From 6d5f6a0eba15c1d2cfd367f1c3fb77ab2bfe8ca8 Mon Sep 17 00:00:00 2001
From: Kim Phillips <kim.phillips@freescale.com>
Date: Thu, 22 Jan 2015 19:05:06 -0600
Subject: [PATCH 01/34] powerpc/fsl_pci: Fix pci stack build bug with
 FRAME_WARN

Fix this:

  CC      arch/powerpc/sysdev/fsl_pci.o
arch/powerpc/sysdev/fsl_pci.c: In function 'fsl_pcie_check_link':
arch/powerpc/sysdev/fsl_pci.c:91:1: error: the frame size of 1360 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

when configuring FRAME_WARN, by refactoring indirect_read_config()
to take hose and bus number instead of the 1344-byte struct pci_bus.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/include/asm/pci-bridge.h |  4 ++++
 arch/powerpc/sysdev/fsl_pci.c         | 11 ++++-------
 arch/powerpc/sysdev/indirect_pci.c    | 25 +++++++++++++++++--------
 3 files changed, 25 insertions(+), 15 deletions(-)

diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 725247beebecda..546d036fe925f4 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -119,6 +119,10 @@ extern void setup_indirect_pci(struct pci_controller* hose,
 extern int indirect_read_config(struct pci_bus *bus, unsigned int devfn,
 				int offset, int len, u32 *val);
 
+extern int __indirect_read_config(struct pci_controller *hose,
+				  unsigned char bus_number, unsigned int devfn,
+				  int offset, int len, u32 *val);
+
 extern int indirect_write_config(struct pci_bus *bus, unsigned int devfn,
 				 int offset, int len, u32 val);
 
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 6455c1eada1a16..7cc215e86d8297 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -68,13 +68,10 @@ static int fsl_pcie_check_link(struct pci_controller *hose)
 	u32 val = 0;
 
 	if (hose->indirect_type & PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK) {
-		if (hose->ops->read == fsl_indirect_read_config) {
-			struct pci_bus bus;
-			bus.number = hose->first_busno;
-			bus.sysdata = hose;
-			bus.ops = hose->ops;
-			indirect_read_config(&bus, 0, PCIE_LTSSM, 4, &val);
-		} else
+		if (hose->ops->read == fsl_indirect_read_config)
+			__indirect_read_config(hose, hose->first_busno, 0,
+					       PCIE_LTSSM, 4, &val);
+		else
 			early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val);
 		if (val < PCIE_LTSSM_L0)
 			return 1;
diff --git a/arch/powerpc/sysdev/indirect_pci.c b/arch/powerpc/sysdev/indirect_pci.c
index 1f6c570d66d45e..692de9dbc680d3 100644
--- a/arch/powerpc/sysdev/indirect_pci.c
+++ b/arch/powerpc/sysdev/indirect_pci.c
@@ -20,31 +20,31 @@
 #include <asm/pci-bridge.h>
 #include <asm/machdep.h>
 
-int indirect_read_config(struct pci_bus *bus, unsigned int devfn,
-			 int offset, int len, u32 *val)
+int __indirect_read_config(struct pci_controller *hose,
+			   unsigned char bus_number, unsigned int devfn,
+			   int offset, int len, u32 *val)
 {
-	struct pci_controller *hose = pci_bus_to_host(bus);
 	volatile void __iomem *cfg_data;
 	u8 cfg_type = 0;
 	u32 bus_no, reg;
 
 	if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK) {
-		if (bus->number != hose->first_busno)
+		if (bus_number != hose->first_busno)
 			return PCIBIOS_DEVICE_NOT_FOUND;
 		if (devfn != 0)
 			return PCIBIOS_DEVICE_NOT_FOUND;
 	}
 
 	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
+		if (ppc_md.pci_exclude_device(hose, bus_number, devfn))
 			return PCIBIOS_DEVICE_NOT_FOUND;
 
 	if (hose->indirect_type & PPC_INDIRECT_TYPE_SET_CFG_TYPE)
-		if (bus->number != hose->first_busno)
+		if (bus_number != hose->first_busno)
 			cfg_type = 1;
 
-	bus_no = (bus->number == hose->first_busno) ?
-			hose->self_busno : bus->number;
+	bus_no = (bus_number == hose->first_busno) ?
+			hose->self_busno : bus_number;
 
 	if (hose->indirect_type & PPC_INDIRECT_TYPE_EXT_REG)
 		reg = ((offset & 0xf00) << 16) | (offset & 0xfc);
@@ -77,6 +77,15 @@ int indirect_read_config(struct pci_bus *bus, unsigned int devfn,
 	return PCIBIOS_SUCCESSFUL;
 }
 
+int indirect_read_config(struct pci_bus *bus, unsigned int devfn,
+			 int offset, int len, u32 *val)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+
+	return __indirect_read_config(hose, bus->number, devfn, offset, len,
+				      val);
+}
+
 int indirect_write_config(struct pci_bus *bus, unsigned int devfn,
 			  int offset, int len, u32 val)
 {

From e8d2081bb4d7a3bb6d779ac3829b81aceabad065 Mon Sep 17 00:00:00 2001
From: Emil Medve <Emilian.Medve@freescale.com>
Date: Wed, 21 Jan 2015 16:31:50 -0600
Subject: [PATCH 02/34] powerpc/dts: Remove T4240 emulator support

Probably we should have not upstreamed this in the first place

Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/dts/t4240emu.dts | 281 -----------------------------
 1 file changed, 281 deletions(-)
 delete mode 100644 arch/powerpc/boot/dts/t4240emu.dts

diff --git a/arch/powerpc/boot/dts/t4240emu.dts b/arch/powerpc/boot/dts/t4240emu.dts
deleted file mode 100644
index decaf357db9c56..00000000000000
--- a/arch/powerpc/boot/dts/t4240emu.dts
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * T4240 emulator Device Tree Source
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/include/ "fsl/e6500_power_isa.dtsi"
-/ {
-	compatible = "fsl,T4240";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		ccsr = &soc;
-
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		dma0 = &dma0;
-		dma1 = &dma1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: PowerPC,e6500@0 {
-			device_type = "cpu";
-			reg = <0 1>;
-			next-level-cache = <&L2_1>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-		cpu1: PowerPC,e6500@2 {
-			device_type = "cpu";
-			reg = <2 3>;
-			next-level-cache = <&L2_1>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-		cpu2: PowerPC,e6500@4 {
-			device_type = "cpu";
-			reg = <4 5>;
-			next-level-cache = <&L2_1>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-		cpu3: PowerPC,e6500@6 {
-			device_type = "cpu";
-			reg = <6 7>;
-			next-level-cache = <&L2_1>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-
-		cpu4: PowerPC,e6500@8 {
-			device_type = "cpu";
-			reg = <8 9>;
-			next-level-cache = <&L2_2>;
-			fsl,portid-mapping = <0x40000000>;
-		};
-		cpu5: PowerPC,e6500@10 {
-			device_type = "cpu";
-			reg = <10 11>;
-			next-level-cache = <&L2_2>;
-			fsl,portid-mapping = <0x40000000>;
-		};
-		cpu6: PowerPC,e6500@12 {
-			device_type = "cpu";
-			reg = <12 13>;
-			next-level-cache = <&L2_2>;
-			fsl,portid-mapping = <0x40000000>;
-		};
-		cpu7: PowerPC,e6500@14 {
-			device_type = "cpu";
-			reg = <14 15>;
-			next-level-cache = <&L2_2>;
-			fsl,portid-mapping = <0x40000000>;
-		};
-
-		cpu8: PowerPC,e6500@16 {
-			device_type = "cpu";
-			reg = <16 17>;
-			next-level-cache = <&L2_3>;
-			fsl,portid-mapping = <0x20000000>;
-		};
-		cpu9: PowerPC,e6500@18 {
-			device_type = "cpu";
-			reg = <18 19>;
-			next-level-cache = <&L2_3>;
-			fsl,portid-mapping = <0x20000000>;
-		};
-		cpu10: PowerPC,e6500@20 {
-			device_type = "cpu";
-			reg = <20 21>;
-			next-level-cache = <&L2_3>;
-			fsl,portid-mapping = <0x20000000>;
-		};
-		cpu11: PowerPC,e6500@22 {
-			device_type = "cpu";
-			reg = <22 23>;
-			next-level-cache = <&L2_3>;
-			fsl,portid-mapping = <0x20000000>;
-		};
-	};
-};
-
-/ {
-	model = "fsl,T4240QDS";
-	compatible = "fsl,T4240EMU", "fsl,T4240QDS";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	ifc: localbus@ffe124000 {
-		reg = <0xf 0xfe124000 0 0x2000>;
-		ranges = <0 0 0xf 0xe8000000 0x08000000
-			  2 0 0xf 0xff800000 0x00010000
-			  3 0 0xf 0xffdf0000 0x00008000>;
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x8000000>;
-
-			bank-width = <2>;
-			device-width = <1>;
-		};
-
-	};
-
-	memory {
-		device_type = "memory";
-	};
-
-	soc: soc@ffe000000 {
-		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
-		reg = <0xf 0xfe000000 0 0x00001000>;
-
-	};
-};
-
-&ifc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	compatible = "fsl,ifc", "simple-bus";
-	interrupts = <25 2 0 0>;
-};
-
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "simple-bus";
-
-	soc-sram-error {
-		compatible = "fsl,soc-sram-error";
-		interrupts = <16 2 1 29>;
-	};
-
-	corenet-law@0 {
-		compatible = "fsl,corenet-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <32>;
-	};
-
-	ddr1: memory-controller@8000 {
-		compatible = "fsl,qoriq-memory-controller-v4.7",
-				"fsl,qoriq-memory-controller";
-		reg = <0x8000 0x1000>;
-		interrupts = <16 2 1 23>;
-	};
-
-	ddr2: memory-controller@9000 {
-		compatible = "fsl,qoriq-memory-controller-v4.7",
-				"fsl,qoriq-memory-controller";
-		reg = <0x9000 0x1000>;
-		interrupts = <16 2 1 22>;
-	};
-
-	ddr3: memory-controller@a000 {
-		compatible = "fsl,qoriq-memory-controller-v4.7",
-				"fsl,qoriq-memory-controller";
-		reg = <0xa000 0x1000>;
-		interrupts = <16 2 1 21>;
-	};
-
-	cpc: l3-cache-controller@10000 {
-		compatible = "fsl,t4240-l3-cache-controller", "cache";
-		reg = <0x10000 0x1000
-		       0x11000 0x1000
-		       0x12000 0x1000>;
-		interrupts = <16 2 1 27
-			      16 2 1 26
-			      16 2 1 25>;
-	};
-
-	corenet-cf@18000 {
-		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
-		reg = <0x18000 0x1000>;
-		interrupts = <16 2 1 31>;
-		fsl,ccf-num-csdids = <32>;
-		fsl,ccf-num-snoopids = <32>;
-	};
-
-	iommu@20000 {
-		compatible = "fsl,pamu-v1.0", "fsl,pamu";
-		reg = <0x20000 0x6000>;
-		fsl,portid-mapping = <0x8000>;
-		interrupts = <
-			24 2 0 0
-			16 2 1 30>;
-	};
-
-/include/ "fsl/qoriq-mpic.dtsi"
-
-	guts: global-utilities@e0000 {
-		compatible = "fsl,t4240-device-config", "fsl,qoriq-device-config-2.0";
-		reg = <0xe0000 0xe00>;
-		fsl,has-rstcr;
-		fsl,liodn-bits = <12>;
-	};
-
-/include/ "fsl/qoriq-clockgen2.dtsi"
-	global-utilities@e1000 {
-		compatible = "fsl,t4240-clockgen", "fsl,qoriq-clockgen-2.0";
-	};
-
-/include/ "fsl/qoriq-dma-0.dtsi"
-/include/ "fsl/qoriq-dma-1.dtsi"
-
-/include/ "fsl/qoriq-i2c-0.dtsi"
-/include/ "fsl/qoriq-i2c-1.dtsi"
-/include/ "fsl/qoriq-duart-0.dtsi"
-/include/ "fsl/qoriq-duart-1.dtsi"
-
-	L2_1: l2-cache-controller@c20000 {
-		compatible = "fsl,t4240-l2-cache-controller";
-		reg = <0xc20000 0x40000>;
-		next-level-cache = <&cpc>;
-	};
-	L2_2: l2-cache-controller@c60000 {
-		compatible = "fsl,t4240-l2-cache-controller";
-		reg = <0xc60000 0x40000>;
-		next-level-cache = <&cpc>;
-	};
-	L2_3: l2-cache-controller@ca0000 {
-		compatible = "fsl,t4240-l2-cache-controller";
-		reg = <0xca0000 0x40000>;
-		next-level-cache = <&cpc>;
-	};
-};

