cu-crsf

Serial bridge for TBS Crossfire / ExpressLRS receivers. It parses CRSF packets coming from a UART into Copper messages and can optionally forward RC or link statistics back out over the same link.

Channels

• rc_rx (RcChannelsPayload): latest RC channel values from the receiver.
• lq_rx (LinkStatisticsPayload): downlink link-quality metrics.
• rc_tx / lq_tx: optional uplink of RC or link statistics toward the transmitter.

Resources and configuration

The bridge expects a serial resource (anything implementing embedded_io Read/Write + Send + Sync). Point the bridge's resources map at a bundle entry.

std builds

Use the built-in StdSerialBundle, which opens a serial port and stores it as Mutex<StdSerial> under <bundle>.serial.

resources: [
  (
    id: "radio",
    provider: "cu_crsf::StdSerialBundle",
    config: { "serial_path": "/dev/ttyUSB0", "baudrate": 420000 },
  ),
],
bridges: [
  (
    id: "crsf",
    type: "cu_crsf::CrsfBridgeStd",
    resources: { serial: "radio.serial" },
    channels: [ Rx (id: "rc_rx"), Rx (id: "lq_rx") ],
  ),
],

no-std builds

Provide your own bundle that moves a UART into the ResourceManager (typically a spin::Mutex<SerialPort>). The resources module in examples/cu_elrs_bdshot_demo shows a complete pattern:

resources: [
  ( id: "fc", provider: "my_app::resources::RadioBundle" ),
],
bridges: [
  (
    id: "crsf",
    type: "cu_crsf::CrsfBridge<SerialResource, SerialPortError>",
    resources: { serial: "fc.serial" },
    channels: [ Rx (id: "rc_rx"), Tx (id: "lq_tx") ],
  ),
],

See examples/cu_elrs_bdshot_demo for a full wiring that feeds CRSF RC channels into a BDShot bridge on the RP2350 reference board.