From 53dfc6ee78dbbf59bacb539431fdc9f6927fcb96 Mon Sep 17 00:00:00 2001
From: Alec Delaney <tekktik@gmail.com>
Date: Mon, 22 Aug 2022 21:36:32 -0400
Subject: [PATCH 01/19] Keep copyright up to date in documentation

---
 docs/conf.py | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/docs/conf.py b/docs/conf.py
index bba6b10..589161a 100644
--- a/docs/conf.py
+++ b/docs/conf.py
@@ -6,6 +6,7 @@
 
 import os
 import sys
+import datetime
 
 sys.path.insert(0, os.path.abspath(".."))
 
@@ -43,7 +44,8 @@
 
 # General information about the project.
 project = "Adafruit BLE_BroadcastNet Library"
-copyright = "2020 Scott Shawcroft"
+current_year = str(datetime.datetime.now().year)
+copyright = current_year + " Scott Shawcroft"
 author = "Scott Shawcroft"
 
 # The version info for the project you're documenting, acts as replacement for

From 2848b942550ed62e6d67d9f6ec6e9fe75da90859 Mon Sep 17 00:00:00 2001
From: Alec Delaney <tekktik@gmail.com>
Date: Tue, 23 Aug 2022 17:26:22 -0400
Subject: [PATCH 02/19] Use year duration range for copyright attribution

---
 docs/conf.py | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/docs/conf.py b/docs/conf.py
index 589161a..97e790c 100644
--- a/docs/conf.py
+++ b/docs/conf.py
@@ -44,8 +44,14 @@
 
 # General information about the project.
 project = "Adafruit BLE_BroadcastNet Library"
+creation_year = "2020"
 current_year = str(datetime.datetime.now().year)
-copyright = current_year + " Scott Shawcroft"
+year_duration = (
+    current_year
+    if current_year == creation_year
+    else creation_year + " - " + current_year
+)
+copyright = year_duration + " Scott Shawcroft"
 author = "Scott Shawcroft"
 
 # The version info for the project you're documenting, acts as replacement for

From 66865080586f27f600ec00efee8710e624a61b13 Mon Sep 17 00:00:00 2001
From: Alec Delaney <89490472+tekktrik@users.noreply.github.com>
Date: Fri, 4 Nov 2022 00:02:50 -0400
Subject: [PATCH 03/19] Switching to composite actions

---
 .github/workflows/build.yml        | 67 +----------------------
 .github/workflows/release.yml      | 88 ------------------------------
 .github/workflows/release_gh.yml   | 14 +++++
 .github/workflows/release_pypi.yml | 14 +++++
 4 files changed, 30 insertions(+), 153 deletions(-)
 delete mode 100644 .github/workflows/release.yml
 create mode 100644 .github/workflows/release_gh.yml
 create mode 100644 .github/workflows/release_pypi.yml

diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml
index cb2f60e..041a337 100644
--- a/.github/workflows/build.yml
+++ b/.github/workflows/build.yml
@@ -10,68 +10,5 @@ jobs:
   test:
     runs-on: ubuntu-latest
     steps:
-    - name: Dump GitHub context
-      env:
-        GITHUB_CONTEXT: ${{ toJson(github) }}
-      run: echo "$GITHUB_CONTEXT"
-    - name: Translate Repo Name For Build Tools filename_prefix
-      id: repo-name
-      run: |
-        echo ::set-output name=repo-name::$(
-        echo ${{ github.repository }} |
-        awk -F '\/' '{ print tolower($2) }' |
-        tr '_' '-'
-        )
-    - name: Set up Python 3.x
-      uses: actions/setup-python@v2
-      with:
-        python-version: "3.x"
-    - name: Versions
-      run: |
-        python3 --version
-    - name: Checkout Current Repo
-      uses: actions/checkout@v1
-      with:
-        submodules: true
-    - name: Checkout tools repo
-      uses: actions/checkout@v2
-      with:
-        repository: adafruit/actions-ci-circuitpython-libs
-        path: actions-ci
-    - name: Install dependencies
-      # (e.g. - apt-get: gettext, etc; pip: circuitpython-build-tools, requirements.txt; etc.)
-      run: |
-        source actions-ci/install.sh
-    - name: Pip install Sphinx, pre-commit
-      run: |
-        pip install --force-reinstall Sphinx sphinx-rtd-theme pre-commit
-    - name: Library version
-      run: git describe --dirty --always --tags
-    - name: Setup problem matchers
-      uses: adafruit/circuitpython-action-library-ci-problem-matchers@v1
-    - name: Pre-commit hooks
-      run: |
-        pre-commit run --all-files
-    - name: Build assets
-      run: circuitpython-build-bundles --filename_prefix ${{ steps.repo-name.outputs.repo-name }} --library_location .
-    - name: Archive bundles
-      uses: actions/upload-artifact@v2
-      with:
-        name: bundles
-        path: ${{ github.workspace }}/bundles/
-    - name: Build docs
-      working-directory: docs
-      run: sphinx-build -E -W -b html . _build/html
-    - name: Check For pyproject.toml
-      id: need-pypi
-      run: |
-        echo ::set-output name=pyproject-toml::$( find . -wholename './pyproject.toml' )
-    - name: Build Python package
-      if: contains(steps.need-pypi.outputs.pyproject-toml, 'pyproject.toml')
-      run: |
-        pip install --upgrade build twine
-        for file in $(find -not -path "./.*" -not -path "./docs*" \( -name "*.py" -o -name "*.toml" \) ); do
-            sed -i -e "s/0.0.0+auto.0/1.2.3/" $file;
-        done;
-        python -m build
-        twine check dist/*
+    - name: Run Build CI workflow
+      uses: adafruit/workflows-circuitpython-libs/build@main
diff --git a/.github/workflows/release.yml b/.github/workflows/release.yml
deleted file mode 100644
index f3a0325..0000000
--- a/.github/workflows/release.yml
+++ /dev/null
@@ -1,88 +0,0 @@
-# SPDX-FileCopyrightText: 2017 Scott Shawcroft, written for Adafruit Industries
-#
-# SPDX-License-Identifier: MIT
-
-name: Release Actions
-
-on:
-  release:
-    types: [published]
-
-jobs:
-  upload-release-assets:
-    runs-on: ubuntu-latest
-    steps:
-    - name: Dump GitHub context
-      env:
-        GITHUB_CONTEXT: ${{ toJson(github) }}
-      run: echo "$GITHUB_CONTEXT"
-    - name: Translate Repo Name For Build Tools filename_prefix
-      id: repo-name
-      run: |
-        echo ::set-output name=repo-name::$(
-        echo ${{ github.repository }} |
-        awk -F '\/' '{ print tolower($2) }' |
-        tr '_' '-'
-        )
-    - name: Set up Python 3.x
-      uses: actions/setup-python@v2
-      with:
-        python-version: "3.x"
-    - name: Versions
-      run: |
-        python3 --version
-    - name: Checkout Current Repo
-      uses: actions/checkout@v1
-      with:
-        submodules: true
-    - name: Checkout tools repo
-      uses: actions/checkout@v2
-      with:
-        repository: adafruit/actions-ci-circuitpython-libs
-        path: actions-ci
-    - name: Install deps
-      run: |
-        source actions-ci/install.sh
-    - name: Build assets
-      run: circuitpython-build-bundles --filename_prefix ${{ steps.repo-name.outputs.repo-name }} --library_location .
-    - name: Upload Release Assets
-      # the 'official' actions version does not yet support dynamically
-      # supplying asset names to upload. @csexton's version chosen based on
-      # discussion in the issue below, as its the simplest to implement and
-      # allows for selecting files with a pattern.
-      # https://github.com/actions/upload-release-asset/issues/4
-      #uses: actions/upload-release-asset@v1.0.1
-      uses: csexton/release-asset-action@master
-      with:
-        pattern: "bundles/*"
-        github-token: ${{ secrets.GITHUB_TOKEN }}
-
-  upload-pypi:
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v1
-    - name: Check For pyproject.toml
-      id: need-pypi
-      run: |
-        echo ::set-output name=pyproject-toml::$( find . -wholename './pyproject.toml' )
-    - name: Set up Python
-      if: contains(steps.need-pypi.outputs.pyproject-toml, 'pyproject.toml')
-      uses: actions/setup-python@v2
-      with:
-        python-version: '3.x'
-    - name: Install dependencies
-      if: contains(steps.need-pypi.outputs.pyproject-toml, 'pyproject.toml')
-      run: |
-        python -m pip install --upgrade pip
-        pip install --upgrade build twine
-    - name: Build and publish
-      if: contains(steps.need-pypi.outputs.pyproject-toml, 'pyproject.toml')
-      env:
-        TWINE_USERNAME: ${{ secrets.pypi_username }}
-        TWINE_PASSWORD: ${{ secrets.pypi_password }}
-      run: |
-        for file in $(find -not -path "./.*" -not -path "./docs*" \( -name "*.py" -o -name "*.toml" \) ); do
-            sed -i -e "s/0.0.0+auto.0/${{github.event.release.tag_name}}/" $file;
-        done;
-        python -m build
-        twine upload dist/*
diff --git a/.github/workflows/release_gh.yml b/.github/workflows/release_gh.yml
new file mode 100644
index 0000000..041a337
--- /dev/null
+++ b/.github/workflows/release_gh.yml
@@ -0,0 +1,14 @@
+# SPDX-FileCopyrightText: 2017 Scott Shawcroft, written for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
+name: Build CI
+
+on: [pull_request, push]
+
+jobs:
+  test:
+    runs-on: ubuntu-latest
+    steps:
+    - name: Run Build CI workflow
+      uses: adafruit/workflows-circuitpython-libs/build@main
diff --git a/.github/workflows/release_pypi.yml b/.github/workflows/release_pypi.yml
new file mode 100644
index 0000000..041a337
--- /dev/null
+++ b/.github/workflows/release_pypi.yml
@@ -0,0 +1,14 @@
+# SPDX-FileCopyrightText: 2017 Scott Shawcroft, written for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
+name: Build CI
+
+on: [pull_request, push]
+
+jobs:
+  test:
+    runs-on: ubuntu-latest
+    steps:
+    - name: Run Build CI workflow
+      uses: adafruit/workflows-circuitpython-libs/build@main