From 238cac16c03eef00bcb607e09defee79dadca958 Mon Sep 17 00:00:00 2001
From: Emil Medve <Emilian.Medve@freescale.com>
Date: Wed, 21 Jan 2015 16:22:52 -0600
Subject: [PATCH 03/34] powerpc: Remove duplicate tlbcam_index declarations

They seem to be leftovers from '14cf11a powerpc: Merge enough to start
building in arch/powerpc'

Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/mm/fsl_booke_mmu.c | 2 --
 arch/powerpc/mm/pgtable_32.c    | 1 -
 2 files changed, 3 deletions(-)

diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index 94cd728166d37a..b46912fee7cd6d 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -67,8 +67,6 @@ struct tlbcamrange {
 	phys_addr_t phys;
 } tlbcam_addrs[NUM_TLBCAMS];
 
-extern unsigned int tlbcam_index;
-
 unsigned long tlbcam_sz(int idx)
 {
 	return tlbcam_addrs[idx].limit - tlbcam_addrs[idx].start + 1;
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 50fad3801f3040..6eec88685a71b5 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -63,7 +63,6 @@ void setbat(int index, unsigned long virt, phys_addr_t phys,
 #endif /* HAVE_BATS */
 
 #ifdef HAVE_TLBCAM
-extern unsigned int tlbcam_index;
 extern phys_addr_t v_mapped_by_tlbcam(unsigned long va);
 extern unsigned long p_mapped_by_tlbcam(phys_addr_t pa);
 #else /* !HAVE_TLBCAM */

From d2caa3cebda8b626336e100b80a0ed6f909dccab Mon Sep 17 00:00:00 2001
From: Tom Huynh <tom.huynh@freescale.com>
Date: Tue, 20 Jan 2015 16:19:50 -0600
Subject: [PATCH 04/34] powerpc/perf: fix fsl_emb_pmu_start to write correct
 pmc value

PMCs on PowerPC increases towards 0x80000000 and triggers an overflow
interrupt when the msb is set to collect a sample. Therefore, to setup
for the next sample collection, pmu_start should set the pmc value to
0x80000000 - left instead of left which incorrectly delays the next
overflow interrupt. Same as commit 9a45a9407c69 ("powerpc/perf:
power_pmu_start restores incorrect values, breaking frequency events")
for book3s.

Signed-off-by: Tom Huynh <tom.huynh@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/perf/core-fsl-emb.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/perf/core-fsl-emb.c b/arch/powerpc/perf/core-fsl-emb.c
index 4acaea01fe0313..e9fe904b653804 100644
--- a/arch/powerpc/perf/core-fsl-emb.c
+++ b/arch/powerpc/perf/core-fsl-emb.c
@@ -389,6 +389,7 @@ static void fsl_emb_pmu_del(struct perf_event *event, int flags)
 static void fsl_emb_pmu_start(struct perf_event *event, int ef_flags)
 {
 	unsigned long flags;
+	unsigned long val;
 	s64 left;
 
 	if (event->hw.idx < 0 || !event->hw.sample_period)
@@ -405,7 +406,10 @@ static void fsl_emb_pmu_start(struct perf_event *event, int ef_flags)
 
 	event->hw.state = 0;
 	left = local64_read(&event->hw.period_left);
-	write_pmc(event->hw.idx, left);
+	val = 0;
+	if (left < 0x80000000L)
+		val = 0x80000000L - left;
+	write_pmc(event->hw.idx, val);
 
 	perf_event_update_userpage(event);
 	perf_pmu_enable(event->pmu);

From a7b9f671f2d141528491c346e21e8a179cee9d21 Mon Sep 17 00:00:00 2001
From: LEROY Christophe <christophe.leroy@c-s.fr>
Date: Mon, 19 Jan 2015 17:04:38 +0100
Subject: [PATCH 05/34] powerpc32: adds handling of _PAGE_RO

Some powerpc like the 8xx don't have a RW bit in PTE bits but a RO
(Read Only) bit.  This patch implements the handling of a _PAGE_RO flag
to be used in place of _PAGE_RW

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[scottwood@freescale.com: fix whitespace]
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/include/asm/pgtable-ppc32.h |  8 +++++---
 arch/powerpc/include/asm/pgtable.h       |  7 +++++--
 arch/powerpc/include/asm/pte-common.h    | 25 ++++++++++++++++--------
 arch/powerpc/mm/pgtable_32.c             |  2 +-
 4 files changed, 28 insertions(+), 14 deletions(-)

diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h
index 234e07c4780327..62a3e49a9a149c 100644
--- a/arch/powerpc/include/asm/pgtable-ppc32.h
+++ b/arch/powerpc/include/asm/pgtable-ppc32.h
@@ -275,7 +275,7 @@ static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
 static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
 				      pte_t *ptep)
 {
-	pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0);
+	pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), _PAGE_RO);
 }
 static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
 					   unsigned long addr, pte_t *ptep)
@@ -286,9 +286,11 @@ static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
 
 static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry)
 {
-	unsigned long bits = pte_val(entry) &
+	unsigned long set = pte_val(entry) &
 		(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC);
-	pte_update(ptep, 0, bits);
+	unsigned long clr = ~pte_val(entry) & _PAGE_RO;
+
+	pte_update(ptep, clr, set);
 }
 
 #define __HAVE_ARCH_PTE_SAME
diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
index a8805fee0df91b..7e77f2ca51325a 100644
--- a/arch/powerpc/include/asm/pgtable.h
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -30,7 +30,8 @@ struct mm_struct;
 #include <asm/tlbflush.h>
 
 /* Generic accessors to PTE bits */
-static inline int pte_write(pte_t pte)		{ return pte_val(pte) & _PAGE_RW; }
+static inline int pte_write(pte_t pte)
+{	return (pte_val(pte) & (_PAGE_RW | _PAGE_RO)) != _PAGE_RO; }
 static inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
 static inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
 static inline int pte_file(pte_t pte)		{ return pte_val(pte) & _PAGE_FILE; }
@@ -115,12 +116,14 @@ static inline unsigned long pte_pfn(pte_t pte)	{
 
 /* Generic modifiers for PTE bits */
 static inline pte_t pte_wrprotect(pte_t pte) {
-	pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; }
+	pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE);
+	pte_val(pte) |= _PAGE_RO; return pte; }
 static inline pte_t pte_mkclean(pte_t pte) {
 	pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; }
 static inline pte_t pte_mkold(pte_t pte) {
 	pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
 static inline pte_t pte_mkwrite(pte_t pte) {
+	pte_val(pte) &= ~_PAGE_RO;
 	pte_val(pte) |= _PAGE_RW; return pte; }
 static inline pte_t pte_mkdirty(pte_t pte) {
 	pte_val(pte) |= _PAGE_DIRTY; return pte; }
diff --git a/arch/powerpc/include/asm/pte-common.h b/arch/powerpc/include/asm/pte-common.h
index e040c3595129e4..2aef9b7a0eb2af 100644
--- a/arch/powerpc/include/asm/pte-common.h
+++ b/arch/powerpc/include/asm/pte-common.h
@@ -34,6 +34,12 @@
 #ifndef _PAGE_PSIZE
 #define _PAGE_PSIZE		0
 #endif
+/* _PAGE_RO and _PAGE_RW shall not be defined at the same time */
+#ifndef _PAGE_RO
+#define _PAGE_RO 0
+#else
+#define _PAGE_RW 0
+#endif
 #ifndef _PMD_PRESENT_MASK
 #define _PMD_PRESENT_MASK	_PMD_PRESENT
 #endif
@@ -42,10 +48,10 @@
 #define PMD_PAGE_SIZE(pmd)	bad_call_to_PMD_PAGE_SIZE()
 #endif
 #ifndef _PAGE_KERNEL_RO
-#define _PAGE_KERNEL_RO		0
+#define _PAGE_KERNEL_RO		(_PAGE_RO)
 #endif
 #ifndef _PAGE_KERNEL_ROX
-#define _PAGE_KERNEL_ROX	(_PAGE_EXEC)
+#define _PAGE_KERNEL_ROX	(_PAGE_EXEC | _PAGE_RO)
 #endif
 #ifndef _PAGE_KERNEL_RW
 #define _PAGE_KERNEL_RW		(_PAGE_DIRTY | _PAGE_RW | _PAGE_HWWRITE)
@@ -95,7 +101,7 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
 /* Mask of bits returned by pte_pgprot() */
 #define PAGE_PROT_BITS	(_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \
 			 _PAGE_WRITETHRU | _PAGE_ENDIAN | _PAGE_4K_PFN | \
-			 _PAGE_USER | _PAGE_ACCESSED | \
+			 _PAGE_USER | _PAGE_ACCESSED | _PAGE_RO | \
 			 _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | _PAGE_EXEC)
 
