"""

Adjust subplot layouts so that there are no overlapping axes or axes

decorations. All axes decorations are dealt with (labels, ticks, titles,

ticklabels) and some dependent artists are also dealt with (colorbar,

suptitle).

Layout is done via `~matplotlib.gridspec`, with one constraint per gridspec,

so it is possible to have overlapping axes if the gridspecs overlap (i.e.

using `~matplotlib.gridspec.GridSpecFromSubplotSpec`). Axes placed using

``figure.subplots()`` or ``figure.add_subplots()`` will participate in the

layout. Axes manually placed via ``figure.add_axes()`` will not.

See Tutorial: :doc:`/tutorials/intermediate/constrainedlayout_guide`

"""

import logging

import numpy as np

from matplotlib import _api

import matplotlib.transforms as mtransforms

import matplotlib._layoutgrid as mlayoutgrid

_log = logging.getLogger(__name__)

"""

General idea:

-------------

First, a figure has a gridspec that divides the figure into nrows and ncols,

with heights and widths set by ``height_ratios`` and ``width_ratios``,

often just set to 1 for an equal grid.

Subplotspecs that are derived from this gridspec can contain either a

``SubPanel``, a ``GridSpecFromSubplotSpec``, or an axes. The ``SubPanel`` and

``GridSpecFromSubplotSpec`` are dealt with recursively and each contain an

analogous layout.

Each ``GridSpec`` has a ``_layoutgrid`` attached to it. The ``_layoutgrid``

has the same logical layout as the ``GridSpec``. Each row of the grid spec

has a top and bottom "margin" and each column has a left and right "margin".

The "inner" height of each row is constrained to be the same (or as modified

by ``height_ratio``), and the "inner" width of each column is

constrained to be the same (as modified by ``width_ratio``), where "inner"

is the width or height of each column/row minus the size of the margins.

Then the size of the margins for each row and column are determined as the

max width of the decorators on each axes that has decorators in that margin.

For instance, a normal axes would have a left margin that includes the

left ticklabels, and the ylabel if it exists. The right margin may include a

colorbar, the bottom margin the xaxis decorations, and the top margin the

title.

With these constraints, the solver then finds appropriate bounds for the

columns and rows. It's possible that the margins take up the whole figure,

in which case the algorithm is not applied and a warning is raised.

See the tutorial doc:`/tutorials/intermediate/constrainedlayout_guide`

for more discussion of the algorithm with examples.

"""

######################################################

def do_constrained_layout(fig, renderer, h_pad, w_pad,

hspace=None, wspace=None):

"""

Do the constrained_layout. Called at draw time in

``figure.constrained_layout()``

Parameters

----------

fig : Figure

``Figure`` instance to do the layout in.

renderer : Renderer

Renderer to use.

h_pad, w_pad : float

Padding around the axes elements in figure-normalized units.

hspace, wspace : float

Fraction of the figure to dedicate to space between the

axes. These are evenly spread between the gaps between the axes.

A value of 0.2 for a three-column layout would have a space

of 0.1 of the figure width between each column.

If h/wspace < h/w_pad, then the pads are used instead.

Returns

-------

layoutgrid : private debugging structure

"""

# make layoutgrid tree...

layoutgrids = make_layoutgrids(fig, None)

if not layoutgrids['hasgrids']:

_api.warn_external('There are no gridspecs with layoutgrids. '

'Possibly did not call parent GridSpec with the'

' "figure" keyword')

return

for _ in range(2):

# do the algorithm twice. This has to be done because decorations

# change size after the first re-position (i.e. x/yticklabels get

# larger/smaller). This second reposition tends to be much milder,

# so doing twice makes things work OK.

# make margins for all the axes and subfigures in the

# figure. Add margins for colorbars...

make_layout_margins(layoutgrids, fig, renderer, h_pad=h_pad,

w_pad=w_pad, hspace=hspace, wspace=wspace)

make_margin_suptitles(layoutgrids, fig, renderer, h_pad=h_pad,

w_pad=w_pad)

# if a layout is such that a columns (or rows) margin has no

# constraints, we need to make all such instances in the grid

# match in margin size.

match_submerged_margins(layoutgrids, fig)

# update all the variables in the layout.

layoutgrids[fig].update_variables()

if check_no_collapsed_axes(layoutgrids, fig):

reposition_axes(layoutgrids, fig, renderer, h_pad=h_pad,

w_pad=w_pad, hspace=hspace, wspace=wspace)

else:

_api.warn_external('constrained_layout not applied because '

'axes sizes collapsed to zero. Try making '

'figure larger or axes decorations smaller.')

reset_margins(layoutgrids, fig)

return layoutgrids

def make_layoutgrids(fig, layoutgrids):

"""

Make the layoutgrid tree.