From b054dda9854784f9b25ac12a032c3149cf8b2bac Mon Sep 17 00:00:00 2001
From: Alec Delaney <89490472+tekktrik@users.noreply.github.com>
Date: Fri, 4 Nov 2022 00:47:00 -0400
Subject: [PATCH 04/19] Updated pylint version to 2.13.0

---
 .pre-commit-config.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/.pre-commit-config.yaml b/.pre-commit-config.yaml
index 3343606..4c43710 100644
--- a/.pre-commit-config.yaml
+++ b/.pre-commit-config.yaml
@@ -18,7 +18,7 @@ repos:
       - id: end-of-file-fixer
       - id: trailing-whitespace
   - repo: https://github.com/pycqa/pylint
-    rev: v2.11.1
+    rev: v2.13.0
     hooks:
       - id: pylint
         name: pylint (library code)

From 2103706dd27fdc6494c03be2fc24f2bb6839fe50 Mon Sep 17 00:00:00 2001
From: Alec Delaney <89490472+tekktrik@users.noreply.github.com>
Date: Fri, 4 Nov 2022 08:15:20 -0400
Subject: [PATCH 05/19] Update pylint to 2.15.5

---
 .pre-commit-config.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/.pre-commit-config.yaml b/.pre-commit-config.yaml
index 4c43710..0e5fccc 100644
--- a/.pre-commit-config.yaml
+++ b/.pre-commit-config.yaml
@@ -18,7 +18,7 @@ repos:
       - id: end-of-file-fixer
       - id: trailing-whitespace
   - repo: https://github.com/pycqa/pylint
-    rev: v2.13.0
+    rev: v2.15.5
     hooks:
       - id: pylint
         name: pylint (library code)

From 4cf7dfff289414f9af30ef48ec61b241a67ec930 Mon Sep 17 00:00:00 2001
From: Alec Delaney <89490472+tekktrik@users.noreply.github.com>
Date: Fri, 4 Nov 2022 09:12:45 -0400
Subject: [PATCH 06/19] Fix release CI files

---
 .github/workflows/release_gh.yml   | 14 +++++++++-----
 .github/workflows/release_pypi.yml | 15 ++++++++++-----
 2 files changed, 19 insertions(+), 10 deletions(-)

diff --git a/.github/workflows/release_gh.yml b/.github/workflows/release_gh.yml
index 041a337..b8aa8d6 100644
--- a/.github/workflows/release_gh.yml
+++ b/.github/workflows/release_gh.yml
@@ -2,13 +2,17 @@
 #
 # SPDX-License-Identifier: MIT
 
-name: Build CI
+name: GitHub Release Actions
 
-on: [pull_request, push]
+on:
+  release:
+    types: [published]
 
 jobs:
-  test:
+  upload-release-assets:
     runs-on: ubuntu-latest
     steps:
-    - name: Run Build CI workflow
-      uses: adafruit/workflows-circuitpython-libs/build@main
+    - name: Run GitHub Release CI workflow
+      uses: adafruit/workflows-circuitpython-libs/release-gh@main
+      with:
+        github-token: ${{ secrets.GITHUB_TOKEN }}
diff --git a/.github/workflows/release_pypi.yml b/.github/workflows/release_pypi.yml
index 041a337..65775b7 100644
--- a/.github/workflows/release_pypi.yml
+++ b/.github/workflows/release_pypi.yml
@@ -2,13 +2,18 @@
 #
 # SPDX-License-Identifier: MIT
 
-name: Build CI
+name: PyPI Release Actions
 
-on: [pull_request, push]
+on:
+  release:
+    types: [published]
 
 jobs:
-  test:
+  upload-release-assets:
     runs-on: ubuntu-latest
     steps:
-    - name: Run Build CI workflow
-      uses: adafruit/workflows-circuitpython-libs/build@main
+    - name: Run PyPI Release CI workflow
+      uses: adafruit/workflows-circuitpython-libs/release-pypi@main
+      with:
+        pypi-username: ${{ secrets.pypi_username }}
+        pypi-password: ${{ secrets.pypi_password }}

From da9948cefeeb0eed8081b8a24cc36e0904434ed3 Mon Sep 17 00:00:00 2001
From: Alec Delaney <89490472+tekktrik@users.noreply.github.com>
Date: Fri, 4 Nov 2022 18:34:33 -0400
Subject: [PATCH 07/19] Update .pylintrc for v2.15.5

---
 .pylintrc | 45 ++++-----------------------------------------
 1 file changed, 4 insertions(+), 41 deletions(-)

diff --git a/.pylintrc b/.pylintrc
index f772971..40208c3 100644
--- a/.pylintrc
+++ b/.pylintrc
@@ -1,4 +1,4 @@
-# SPDX-FileCopyrightText: 2021 ladyada for Adafruit Industries
+# SPDX-FileCopyrightText: 2017 Scott Shawcroft, written for Adafruit Industries
 #
 # SPDX-License-Identifier: Unlicense
 
@@ -26,7 +26,7 @@ jobs=1
 
 # List of plugins (as comma separated values of python modules names) to load,
 # usually to register additional checkers.
-load-plugins=
+load-plugins=pylint.extensions.no_self_use
 
 # Pickle collected data for later comparisons.
 persistent=yes
@@ -54,8 +54,8 @@ confidence=
 # --enable=similarities". If you want to run only the classes checker, but have
 # no Warning level messages displayed, use"--disable=all --enable=classes
 # --disable=W"
-# disable=import-error,print-statement,parameter-unpacking,unpacking-in-except,old-raise-syntax,backtick,long-suffix,old-ne-operator,old-octal-literal,import-star-module-level,raw-checker-failed,bad-inline-option,locally-disabled,locally-enabled,file-ignored,suppressed-message,useless-suppression,deprecated-pragma,apply-builtin,basestring-builtin,buffer-builtin,cmp-builtin,coerce-builtin,execfile-builtin,file-builtin,long-builtin,raw_input-builtin,reduce-builtin,standarderror-builtin,unicode-builtin,xrange-builtin,coerce-method,delslice-method,getslice-method,setslice-method,no-absolute-import,old-division,dict-iter-method,dict-view-method,next-method-called,metaclass-assignment,indexing-exception,raising-string,reload-builtin,oct-method,hex-method,nonzero-method,cmp-method,input-builtin,round-builtin,intern-builtin,unichr-builtin,map-builtin-not-iterating,zip-builtin-not-iterating,range-builtin-not-iterating,filter-builtin-not-iterating,using-cmp-argument,eq-without-hash,div-method,idiv-method,rdiv-method,exception-message-attribute,invalid-str-codec,sys-max-int,bad-python3-import,deprecated-string-function,deprecated-str-translate-call
-disable=print-statement,parameter-unpacking,unpacking-in-except,old-raise-syntax,backtick,long-suffix,old-ne-operator,old-octal-literal,import-star-module-level,raw-checker-failed,bad-inline-option,locally-disabled,locally-enabled,file-ignored,suppressed-message,useless-suppression,deprecated-pragma,apply-builtin,basestring-builtin,buffer-builtin,cmp-builtin,coerce-builtin,execfile-builtin,file-builtin,long-builtin,raw_input-builtin,reduce-builtin,standarderror-builtin,unicode-builtin,xrange-builtin,coerce-method,delslice-method,getslice-method,setslice-method,no-absolute-import,old-division,dict-iter-method,dict-view-method,next-method-called,metaclass-assignment,indexing-exception,raising-string,reload-builtin,oct-method,hex-method,nonzero-method,cmp-method,input-builtin,round-builtin,intern-builtin,unichr-builtin,map-builtin-not-iterating,zip-builtin-not-iterating,range-builtin-not-iterating,filter-builtin-not-iterating,using-cmp-argument,eq-without-hash,div-method,idiv-method,rdiv-method,exception-message-attribute,invalid-str-codec,sys-max-int,bad-python3-import,deprecated-string-function,deprecated-str-translate-call,import-error,bad-continuation,unspecified-encoding
+# disable=import-error,raw-checker-failed,bad-inline-option,locally-disabled,file-ignored,suppressed-message,useless-suppression,deprecated-pragma,deprecated-str-translate-call
+disable=raw-checker-failed,bad-inline-option,locally-disabled,file-ignored,suppressed-message,useless-suppression,deprecated-pragma,import-error,pointless-string-statement,unspecified-encoding
 
 # Enable the message, report, category or checker with the given id(s). You can
 # either give multiple identifier separated by comma (,) or put this option
@@ -225,12 +225,6 @@ max-line-length=100
 # Maximum number of lines in a module
 max-module-lines=1000
 
-# List of optional constructs for which whitespace checking is disabled. `dict-
-# separator` is used to allow tabulation in dicts, etc.: {1  : 1,\n222: 2}.
-# `trailing-comma` allows a space between comma and closing bracket: (a, ).
-# `empty-line` allows space-only lines.
-no-space-check=trailing-comma,dict-separator
-
 # Allow the body of a class to be on the same line as the declaration if body
 # contains single statement.
 single-line-class-stmt=no
@@ -257,38 +251,22 @@ min-similarity-lines=12
 
 [BASIC]
 
-# Naming hint for argument names
-argument-name-hint=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
-
 # Regular expression matching correct argument names
 argument-rgx=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
 
-# Naming hint for attribute names
-attr-name-hint=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
-
 # Regular expression matching correct attribute names
 attr-rgx=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
 
 # Bad variable names which should always be refused, separated by a comma
 bad-names=foo,bar,baz,toto,tutu,tata
 
-# Naming hint for class attribute names
-class-attribute-name-hint=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$
-
 # Regular expression matching correct class attribute names
 class-attribute-rgx=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$
 
-# Naming hint for class names
-# class-name-hint=[A-Z_][a-zA-Z0-9]+$
-class-name-hint=[A-Z_][a-zA-Z0-9_]+$
-
 # Regular expression matching correct class names
 # class-rgx=[A-Z_][a-zA-Z0-9]+$
 class-rgx=[A-Z_][a-zA-Z0-9_]+$
 