 #ifdef CONFIG_NUMA_BALANCING
@@ -128,11 +134,14 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
  */
 #define PAGE_NONE	__pgprot(_PAGE_BASE)
 #define PAGE_SHARED	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW)
-#define PAGE_SHARED_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC)
-#define PAGE_COPY	__pgprot(_PAGE_BASE | _PAGE_USER)
-#define PAGE_COPY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
-#define PAGE_READONLY	__pgprot(_PAGE_BASE | _PAGE_USER)
-#define PAGE_READONLY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_SHARED_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | \
+				 _PAGE_EXEC)
+#define PAGE_COPY	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RO)
+#define PAGE_COPY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RO | \
+				 _PAGE_EXEC)
+#define PAGE_READONLY	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RO)
+#define PAGE_READONLY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RO | \
+				 _PAGE_EXEC)
 
 #define __P000	PAGE_NONE
 #define __P001	PAGE_READONLY
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 6eec88685a71b5..83313962043128 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -146,7 +146,7 @@ void __iomem *
 ioremap_prot(phys_addr_t addr, unsigned long size, unsigned long flags)
 {
 	/* writeable implies dirty for kernel addresses */
-	if (flags & _PAGE_RW)
+	if ((flags & (_PAGE_RW | _PAGE_RO)) != _PAGE_RO)
 		flags |= _PAGE_DIRTY | _PAGE_HWWRITE;
 
 	/* we don't want to let _PAGE_USER and _PAGE_EXEC leak out */

From cadbfd01468663e8b9f9518a58ef67398a20d06b Mon Sep 17 00:00:00 2001
From: LEROY Christophe <christophe.leroy@c-s.fr>
Date: Mon, 19 Jan 2015 17:04:44 +0100
Subject: [PATCH 06/34] powerpc/8xx: use _PAGE_RO instead of _PAGE_RW

On powerpc 8xx, in TLB entries, 0x400 bit is set to 1 for read-only pages
and is set to 0 for RW pages. So we should use _PAGE_RO instead of _PAGE_RW

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/include/asm/pgtable-ppc32.h | 11 +++++------
 arch/powerpc/include/asm/pte-8xx.h       |  9 ++++-----
 arch/powerpc/kernel/head_8xx.S           |  3 ---
 3 files changed, 9 insertions(+), 14 deletions(-)

diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h
index 62a3e49a9a149c..9cde3c1522e316 100644
--- a/arch/powerpc/include/asm/pgtable-ppc32.h
+++ b/arch/powerpc/include/asm/pgtable-ppc32.h
@@ -178,12 +178,11 @@ static inline unsigned long pte_update(pte_t *p,
 	andc	%1,%0,%5\n\
 	or	%1,%1,%6\n\
 	/* 0x200 == Extended encoding, bit 22 */ \
-	/* Bit 22 has to be 1 if neither _PAGE_USER nor _PAGE_RW are set */ \
-	rlwimi	%1,%1,32-2,0x200\n /* get _PAGE_USER */ \
-	rlwinm	%3,%1,32-1,0x200\n /* get _PAGE_RW */ \
-	or	%1,%3,%1\n\
-	xori	%1,%1,0x200\n"
-"	stwcx.	%1,0,%4\n\
+	/* Bit 22 has to be 1 when _PAGE_USER is unset and _PAGE_RO is set */ \
+	rlwimi	%1,%1,32-1,0x200\n /* get _PAGE_RO */ \
+	rlwinm	%3,%1,32-2,0x200\n /* get _PAGE_USER */ \
+	andc	%1,%1,%3\n\
+	stwcx.	%1,0,%4\n\
 	bne-	1b"
 	: "=&r" (old), "=&r" (tmp), "=m" (*p), "=&r" (tmp2)
 	: "r" (p), "r" (clr), "r" (set), "m" (*p)
diff --git a/arch/powerpc/include/asm/pte-8xx.h b/arch/powerpc/include/asm/pte-8xx.h
index daa4616e61c4a2..eb6edb44f14042 100644
--- a/arch/powerpc/include/asm/pte-8xx.h
+++ b/arch/powerpc/include/asm/pte-8xx.h
@@ -46,9 +46,9 @@
  * require a TLB exception handler change.  It is assumed unused bits
  * are always zero.
  */
-#define _PAGE_RW	0x0400	/* lsb PP bits, inverted in HW */
+#define _PAGE_RO	0x0400	/* lsb PP bits */
 #define _PAGE_USER	0x0800	/* msb PP bits */
-/* set when neither _PAGE_USER nor _PAGE_RW are set */
+/* set when _PAGE_USER is unset and _PAGE_RO is set */
 #define _PAGE_KNLRO	0x0200
 
 #define _PMD_PRESENT	0x0001
@@ -62,9 +62,8 @@
 #define PTE_ATOMIC_UPDATES	1
 
 /* We need to add _PAGE_SHARED to kernel pages */
-#define _PAGE_KERNEL_RO	(_PAGE_SHARED | _PAGE_KNLRO)
-#define _PAGE_KERNEL_ROX	(_PAGE_EXEC | _PAGE_KNLRO)
-#define _PAGE_KERNEL_RW	(_PAGE_DIRTY | _PAGE_RW | _PAGE_HWWRITE)
+#define _PAGE_KERNEL_RO	(_PAGE_SHARED | _PAGE_RO | _PAGE_KNLRO)
+#define _PAGE_KERNEL_ROX	(_PAGE_EXEC | _PAGE_RO | _PAGE_KNLRO)
 
 #endif /* __KERNEL__ */
 #endif /*  _ASM_POWERPC_PTE_8xx_H */
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index d99aac0d69f1b6..65492d0439647a 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -441,9 +441,6 @@ DataStoreTLBMiss:
 	and	r11, r11, r10
 	rlwimi	r10, r11, 0, _PAGE_PRESENT
 #endif
-	/* invert RW */
-	xori	r10, r10, _PAGE_RW
-
 	/* The Linux PTE won't go exactly into the MMU TLB.
 	 * Software indicator bits 22 and 28 must be clear.
 	 * Software indicator bits 24, 25, 26, and 27 must be

From 7f93c9d90f4dc7084217cf94574e427bad40e37c Mon Sep 17 00:00:00 2001
From: Shaohui Xie <Shaohui.Xie@freescale.com>
Date: Wed, 28 Jan 2015 19:54:24 +0800
Subject: [PATCH 07/34] power/fsl: add MDIO dt binding for FMan

This binding is for FMan MDIO, it covers FMan v2 & FMan v3.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
[scottwood@freescale.com: mark interrupts required only for external]
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 .../devicetree/bindings/powerpc/fsl/fman.txt  | 70 +++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
index edeea160ca396b..edda55f7400415 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
@@ -7,6 +7,7 @@ CONTENTS
   - FMan MURAM Node
   - FMan dTSEC/XGEC/mEMAC Node
   - FMan IEEE 1588 Node
+  - FMan MDIO Node
   - Example
 
 =============================================================================
@@ -356,6 +357,69 @@ ptp-timer@fe000 {
 	reg = <0xfe000 0x1000>;
 };
 
+=============================================================================
+FMan MDIO Node
+
+DESCRIPTION
+
+The MDIO is a bus to which the PHY devices are connected.
+
+PROPERTIES
+
+- compatible
+		Usage: required
+		Value type: <stringlist>
+		Definition: A standard property.
+		Must include "fsl,fman-mdio" for 1 Gb/s MDIO from FMan v2.
+		Must include "fsl,fman-xmdio" for 10 Gb/s MDIO from FMan v2.
+		Must include "fsl,fman-memac-mdio" for 1/10 Gb/s MDIO from
+		FMan v3.
+
+- reg
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A standard property.
+
+- bus-frequency
+		Usage: optional
+		Value type: <u32>
+		Definition: Specifies the external MDIO bus clock speed to
+		be used, if different from the standard 2.5 MHz.
+		This may be due to the standard speed being unsupported (e.g.
+		due to a hardware problem), or to advertise that all relevant
+		components in the system support a faster speed.
+
+- interrupts
+		Usage: required for external MDIO
+		Value type: <prop-encoded-array>
+		Definition: Event interrupt of external MDIO controller.
+
+- fsl,fman-internal-mdio
+		Usage: required for internal MDIO
+		Value type: boolean
+		Definition: Fman has internal MDIO for internal PCS(Physical
+		Coding Sublayer) PHYs and external MDIO for external PHYs.
+		The settings and programming routines for internal/external
+		MDIO are different. Must be included for internal MDIO.
+
+EXAMPLE
+
+Example for FMan v2 external MDIO:
+
+mdio@f1000 {
+	compatible = "fsl,fman-xmdio";
+	reg = <0xf1000 0x1000>;
+	interrupts = <101 2 0 0>;
+};
+
+Example for FMan v3 internal MDIO:
+
+mdio@f1000 {
+	compatible = "fsl,fman-memac-mdio";
+	reg = <0xf1000 0x1000>;
+	fsl,fman-internal-mdio;
+};
+
 =============================================================================
 Example
 
@@ -531,4 +595,10 @@ fman@400000 {
 		compatible = "fsl,fman-ptp-timer";
 		reg = <0xfe000 0x1000>;
 	};
+
+	mdio@f1000 {
+		compatible = "fsl,fman-xmdio";
+		reg = <0xf1000 0x1000>;
+		interrupts = <101 2 0 0>;
+	};
 };

From debddd95ec0bb8ac1bbe719b5e4588e453c7b2fc Mon Sep 17 00:00:00 2001
From: LEROY Christophe <christophe.leroy@c-s.fr>
Date: Mon, 19 Jan 2015 16:44:42 +0100
Subject: [PATCH 08/34] powerpc/8xx: reduce pressure on TLB due to context
 switches

For nohash powerpc, when we run out of contexts, contexts are freed by stealing
used contexts in-turn. When a victim has been selected, the associated TLB
entries are freed using _tlbil_pid(). Unfortunatly, on the PPC 8xx, _tlbil_pid()
does a tlbia, hence flushes ALL TLB entries and not only the one linked to the
stolen context. Therefore, as implented today, at each task switch requiring a
new context, all entries are flushed.