(Sub)Figures get a layoutgrid so we can have figure margins.

Gridspecs that are attached to axes get a layoutgrid so axes

can have margins.

"""

if layoutgrids is None:

layoutgrids = dict()

layoutgrids['hasgrids'] = False

if not hasattr(fig, '_parent'):

# top figure

layoutgrids[fig] = mlayoutgrid.LayoutGrid(parent=None, name='figlb')

else:

# subfigure

gs = fig._subplotspec.get_gridspec()

# it is possible the gridspec containing this subfigure hasn't

# been added to the tree yet:

layoutgrids = make_layoutgrids_gs(layoutgrids, gs)

# add the layoutgrid for the subfigure:

parentlb = layoutgrids[gs]

layoutgrids[fig] = mlayoutgrid.LayoutGrid(

parent=parentlb,

name='panellb',

parent_inner=True,

nrows=1, ncols=1,

parent_pos=(fig._subplotspec.rowspan,

fig._subplotspec.colspan))

# recursively do all subfigures in this figure...

for sfig in fig.subfigs:

layoutgrids = make_layoutgrids(sfig, layoutgrids)

# for each axes at the local level add its gridspec:

for ax in fig._localaxes.as_list():

if hasattr(ax, 'get_subplotspec'):

gs = ax.get_subplotspec().get_gridspec()

layoutgrids = make_layoutgrids_gs(layoutgrids, gs)

return layoutgrids

def make_layoutgrids_gs(layoutgrids, gs):

"""

Make the layoutgrid for a gridspec (and anything nested in the gridspec)

"""

if gs in layoutgrids or gs.figure is None:

return layoutgrids

# in order to do constrained_layout there has to be at least *one*

# gridspec in the tree:

layoutgrids['hasgrids'] = True

if not hasattr(gs, '_subplot_spec'):

# normal gridspec

parent = layoutgrids[gs.figure]

layoutgrids[gs] = mlayoutgrid.LayoutGrid(

parent=parent,

parent_inner=True,

name='gridspec',

ncols=gs._ncols, nrows=gs._nrows,

width_ratios=gs.get_width_ratios(),

height_ratios=gs.get_height_ratios())

else:

# this is a gridspecfromsubplotspec:

subplot_spec = gs._subplot_spec

parentgs = subplot_spec.get_gridspec()

# if a nested gridspec it is possible the parent is not in there yet:

if parentgs not in layoutgrids:

layoutgrids = make_layoutgrids_gs(layoutgrids, parentgs)

subspeclb = layoutgrids[parentgs]

# gridspecfromsubplotspec need an outer container:

# get a unique representation:

rep = (gs, 'top')

if rep not in layoutgrids:

layoutgrids[rep] = mlayoutgrid.LayoutGrid(

parent=subspeclb,

name='top',

nrows=1, ncols=1,

parent_pos=(subplot_spec.rowspan, subplot_spec.colspan))

layoutgrids[gs] = mlayoutgrid.LayoutGrid(

parent=layoutgrids[rep],

name='gridspec',

nrows=gs._nrows, ncols=gs._ncols,

width_ratios=gs.get_width_ratios(),

height_ratios=gs.get_height_ratios())

return layoutgrids

def check_no_collapsed_axes(layoutgrids, fig):

"""

Check that no axes have collapsed to zero size.

"""

for sfig in fig.subfigs:

ok = check_no_collapsed_axes(layoutgrids, sfig)

if not ok:

return False

for ax in fig.axes:

if hasattr(ax, 'get_subplotspec'):

gs = ax.get_subplotspec().get_gridspec()

if gs in layoutgrids:

lg = layoutgrids[gs]

for i in range(gs.nrows):

for j in range(gs.ncols):

bb = lg.get_inner_bbox(i, j)

if bb.width <= 0 or bb.height <= 0:

return False

return True

def get_margin_from_padding(obj, *, w_pad=0, h_pad=0,

hspace=0, wspace=0):

ss = obj._subplotspec

gs = ss.get_gridspec()

if hasattr(gs, 'hspace'):

_hspace = (gs.hspace if gs.hspace is not None else hspace)

_wspace = (gs.wspace if gs.wspace is not None else wspace)

else:

