/F3/F1_XL core id
2018-07-15T12:27:50 INFO flash_loader.c: Successfully loaded flash loader in sram
2/16 pages written2018-07-15T12:27:50 ERROR flash_loader.c: write error, count == 512
2018-07-15T12:27:50 ERROR common.c: stlink_flash_loader_run(0x8000800) failed! == -1
stlink_fwrite_flash() == -1
Sometimes the count is a random number instead of 512
Expected/description:
I can't manage to flash a GD32F130C8 with st-flash with this StLink:
- I've connected 3v3, Gnd, SWDIO and SWCLK to the board...
- I tried to connect also RST but it's complicated because there's no pin to solder
- I tried to flash it on Windows with STM32 ST-LINK Utility, same problem: only a few bytes are written then it's only FFFFF...
- I tried multiples bin files (hello world, already made firmwares...)
Have you got any idea of what's wrong?