This patch modifies the implementation so that when running out of contexts, all
contexts get freed at once, hence dividing the number of calls to tlbia by 16.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/mm/mmu_context_nohash.c | 43 +++++++++++++++++++++++++++-
 1 file changed, 42 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index 9cba6cba2e50a9..986afbc22c76b2 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -52,12 +52,15 @@
 #include <asm/mmu_context.h>
 #include <asm/tlbflush.h>
 
+#include "mmu_decl.h"
+
 static unsigned int first_context, last_context;
 static unsigned int next_context, nr_free_contexts;
 static unsigned long *context_map;
 static unsigned long *stale_map[NR_CPUS];
 static struct mm_struct **context_mm;
 static DEFINE_RAW_SPINLOCK(context_lock);
+static bool no_selective_tlbil;
 
 #define CTX_MAP_SIZE	\
 	(sizeof(unsigned long) * (last_context / BITS_PER_LONG + 1))
@@ -133,6 +136,38 @@ static unsigned int steal_context_smp(unsigned int id)
 }
 #endif  /* CONFIG_SMP */
 
+static unsigned int steal_all_contexts(void)
+{
+	struct mm_struct *mm;
+	int cpu = smp_processor_id();
+	unsigned int id;
+
+	for (id = first_context; id <= last_context; id++) {
+		/* Pick up the victim mm */
+		mm = context_mm[id];
+
+		pr_hardcont(" | steal %d from 0x%p", id, mm);
+
+		/* Mark this mm as having no context anymore */
+		mm->context.id = MMU_NO_CONTEXT;
+		if (id != first_context) {
+			context_mm[id] = NULL;
+			__clear_bit(id, context_map);
+#ifdef DEBUG_MAP_CONSISTENCY
+			mm->context.active = 0;
+#endif
+		}
+		__clear_bit(id, stale_map[cpu]);
+	}
+
+	/* Flush the TLB for all contexts (not to be used on SMP) */
+	_tlbil_all();
+
+	nr_free_contexts = last_context - first_context;
+
+	return first_context;
+}
+
 /* Note that this will also be called on SMP if all other CPUs are
  * offlined, which means that it may be called for cpu != 0. For
  * this to work, we somewhat assume that CPUs that are onlined
@@ -241,7 +276,10 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 			goto stolen;
 		}
 #endif /* CONFIG_SMP */
-		id = steal_context_up(id);
+		if (no_selective_tlbil)
+			id = steal_all_contexts();
+		else
+			id = steal_context_up(id);
 		goto stolen;
 	}
 	nr_free_contexts--;
@@ -407,12 +445,15 @@ void __init mmu_context_init(void)
 	if (mmu_has_feature(MMU_FTR_TYPE_8xx)) {
 		first_context = 0;
 		last_context = 15;
+		no_selective_tlbil = true;
 	} else if (mmu_has_feature(MMU_FTR_TYPE_47x)) {
 		first_context = 1;
 		last_context = 65535;
+		no_selective_tlbil = false;
 	} else {
 		first_context = 1;
 		last_context = 255;
+		no_selective_tlbil = false;
 	}
 
 #ifdef DEBUG_CLAMP_LAST_CONTEXT

From 2374d0af29c154d6d989987a94278caed8c13be5 Mon Sep 17 00:00:00 2001
From: LEROY Christophe <christophe.leroy@c-s.fr>
Date: Tue, 20 Jan 2015 10:57:33 +0100
Subject: [PATCH 09/34] powerpc/8xx: remove remaining unnecessary code in
 FixupDAR

Since commit 33fb845a6f01 ("powerpc/8xx: Don't use MD_TWC for walk"), MD_EPN and
MD_TWC are not writen anymore in FixupDAR so saving r3 has become useless.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/kernel/head_8xx.S | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 65492d0439647a..73715cd0de452f 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -529,9 +529,6 @@ DARFixed:/* Return from dcbx instruction bug workaround */
  /* define if you don't want to use self modifying code */
 #define NO_SELF_MODIFYING_CODE
 FixupDAR:/* Entry point for dcbx workaround. */
-#ifdef CONFIG_8xx_CPU6
-	mtspr	SPRN_DAR, r3
-#endif
 	mtspr	SPRN_SPRG_SCRATCH2, r10
 	/* fetch instruction from memory. */
 	mfspr	r10, SPRN_SRR0
@@ -548,9 +545,6 @@ FixupDAR:/* Entry point for dcbx workaround. */
 	/* Extract level 2 index */
 	rlwinm	r11, r11, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29
 	lwzx	r11, r10, r11	/* Get the pte */
-#ifdef CONFIG_8xx_CPU6
-	mfspr	r3, SPRN_DAR
-#endif
 	/* concat physical page address(r11) and page offset(r10) */
 	mfspr	r10, SPRN_SRR0
 	rlwimi	r11, r10, 0, 32 - PAGE_SHIFT, 31

From 5ddb75cee5afab3bdaf6eb4efefc8029923a9cc7 Mon Sep 17 00:00:00 2001
From: LEROY Christophe <christophe.leroy@c-s.fr>
Date: Tue, 20 Jan 2015 10:57:33 +0100
Subject: [PATCH 10/34] powerpc/8xx: remove tests on PGDIR entry validity

Kernel MMU handling code handles validity of entries via _PMD_PRESENT which
corresponds to V bit in MD_TWC and MI_TWC. When the V bit is not set, MPC8xx
triggers TLBError exception. So we don't have to check that and branch ourself
to TLBError. We can set TLB entries with non present entries, remove all those
tests and let the 8xx handle it. This reduce the number of cycle when the
entries are valid which is the case most of the time, and doesn't significantly
increase the time for handling invalid entries.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/kernel/head_8xx.S | 41 +++++++---------------------------
 1 file changed, 8 insertions(+), 33 deletions(-)

diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 73715cd0de452f..32cc9e55b772ab 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -329,12 +329,9 @@ InstructionTLBMiss:
 	/* Extract level 1 index */
 	rlwinm	r10, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
 	lwzx	r11, r10, r11	/* Get the level 1 entry */
-	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
-	beq	2f		/* If zero, don't try to find a pte */
+	rlwinm	r10, r11,0,0,19	/* Extract page descriptor page address */
 
-	/* We have a pte table, so load the MI_TWC with the attributes
-	 * for this "segment."
-	 */
+	/* Load the MI_TWC with the attributes for this "segment." */
 	MTSPR_CPU6(SPRN_MI_TWC, r11, r3)	/* Set segment attributes */
 	mfspr	r11, SPRN_SRR0	/* Get effective address of fault */
 	/* Extract level 2 index */
@@ -342,13 +339,11 @@ InstructionTLBMiss:
 	lwzx	r10, r10, r11	/* Get the pte */
 
 #ifdef CONFIG_SWAP
-	andi.	r11, r10, _PAGE_ACCESSED | _PAGE_PRESENT
-	cmpwi	cr0, r11, _PAGE_ACCESSED | _PAGE_PRESENT
-	li	r11, RPN_PATTERN
-	bne-	cr0, 2f
-#else
-	li	r11, RPN_PATTERN
+	rlwinm	r11, r10, 32-5, _PAGE_PRESENT
+	and	r11, r11, r10
+	rlwimi	r10, r11, 0, _PAGE_PRESENT
 #endif
+	li	r11, RPN_PATTERN
 	/* The Linux PTE won't go exactly into the MMU TLB.
 	 * Software indicator bits 21 and 28 must be clear.
 	 * Software indicator bits 24, 25, 26, and 27 must be
@@ -366,21 +361,6 @@ InstructionTLBMiss:
 	mfspr	r10, SPRN_SPRG_SCRATCH2
 	EXCEPTION_EPILOG_0
 	rfi
-2:
-	mfspr	r10, SPRN_SRR1
-	/* clear all error bits as TLB Miss
-	 * sets a few unconditionally
-	*/
-	rlwinm	r10, r10, 0, 0xffff
-	mtspr	SPRN_SRR1, r10
-
-	/* Restore registers */
-#ifdef CONFIG_8xx_CPU6
-	mfspr	r3, SPRN_DAR
-	mtspr	SPRN_DAR, r11	/* Tag DAR */
-#endif
-	mfspr	r10, SPRN_SPRG_SCRATCH2
-	b	InstructionTLBError1
 
 	. = 0x1200
 DataStoreTLBMiss:
@@ -403,8 +383,6 @@ DataStoreTLBMiss:
 	/* Extract level 1 index */
 	rlwinm	r10, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
 	lwzx	r11, r10, r11	/* Get the level 1 entry */
-	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
-	beq	2f		/* If zero, don't try to find a pte */
 
 	/* We have a pte table, so load fetch the pte from the table.
 	 */
@@ -447,7 +425,7 @@ DataStoreTLBMiss:
 	 * set.  All other Linux PTE bits control the behavior
 	 * of the MMU.
 	 */
-2:	li	r11, RPN_PATTERN
+	li	r11, RPN_PATTERN
 	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
 	MTSPR_CPU6(SPRN_MD_RPN, r10, r3)	/* Update TLB entry */
 
@@ -466,10 +444,7 @@ DataStoreTLBMiss:
  */
 	. = 0x1300
 InstructionTLBError:
-	EXCEPTION_PROLOG_0
-InstructionTLBError1:
-	EXCEPTION_PROLOG_1
-	EXCEPTION_PROLOG_2
+	EXCEPTION_PROLOG
 	mr	r4,r12
 	mr	r5,r9
 	andis.	r10,r5,0x4000

From ce67f5d0a00cce231e62334c3624737623c32d6a Mon Sep 17 00:00:00 2001
From: LEROY Christophe <christophe.leroy@c-s.fr>
Date: Tue, 20 Jan 2015 10:57:34 +0100
Subject: [PATCH 11/34] powerpc32: Use kmem_cache memory for PGDIR

When pages are not 4K, PGDIR table is allocated with kmalloc(). In order to
optimise TLB handlers, aligned memory is needed. kmalloc() doesn't provide
aligned memory blocks, so lets use a kmem_cache pool instead.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/include/asm/pgtable-ppc32.h |  4 ++++
 arch/powerpc/mm/pgtable_32.c             | 16 ++++++++++++++--
 2 files changed, 18 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h
index 9cde3c1522e316..26ce0ab0a9e45f 100644
--- a/arch/powerpc/include/asm/pgtable-ppc32.h
+++ b/arch/powerpc/include/asm/pgtable-ppc32.h
@@ -347,10 +347,14 @@ static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry)
 #define pte_to_pgoff(pte)	(pte_val(pte) >> 3)
 #define pgoff_to_pte(off)	((pte_t) { ((off) << 3) | _PAGE_FILE })
 