_hspace = (gs._hspace if gs._hspace is not None else hspace)

_wspace = (gs._wspace if gs._wspace is not None else wspace)

_wspace = _wspace / 2

_hspace = _hspace / 2

nrows, ncols = gs.get_geometry()

# there are two margins for each direction. The "cb"

# margins are for pads and colorbars, the non-"cb" are

# for the axes decorations (labels etc).

margin = {'leftcb': w_pad, 'rightcb': w_pad,

'bottomcb': h_pad, 'topcb': h_pad,

'left': 0, 'right': 0,

'top': 0, 'bottom': 0}

if _wspace / ncols > w_pad:

if ss.colspan.start > 0:

margin['leftcb'] = _wspace / ncols

if ss.colspan.stop < ncols:

margin['rightcb'] = _wspace / ncols

if _hspace / nrows > h_pad:

if ss.rowspan.stop < nrows:

margin['bottomcb'] = _hspace / nrows

if ss.rowspan.start > 0:

margin['topcb'] = _hspace / nrows

return margin

def make_layout_margins(layoutgrids, fig, renderer, *, w_pad=0, h_pad=0,

hspace=0, wspace=0):

"""

For each axes, make a margin between the *pos* layoutbox and the

*axes* layoutbox be a minimum size that can accommodate the

decorations on the axis.

Then make room for colorbars.

"""

for sfig in fig.subfigs: # recursively make child panel margins

ss = sfig._subplotspec

make_layout_margins(layoutgrids, sfig, renderer,

w_pad=w_pad, h_pad=h_pad,

hspace=hspace, wspace=wspace)

margins = get_margin_from_padding(sfig, w_pad=0, h_pad=0,

hspace=hspace, wspace=wspace)

layoutgrids[sfig].parent.edit_outer_margin_mins(margins, ss)

for ax in fig._localaxes.as_list():

if not hasattr(ax, 'get_subplotspec') or not ax.get_in_layout():

continue

ss = ax.get_subplotspec()

gs = ss.get_gridspec()

if gs not in layoutgrids:

return

margin = get_margin_from_padding(ax, w_pad=w_pad, h_pad=h_pad,

hspace=hspace, wspace=wspace)

pos, bbox = get_pos_and_bbox(ax, renderer)

# the margin is the distance between the bounding box of the axes

# and its position (plus the padding from above)

margin['left'] += pos.x0 - bbox.x0

margin['right'] += bbox.x1 - pos.x1

# remember that rows are ordered from top:

margin['bottom'] += pos.y0 - bbox.y0

margin['top'] += bbox.y1 - pos.y1

# make margin for colorbars. These margins go in the

# padding margin, versus the margin for axes decorators.

for cbax in ax._colorbars:

# note pad is a fraction of the parent width...

pad = colorbar_get_pad(layoutgrids, cbax)

# colorbars can be child of more than one subplot spec:

cbp_rspan, cbp_cspan = get_cb_parent_spans(cbax)

loc = cbax._colorbar_info['location']

cbpos, cbbbox = get_pos_and_bbox(cbax, renderer)

if loc == 'right':

if cbp_cspan.stop == ss.colspan.stop:

# only increase if the colorbar is on the right edge

margin['rightcb'] += cbbbox.width + pad

elif loc == 'left':

if cbp_cspan.start == ss.colspan.start:

# only increase if the colorbar is on the left edge

margin['leftcb'] += cbbbox.width + pad

elif loc == 'top':

if cbp_rspan.start == ss.rowspan.start:

margin['topcb'] += cbbbox.height + pad

else:

if cbp_rspan.stop == ss.rowspan.stop:

margin['bottomcb'] += cbbbox.height + pad

# If the colorbars are wider than the parent box in the

# cross direction

if loc in ['top', 'bottom']:

if (cbp_cspan.start == ss.colspan.start and

cbbbox.x0 < bbox.x0):

margin['left'] += bbox.x0 - cbbbox.x0

if (cbp_cspan.stop == ss.colspan.stop and

cbbbox.x1 > bbox.x1):

margin['right'] += cbbbox.x1 - bbox.x1

# or taller:

if loc in ['left', 'right']:

if (cbp_rspan.stop == ss.rowspan.stop and

cbbbox.y0 < bbox.y0):

margin['bottom'] += bbox.y0 - cbbbox.y0

if (cbp_rspan.start == ss.rowspan.start and

cbbbox.y1 > bbox.y1):

margin['top'] += cbbbox.y1 - bbox.y1

# pass the new margins down to the layout grid for the solution...

layoutgrids[gs].edit_outer_margin_mins(margin, ss)

def make_margin_suptitles(layoutgrids, fig, renderer, *, w_pad=0, h_pad=0):

