diff --git a/source/_addons/tellstick.markdown b/source/_addons/tellstick.markdown
new file mode 100644
index 000000000000..33b301440fe3
--- /dev/null
+++ b/source/_addons/tellstick.markdown
@@ -0,0 +1,80 @@
+---
+layout: page
+title: "TellStick"
+description: "Telldus TellStick service enabler and tools."
+date: 2017-11-30 21:43
+sidebar: true
+comments: false
+sharing: true
+footer: true
+featured: false
+---
+
+Setting up the [Tellstick](http://telldus.com) service and tools contained in the [telldus-core](http://developer.telldus.com/) package and adding configuration to enable Tellstick and Tellstick Duo to work on your Hass.io.
+
+
+To use this add-on, you first install it from the list of Built-in add-ons in Hass.io.
+After installation you are presented with a default and example configuration, to alter this you must follow both the JSON format and also be aligned with the [valid parameters for Tellstick configuration file (tellstick.conf)](https://developer.telldus.com/wiki/TellStick_conf).
+
+After any changes has been made to the configuration you need to restart the add-on for the changes to take effect.
+
+
+Configuration variables:
+
+- **id** (*Required*): This is a number and must be unique for each device. 
+- **name** (*Required*): A name for easy identification of the device. 
+- **protocol** (*Required*): This is the protocol the device uses. More on the different protocols later down. 
+- **model** (*Optional*): The parameter model is only used by some protocols where there exists different types of devices using the same protocol. This can be dimmers versus non-dimmers, codeswitch versus selflearning etc.
+- **house** (*Optional*): Depending on protocol the values here can vary a lot to identify or group per house or type.
+- **unit** (*Optional*): Unit identifier, in most cases a value between 1 to 16 and often used in combination with house.
+- **fade** (*Optional*): Fade is either `true` or `false` and tells a dimmer if is should fade smooth or instand between values (only for IKEA protocol as it seems).
+- **code** (*Optional*): A number series based on ones and zeroes often used for dip-switch based devices.
+
+
+
+
+In order to communicate with the add-on you will also need to add Hass.io specific data in the `configuration.yaml` file.
+For regular Home Assistant you only add `tellstick:` but for Hass.io and this add-on you need to add internal communication details.
+
+
+```yaml
+# Example configuration.yaml entry
+
+tellstick:
+    host: core-tellstick
+    port: [50800, 50801]
+    
+```
+
+
+
+To add [lights](https://home-assistant.io/components/light.tellstick/), [sensors](https://home-assistant.io/components/sensor.tellstick/) and [switches](https://home-assistant.io/components/switch.tellstick/) you follow the guidelines for each type individually that is [described for Home Assistant](https://home-assistant.io/components/tellstick/)
+
+
+## {% linkable_title Examples %}
+
+
+Example for adding more devices in the add-on configuration (note the comma separator between devices):
+
+```json
+{
+  "devices": [
+    {
+      "id": 1,
+      "name": "Outdoor light",
+      "protocol": "everflourish",
+      "model": "selflearning-switch",
+      "house": "A",
+      "unit": "1"
+    },
+    {
+      "id": 2,
+      "name": "Hallway dimmer",
+      "protocol": "risingsun",
+      "model": "selflearning-dimmer",
+      "house": "A",
+      "unit": "2"
+    }
+  ]
+}
+```