+#ifndef CONFIG_PPC_4K_PAGES
+void pgtable_cache_init(void);
+#else
 /*
  * No page table caches to initialise
  */
 #define pgtable_cache_init()	do { } while (0)
+#endif
 
 extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep,
 		      pmd_t **pmdp);
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 83313962043128..03b1a3b0fbd539 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -72,13 +72,25 @@ extern unsigned long p_mapped_by_tlbcam(phys_addr_t pa);
 
 #define PGDIR_ORDER	(32 + PGD_T_LOG2 - PGDIR_SHIFT)
 
+#ifndef CONFIG_PPC_4K_PAGES
+static struct kmem_cache *pgtable_cache;
+
+void pgtable_cache_init(void)
+{
+	pgtable_cache = kmem_cache_create("PGDIR cache", 1 << PGDIR_ORDER,
+					  1 << PGDIR_ORDER, 0, NULL);
+	if (pgtable_cache == NULL)
+		panic("Couldn't allocate pgtable caches");
+}
+#endif
+
 pgd_t *pgd_alloc(struct mm_struct *mm)
 {
 	pgd_t *ret;
 
 	/* pgdir take page or two with 4K pages and a page fraction otherwise */
 #ifndef CONFIG_PPC_4K_PAGES
-	ret = kzalloc(1 << PGDIR_ORDER, GFP_KERNEL);
+	ret = kmem_cache_alloc(pgtable_cache, GFP_KERNEL | __GFP_ZERO);
 #else
 	ret = (pgd_t *)__get_free_pages(GFP_KERNEL|__GFP_ZERO,
 			PGDIR_ORDER - PAGE_SHIFT);
@@ -89,7 +101,7 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
 void pgd_free(struct mm_struct *mm, pgd_t *pgd)
 {
 #ifndef CONFIG_PPC_4K_PAGES
-	kfree((void *)pgd);
+	kmem_cache_free(pgtable_cache, (void *)pgd);
 #else
 	free_pages((unsigned long)pgd, PGDIR_ORDER - PAGE_SHIFT);
 #endif

From 17bb312f4c75e59ef6f18015011c4efbb545a748 Mon Sep 17 00:00:00 2001
From: LEROY Christophe <christophe.leroy@c-s.fr>
Date: Tue, 20 Jan 2015 10:57:34 +0100
Subject: [PATCH 12/34] powerpc/8xx: Take benefit of aligned PGDIR

L1 base address is now aligned so we can insert L1 index into r11 directly and
then preserve r10

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/kernel/head_8xx.S | 34 +++++++++++++++-------------------
 1 file changed, 15 insertions(+), 19 deletions(-)

diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 32cc9e55b772ab..0ab16b66d712d4 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -326,16 +326,15 @@ InstructionTLBMiss:
 	ori	r11, r11, (swapper_pg_dir-PAGE_OFFSET)@l
 3:
 #endif
-	/* Extract level 1 index */
-	rlwinm	r10, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
-	lwzx	r11, r10, r11	/* Get the level 1 entry */
-	rlwinm	r10, r11,0,0,19	/* Extract page descriptor page address */
+	/* Insert level 1 index */
+	rlwimi	r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
+	lwz	r11, 0(r11)	/* Get the level 1 entry */
 
 	/* Load the MI_TWC with the attributes for this "segment." */
 	MTSPR_CPU6(SPRN_MI_TWC, r11, r3)	/* Set segment attributes */
-	mfspr	r11, SPRN_SRR0	/* Get effective address of fault */
+	rlwinm	r11, r11,0,0,19	/* Extract page descriptor page address */
 	/* Extract level 2 index */
-	rlwinm	r11, r11, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29
+	rlwinm	r10, r10, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29
 	lwzx	r10, r10, r11	/* Get the pte */
 
 #ifdef CONFIG_SWAP
@@ -380,13 +379,12 @@ DataStoreTLBMiss:
 	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@h
 	ori	r11, r11, (swapper_pg_dir-PAGE_OFFSET)@l
 3:
-	/* Extract level 1 index */
-	rlwinm	r10, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
-	lwzx	r11, r10, r11	/* Get the level 1 entry */
+	/* Insert level 1 index */
+	rlwimi	r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
+	lwz	r11, 0(r11)	/* Get the level 1 entry */
 
 	/* We have a pte table, so load fetch the pte from the table.
 	 */
-	mfspr	r10, SPRN_MD_EPN	/* Get address of fault */
 	/* Extract level 2 index */
 	rlwinm	r10, r10, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29
 	rlwimi	r10, r11, 0, 0, 32 - PAGE_SHIFT - 1	/* Add level 2 base */
@@ -512,16 +510,14 @@ FixupDAR:/* Entry point for dcbx workaround. */
 	beq-	3f		/* Branch if user space */
 	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@h
 	ori	r11, r11, (swapper_pg_dir-PAGE_OFFSET)@l
-	/* Extract level 1 index */
-3:	rlwinm	r10, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
-	lwzx	r11, r10, r11	/* Get the level 1 entry */
-	rlwinm	r10, r11,0,0,19	/* Extract page descriptor page address */
-	mfspr	r11, SPRN_SRR0	/* Get effective address of fault */
-	/* Extract level 2 index */
-	rlwinm	r11, r11, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29
-	lwzx	r11, r10, r11	/* Get the pte */
+	/* Insert level 1 index */
+3:	rlwimi	r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
+	lwz	r11, 0(r11)	/* Get the level 1 entry */
+	rlwinm	r11, r11,0,0,19	/* Extract page descriptor page address */
+	/* Insert level 2 index */
+	rlwimi	r11, r10, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29
+	lwz	r11, 0(r11)	/* Get the pte */
 	/* concat physical page address(r11) and page offset(r10) */
-	mfspr	r10, SPRN_SRR0
 	rlwimi	r11, r10, 0, 32 - PAGE_SHIFT, 31
 	lwz	r11,0(r11)
 /* Check if it really is a dcbx instruction. */

From fde5a9057fcf2e96da1de3b6acf815c1e7d73f1e Mon Sep 17 00:00:00 2001
From: LEROY Christophe <christophe.leroy@c-s.fr>
Date: Tue, 20 Jan 2015 10:57:34 +0100
Subject: [PATCH 13/34] powerpc/8xx: Optimise access to swapper_pg_dir

All accessed to PGD entries are done via 0(r11).
By using lower part of swapper_pg_dir as load index to r11, we can remove the
ori instruction.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/kernel/head_8xx.S | 35 ++++++++++++++++++----------------
 1 file changed, 19 insertions(+), 16 deletions(-)

diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 0ab16b66d712d4..24934e79cd2353 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -319,16 +319,15 @@ InstructionTLBMiss:
 	 * pin the first 8MB of kernel memory */
 	andis.	r11, r10, 0x8000	/* Address >= 0x80000000 */
 #endif
-	mfspr	r11, SPRN_M_TW	/* Get level 1 table base address */
+	mfspr	r11, SPRN_M_TW	/* Get level 1 table */
 #ifdef CONFIG_MODULES
 	beq	3f
-	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@h
-	ori	r11, r11, (swapper_pg_dir-PAGE_OFFSET)@l
+	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@ha
 3:
 #endif
 	/* Insert level 1 index */
 	rlwimi	r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
-	lwz	r11, 0(r11)	/* Get the level 1 entry */
+	lwz	r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11)	/* Get the level 1 entry */
 
 	/* Load the MI_TWC with the attributes for this "segment." */
 	MTSPR_CPU6(SPRN_MI_TWC, r11, r3)	/* Set segment attributes */
@@ -374,14 +373,13 @@ DataStoreTLBMiss:
 	 * kernel page tables.
 	 */
 	andis.	r11, r10, 0x8000
-	mfspr	r11, SPRN_M_TW	/* Get level 1 table base address */
+	mfspr	r11, SPRN_M_TW	/* Get level 1 table */
 	beq	3f
-	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@h
-	ori	r11, r11, (swapper_pg_dir-PAGE_OFFSET)@l
+	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@ha
 3:
 	/* Insert level 1 index */
 	rlwimi	r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
-	lwz	r11, 0(r11)	/* Get the level 1 entry */
+	lwz	r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11)	/* Get the level 1 entry */
 
 	/* We have a pte table, so load fetch the pte from the table.
 	 */
@@ -506,13 +504,12 @@ FixupDAR:/* Entry point for dcbx workaround. */
 	/* fetch instruction from memory. */
 	mfspr	r10, SPRN_SRR0
 	andis.	r11, r10, 0x8000	/* Address >= 0x80000000 */
-	mfspr	r11, SPRN_M_TW	/* Get level 1 table base address */
-	beq-	3f		/* Branch if user space */
-	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@h
-	ori	r11, r11, (swapper_pg_dir-PAGE_OFFSET)@l
+	mfspr	r11, SPRN_M_TW	/* Get level 1 table */
+	beq	3f
+	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@ha
 	/* Insert level 1 index */
 3:	rlwimi	r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
-	lwz	r11, 0(r11)	/* Get the level 1 entry */
+	lwz	r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11)	/* Get the level 1 entry */
 	rlwinm	r11, r11,0,0,19	/* Extract page descriptor page address */
 	/* Insert level 2 index */
 	rlwimi	r11, r10, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29
@@ -667,8 +664,7 @@ start_here:
 	 * init's THREAD like the context switch code does, but this is
 	 * easier......until someone changes init's static structures.
 	 */
-	lis	r6, swapper_pg_dir@h
-	ori	r6, r6, swapper_pg_dir@l
+	lis	r6, swapper_pg_dir@ha
 	tophys(r6,r6)
 #ifdef CONFIG_8xx_CPU6
 	lis	r4, cpu6_errata_word@h
@@ -847,6 +843,13 @@ _GLOBAL(set_context)
 	stw	r4, 0x4(r5)
 #endif
 
+	/* Register M_TW will contain base address of level 1 table minus the
+	 * lower part of the kernel PGDIR base address, so that all accesses to
+	 * level 1 table are done relative to lower part of kernel PGDIR base
+	 * address.
+	 */
+	li	r5, (swapper_pg_dir-PAGE_OFFSET)@l
+	sub	r4, r4, r5
 #ifdef CONFIG_8xx_CPU6
 	lis	r6, cpu6_errata_word@h
 	ori	r6, r6, cpu6_errata_word@l
@@ -854,7 +857,7 @@ _GLOBAL(set_context)
 	li	r7, 0x3f80
 	stw	r7, 12(r6)
 	lwz	r7, 12(r6)
-        mtspr   SPRN_M_TW, r4               /* Update MMU base address */
+	mtspr	SPRN_M_TW, r4		/* Update pointeur to level 1 table */
 	li	r7, 0x3380
 	stw	r7, 12(r6)
 	lwz	r7, 12(r6)