# Figure out how large the suptitle is and make the

# top level figure margin larger.

inv_trans_fig = fig.transFigure.inverted().transform_bbox

# get the h_pad and w_pad as distances in the local subfigure coordinates:

padbox = mtransforms.Bbox([[0, 0], [w_pad, h_pad]])

padbox = (fig.transFigure -

fig.transSubfigure).transform_bbox(padbox)

h_pad_local = padbox.height

w_pad_local = padbox.width

for sfig in fig.subfigs:

make_margin_suptitles(layoutgrids, sfig, renderer,

w_pad=w_pad, h_pad=h_pad)

if fig._suptitle is not None and fig._suptitle.get_in_layout():

p = fig._suptitle.get_position()

if getattr(fig._suptitle, '_autopos', False):

fig._suptitle.set_position((p[0], 1 - h_pad_local))

bbox = inv_trans_fig(fig._suptitle.get_tightbbox(renderer))

layoutgrids[fig].edit_margin_min('top', bbox.height + 2 * h_pad)

if fig._supxlabel is not None and fig._supxlabel.get_in_layout():

p = fig._supxlabel.get_position()

if getattr(fig._supxlabel, '_autopos', False):

fig._supxlabel.set_position((p[0], h_pad_local))

bbox = inv_trans_fig(fig._supxlabel.get_tightbbox(renderer))

layoutgrids[fig].edit_margin_min('bottom',

bbox.height + 2 * h_pad)

if fig._supylabel is not None and fig._supylabel.get_in_layout():

p = fig._supylabel.get_position()

if getattr(fig._supylabel, '_autopos', False):

fig._supylabel.set_position((w_pad_local, p[1]))

bbox = inv_trans_fig(fig._supylabel.get_tightbbox(renderer))

layoutgrids[fig].edit_margin_min('left', bbox.width + 2 * w_pad)

def match_submerged_margins(layoutgrids, fig):

"""

Make the margins that are submerged inside an Axes the same size.

This allows axes that span two columns (or rows) that are offset

from one another to have the same size.

This gives the proper layout for something like::

fig = plt.figure(constrained_layout=True)

axs = fig.subplot_mosaic("AAAB\nCCDD")

Without this routine, the axes D will be wider than C, because the

margin width between the two columns in C has no width by default,

whereas the margins between the two columns of D are set by the

width of the margin between A and B. However, obviously the user would

like C and D to be the same size, so we need to add constraints to these

"submerged" margins.

This routine makes all the interior margins the same, and the spacing

between the three columns in A and the two column in C are all set to the

margins between the two columns of D.

See test_constrained_layout::test_constrained_layout12 for an example.

"""

for sfig in fig.subfigs:

match_submerged_margins(layoutgrids, sfig)

axs = [a for a in fig.get_axes() if (hasattr(a, 'get_subplotspec')

and a.get_in_layout())]

for ax1 in axs:

ss1 = ax1.get_subplotspec()

if ss1.get_gridspec() not in layoutgrids:

axs.remove(ax1)

continue

lg1 = layoutgrids[ss1.get_gridspec()]

# interior columns:

if len(ss1.colspan) > 1:

maxsubl = np.max(

lg1.margin_vals['left'][ss1.colspan[1:]] +

lg1.margin_vals['leftcb'][ss1.colspan[1:]]

)

maxsubr = np.max(

lg1.margin_vals['right'][ss1.colspan[:-1]] +

lg1.margin_vals['rightcb'][ss1.colspan[:-1]]

)

for ax2 in axs:

ss2 = ax2.get_subplotspec()

lg2 = layoutgrids[ss2.get_gridspec()]

if lg2 is not None and len(ss2.colspan) > 1:

maxsubl2 = np.max(

lg2.margin_vals['left'][ss2.colspan[1:]] +

lg2.margin_vals['leftcb'][ss2.colspan[1:]])

if maxsubl2 > maxsubl:

maxsubl = maxsubl2

maxsubr2 = np.max(

lg2.margin_vals['right'][ss2.colspan[:-1]] +

lg2.margin_vals['rightcb'][ss2.colspan[:-1]])

if maxsubr2 > maxsubr:

maxsubr = maxsubr2

for i in ss1.colspan[1:]:

lg1.edit_margin_min('left', maxsubl, cell=i)

for i in ss1.colspan[:-1]:

lg1.edit_margin_min('right', maxsubr, cell=i)