-# Naming hint for constant names
-const-name-hint=(([A-Z_][A-Z0-9_]*)|(__.*__))$
-
 # Regular expression matching correct constant names
 const-rgx=(([A-Z_][A-Z0-9_]*)|(__.*__))$
 
@@ -296,9 +274,6 @@ const-rgx=(([A-Z_][A-Z0-9_]*)|(__.*__))$
 # ones are exempt.
 docstring-min-length=-1
 
-# Naming hint for function names
-function-name-hint=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
-
 # Regular expression matching correct function names
 function-rgx=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
 
@@ -309,21 +284,12 @@ good-names=r,g,b,w,i,j,k,n,x,y,z,ex,ok,Run,_
 # Include a hint for the correct naming format with invalid-name
 include-naming-hint=no
 
-# Naming hint for inline iteration names
-inlinevar-name-hint=[A-Za-z_][A-Za-z0-9_]*$
-
 # Regular expression matching correct inline iteration names
 inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$
 
-# Naming hint for method names
-method-name-hint=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
-
 # Regular expression matching correct method names
 method-rgx=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
 
-# Naming hint for module names
-module-name-hint=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$
-
 # Regular expression matching correct module names
 module-rgx=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$
 
@@ -339,9 +305,6 @@ no-docstring-rgx=^_
 # to this list to register other decorators that produce valid properties.
 property-classes=abc.abstractproperty
 
-# Naming hint for variable names
-variable-name-hint=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
-
 # Regular expression matching correct variable names
 variable-rgx=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
 

From edc14bfbb69fff939c52ab59b00fb75979389432 Mon Sep 17 00:00:00 2001
From: Alec Delaney <89490472+tekktrik@users.noreply.github.com>
Date: Thu, 1 Sep 2022 20:16:31 -0400
Subject: [PATCH 08/19] Add .venv to .gitignore

Signed-off-by: Alec Delaney <89490472+tekktrik@users.noreply.github.com>
---
 .gitignore | 1 +
 1 file changed, 1 insertion(+)

diff --git a/.gitignore b/.gitignore
index 544ec4a..db3d538 100644
--- a/.gitignore
+++ b/.gitignore
@@ -37,6 +37,7 @@ _build
 
 # Virtual environment-specific files
 .env
+.venv
 
 # MacOS-specific files
 *.DS_Store

From b9d9c840c0b86f5d586663ca895f7a0cdc552dbf Mon Sep 17 00:00:00 2001
From: Alec Delaney <89490472+tekktrik@users.noreply.github.com>
Date: Thu, 19 Jan 2023 23:39:55 -0500
Subject: [PATCH 09/19] Add upload url to release action

Signed-off-by: Alec Delaney <89490472+tekktrik@users.noreply.github.com>
---
 .github/workflows/release_gh.yml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/.github/workflows/release_gh.yml b/.github/workflows/release_gh.yml
index b8aa8d6..9acec60 100644
--- a/.github/workflows/release_gh.yml
+++ b/.github/workflows/release_gh.yml
@@ -16,3 +16,4 @@ jobs:
       uses: adafruit/workflows-circuitpython-libs/release-gh@main
       with:
         github-token: ${{ secrets.GITHUB_TOKEN }}
+        upload-url: ${{ github.event.release.upload_url }}

From 913163751903c71d831e2ec557a511e66920a14f Mon Sep 17 00:00:00 2001
From: Tekktrik <tekktrik@gmail.com>
Date: Tue, 9 May 2023 20:26:25 -0400
Subject: [PATCH 10/19] Update pre-commit hooks

Signed-off-by: Tekktrik <tekktrik@gmail.com>
---
 .pre-commit-config.yaml | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/.pre-commit-config.yaml b/.pre-commit-config.yaml
index 0e5fccc..70ade69 100644
--- a/.pre-commit-config.yaml
+++ b/.pre-commit-config.yaml
@@ -4,21 +4,21 @@
 
 repos:
   - repo: https://github.com/python/black
-    rev: 22.3.0
+    rev: 23.3.0
     hooks:
       - id: black
   - repo: https://github.com/fsfe/reuse-tool
-    rev: v0.14.0
+    rev: v1.1.2
     hooks:
       - id: reuse
   - repo: https://github.com/pre-commit/pre-commit-hooks
-    rev: v4.2.0
+    rev: v4.4.0
     hooks:
       - id: check-yaml
       - id: end-of-file-fixer
       - id: trailing-whitespace
   - repo: https://github.com/pycqa/pylint
-    rev: v2.15.5
+    rev: v2.17.4
     hooks:
       - id: pylint
         name: pylint (library code)

From c6f32283bf70b8764ea892ef1afd8d78ce9bdf9e Mon Sep 17 00:00:00 2001
From: Tekktrik <tekktrik@gmail.com>
Date: Sun, 14 May 2023 13:00:32 -0400
Subject: [PATCH 11/19] Update .pylintrc, fix jQuery for docs

Signed-off-by: Tekktrik <tekktrik@gmail.com>
---
 .pylintrc             | 2 +-
 docs/conf.py          | 1 +
 docs/requirements.txt | 1 +
 3 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/.pylintrc b/.pylintrc
index 40208c3..f945e92 100644
--- a/.pylintrc
+++ b/.pylintrc
@@ -396,4 +396,4 @@ min-public-methods=1
 
 # Exceptions that will emit a warning when being caught. Defaults to
 # "Exception"
-overgeneral-exceptions=Exception
+overgeneral-exceptions=builtins.Exception
diff --git a/docs/conf.py b/docs/conf.py
index 97e790c..8146c5e 100644
--- a/docs/conf.py
+++ b/docs/conf.py
@@ -17,6 +17,7 @@
 # ones.
 extensions = [
     "sphinx.ext.autodoc",
+    "sphinxcontrib.jquery",
     "sphinx.ext.intersphinx",
     "sphinx.ext.napoleon",
     "sphinx.ext.todo",
diff --git a/docs/requirements.txt b/docs/requirements.txt
index 88e6733..797aa04 100644
--- a/docs/requirements.txt
+++ b/docs/requirements.txt
@@ -3,3 +3,4 @@
 # SPDX-License-Identifier: Unlicense
 
 sphinx>=4.0.0
+sphinxcontrib-jquery

From ad8d39ecefc491ac32a0d64d0ff30566bf890a04 Mon Sep 17 00:00:00 2001
From: foamyguy <foamyguy@gmail.com>
Date: Mon, 18 Sep 2023 16:20:00 -0500
Subject: [PATCH 12/19] "fix rtd theme "

---
 docs/conf.py | 17 ++++-------------
 1 file changed, 4 insertions(+), 13 deletions(-)

diff --git a/docs/conf.py b/docs/conf.py
index 8146c5e..c266fa2 100644
--- a/docs/conf.py
+++ b/docs/conf.py
@@ -101,19 +101,10 @@
 # The theme to use for HTML and HTML Help pages.  See the documentation for
 # a list of builtin themes.
 #
-on_rtd = os.environ.get("READTHEDOCS", None) == "True"
-
-if not on_rtd:  # only import and set the theme if we're building docs locally
-    try:
-        import sphinx_rtd_theme
-
-        html_theme = "sphinx_rtd_theme"
-        html_theme_path = [sphinx_rtd_theme.get_html_theme_path(), "."]
-    except:
-        html_theme = "default"
-        html_theme_path = ["."]
-else:
-    html_theme_path = ["."]
+import sphinx_rtd_theme
+
+html_theme = "sphinx_rtd_theme"
+html_theme_path = [sphinx_rtd_theme.get_html_theme_path(), "."]
 
 # Add any paths that contain custom static files (such as style sheets) here,
 # relative to this directory. They are copied after the builtin static files,

From 99f51a336bf63be4fc34bedb54d88b0eea653c84 Mon Sep 17 00:00:00 2001
From: foamyguy <foamyguy@gmail.com>
Date: Mon, 16 Oct 2023 14:30:31 -0500
Subject: [PATCH 13/19] unpin sphinx and add sphinx-rtd-theme to docs reqs

Signed-off-by: foamyguy <foamyguy@gmail.com>
---
 docs/requirements.txt | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/docs/requirements.txt b/docs/requirements.txt
index 797aa04..979f568 100644
--- a/docs/requirements.txt
+++ b/docs/requirements.txt
@@ -2,5 +2,6 @@
 #
 # SPDX-License-Identifier: Unlicense
 
-sphinx>=4.0.0
+sphinx
 sphinxcontrib-jquery
+sphinx-rtd-theme

From d023bafd534a0d267857d3648bd2b4ac0f963cdb Mon Sep 17 00:00:00 2001
From: foamyguy <foamyguy@gmail.com>
Date: Mon, 7 Oct 2024 09:24:05 -0500
Subject: [PATCH 14/19] remove deprecated get_html_theme_path() call

Signed-off-by: foamyguy <foamyguy@gmail.com>
---
 docs/conf.py | 1 -
 1 file changed, 1 deletion(-)

diff --git a/docs/conf.py b/docs/conf.py
index c266fa2..b837fbf 100644
--- a/docs/conf.py
+++ b/docs/conf.py
@@ -104,7 +104,6 @@
 import sphinx_rtd_theme
 
 html_theme = "sphinx_rtd_theme"
-html_theme_path = [sphinx_rtd_theme.get_html_theme_path(), "."]
 