From 4545ff7ed841df77a239a22bffed4fc977a7d7bc Mon Sep 17 00:00:00 2001
From: LEROY Christophe <christophe.leroy@c-s.fr>
Date: Tue, 20 Jan 2015 10:57:34 +0100
Subject: [PATCH 14/34] powerpc/8xx: Remove duplicated code in set_context()

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/kernel/head_8xx.S | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 24934e79cd2353..9b53fe139bf6f5 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -850,23 +850,21 @@ _GLOBAL(set_context)
 	 */
 	li	r5, (swapper_pg_dir-PAGE_OFFSET)@l
 	sub	r4, r4, r5
+	tophys	(r4, r4)
 #ifdef CONFIG_8xx_CPU6
 	lis	r6, cpu6_errata_word@h
 	ori	r6, r6, cpu6_errata_word@l
-	tophys	(r4, r4)
 	li	r7, 0x3f80
 	stw	r7, 12(r6)
 	lwz	r7, 12(r6)
+#endif
 	mtspr	SPRN_M_TW, r4		/* Update pointeur to level 1 table */
+#ifdef CONFIG_8xx_CPU6
 	li	r7, 0x3380
 	stw	r7, 12(r6)
 	lwz	r7, 12(r6)
-        mtspr   SPRN_M_CASID, r3             /* Update context */
-#else
-        mtspr   SPRN_M_CASID,r3		/* Update context */
-	tophys	(r4, r4)
-	mtspr	SPRN_M_TW, r4		/* and pgd */
 #endif
+	mtspr	SPRN_M_CASID, r3	/* Update context */
 	SYNC
 	blr
 

From 974ff4e2d71148655f0ea23096dbca4555d24dab Mon Sep 17 00:00:00 2001
From: Esben Haabendal <eha@deif.com>
Date: Tue, 6 Jan 2015 12:26:59 +0100
Subject: [PATCH 15/34] powerpc: Add machine_check cpu function for e300c3 cpus

Signed-off-by: Esben Haabendal <eha@deif.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/kernel/cputable.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 8084059063365c..f337666768a765 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1133,6 +1133,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.cpu_setup		= __setup_cpu_603,
+		.machine_check		= machine_check_generic,
 		.num_pmcs		= 4,
 		.oprofile_cpu_type	= "ppc/e300",
 		.oprofile_type		= PPC_OPROFILE_FSL_EMB,

From cbe8c43dfd9426104ef74389a287d4f200960811 Mon Sep 17 00:00:00 2001
From: Andy Fleming <afleming@gmail.com>
Date: Tue, 23 Dec 2014 18:17:56 +0800
Subject: [PATCH 16/34] powerpc/config: Enable MDIO support

Also, enable Vitesse PHY and fixed PHY support.

Signed-off-by: Andy Fleming <afleming@gmail.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/configs/corenet32_smp_defconfig | 1 +
 arch/powerpc/configs/corenet64_smp_defconfig | 4 ++++
 2 files changed, 5 insertions(+)

diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig
index 2826bb4ff56058..4d0771aad9aa11 100644
--- a/arch/powerpc/configs/corenet32_smp_defconfig
+++ b/arch/powerpc/configs/corenet32_smp_defconfig
@@ -92,6 +92,7 @@ CONFIG_SATA_SIL=y
 CONFIG_PATA_SIL680=y
 CONFIG_NETDEVICES=y
 CONFIG_FSL_PQ_MDIO=y
+CONFIG_FSL_XGMAC_MDIO=y
 CONFIG_E1000=y
 CONFIG_E1000E=y
 CONFIG_AT803X_PHY=y
diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig
index 6db97e4414b2ea..88b475185611ae 100644
--- a/arch/powerpc/configs/corenet64_smp_defconfig
+++ b/arch/powerpc/configs/corenet64_smp_defconfig
@@ -79,7 +79,11 @@ CONFIG_SATA_FSL=y
 CONFIG_SATA_SIL24=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
+CONFIG_FSL_PQ_MDIO=y
+CONFIG_FSL_XGMAC_MDIO=y
 CONFIG_E1000E=y
+CONFIG_VITESSE_PHY=y
+CONFIG_FIXED_PHY=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set

From bb344ca5b90df62b1a3b7a35c6a9d00b306a170d Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Wed, 17 Dec 2014 19:06:31 -0600
Subject: [PATCH 17/34] powerpc/mpc85xx: Add ranges to etsec2 nodes

Commit 746c9e9f92dd "of/base: Fix PowerPC address parsing hack" limited
the applicability of the workaround whereby a missing ranges is treated
as an empty ranges.  This workaround was hiding a bug in the etsec2
device tree nodes, which have children with reg, but did not have
ranges.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Reported-by: Alexander Graf <agraf@suse.de>
---
 arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi | 1 +
 arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi | 1 +
 arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi | 1 +
 3 files changed, 3 insertions(+)

diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi
index 1382fec9e8c5f8..7fcb1ac0f2325f 100644
--- a/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi
@@ -50,6 +50,7 @@ ethernet@b0000 {
 	fsl,num_tx_queues = <0x8>;
 	fsl,magic-packet;
 	local-mac-address = [ 00 00 00 00 00 00 ];
+	ranges;
 
 	queue-group@b0000 {
 		#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi
index 221cd2ea5b3124..9f25427c152785 100644
--- a/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi
@@ -50,6 +50,7 @@ ethernet@b1000 {
 	fsl,num_tx_queues = <0x8>;
 	fsl,magic-packet;
 	local-mac-address = [ 00 00 00 00 00 00 ];
+	ranges;
 
 	queue-group@b1000 {
 		#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi
index 61456c317609ce..cd7c318ab131af 100644
--- a/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi
@@ -49,6 +49,7 @@ ethernet@b2000 {
 	fsl,num_tx_queues = <0x8>;
 	fsl,magic-packet;
 	local-mac-address = [ 00 00 00 00 00 00 ];
+	ranges;
 
 	queue-group@b2000 {
 		#address-cells = <1>;

From 2727ed54716e606673121d5863934512bd4a5eb8 Mon Sep 17 00:00:00 2001
From: Alessio Igor Bogani <alessio.bogani@elettra.eu>
Date: Thu, 11 Dec 2014 09:56:45 +0100
Subject: [PATCH 18/34] powerpc/85xx: Add support for Emerson/Artesyn MVME2500.

Add support for the Artesyn MVME2500 Single Board Computer.

The MVME2500 is a 6U form factor VME64 computer with:

	- A single Freescale QorIQ P2010 CPU
	- 1 GB of DDR3 onboard memory
	- Three Gigabit Ethernets
	- Five 16550 compatible UARTS
	- One USB 2.0 port, one SHDC socket and one SATA connector
	- One PCI/PCI eXpress Mezzanine Card (PMC/XMC) Slot
	- MultiProcessor Interrupt Controller (MPIC)
	- A DS1375T Real Time Clock (RTC) and 512 KB of Non-Volatile Memory
	- Two 64 KB EEPROMs
	- U-Boot in 16 SPI Flash

This patch is based on linux-3.18 and has been boot tested.

Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/dts/mvme2500.dts     | 280 +++++++++++++++++++++++++
 arch/powerpc/configs/mpc85xx_defconfig |  16 +-
 arch/powerpc/platforms/85xx/Kconfig    |   6 +
 arch/powerpc/platforms/85xx/Makefile   |   1 +
 arch/powerpc/platforms/85xx/mvme2500.c |  74 +++++++
 5 files changed, 374 insertions(+), 3 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/mvme2500.dts
 create mode 100644 arch/powerpc/platforms/85xx/mvme2500.c