# interior rows:

if len(ss1.rowspan) > 1:

maxsubt = np.max(

lg1.margin_vals['top'][ss1.rowspan[1:]] +

lg1.margin_vals['topcb'][ss1.rowspan[1:]]

)

maxsubb = np.max(

lg1.margin_vals['bottom'][ss1.rowspan[:-1]] +

lg1.margin_vals['bottomcb'][ss1.rowspan[:-1]]

)

for ax2 in axs:

ss2 = ax2.get_subplotspec()

lg2 = layoutgrids[ss2.get_gridspec()]

if lg2 is not None:

if len(ss2.rowspan) > 1:

maxsubt = np.max([np.max(

lg2.margin_vals['top'][ss2.rowspan[1:]] +

lg2.margin_vals['topcb'][ss2.rowspan[1:]]

), maxsubt])

maxsubb = np.max([np.max(

lg2.margin_vals['bottom'][ss2.rowspan[:-1]] +

lg2.margin_vals['bottomcb'][ss2.rowspan[:-1]]

), maxsubb])

for i in ss1.rowspan[1:]:

lg1.edit_margin_min('top', maxsubt, cell=i)

for i in ss1.rowspan[:-1]:

lg1.edit_margin_min('bottom', maxsubb, cell=i)

def get_cb_parent_spans(cbax):

"""

Figure out which subplotspecs this colorbar belongs to:

"""

rowstart = np.inf

rowstop = -np.inf

colstart = np.inf

colstop = -np.inf

for parent in cbax._colorbar_info['parents']:

ss = parent.get_subplotspec()

rowstart = min(ss.rowspan.start, rowstart)

rowstop = max(ss.rowspan.stop, rowstop)

colstart = min(ss.colspan.start, colstart)

colstop = max(ss.colspan.stop, colstop)

rowspan = range(rowstart, rowstop)

colspan = range(colstart, colstop)

return rowspan, colspan

def get_pos_and_bbox(ax, renderer):

"""

Get the position and the bbox for the axes.

Parameters

----------

ax

renderer

Returns

-------

pos : Bbox

Position in figure coordinates.

bbox : Bbox

Tight bounding box in figure coordinates.

"""

fig = ax.figure

pos = ax.get_position(original=True)

# pos is in panel co-ords, but we need in figure for the layout

pos = pos.transformed(fig.transSubfigure - fig.transFigure)

try:

tightbbox = ax.get_tightbbox(renderer=renderer, for_layout_only=True)

except TypeError:

tightbbox = ax.get_tightbbox(renderer=renderer)

if tightbbox is None:

bbox = pos

else:

bbox = tightbbox.transformed(fig.transFigure.inverted())

return pos, bbox

def reposition_axes(layoutgrids, fig, renderer, *,

w_pad=0, h_pad=0, hspace=0, wspace=0):

"""

Reposition all the axes based on the new inner bounding box.

"""

trans_fig_to_subfig = fig.transFigure - fig.transSubfigure

for sfig in fig.subfigs:

bbox = layoutgrids[sfig].get_outer_bbox()

sfig._redo_transform_rel_fig(

bbox=bbox.transformed(trans_fig_to_subfig))

reposition_axes(layoutgrids, sfig, renderer,

w_pad=w_pad, h_pad=h_pad,

wspace=wspace, hspace=hspace)

for ax in fig._localaxes.as_list():

if not hasattr(ax, 'get_subplotspec') or not ax.get_in_layout():

continue

# grid bbox is in Figure coordinates, but we specify in panel

# coordinates...

ss = ax.get_subplotspec()

gs = ss.get_gridspec()

nrows, ncols = gs.get_geometry()

if gs not in layoutgrids:

return

bbox = layoutgrids[gs].get_inner_bbox(rows=ss.rowspan,

cols=ss.colspan)

# transform from figure to panel for set_position:

newbbox = trans_fig_to_subfig.transform_bbox(bbox)

ax._set_position(newbbox)

# move the colorbars:

# we need to keep track of oldw and oldh if there is more than

# one colorbar:

offset = {'left': 0, 'right': 0, 'bottom': 0, 'top': 0}

for nn, cbax in enumerate(ax._colorbars[::-1]):

if ax == cbax._colorbar_info['parents'][0]:

reposition_colorbar(layoutgrids, cbax, renderer,

offset=offset)

def reposition_colorbar(layoutgrids, cbax, renderer, *, offset=None):

"""

Place the colorbar in its new place.