 # Add any paths that contain custom static files (such as style sheets) here,
 # relative to this directory. They are copied after the builtin static files,

From 535885626eb8c598da07c35debd6e2fef3b460bf Mon Sep 17 00:00:00 2001
From: foamyguy <foamyguy@gmail.com>
Date: Tue, 14 Jan 2025 11:32:34 -0600
Subject: [PATCH 15/19] add sphinx configuration to rtd.yaml

Signed-off-by: foamyguy <foamyguy@gmail.com>
---
 .readthedocs.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/.readthedocs.yaml b/.readthedocs.yaml
index 33c2a61..88bca9f 100644
--- a/.readthedocs.yaml
+++ b/.readthedocs.yaml
@@ -8,6 +8,9 @@
 # Required
 version: 2
 
+sphinx:
+  configuration: docs/conf.py
+
 build:
   os: ubuntu-20.04
   tools:

From 5ca3614b75548fd5b4140e48793ef66750873b83 Mon Sep 17 00:00:00 2001
From: Justin Myers <justmobilize@users.noreply.github.com>
Date: Thu, 27 Feb 2025 15:37:05 -0800
Subject: [PATCH 16/19] Remove secrets usage

---
 README.rst                                 |  2 +-
 examples/ble_broadcastnet_blinka_bridge.py | 11 ++++++--
 examples/ble_broadcastnet_bridge.py        | 33 +++++++++++++---------
 3 files changed, 29 insertions(+), 17 deletions(-)

diff --git a/README.rst b/README.rst
index e6fe22e..87e50bd 100644
--- a/README.rst
+++ b/README.rst
@@ -60,7 +60,7 @@ To install in a virtual environment in your current project:
 Usage Example
 =============
 
-Add a secrets.py file and then run ``ble_broadcastnet_blinka_bridge.py``.
+Add a settings.toml file and then run ``ble_broadcastnet_blinka_bridge.py``.
 
 Documentation
 =============
diff --git a/examples/ble_broadcastnet_blinka_bridge.py b/examples/ble_broadcastnet_blinka_bridge.py
index fed47ae..87e9940 100644
--- a/examples/ble_broadcastnet_blinka_bridge.py
+++ b/examples/ble_broadcastnet_blinka_bridge.py
@@ -2,15 +2,20 @@
 # SPDX-License-Identifier: MIT
 
 """This example bridges from BLE to Adafruit IO on a Raspberry Pi."""
-from secrets import secrets  # pylint: disable=no-name-in-module
+from os import getenv
 import time
 import requests
 from adafruit_ble.advertising.standard import ManufacturerDataField
 import adafruit_ble
 import adafruit_ble_broadcastnet
 
-aio_auth_header = {"X-AIO-KEY": secrets["aio_key"]}
-aio_base_url = "https://io.adafruit.com/api/v2/" + secrets["aio_username"]
+# Get Adafruit IO keys, ensure these are setup in your environment
+# (visit io.adafruit.com if you need to create an account, or if you need your Adafruit IO key.)
+aio_username = getenv("ADAFRUIT_AIO_USERNAME")
+aio_key = getenv("ADAFRUIT_AIO_KEY")
+
+aio_auth_header = {"X-AIO-KEY": aio_key}
+aio_base_url = f"https://io.adafruit.com/api/v2/{aio_username}"
 
 
 def aio_post(path, **kwargs):
diff --git a/examples/ble_broadcastnet_bridge.py b/examples/ble_broadcastnet_bridge.py
index 4609d54..3d66f76 100644
--- a/examples/ble_broadcastnet_bridge.py
+++ b/examples/ble_broadcastnet_bridge.py
@@ -3,14 +3,13 @@
 
 """This example bridges from BLE to Adafruit IO on a CircuitPython device that
    supports both WiFi and BLE. (The first chip is the ESP32-S3.)"""
-from secrets import secrets  # pylint: disable=no-name-in-module
-import ssl
+from os import getenv
 import time
+import adafruit_connection_manager
 import adafruit_requests as requests
 from adafruit_ble.advertising.standard import ManufacturerDataField
 import adafruit_ble
 import board
-import socketpool
 import wifi
 import adafruit_ble_broadcastnet
 
@@ -24,16 +23,24 @@
         print("No status pixel due to missing library")
         neopixel = None
 
-aio_auth_header = {"X-AIO-KEY": secrets["aio_key"]}
-aio_base_url = "https://io.adafruit.com/api/v2/" + secrets["aio_username"]
+# Get WiFi details and Adafruit IO keys, ensure these are setup in settings.toml
+# (visit io.adafruit.com if you need to create an account, or if you need your Adafruit IO key.)
+ssid = getenv("CIRCUITPY_WIFI_SSID")
+password = getenv("CIRCUITPY_WIFI_PASSWORD")
+aio_username = getenv("ADAFRUIT_AIO_USERNAME")
+aio_key = getenv("ADAFRUIT_AIO_KEY")
 
-print("Connecting to %s" % secrets["ssid"])
-wifi.radio.connect(secrets["ssid"], secrets["password"])
-print("Connected to %s!" % secrets["ssid"])
-print("My IP address is", wifi.radio.ipv4_address)
+aio_auth_header = {"X-AIO-KEY": aio_key}
+aio_base_url = f"https://io.adafruit.com/api/v2/{aio_username}"
 
-socket = socketpool.SocketPool(wifi.radio)
-https = requests.Session(socket, ssl.create_default_context())
+print(f"Connecting to {ssid}")
+wifi.radio.connect(ssid, password)
+print(f"Connected to {ssid}!")
+print(f"My IP address is {wifi.radio.ipv4_address}")
+
+pool = adafruit_connection_manager.get_radio_socketpool(wifi.radio)
+ssl_context = adafruit_connection_manager.get_radio_ssl_context(wifi.radio)
+requests = requests.Session(pool, ssl_context)
 
 status_pixel = None
 if neopixel and hasattr(board, "NEOPIXEL"):
@@ -42,12 +49,12 @@
 
 def aio_post(path, **kwargs):
     kwargs["headers"] = aio_auth_header
-    return https.post(aio_base_url + path, **kwargs)
+    return requests.post(aio_base_url + path, **kwargs)
 
 
 def aio_get(path, **kwargs):
     kwargs["headers"] = aio_auth_header
-    return https.get(aio_base_url + path, **kwargs)
+    return requests.get(aio_base_url + path, **kwargs)
 
 
 # Disable outer names check because we frequently collide.

From dbd3761fa8506d53f6efc7aedd1ea9548f270e96 Mon Sep 17 00:00:00 2001
From: Justin Myers <justmobilize@users.noreply.github.com>
Date: Tue, 4 Mar 2025 09:29:17 -0800
Subject: [PATCH 17/19] Update blinka example

---
 examples/ble_broadcastnet_blinka_bridge.py | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/examples/ble_broadcastnet_blinka_bridge.py b/examples/ble_broadcastnet_blinka_bridge.py
index 87e9940..30007fb 100644
--- a/examples/ble_broadcastnet_blinka_bridge.py
+++ b/examples/ble_broadcastnet_blinka_bridge.py
@@ -6,11 +6,13 @@
 import time
 import requests
 from adafruit_ble.advertising.standard import ManufacturerDataField
+from adafruit_blinka import load_settings_toml
 import adafruit_ble
 import adafruit_ble_broadcastnet
 
-# Get Adafruit IO keys, ensure these are setup in your environment
+# Get Adafruit IO keys, ensure these are setup in settings.toml
 # (visit io.adafruit.com if you need to create an account, or if you need your Adafruit IO key.)
+load_settings_toml()
 aio_username = getenv("ADAFRUIT_AIO_USERNAME")
 aio_key = getenv("ADAFRUIT_AIO_KEY")
 

From c7bf07d6c2368e4cd77fb6e0dbbd71d33c7d6db9 Mon Sep 17 00:00:00 2001
From: foamyguy <foamyguy@gmail.com>
Date: Thu, 15 May 2025 21:06:41 +0000
Subject: [PATCH 18/19] change to ruff

---
 .gitattributes                                |  11 +
 .pre-commit-config.yaml                       |  43 +-
 .pylintrc                                     | 399 ------------------
 README.rst                                    |   6 +-
 adafruit_ble_broadcastnet.py                  |  37 +-
 docs/api.rst                                  |   3 +
 docs/conf.py                                  |   8 +-
 examples/ble_broadcastnet_battery_level.py    |  13 +-
 ...ble_broadcastnet_battery_level_neopixel.py |  13 +-
 examples/ble_broadcastnet_blinka_bridge.py    |  27 +-
 examples/ble_broadcastnet_bridge.py           |  31 +-
 examples/ble_broadcastnet_cpb.py              |   2 +
 examples/ble_broadcastnet_expo_backoff.py     |  17 +-
 examples/ble_broadcastnet_multisensor.py      |   6 +-
 examples/ble_broadcastnet_scan_test.py        |   5 +-
 examples/ble_broadcastnet_simpletest.py       |   8 +-
 ruff.toml                                     | 107 +++++
 17 files changed, 203 insertions(+), 533 deletions(-)
 create mode 100644 .gitattributes
 delete mode 100644 .pylintrc
 create mode 100644 ruff.toml

diff --git a/.gitattributes b/.gitattributes
new file mode 100644
index 0000000..21c125c
--- /dev/null
+++ b/.gitattributes
@@ -0,0 +1,11 @@
+# SPDX-FileCopyrightText: 2024 Justin Myers for Adafruit Industries
+#
+# SPDX-License-Identifier: Unlicense
+
+.py text eol=lf
+.rst text eol=lf
+.txt text eol=lf
+.yaml text eol=lf
+.toml text eol=lf
+.license text eol=lf
+.md text eol=lf
diff --git a/.pre-commit-config.yaml b/.pre-commit-config.yaml
index 70ade69..ff19dde 100644
--- a/.pre-commit-config.yaml
+++ b/.pre-commit-config.yaml
@@ -1,42 +1,21 @@
-# SPDX-FileCopyrightText: 2020 Diego Elio Pettenò
+# SPDX-FileCopyrightText: 2024 Justin Myers for Adafruit Industries
 #
 # SPDX-License-Identifier: Unlicense
 