diff --git a/arch/powerpc/boot/dts/mvme2500.dts b/arch/powerpc/boot/dts/mvme2500.dts
new file mode 100644
index 00000000000000..67714cf0f745a3
--- /dev/null
+++ b/arch/powerpc/boot/dts/mvme2500.dts
@@ -0,0 +1,280 @@
+/*
+ * Device tree source for the Emerson/Artesyn MVME2500
+ *
+ * Copyright 2014 Elettra-Sincrotrone Trieste S.C.p.A.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Based on: P2020 DS Device Tree Source
+ * Copyright 2009 Freescale Semiconductor Inc.
+ */
+
+/include/ "fsl/p2020si-pre.dtsi"
+
+/ {
+	model = "MVME2500";
+	compatible = "artesyn,MVME2500";
+
+	aliases {
+		serial2 = &serial2;
+		serial3 = &serial3;
+		serial4 = &serial4;
+		serial5 = &serial5;
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0 0xffe00000 0x100000>;
+
+		i2c@3000 {
+			hwmon@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+				interrupts = <8 1 0 0>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+
+			eeprom@52 {
+				compatible = "atmel,24c512";
+				reg = <0x52>;
+			};
+
+			eeprom@53 {
+				compatible = "atmel,24c512";
+				reg = <0x53>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+
+		};
+
+		spi0: spi@7000 {
+			fsl,espi-num-chipselects = <2>;
+
+			flash@0 {
+				compatible = "atmel,at25df641";
+				reg = <0>;
+				spi-max-frequency = <10000000>;
+			};
+			flash@1 {
+				compatible = "atmel,at25df641";
+				reg = <1>;
+				spi-max-frequency = <10000000>;
+			};
+		};
+
+		usb@22000 {
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet@24000 {
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@24520 {
+			phy1: ethernet-phy@1 {
+				compatible = "brcm,bcm54616S";
+				interrupts = <6 1 0 0>;
+				reg = <0x1>;
+			};
+
+			phy2: ethernet-phy@2 {
+				compatible = "brcm,bcm54616S";
+				interrupts = <6 1 0 0>;
+				reg = <0x2>;
+			};
+
+			phy3: ethernet-phy@3 {
+				compatible = "brcm,bcm54616S";
+				interrupts = <5 1 0 0>;
+				reg = <0x3>;
+			};
+
+			phy7: ethernet-phy@7 {
+				compatible = "brcm,bcm54616S";
+				interrupts = <7 1 0 0>;
+				reg = <0x7>;
+			};
+
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet1: ethernet@25000 {
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy7>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@25520 {
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet2: ethernet@26000 {
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy3>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@26520 {
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		ranges = <0x0 0x0 0x0 0xfff00000 0x00080000
+			  0x1 0x0 0x0 0xffc40000 0x00010000
+			  0x2 0x0 0x0 0xffc50000 0x00010000
+			  0x3 0x0 0x0 0xffc60000 0x00010000
+			  0x4 0x0 0x0 0xffc70000 0x00010000
+			  0x6 0x0 0x0 0xffc80000 0x00010000
+			  0x5 0x0 0x0 0xffdf0000 0x00008000>;
+
+		serial2: serial@1,0 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x1 0x0 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <11 2 0 0>;
+		};
+
+		serial3: serial@2,0 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x2 0x0 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <1 2 0 0>;
+		};
+
+		serial4: serial@3,0 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x3 0x0 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <2 2 0 0>;
+		};
+
+		serial5: serial@4,0 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4 0x0 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <3 2 0 0>;
+		};
+
+		mram@0,0 {
+			compatible = "everspin,mram", "mtd-ram";
+			reg = <0x0 0x0 0x80000>;
+			bank-width = <2>;
+		};
+
+		board-control@5,0 {
+			compatible = "artesyn,mvme2500-fpga";
+			reg = <0x5 0x0 0x01000>;
+		};
+
+		cpld@6,0 {
+			compatible = "artesyn,mvme2500-cpld";
+			reg = <0x6 0x0 0x10000>;
+			interrupts = <9 1 0 0>;
+		};
+	};
+
+	pci0: pcie@ffe08000 {
+		reg = <0 0xffe08000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+
+	pci1: pcie@ffe09000 {
+		reg = <0 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+
+	};
+
+	pci2: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+};
+
+/include/ "fsl/p2020si-post.dtsi"
+
+/ {
+	soc@ffe00000 {
+		serial@4600 {
+			status = "disabled";
+		};
+
+		i2c@3100 {
+			status = "disabled";
+		};
+
+		sdhc@2e000 {
+			compatible = "fsl,p2020-esdhc", "fsl,esdhc";
+			non-removable;
+		};
+
+	};
+
+};
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index cfae862d634742..8535c343dd577e 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -42,6 +42,7 @@ CONFIG_TQM8548=y
 CONFIG_TQM8555=y
 CONFIG_TQM8560=y
 CONFIG_SBC8548=y
+CONFIG_MVME2500=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
 CONFIG_HIGHMEM=y
@@ -49,6 +50,8 @@ CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
 CONFIG_FORCE_MAX_ZONEORDER=12
 CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+# CONFIG_PCIEASPM is not set
 CONFIG_PCI_MSI=y
 CONFIG_RAPIDIO=y
 CONFIG_NET=y
@@ -85,10 +88,14 @@ CONFIG_FTL=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_PLATRAM=y
+CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
@@ -120,6 +127,7 @@ CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_CICADA_PHY=y
 CONFIG_VITESSE_PHY=y
+CONFIG_BROADCOM_PHY=y
 CONFIG_FIXED_PHY=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
@@ -128,8 +136,8 @@ CONFIG_INPUT_FF_MEMLESS=m
 CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=6
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
@@ -142,7 +150,8 @@ CONFIG_SPI=y
 CONFIG_SPI_FSL_SPI=y
 CONFIG_SPI_FSL_ESPI=y
 CONFIG_GPIO_MPC8XXX=y
-# CONFIG_HWMON is not set
+CONFIG_HWMON=m
+CONFIG_SENSORS_LM90=m
 CONFIG_FB=y
 CONFIG_FB_FSL_DIU=y
 # CONFIG_VGA_CONSOLE is not set
@@ -185,6 +194,7 @@ CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_OF_ESDHC=y
 CONFIG_EDAC=y
 CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_MPC85XX=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_DS1374=y
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index f22635a71d0117..2fb4b24368a6e6 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -241,6 +241,12 @@ config SGY_CTS1000
 	help
 	  Enable this to support functionality in Servergy's CTS-1000 systems.
 
+config MVME2500
+	bool "Artesyn MVME2500"
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for the Emerson/Artesyn MVME2500 board.
+
 endif # PPC32
 
 config PPC_QEMU_E500
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 73032604662556..1fe7fb95175a50 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -31,3 +31,4 @@ obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o
 obj-$(CONFIG_GE_IMP3A)	  += ge_imp3a.o
 obj-$(CONFIG_PPC_QEMU_E500) += qemu_e500.o
 obj-$(CONFIG_SGY_CTS1000) += sgy_cts1000.o
+obj-$(CONFIG_MVME2500)	  += mvme2500.o
diff --git a/arch/powerpc/platforms/85xx/mvme2500.c b/arch/powerpc/platforms/85xx/mvme2500.c
new file mode 100644
index 00000000000000..1233050560ae75
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/mvme2500.c
@@ -0,0 +1,74 @@
+/*
+ * Board setup routines for the Emerson/Artesyn MVME2500
+ *
+ * Copyright 2014 Elettra-Sincrotrone Trieste S.C.p.A.
+ *
+ * Based on earlier code by:
+ *
+ *	Xianghua Xiao (x.xiao@freescale.com)
+ *	Tom Armistead (tom.armistead@emerson.com)
+ *	Copyright 2012 Emerson
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Author Alessio Igor Bogani <alessio.bogani@elettra.eu>
+ *
+ */
+
+#include <linux/pci.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include "mpc85xx.h"
+
+void __init mvme2500_pic_init(void)
+{
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+		  MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU,
+		0, 256, " OpenPIC  ");
+	BUG_ON(mpic == NULL);
+	mpic_init(mpic);
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init mvme2500_setup_arch(void)
+{
+	if (ppc_md.progress)
+		ppc_md.progress("mvme2500_setup_arch()", 0);
+	fsl_pci_assign_primary();
+	pr_info("MVME2500 board from Artesyn\n");
+}
+
+machine_arch_initcall(mvme2500, mpc85xx_common_publish_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mvme2500_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "artesyn,MVME2500");
+}
+
+define_machine(mvme2500) {
+	.name			= "MVME2500",
+	.probe			= mvme2500_probe,
+	.setup_arch		= mvme2500_setup_arch,
+	.init_IRQ		= mvme2500_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};

From c3e09b3a90850b299aa805c32945163e5101ddcd Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Wed, 10 Dec 2014 18:56:22 -0600
Subject: [PATCH 19/34] memory/fsl-corenet-cf: Add t1040 support

T1040 has a different version of corenet-cf, despite being incorrectly
labelled with a fsl,corenet2-cf compatible.  The t1040 version of
corenet-cf has a version register that can be read to distinguish.  The
t4240/b4860 version officially does not, but testing shows that it does
and has a different value, so use that.  If somehow this ends up not
being reliable and we treat a t4240/b4860 as a t1040 (the reverse
should not happen, as t1040's version register is official), currently
the worst that should happen is writing to reserved bits to enable
events that don't exist.

The changes to the t1040 version of corenet-cf that this driver cares
about are the addition of two new error events.  There are also changes
to the format of cecar2, which is printed, but not interpreted, by this
driver.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 drivers/memory/fsl-corenet-cf.c | 36 +++++++++++++++++++++++++++++++--
 1 file changed, 34 insertions(+), 2 deletions(-)

diff --git a/drivers/memory/fsl-corenet-cf.c b/drivers/memory/fsl-corenet-cf.c
index fc7ab5a3561e70..d708ded5457bb8 100644
--- a/drivers/memory/fsl-corenet-cf.c
+++ b/drivers/memory/fsl-corenet-cf.c
@@ -27,18 +27,29 @@ enum ccf_version {
 struct ccf_info {
 	enum ccf_version version;
 	int err_reg_offs;
+	bool has_brr;
 };
 
 static const struct ccf_info ccf1_info = {
 	.version = CCF1,
 	.err_reg_offs = 0xa00,
+	.has_brr = false,
 };
 
 static const struct ccf_info ccf2_info = {
 	.version = CCF2,
 	.err_reg_offs = 0xe40,
+	.has_brr = true,
 };
 
+/*
+ * This register is present but not documented, with different values for
+ * IP_ID, on other chips with fsl,corenet2-cf such as t4240 and b4860.
+ */
+#define CCF_BRR			0xbf8
+#define CCF_BRR_IPID		0xffff0000
+#define CCF_BRR_IPID_T1040	0x09310000
+
 static const struct of_device_id ccf_matches[] = {
 	{
 		.compatible = "fsl,corenet1-cf",
@@ -66,6 +77,8 @@ struct ccf_err_regs {
 /* LAE/CV also valid for errdis and errinten */
 #define ERRDET_LAE		(1 << 0)  /* Local Access Error */
 #define ERRDET_CV		(1 << 1)  /* Coherency Violation */
+#define ERRDET_UTID		(1 << 2)  /* Unavailable Target ID (t1040) */
+#define ERRDET_MCST		(1 << 3)  /* Multicast Stash (t1040) */
 #define ERRDET_CTYPE_SHIFT	26	  /* Capture Type (ccf2 only) */
 #define ERRDET_CTYPE_MASK	(0x1f << ERRDET_CTYPE_SHIFT)
 #define ERRDET_CAP		(1 << 31) /* Capture Valid (ccf2 only) */
@@ -84,6 +97,7 @@ struct ccf_private {
 	struct device *dev;
 	void __iomem *regs;
 	struct ccf_err_regs __iomem *err_regs;
+	bool t1040;
 };
 
 static irqreturn_t ccf_irq(int irq, void *dev_id)
@@ -142,6 +156,12 @@ static irqreturn_t ccf_irq(int irq, void *dev_id)
 	if (errdet & ERRDET_CV)
 		dev_crit(ccf->dev, "Coherency Violation\n");
 
+	if (errdet & ERRDET_UTID)
+		dev_crit(ccf->dev, "Unavailable Target ID\n");
+
+	if (errdet & ERRDET_MCST)
+		dev_crit(ccf->dev, "Multicast Stash\n");
+
 	if (cap_valid) {
 		dev_crit(ccf->dev, "address 0x%09llx, src id 0x%x\n",
 			 addr, src_id);
@@ -157,6 +177,7 @@ static int ccf_probe(struct platform_device *pdev)
 	struct ccf_private *ccf;
 	struct resource *r;
 	const struct of_device_id *match;
+	u32 errinten;
 	int ret, irq;
 
 	match = of_match_device(ccf_matches, &pdev->dev);
@@ -183,6 +204,13 @@ static int ccf_probe(struct platform_device *pdev)
 	ccf->info = match->data;
 	ccf->err_regs = ccf->regs + ccf->info->err_reg_offs;
 