Parameters

----------

cbax : Axes

Axes for the colorbar

renderer :

w_pad, h_pad : float

width and height padding (in fraction of figure)

hspace, wspace : float

width and height padding as fraction of figure size divided by

number of columns or rows

margin : array-like

offset the colorbar needs to be pushed to in order to

account for multiple colorbars

"""

parents = cbax._colorbar_info['parents']

gs = parents[0].get_gridspec()

fig = cbax.figure

trans_fig_to_subfig = fig.transFigure - fig.transSubfigure

cb_rspans, cb_cspans = get_cb_parent_spans(cbax)

bboxparent = layoutgrids[gs].get_bbox_for_cb(rows=cb_rspans,

cols=cb_cspans)

pb = layoutgrids[gs].get_inner_bbox(rows=cb_rspans, cols=cb_cspans)

location = cbax._colorbar_info['location']

anchor = cbax._colorbar_info['anchor']

fraction = cbax._colorbar_info['fraction']

aspect = cbax._colorbar_info['aspect']

shrink = cbax._colorbar_info['shrink']

cbpos, cbbbox = get_pos_and_bbox(cbax, renderer)

# Colorbar gets put at extreme edge of outer bbox of the subplotspec

# It needs to be moved in by: 1) a pad 2) its "margin" 3) by

# any colorbars already added at this location:

cbpad = colorbar_get_pad(layoutgrids, cbax)

if location in ('left', 'right'):

# fraction and shrink are fractions of parent

pbcb = pb.shrunk(fraction, shrink).anchored(anchor, pb)

# The colorbar is at the left side of the parent. Need

# to translate to right (or left)

if location == 'right':

lmargin = cbpos.x0 - cbbbox.x0

dx = bboxparent.x1 - pbcb.x0 + offset['right']

dx += cbpad + lmargin

offset['right'] += cbbbox.width + cbpad

pbcb = pbcb.translated(dx, 0)

else:

lmargin = cbpos.x0 - cbbbox.x0

dx = bboxparent.x0 - pbcb.x0 # edge of parent

dx += -cbbbox.width - cbpad + lmargin - offset['left']

offset['left'] += cbbbox.width + cbpad

pbcb = pbcb.translated(dx, 0)

else: # horizontal axes:

pbcb = pb.shrunk(shrink, fraction).anchored(anchor, pb)

if location == 'top':

bmargin = cbpos.y0 - cbbbox.y0

dy = bboxparent.y1 - pbcb.y0 + offset['top']

dy += cbpad + bmargin

offset['top'] += cbbbox.height + cbpad

pbcb = pbcb.translated(0, dy)

else:

bmargin = cbpos.y0 - cbbbox.y0

dy = bboxparent.y0 - pbcb.y0

dy += -cbbbox.height - cbpad + bmargin - offset['bottom']

offset['bottom'] += cbbbox.height + cbpad

pbcb = pbcb.translated(0, dy)

pbcb = trans_fig_to_subfig.transform_bbox(pbcb)

cbax.set_transform(fig.transSubfigure)

cbax._set_position(pbcb)

cbax.set_anchor(anchor)

if location in ['bottom', 'top']:

aspect = 1 / aspect

cbax.set_box_aspect(aspect)

cbax.set_aspect('auto')

return offset

def reset_margins(layoutgrids, fig):

"""

Reset the margins in the layoutboxes of fig.

Margins are usually set as a minimum, so if the figure gets smaller

the minimum needs to be zero in order for it to grow again.

"""

for sfig in fig.subfigs:

reset_margins(layoutgrids, sfig)

for ax in fig.axes:

if hasattr(ax, 'get_subplotspec') and ax.get_in_layout():

ss = ax.get_subplotspec()

gs = ss.get_gridspec()

if gs in layoutgrids:

layoutgrids[gs].reset_margins()

layoutgrids[fig].reset_margins()

def colorbar_get_pad(layoutgrids, cax):

parents = cax._colorbar_info['parents']

gs = parents[0].get_gridspec()

cb_rspans, cb_cspans = get_cb_parent_spans(cax)

bboxouter = layoutgrids[gs].get_inner_bbox(rows=cb_rspans, cols=cb_cspans)

if cax._colorbar_info['location'] in ['right', 'left']:

size = bboxouter.width

else:

size = bboxouter.height

return cax._colorbar_info['pad'] * size