 repos:
-  - repo: https://github.com/python/black
-    rev: 23.3.0
-    hooks:
-      - id: black
-  - repo: https://github.com/fsfe/reuse-tool
-    rev: v1.1.2
-    hooks:
-      - id: reuse
   - repo: https://github.com/pre-commit/pre-commit-hooks
-    rev: v4.4.0
+    rev: v4.5.0
     hooks:
       - id: check-yaml
       - id: end-of-file-fixer
       - id: trailing-whitespace
-  - repo: https://github.com/pycqa/pylint
-    rev: v2.17.4
+  - repo: https://github.com/astral-sh/ruff-pre-commit
+    rev: v0.3.4
     hooks:
-      - id: pylint
-        name: pylint (library code)
-        types: [python]
-        args:
-          - --disable=consider-using-f-string
-        exclude: "^(docs/|examples/|tests/|setup.py$)"
-      - id: pylint
-        name: pylint (example code)
-        description: Run pylint rules on "examples/*.py" files
-        types: [python]
-        files: "^examples/"
-        args:
-          - --disable=missing-docstring,invalid-name,consider-using-f-string,duplicate-code
-      - id: pylint
-        name: pylint (test code)
-        description: Run pylint rules on "tests/*.py" files
-        types: [python]
-        files: "^tests/"
-        args:
-          - --disable=missing-docstring,consider-using-f-string,duplicate-code
+      - id: ruff-format
+      - id: ruff
+        args: ["--fix"]
+  - repo: https://github.com/fsfe/reuse-tool
+    rev: v3.0.1
+    hooks:
+      - id: reuse
diff --git a/.pylintrc b/.pylintrc
deleted file mode 100644
index f945e92..0000000
--- a/.pylintrc
+++ /dev/null
@@ -1,399 +0,0 @@
-# SPDX-FileCopyrightText: 2017 Scott Shawcroft, written for Adafruit Industries
-#
-# SPDX-License-Identifier: Unlicense
-
-[MASTER]
-
-# A comma-separated list of package or module names from where C extensions may
-# be loaded. Extensions are loading into the active Python interpreter and may
-# run arbitrary code
-extension-pkg-whitelist=
-
-# Add files or directories to the ignore-list. They should be base names, not
-# paths.
-ignore=CVS
-
-# Add files or directories matching the regex patterns to the ignore-list. The
-# regex matches against base names, not paths.
-ignore-patterns=
-
-# Python code to execute, usually for sys.path manipulation such as
-# pygtk.require().
-#init-hook=
-
-# Use multiple processes to speed up Pylint.
-jobs=1
-
-# List of plugins (as comma separated values of python modules names) to load,
-# usually to register additional checkers.
-load-plugins=pylint.extensions.no_self_use
-
-# Pickle collected data for later comparisons.
-persistent=yes
-
-# Specify a configuration file.
-#rcfile=
-
-# Allow loading of arbitrary C extensions. Extensions are imported into the
-# active Python interpreter and may run arbitrary code.
-unsafe-load-any-extension=no
-
-
-[MESSAGES CONTROL]
-
-# Only show warnings with the listed confidence levels. Leave empty to show
-# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED
-confidence=
-
-# Disable the message, report, category or checker with the given id(s). You
-# can either give multiple identifiers separated by comma (,) or put this
-# option multiple times (only on the command line, not in the configuration
-# file where it should appear only once).You can also use "--disable=all" to
-# disable everything first and then reenable specific checks. For example, if
-# you want to run only the similarities checker, you can use "--disable=all
-# --enable=similarities". If you want to run only the classes checker, but have
-# no Warning level messages displayed, use"--disable=all --enable=classes
-# --disable=W"
-# disable=import-error,raw-checker-failed,bad-inline-option,locally-disabled,file-ignored,suppressed-message,useless-suppression,deprecated-pragma,deprecated-str-translate-call
-disable=raw-checker-failed,bad-inline-option,locally-disabled,file-ignored,suppressed-message,useless-suppression,deprecated-pragma,import-error,pointless-string-statement,unspecified-encoding
-
-# Enable the message, report, category or checker with the given id(s). You can
-# either give multiple identifier separated by comma (,) or put this option
-# multiple time (only on the command line, not in the configuration file where
-# it should appear only once). See also the "--disable" option for examples.
-enable=
-
-
-[REPORTS]
-
-# Python expression which should return a note less than 10 (10 is the highest
-# note). You have access to the variables errors warning, statement which
-# respectively contain the number of errors / warnings messages and the total
-# number of statements analyzed. This is used by the global evaluation report
-# (RP0004).
-evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)
-
-# Template used to display messages. This is a python new-style format string
-# used to format the message information. See doc for all details
-#msg-template=
-
-# Set the output format. Available formats are text, parseable, colorized, json
-# and msvs (visual studio).You can also give a reporter class, eg
-# mypackage.mymodule.MyReporterClass.
-output-format=text
-
-# Tells whether to display a full report or only the messages
-reports=no
-
-# Activate the evaluation score.
-score=yes
-
-
-[REFACTORING]
-
-# Maximum number of nested blocks for function / method body
-max-nested-blocks=5
-
-
-[LOGGING]
-
-# Logging modules to check that the string format arguments are in logging
-# function parameter format
-logging-modules=logging
-
-
-[SPELLING]
-
-# Spelling dictionary name. Available dictionaries: none. To make it working
-# install python-enchant package.
-spelling-dict=
-
-# List of comma separated words that should not be checked.
-spelling-ignore-words=
-
-# A path to a file that contains private dictionary; one word per line.
-spelling-private-dict-file=
-
-# Tells whether to store unknown words to indicated private dictionary in
-# --spelling-private-dict-file option instead of raising a message.
-spelling-store-unknown-words=no
-
-
-[MISCELLANEOUS]
-
-# List of note tags to take in consideration, separated by a comma.
-# notes=FIXME,XXX,TODO
-notes=FIXME,XXX
-
-
-[TYPECHECK]
-
-# List of decorators that produce context managers, such as
-# contextlib.contextmanager. Add to this list to register other decorators that
-# produce valid context managers.
-contextmanager-decorators=contextlib.contextmanager
-
-# List of members which are set dynamically and missed by pylint inference
-# system, and so shouldn't trigger E1101 when accessed. Python regular
-# expressions are accepted.
-generated-members=
-
-# Tells whether missing members accessed in mixin class should be ignored. A
-# mixin class is detected if its name ends with "mixin" (case insensitive).
-ignore-mixin-members=yes
-
-# This flag controls whether pylint should warn about no-member and similar
-# checks whenever an opaque object is returned when inferring. The inference
-# can return multiple potential results while evaluating a Python object, but
-# some branches might not be evaluated, which results in partial inference. In
-# that case, it might be useful to still emit no-member and other checks for
-# the rest of the inferred objects.
-ignore-on-opaque-inference=yes
-
-# List of class names for which member attributes should not be checked (useful
-# for classes with dynamically set attributes). This supports the use of
-# qualified names.
-ignored-classes=optparse.Values,thread._local,_thread._local
-
-# List of module names for which member attributes should not be checked
-# (useful for modules/projects where namespaces are manipulated during runtime
-# and thus existing member attributes cannot be deduced by static analysis. It
-# supports qualified module names, as well as Unix pattern matching.
-ignored-modules=board
-
-# Show a hint with possible names when a member name was not found. The aspect
-# of finding the hint is based on edit distance.
-missing-member-hint=yes
-
-# The minimum edit distance a name should have in order to be considered a
-# similar match for a missing member name.
-missing-member-hint-distance=1
-
-# The total number of similar names that should be taken in consideration when
-# showing a hint for a missing member.
-missing-member-max-choices=1
-
-
-[VARIABLES]
-
-# List of additional names supposed to be defined in builtins. Remember that
-# you should avoid to define new builtins when possible.
-additional-builtins=
-
-# Tells whether unused global variables should be treated as a violation.
-allow-global-unused-variables=yes
-
-# List of strings which can identify a callback function by name. A callback
-# name must start or end with one of those strings.
-callbacks=cb_,_cb
-
-# A regular expression matching the name of dummy variables (i.e. expectedly
-# not used).
-dummy-variables-rgx=_+$|(_[a-zA-Z0-9_]*[a-zA-Z0-9]+?$)|dummy|^ignored_|^unused_
-
-# Argument names that match this expression will be ignored. Default to name
-# with leading underscore
-ignored-argument-names=_.*|^ignored_|^unused_
-
-# Tells whether we should check for unused import in __init__ files.
-init-import=no
-
-# List of qualified module names which can have objects that can redefine
-# builtins.
-redefining-builtins-modules=six.moves,future.builtins
-
-
-[FORMAT]
-
-# Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
-# expected-line-ending-format=
-expected-line-ending-format=LF
-
-# Regexp for a line that is allowed to be longer than the limit.
-ignore-long-lines=^\s*(# )?<?https?://\S+>?$
-
-# Number of spaces of indent required inside a hanging  or continued line.
-indent-after-paren=4
-
-# String used as indentation unit. This is usually "    " (4 spaces) or "\t" (1
-# tab).
-indent-string='    '
-
-# Maximum number of characters on a single line.
-max-line-length=100
-
-# Maximum number of lines in a module
-max-module-lines=1000
-
-# Allow the body of a class to be on the same line as the declaration if body
-# contains single statement.
-single-line-class-stmt=no
-
-# Allow the body of an if to be on the same line as the test if there is no
-# else.
-single-line-if-stmt=no
-
-
-[SIMILARITIES]
-
-# Ignore comments when computing similarities.
-ignore-comments=yes
-
-# Ignore docstrings when computing similarities.
-ignore-docstrings=yes
-
-# Ignore imports when computing similarities.
-ignore-imports=yes
-
-# Minimum lines number of a similarity.
-min-similarity-lines=12
-
-
-[BASIC]
-
-# Regular expression matching correct argument names
-argument-rgx=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
-
-# Regular expression matching correct attribute names
-attr-rgx=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
-
-# Bad variable names which should always be refused, separated by a comma
-bad-names=foo,bar,baz,toto,tutu,tata
-
-# Regular expression matching correct class attribute names
-class-attribute-rgx=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$
-
-# Regular expression matching correct class names
-# class-rgx=[A-Z_][a-zA-Z0-9]+$
-class-rgx=[A-Z_][a-zA-Z0-9_]+$
-
-# Regular expression matching correct constant names
-const-rgx=(([A-Z_][A-Z0-9_]*)|(__.*__))$
-
-# Minimum line length for functions/classes that require docstrings, shorter
-# ones are exempt.
-docstring-min-length=-1
-
-# Regular expression matching correct function names
-function-rgx=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
-
-# Good variable names which should always be accepted, separated by a comma
-# good-names=i,j,k,ex,Run,_
-good-names=r,g,b,w,i,j,k,n,x,y,z,ex,ok,Run,_
-
-# Include a hint for the correct naming format with invalid-name
-include-naming-hint=no
-
-# Regular expression matching correct inline iteration names
-inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$
-
-# Regular expression matching correct method names
-method-rgx=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
-
-# Regular expression matching correct module names
-module-rgx=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$
-
-# Colon-delimited sets of names that determine each other's naming style when
-# the name regexes allow several styles.
-name-group=
-
-# Regular expression which should only match function or class names that do
-# not require a docstring.
-no-docstring-rgx=^_
-
-# List of decorators that produce properties, such as abc.abstractproperty. Add
-# to this list to register other decorators that produce valid properties.
-property-classes=abc.abstractproperty
-
-# Regular expression matching correct variable names
-variable-rgx=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
-
-
-[IMPORTS]
-
-# Allow wildcard imports from modules that define __all__.
-allow-wildcard-with-all=no
-
-# Analyse import fallback blocks. This can be used to support both Python 2 and
-# 3 compatible code, which means that the block might have code that exists
-# only in one or another interpreter, leading to false positives when analysed.
-analyse-fallback-blocks=no
-
-# Deprecated modules which should not be used, separated by a comma
-deprecated-modules=optparse,tkinter.tix
-
-# Create a graph of external dependencies in the given file (report RP0402 must
-# not be disabled)
-ext-import-graph=
-
-# Create a graph of every (i.e. internal and external) dependencies in the
-# given file (report RP0402 must not be disabled)
-import-graph=
-
-# Create a graph of internal dependencies in the given file (report RP0402 must
-# not be disabled)
-int-import-graph=
-
-# Force import order to recognize a module as part of the standard
-# compatibility libraries.
-known-standard-library=
-
-# Force import order to recognize a module as part of a third party library.
-known-third-party=enchant
-
-
-[CLASSES]
-
-# List of method names used to declare (i.e. assign) instance attributes.
-defining-attr-methods=__init__,__new__,setUp
-
-# List of member names, which should be excluded from the protected access
-# warning.
-exclude-protected=_asdict,_fields,_replace,_source,_make
-
-# List of valid names for the first argument in a class method.
-valid-classmethod-first-arg=cls
-
-# List of valid names for the first argument in a metaclass class method.
-valid-metaclass-classmethod-first-arg=mcs
-
-
-[DESIGN]
-
-# Maximum number of arguments for function / method
-max-args=5
-
-# Maximum number of attributes for a class (see R0902).
-# max-attributes=7
-max-attributes=11
-
-# Maximum number of boolean expressions in a if statement
-max-bool-expr=5
-
-# Maximum number of branch for function / method body
-max-branches=12
-
-# Maximum number of locals for function / method body
-max-locals=15
-
-# Maximum number of parents for a class (see R0901).
-max-parents=7
-
-# Maximum number of public methods for a class (see R0904).
-max-public-methods=20
-
-# Maximum number of return / yield for function / method body
-max-returns=6
-
-# Maximum number of statements in function / method body
-max-statements=50
-
-# Minimum number of public methods for a class (see R0903).
-min-public-methods=1
-
-
-[EXCEPTIONS]
-
-# Exceptions that will emit a warning when being caught. Defaults to
-# "Exception"
-overgeneral-exceptions=builtins.Exception
diff --git a/README.rst b/README.rst
index 87e50bd..c5d68e6 100644
--- a/README.rst
+++ b/README.rst
@@ -13,9 +13,9 @@ Introduction
     :target: https://github.com/adafruit/Adafruit_CircuitPython_BLE_BroadcastNet/actions
     :alt: Build Status
 
-.. image:: https://img.shields.io/badge/code%20style-black-000000.svg
-    :target: https://github.com/psf/black
-    :alt: Code Style: Black
+.. image:: https://img.shields.io/endpoint?url=https://raw.githubusercontent.com/astral-sh/ruff/main/assets/badge/v2.json
+    :target: https://github.com/astral-sh/ruff
+    :alt: Code Style: Ruff
 
 Basic IOT over BLE advertisements.
 
diff --git a/adafruit_ble_broadcastnet.py b/adafruit_ble_broadcastnet.py
index e3f93ba..3ffb494 100644
--- a/adafruit_ble_broadcastnet.py
+++ b/adafruit_ble_broadcastnet.py
@@ -12,19 +12,21 @@
 * Author(s): Scott Shawcroft
 """
 
-import struct
 import os
+import struct
 import time
+
 import adafruit_ble
 from adafruit_ble.advertising import Advertisement, LazyObjectField
-from adafruit_ble.advertising.standard import ManufacturerData, ManufacturerDataField
 from adafruit_ble.advertising.adafruit import (
-    MANUFACTURING_DATA_ADT,
     ADAFRUIT_COMPANY_ID,
+    MANUFACTURING_DATA_ADT,
 )
+from adafruit_ble.advertising.standard import ManufacturerData, ManufacturerDataField
 
 try:
     from typing import Optional
+
     from _bleio import ScanEntry
 except ImportError:
     pass
@@ -32,21 +34,18 @@
 __version__ = "0.0.0+auto.0"
 __repo__ = "https://github.com/adafruit/Adafruit_CircuitPython_BLE_BroadcastNet.git"
 
-_ble = adafruit_ble.BLERadio()  # pylint: disable=invalid-name
-_sequence_number = 0  # pylint: disable=invalid-name
+_ble = adafruit_ble.BLERadio()
+_sequence_number = 0
 
 
 def broadcast(
-    measurement: "AdafruitSensorMeasurement",
-    *,
-    broadcast_time: float = 0.1,
-    extended: bool = False
+    measurement: "AdafruitSensorMeasurement", *, broadcast_time: float = 0.1, extended: bool = False
 ) -> None:
     """Broadcasts the given measurement for the given broadcast time. If extended is False and the
     measurement would be too long, it will be split into multiple measurements for transmission,
     each with the given broadcast time.
     """
-    global _sequence_number  # pylint: disable=global-statement,invalid-name
+    global _sequence_number  # noqa: PLW0603
     for submeasurement in measurement.split(252 if extended else 31):
         submeasurement.sequence_number = _sequence_number
         _ble.start_advertising(submeasurement, scan_response=None)
@@ -59,16 +58,12 @@ def broadcast(
 if not hasattr(os, "environ") or (
     "GITHUB_ACTION" not in os.environ and "READTHEDOCS" not in os.environ
 ):
-    if _ble._adapter.address:  # pylint: disable=protected-access
-        device_address = "{:02x}{:02x}{:02x}{:02x}{:02x}{:02x}".format(  # pylint: disable=invalid-name
-            *reversed(
-                list(
-                    _ble._adapter.address.address_bytes  # pylint: disable=protected-access
-                )
-            )
+    if _ble._adapter.address:
+        device_address = "{:02x}{:02x}{:02x}{:02x}{:02x}{:02x}".format(
+            *reversed(list(_ble._adapter.address.address_bytes))
         )
     else:
-        device_address = "000000000000"  # pylint: disable=invalid-name
+        device_address = "000000000000"
         """Device address as a string."""
 
 
@@ -162,9 +157,7 @@ class AdafruitSensorMeasurement(Advertisement):
     sound_level = ManufacturerDataField(0x0A16, "<f")
     "Sound level as a float"
 
-    def __init__(
-        self, *, entry: Optional[ScanEntry] = None, sequence_number: int = 0
-    ) -> None:
+    def __init__(self, *, entry: Optional[ScanEntry] = None, sequence_number: int = 0) -> None:
         super().__init__(entry=entry)
         if entry:
             return
@@ -177,7 +170,7 @@ def __str__(self) -> str:
             if issubclass(attribute_instance.__class__, ManufacturerDataField):
                 value = getattr(self, attr)
                 if value is not None:
-                    parts.append("{}={}".format(attr, str(value)))
+                    parts.append(f"{attr}={str(value)}")
         return "<{} {} >".format(self.__class__.__name__, " ".join(parts))
 
     def split(self, max_packet_size: int = 31) -> "AdafruitSensorMeasurement":
diff --git a/docs/api.rst b/docs/api.rst
index 3bef10b..9f7e736 100644
--- a/docs/api.rst
+++ b/docs/api.rst
@@ -4,5 +4,8 @@
 .. If your library file(s) are nested in a directory (e.g. /adafruit_foo/foo.py)
 .. use this format as the module name: "adafruit_foo.foo"
 
+API Reference
+#############
+
 .. automodule:: adafruit_ble_broadcastnet
    :members:
diff --git a/docs/conf.py b/docs/conf.py
index b837fbf..c457355 100644
--- a/docs/conf.py
+++ b/docs/conf.py
@@ -1,12 +1,10 @@
-# -*- coding: utf-8 -*-
-
 # SPDX-FileCopyrightText: 2021 ladyada for Adafruit Industries
 #
 # SPDX-License-Identifier: MIT
 
+import datetime
 import os
 import sys
-import datetime
 
 sys.path.insert(0, os.path.abspath(".."))
 
@@ -48,9 +46,7 @@
 creation_year = "2020"
 current_year = str(datetime.datetime.now().year)
 year_duration = (
-    current_year
-    if current_year == creation_year
-    else creation_year + " - " + current_year
+    current_year if current_year == creation_year else creation_year + " - " + current_year
 )
 copyright = year_duration + " Scott Shawcroft"
 author = "Scott Shawcroft"
diff --git a/examples/ble_broadcastnet_battery_level.py b/examples/ble_broadcastnet_battery_level.py
index 367fd52..da96c6f 100644
--- a/examples/ble_broadcastnet_battery_level.py
+++ b/examples/ble_broadcastnet_battery_level.py
@@ -2,9 +2,11 @@
 # SPDX-License-Identifier: MIT
 
 import time
+
 import analogio
 import board
 import microcontroller
+
 import adafruit_ble_broadcastnet
 
 print("This is BroadcastNet sensor:", adafruit_ble_broadcastnet.device_address)
@@ -14,16 +16,9 @@
 
 while True:
     measurement = adafruit_ble_broadcastnet.AdafruitSensorMeasurement()
-    battery_voltage = (
-        battery.value
-        / 2**16
-        * divider_ratio
-        * battery.reference_voltage  # pylint: disable=no-member
-    )
+    battery_voltage = battery.value / 2**16 * divider_ratio * battery.reference_voltage
     measurement.battery_voltage = int(battery_voltage * 1000)
-    measurement.temperature = (
-        microcontroller.cpu.temperature  # pylint: disable=no-member
-    )
+    measurement.temperature = microcontroller.cpu.temperature
     print(measurement)
     adafruit_ble_broadcastnet.broadcast(measurement)
 
diff --git a/examples/ble_broadcastnet_battery_level_neopixel.py b/examples/ble_broadcastnet_battery_level_neopixel.py
index f01c585..4e86b83 100644
--- a/examples/ble_broadcastnet_battery_level_neopixel.py
+++ b/examples/ble_broadcastnet_battery_level_neopixel.py
@@ -2,10 +2,12 @@
 # SPDX-License-Identifier: MIT
 
 import time
+
 import analogio
 import board
 import microcontroller
 import neopixel
+
 import adafruit_ble_broadcastnet
 
 print("This is BroadcastNet sensor:", adafruit_ble_broadcastnet.device_address)
@@ -17,21 +19,14 @@
 
 while True:
     measurement = adafruit_ble_broadcastnet.AdafruitSensorMeasurement()
-    battery_voltage = (
-        battery.value
-        / 2**16
-        * divider_ratio
-        * battery.reference_voltage  # pylint: disable=no-member
-    )
+    battery_voltage = battery.value / 2**16 * divider_ratio * battery.reference_voltage
     r = 16 - int(((battery_voltage - 3.6) / 0.6) * 16)
     r = min(16, max(r, 0))
     g = int(((battery_voltage - 3.6) / 0.6) * 16)
     g = min(16, max(g, 0))
     pixel[0] = r << 16 | g << 8
     measurement.battery_voltage = int(battery_voltage * 1000)
-    measurement.temperature = (
-        microcontroller.cpu.temperature  # pylint: disable=no-member
-    )
+    measurement.temperature = microcontroller.cpu.temperature
     print(measurement)
     adafruit_ble_broadcastnet.broadcast(measurement)
     pixel[0] = 0
diff --git a/examples/ble_broadcastnet_blinka_bridge.py b/examples/ble_broadcastnet_blinka_bridge.py
index 30007fb..735a09f 100644
--- a/examples/ble_broadcastnet_blinka_bridge.py
+++ b/examples/ble_broadcastnet_blinka_bridge.py
@@ -2,12 +2,15 @@
 # SPDX-License-Identifier: MIT
 
 """This example bridges from BLE to Adafruit IO on a Raspberry Pi."""
-from os import getenv
+
 import time
+from os import getenv
+
+import adafruit_ble
 import requests
 from adafruit_ble.advertising.standard import ManufacturerDataField
 from adafruit_blinka import load_settings_toml
-import adafruit_ble
+
 import adafruit_ble_broadcastnet
 
 # Get Adafruit IO keys, ensure these are setup in settings.toml
@@ -30,10 +33,6 @@ def aio_get(path, **kwargs):
     return requests.get(aio_base_url + path, **kwargs)
 
 
-# Disable outer names check because we frequently collide.
-# pylint: disable=redefined-outer-name
-
-
 def create_group(name):
     response = aio_post("/groups", json={"name": name})
     if response.status_code != 201:
@@ -45,9 +44,7 @@ def create_group(name):
 
 
 def create_feed(group_key, name):
-    response = aio_post(
-        "/groups/{}/feeds".format(group_key), json={"feed": {"name": name}}
-    )
+    response = aio_post(f"/groups/{group_key}/feeds", json={"feed": {"name": name}})
     if response.status_code != 201:
         print(name)
         print(response.content)
@@ -57,7 +54,7 @@ def create_feed(group_key, name):
 
 
 def create_data(group_key, data):
-    response = aio_post("/groups/{}/data".format(group_key), json={"feeds": data})
+    response = aio_post(f"/groups/{group_key}/data", json={"feeds": data})
     if response.status_code == 429:
         print("Throttled!")
         return False
@@ -132,9 +129,9 @@ def convert_to_feed_data(values, attribute_name, attribute_instance):
     number_missed = measurement.sequence_number - sequence_numbers[sensor_address] - 1
     if number_missed < 0:
         number_missed += 256
-    group_key = "bridge-{}-sensor-{}".format(bridge_address, sensor_address)
+    group_key = f"bridge-{bridge_address}-sensor-{sensor_address}"
     if sensor_address not in existing_feeds:
-        create_group("Bridge {} Sensor {}".format(bridge_address, sensor_address))
+        create_group(f"Bridge {bridge_address} Sensor {sensor_address}")
         create_feed(group_key, "Missed Message Count")
         existing_feeds[sensor_address] = ["missed-message-count"]
 
@@ -145,9 +142,7 @@ def convert_to_feed_data(values, attribute_name, attribute_instance):
             if attribute != "sequence_number":
                 values = getattr(measurement, attribute)
                 if values is not None:
-                    data.extend(
-                        convert_to_feed_data(values, attribute, attribute_instance)
-                    )
+                    data.extend(convert_to_feed_data(values, attribute, attribute_instance))
 
     for feed_data in data:
         if feed_data["key"] not in existing_feeds[sensor_address]:
@@ -161,7 +156,7 @@ def convert_to_feed_data(values, attribute_name, attribute_instance):
         sequence_numbers[sensor_address] = measurement.sequence_number
 
     duration = time.monotonic() - start_time
-    print("Done logging measurement to IO. Took {} seconds".format(duration))
+    print(f"Done logging measurement to IO. Took {duration} seconds")
     print()
 
 print("scan done")
diff --git a/examples/ble_broadcastnet_bridge.py b/examples/ble_broadcastnet_bridge.py
index 3d66f76..d33422d 100644
--- a/examples/ble_broadcastnet_bridge.py
+++ b/examples/ble_broadcastnet_bridge.py
@@ -2,15 +2,18 @@
 # SPDX-License-Identifier: MIT
 
 """This example bridges from BLE to Adafruit IO on a CircuitPython device that
-   supports both WiFi and BLE. (The first chip is the ESP32-S3.)"""
-from os import getenv
+supports both WiFi and BLE. (The first chip is the ESP32-S3.)"""
+
 import time
+from os import getenv
+
+import adafruit_ble
 import adafruit_connection_manager
 import adafruit_requests as requests
-from adafruit_ble.advertising.standard import ManufacturerDataField
-import adafruit_ble
 import board
 import wifi
+from adafruit_ble.advertising.standard import ManufacturerDataField
+
 import adafruit_ble_broadcastnet
 
 # To get a status neopixel flashing, install the neopixel library as well.
@@ -57,10 +60,6 @@ def aio_get(path, **kwargs):
     return requests.get(aio_base_url + path, **kwargs)
 
 
-# Disable outer names check because we frequently collide.
-# pylint: disable=redefined-outer-name
-
-
 def create_group(name):
     response = aio_post("/groups", json={"name": name})
     if response.status_code != 201:
@@ -72,9 +71,7 @@ def create_group(name):
 
 
 def create_feed(group_key, name):
-    response = aio_post(
-        "/groups/{}/feeds".format(group_key), json={"feed": {"name": name}}
-    )
+    response = aio_post(f"/groups/{group_key}/feeds", json={"feed": {"name": name}})
     if response.status_code != 201:
         print(name)
         print(response.content)
@@ -84,7 +81,7 @@ def create_feed(group_key, name):
 
 
 def create_data(group_key, data):
-    response = aio_post("/groups/{}/data".format(group_key), json={"feeds": data})
+    response = aio_post(f"/groups/{group_key}/data", json={"feeds": data})
     if response.status_code == 429:
         print("Throttled!")
         return False
@@ -162,9 +159,9 @@ def convert_to_feed_data(values, attribute_name, attribute_instance):
     # Derive the status color from the sensor address.
     if status_pixel:
         status_pixel[0] = rainbowio.colorwheel(sum(reversed_address))
-    group_key = "bridge-{}-sensor-{}".format(bridge_address, sensor_address)
+    group_key = f"bridge-{bridge_address}-sensor-{sensor_address}"
     if sensor_address not in existing_feeds:
-        create_group("Bridge {} Sensor {}".format(bridge_address, sensor_address))
+        create_group(f"Bridge {bridge_address} Sensor {sensor_address}")
         create_feed(group_key, "Missed Message Count")
         existing_feeds[sensor_address] = ["missed-message-count"]
 
@@ -175,9 +172,7 @@ def convert_to_feed_data(values, attribute_name, attribute_instance):
             if attribute != "sequence_number":
                 values = getattr(measurement, attribute)
                 if values is not None:
-                    data.extend(
-                        convert_to_feed_data(values, attribute, attribute_instance)
-                    )
+                    data.extend(convert_to_feed_data(values, attribute, attribute_instance))
 
     for feed_data in data:
         if feed_data["key"] not in existing_feeds[sensor_address]:
@@ -193,7 +188,7 @@ def convert_to_feed_data(values, attribute_name, attribute_instance):
     duration = time.monotonic() - start_time
     if status_pixel:
         status_pixel[0] = 0x000000
-    print("Done logging measurement to IO. Took {} seconds".format(duration))
+    print(f"Done logging measurement to IO. Took {duration} seconds")
     print()
 
 print("scan done")
diff --git a/examples/ble_broadcastnet_cpb.py b/examples/ble_broadcastnet_cpb.py
index d049054..4e5f7d8 100644
--- a/examples/ble_broadcastnet_cpb.py
+++ b/examples/ble_broadcastnet_cpb.py
@@ -4,7 +4,9 @@
 """This uses the CircuitPlayground Bluefruit as a sensor node."""
 
 import time
+
 from adafruit_circuitplayground import cp
+
 import adafruit_ble_broadcastnet
 
 print("This is BroadcastNet sensor:", adafruit_ble_broadcastnet.device_address)
diff --git a/examples/ble_broadcastnet_expo_backoff.py b/examples/ble_broadcastnet_expo_backoff.py
index 865a8d4..8f42480 100644
--- a/examples/ble_broadcastnet_expo_backoff.py
+++ b/examples/ble_broadcastnet_expo_backoff.py
@@ -2,15 +2,17 @@
 # SPDX-License-Identifier: MIT
 
 """This example uses the internal temperature sensor and reports the battery voltage. However, it
-   reads the temperature more often but only reports it when it's changed by a degree since the last
-   report. When doing a report it will actually do multiple broadcasts and wait 2 ** n readings
-   until the next broadcast. The delay is reset every time the temp moves more than 1 degree."""
+reads the temperature more often but only reports it when it's changed by a degree since the last
+report. When doing a report it will actually do multiple broadcasts and wait 2 ** n readings
+until the next broadcast. The delay is reset every time the temp moves more than 1 degree."""
 
 import math
 import time
+
 import analogio
 import board
 import microcontroller
+
 import adafruit_ble_broadcastnet
 
 print("This is BroadcastNet sensor:", adafruit_ble_broadcastnet.device_address)
@@ -21,7 +23,7 @@
 last_temperature = None
 consecutive = 1
 while True:
-    temp = microcontroller.cpu.temperature  # pylint: disable=no-member
+    temp = microcontroller.cpu.temperature
     if not last_temperature or abs(temp - last_temperature) > 1:
         consecutive = 1
         last_temperature = temp
@@ -33,12 +35,7 @@
     exp = int(math.log(consecutive, 2))
     if 2**exp == consecutive:
         measurement = adafruit_ble_broadcastnet.AdafruitSensorMeasurement()
-        battery_voltage = (
-            battery.value
-            / 2**16
-            * divider_ratio
-            * battery.reference_voltage  # pylint: disable=no-member
-        )
+        battery_voltage = battery.value / 2**16 * divider_ratio * battery.reference_voltage
         measurement.battery_voltage = int(battery_voltage * 1000)
         measurement.temperature = temp
         print(measurement)
diff --git a/examples/ble_broadcastnet_multisensor.py b/examples/ble_broadcastnet_multisensor.py
index 0f6b4bb..fc9f854 100644
--- a/examples/ble_broadcastnet_multisensor.py
+++ b/examples/ble_broadcastnet_multisensor.py
@@ -4,13 +4,15 @@
 """This is a complex sensor node that uses the sensors on a Clue and Feather Bluefruit Sense."""
 
 import time
-import board
+
 import adafruit_bmp280
-import adafruit_sht31d
 
 # import adafruit_apds9960.apds9960
 import adafruit_lis3mdl
 import adafruit_lsm6ds
+import adafruit_sht31d
+import board
+
 import adafruit_ble_broadcastnet
 
 print("This is BroadcastNet sensor:", adafruit_ble_broadcastnet.device_address)
diff --git a/examples/ble_broadcastnet_scan_test.py b/examples/ble_broadcastnet_scan_test.py
index 6d85275..40c9c2d 100644
--- a/examples/ble_broadcastnet_scan_test.py
+++ b/examples/ble_broadcastnet_scan_test.py
@@ -4,13 +4,12 @@
 """This example merely scans for broadcastnet packets to check that something is sending them."""
 
 import adafruit_ble
+
 import adafruit_ble_broadcastnet
 
 ble = adafruit_ble.BLERadio()
 
 print("scanning")
 # By providing Advertisement as well we include everything, not just specific advertisements.
-for advert in ble.start_scan(
-    adafruit_ble_broadcastnet.AdafruitSensorMeasurement, interval=0.5
-):
+for advert in ble.start_scan(adafruit_ble_broadcastnet.AdafruitSensorMeasurement, interval=0.5):
     print(advert)
diff --git a/examples/ble_broadcastnet_simpletest.py b/examples/ble_broadcastnet_simpletest.py
index a165881..13c98ed 100644
--- a/examples/ble_broadcastnet_simpletest.py
+++ b/examples/ble_broadcastnet_simpletest.py
@@ -2,19 +2,19 @@
 # SPDX-License-Identifier: MIT
 
 """This is a basic sensor node that uses the internal temperature sensor and reports it every 10
-   seconds."""
+seconds."""
 
 import time
+
 import microcontroller
+
 import adafruit_ble_broadcastnet
 
 print("This is BroadcastNet sensor:", adafruit_ble_broadcastnet.device_address)
 
 while True:
     measurement = adafruit_ble_broadcastnet.AdafruitSensorMeasurement()
-    measurement.temperature = (
-        microcontroller.cpu.temperature  # pylint: disable=no-member
-    )
+    measurement.temperature = microcontroller.cpu.temperature
     print(measurement)
     adafruit_ble_broadcastnet.broadcast(measurement)
     time.sleep(10)
diff --git a/ruff.toml b/ruff.toml
new file mode 100644
index 0000000..1b887b1
--- /dev/null
+++ b/ruff.toml
@@ -0,0 +1,107 @@
+# SPDX-FileCopyrightText: 2024 Tim Cocks for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
+target-version = "py38"
+line-length = 100
+
+[lint]
+preview = true
+select = ["I", "PL", "UP"]
+
+extend-select = [
+  "D419",  # empty-docstring
+  "E501",  # line-too-long
+  "W291",  # trailing-whitespace
+  "PLC0414",  # useless-import-alias
+  "PLC2401",  # non-ascii-name
+  "PLC2801",  # unnecessary-dunder-call
+  "PLC3002",  # unnecessary-direct-lambda-call
+  "E999",  # syntax-error
+  "PLE0101",  # return-in-init
+  "F706",  # return-outside-function
+  "F704",  # yield-outside-function
+  "PLE0116",  # continue-in-finally
+  "PLE0117",  # nonlocal-without-binding
+  "PLE0241",  # duplicate-bases
+  "PLE0302",  # unexpected-special-method-signature
+  "PLE0604",  # invalid-all-object
+  "PLE0605",  # invalid-all-format
+  "PLE0643",  # potential-index-error
+  "PLE0704",  # misplaced-bare-raise
+  "PLE1141",  # dict-iter-missing-items
+  "PLE1142",  # await-outside-async
+  "PLE1205",  # logging-too-many-args
+  "PLE1206",  # logging-too-few-args
+  "PLE1307",  # bad-string-format-type
+  "PLE1310",  # bad-str-strip-call
+  "PLE1507",  # invalid-envvar-value
+  "PLE2502",  # bidirectional-unicode
+  "PLE2510",  # invalid-character-backspace
+  "PLE2512",  # invalid-character-sub
+  "PLE2513",  # invalid-character-esc
+  "PLE2514",  # invalid-character-nul
+  "PLE2515",  # invalid-character-zero-width-space
+  "PLR0124",  # comparison-with-itself
+  "PLR0202",  # no-classmethod-decorator
+  "PLR0203",  # no-staticmethod-decorator
+  "UP004",  # useless-object-inheritance
+  "PLR0206",  # property-with-parameters
+  "PLR0904",  # too-many-public-methods
+  "PLR0911",  # too-many-return-statements
+  "PLR0912",  # too-many-branches
+  "PLR0913",  # too-many-arguments
+  "PLR0914",  # too-many-locals
+  "PLR0915",  # too-many-statements
+  "PLR0916",  # too-many-boolean-expressions
+  "PLR1702",  # too-many-nested-blocks
+  "PLR1704",  # redefined-argument-from-local
+  "PLR1711",  # useless-return
+  "C416",  # unnecessary-comprehension
+  "PLR1733",  # unnecessary-dict-index-lookup
+  "PLR1736",  # unnecessary-list-index-lookup
+
+  # ruff reports this rule is unstable
+  #"PLR6301",  # no-self-use
+
+  "PLW0108",  # unnecessary-lambda
+  "PLW0120",  # useless-else-on-loop
+  "PLW0127",  # self-assigning-variable
+  "PLW0129",  # assert-on-string-literal
+  "B033",  # duplicate-value
+  "PLW0131",  # named-expr-without-context
+  "PLW0245",  # super-without-brackets
+  "PLW0406",  # import-self
+  "PLW0602",  # global-variable-not-assigned
+  "PLW0603",  # global-statement
+  "PLW0604",  # global-at-module-level
+
+  # fails on the try: import typing used by libraries
+  #"F401",  # unused-import
+
+  "F841",  # unused-variable
+  "E722",  # bare-except
+  "PLW0711",  # binary-op-exception
+  "PLW1501",  # bad-open-mode
+  "PLW1508",  # invalid-envvar-default
+  "PLW1509",  # subprocess-popen-preexec-fn
+  "PLW2101",  # useless-with-lock
+  "PLW3301",  # nested-min-max
+]
+
+ignore = [
+    "PLR2004", # magic-value-comparison
+    "UP030", # format literals
+    "PLW1514",  # unspecified-encoding
+    "PLR0913", # too-many-arguments
+    "PLR0915", # too-many-statements
+    "PLR0917", # too-many-positional-arguments
+    "PLR0904", # too-many-public-methods
+    "PLR0912", # too-many-branches
+    "PLR0916", # too-many-boolean-expressions
+    "PLR6301", # could-be-static no-self-use
+    "PLC0415", # import outside toplevel
+]
+
+[format]
+line-ending = "lf"

From 7e061a1d201ef6cecefdae9a57c5a46169cf18e8 Mon Sep 17 00:00:00 2001
From: foamyguy <foamyguy@gmail.com>
Date: Wed, 4 Jun 2025 10:00:20 -0500
Subject: [PATCH 19/19] update rtd.yml file

Signed-off-by: foamyguy <foamyguy@gmail.com>
---
 .readthedocs.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/.readthedocs.yaml b/.readthedocs.yaml
index 88bca9f..255dafd 100644
--- a/.readthedocs.yaml
+++ b/.readthedocs.yaml
@@ -12,7 +12,7 @@ sphinx:
   configuration: docs/conf.py
 
 build:
-  os: ubuntu-20.04
+  os: ubuntu-lts-latest
   tools:
     python: "3"