+	if (ccf->info->has_brr) {
+		u32 brr = ioread32be(ccf->regs + CCF_BRR);
+
+		if ((brr & CCF_BRR_IPID) == CCF_BRR_IPID_T1040)
+			ccf->t1040 = true;
+	}
+
 	dev_set_drvdata(&pdev->dev, ccf);
 
 	irq = platform_get_irq(pdev, 0);
@@ -197,15 +225,19 @@ static int ccf_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	errinten = ERRDET_LAE | ERRDET_CV;
+	if (ccf->t1040)
+		errinten |= ERRDET_UTID | ERRDET_MCST;
+
 	switch (ccf->info->version) {
 	case CCF1:
 		/* On CCF1 this register enables rather than disables. */
-		iowrite32be(ERRDET_LAE | ERRDET_CV, &ccf->err_regs->errdis);
+		iowrite32be(errinten, &ccf->err_regs->errdis);
 		break;
 
 	case CCF2:
 		iowrite32be(0, &ccf->err_regs->errdis);
-		iowrite32be(ERRDET_LAE | ERRDET_CV, &ccf->err_regs->errinten);
+		iowrite32be(errinten, &ccf->err_regs->errinten);
 		break;
 	}
 

From 1ee9df499b270f259adc8df9cca396d5ef6e9e46 Mon Sep 17 00:00:00 2001
From: Emil Medve <Emilian.Medve@freescale.com>
Date: Mon, 8 Dec 2014 04:29:16 -0600
Subject: [PATCH 20/34] dt/bindings: b/qman: Fix the alloc-ranges in the
 example(s)

'ranges' are specified as <base size> not as <start end>

Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 Documentation/devicetree/bindings/soc/fsl/bman.txt | 2 +-
 Documentation/devicetree/bindings/soc/fsl/qman.txt | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/soc/fsl/bman.txt b/Documentation/devicetree/bindings/soc/fsl/bman.txt
index 9f80bf8709acec..ee03ef2e265c2e 100644
--- a/Documentation/devicetree/bindings/soc/fsl/bman.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/bman.txt
@@ -96,7 +96,7 @@ The example below shows a BMan FBPR dynamic allocation memory node
 
 		bman_fbpr: bman-fbpr {
 			compatible = "fsl,bman-fbpr";
-			alloc-ranges = <0 0 0xf 0xffffffff>;
+			alloc-ranges = <0 0 0x10 0>;
 			size = <0 0x1000000>;
 			alignment = <0 0x1000000>;
 		};
diff --git a/Documentation/devicetree/bindings/soc/fsl/qman.txt b/Documentation/devicetree/bindings/soc/fsl/qman.txt
index 063e3a0b9d045e..f3da91ef4287a7 100644
--- a/Documentation/devicetree/bindings/soc/fsl/qman.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/qman.txt
@@ -113,13 +113,13 @@ The example below shows a QMan FQD and a PFDR dynamic allocation memory nodes
 
 		qman_fqd: qman-fqd {
 			compatible = "fsl,qman-fqd";
-			alloc-ranges = <0 0 0xf 0xffffffff>;
+			alloc-ranges = <0 0 0x10 0>;
 			size = <0 0x400000>;
 			alignment = <0 0x400000>;
 		};
 		qman_pfdr: qman-pfdr {
 			compatible = "fsl,qman-pfdr";
-			alloc-ranges = <0 0 0xf 0xffffffff>;
+			alloc-ranges = <0 0 0x10 0>;
 			size = <0 0x2000000>;
 			alignment = <0 0x2000000>;
 		};

From 7af98c7c4dffaf5b0a082fa9c42785d7807e6235 Mon Sep 17 00:00:00 2001
From: Emil Medve <Emilian.Medve@freescale.com>
Date: Mon, 8 Dec 2014 04:29:17 -0600
Subject: [PATCH 21/34] dt/bindings: b/qman: Add phandle to the portals

This supports SoC(s) with multiple B/QMan instances

Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 Documentation/devicetree/bindings/soc/fsl/bman.txt | 10 ++++++++++
 Documentation/devicetree/bindings/soc/fsl/qman.txt | 10 ++++++++++
 2 files changed, 20 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/fsl/bman.txt b/Documentation/devicetree/bindings/soc/fsl/bman.txt
index ee03ef2e265c2e..47ac834414d848 100644
--- a/Documentation/devicetree/bindings/soc/fsl/bman.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/bman.txt
@@ -36,6 +36,11 @@ are located at offsets 0xbf8 and 0xbfc
 	Value type:	<prop-encoded-array>
 	Definition:	Standard property. The error interrupt
 
+- fsl,bman-portals
+	Usage:		Required
+	Value type:	<phandle>
+	Definition:	Phandle to this BMan instance's portals
+
 - fsl,liodn
 	Usage:		See pamu.txt
 	Value type:	<prop-encoded-array>
@@ -104,6 +109,10 @@ The example below shows a BMan FBPR dynamic allocation memory node
 
 The example below shows a (P4080) BMan CCSR-space node
 
+	bportals: bman-portals@ff4000000 {
+		...
+	};
+
 	crypto@300000 {
 		...
 		fsl,bman = <&bman, 2>;
@@ -115,6 +124,7 @@ The example below shows a (P4080) BMan CCSR-space node
 		reg = <0x31a000 0x1000>;
 		interrupts = <16 2 1 2>;
 		fsl,liodn = <0x17>;
+		fsl,bman-portals = <&bportals>;
 		memory-region = <&bman_fbpr>;
 	};
 
diff --git a/Documentation/devicetree/bindings/soc/fsl/qman.txt b/Documentation/devicetree/bindings/soc/fsl/qman.txt
index f3da91ef4287a7..556ebb8be75d9c 100644
--- a/Documentation/devicetree/bindings/soc/fsl/qman.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/qman.txt
@@ -38,6 +38,11 @@ are located at offsets 0xbf8 and 0xbfc
 	Value type:	<prop-encoded-array>
 	Definition:	Standard property. The error interrupt
 
+- fsl,qman-portals
+	Usage:		Required
+	Value type:	<phandle>
+	Definition:	Phandle to this QMan instance's portals
+
 - fsl,liodn
 	Usage:		See pamu.txt
 	Value type:	<prop-encoded-array>
@@ -127,6 +132,10 @@ The example below shows a QMan FQD and a PFDR dynamic allocation memory nodes
 
 The example below shows a (P4080) QMan CCSR-space node
 
+	qportals: qman-portals@ff4200000 {
+		...
+	};
+
 	clockgen: global-utilities@e1000 {
 		...
 		sysclk: sysclk {
@@ -154,6 +163,7 @@ The example below shows a (P4080) QMan CCSR-space node
 		reg = <0x318000 0x1000>;
 		interrupts = <16 2 1 3>
 		fsl,liodn = <0x16>;
+		fsl,qman-portals = <&qportals>;
 		memory-region = <&qman_fqd &qman_pfdr>;
 		clocks = <&platform_pll 1>;
 	};

From 39b55b53b924cbee8cb6efd54ab4ccc9158eb8b5 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Mon, 8 Dec 2014 04:29:18 -0600
Subject: [PATCH 22/34] powerpc/mpc85xx: Create dts components for the FSL
 QorIQ DPAA BMan

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Geoff Thorpe <Geoff.Thorpe@freescale.com>
Signed-off-by: Hai-Ying Wang <Haiying.Wang@freescale.com>
[Emil Medve: Sync with the upstream binding]
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 .../boot/dts/fsl/qoriq-bman1-portals.dtsi     | 90 +++++++++++++++++++
 arch/powerpc/boot/dts/fsl/qoriq-bman1.dtsi    | 41 +++++++++
 2 files changed, 131 insertions(+)
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-bman1-portals.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-bman1.dtsi

diff --git a/arch/powerpc/boot/dts/fsl/qoriq-bman1-portals.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-bman1-portals.dtsi
new file mode 100644
index 00000000000000..5022432ebaa9b2
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-bman1-portals.dtsi
@@ -0,0 +1,90 @@
+/*
+ * QorIQ BMan Portal device tree stub for 10 portals
+ *
+ * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&bportals {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "simple-bus";
+
+	bman-portal@0 {
+		compatible = "fsl,bman-portal";
+		reg = <0x0 0x4000>, <0x100000 0x1000>;
+		interrupts = <105 2 0 0>;
+	};
+	bman-portal@4000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x4000 0x4000>, <0x101000 0x1000>;
+		interrupts = <107 2 0 0>;
+	};
+	bman-portal@8000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x8000 0x4000>, <0x102000 0x1000>;
+		interrupts = <109 2 0 0>;
+	};
+	bman-portal@c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xc000 0x4000>, <0x103000 0x1000>;
+		interrupts = <111 2 0 0>;
+	};
+	bman-portal@10000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x10000 0x4000>, <0x104000 0x1000>;
+		interrupts = <113 2 0 0>;
+	};
+	bman-portal@14000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x14000 0x4000>, <0x105000 0x1000>;
+		interrupts = <115 2 0 0>;
+	};
+	bman-portal@18000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x18000 0x4000>, <0x106000 0x1000>;
+		interrupts = <117 2 0 0>;
+	};
+	bman-portal@1c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x1c000 0x4000>, <0x107000 0x1000>;
+		interrupts = <119 2 0 0>;
+	};
+	bman-portal@20000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x20000 0x4000>, <0x108000 0x1000>;
+		interrupts = <121 2 0 0>;
+	};
+	bman-portal@24000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x24000 0x4000>, <0x109000 0x1000>;
+		interrupts = <123 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-bman1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-bman1.dtsi
new file mode 100644
index 00000000000000..3b5e3504acb7aa
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-bman1.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ BMan device tree stub [ controller @ offset 0x31a000 ]
+ *
+ * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+bman: bman@31a000 {
+	compatible = "fsl,bman";
+	reg = <0x31a000 0x1000>;
+	interrupts = <16 2 1 2>;
+	fsl,bman-portals = <&bportals>;
+	memory-region = <&bman_fbpr>;
+};

From de58824fc41ff0c266f4d8926271007fd121d9b4 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Mon, 8 Dec 2014 04:29:19 -0600
Subject: [PATCH 23/34] powerpc/mpc85xx: Create dts components for the FSL
 QorIQ DPAA QMan

Change-Id: I16e63db731e55a3d60d4e147573c1af8718082d3
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Geoff Thorpe <Geoff.Thorpe@freescale.com>
Signed-off-by: Hai-Ying Wang <Haiying.Wang@freescale.com>
[Emil Medve: Sync with the upstream binding]
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 .../boot/dts/fsl/qoriq-qman1-portals.dtsi     | 101 ++++++++++++++++++
 arch/powerpc/boot/dts/fsl/qoriq-qman1.dtsi    |  41 +++++++
 arch/powerpc/boot/dts/fsl/qoriq-qman3.dtsi    |  41 +++++++
 3 files changed, 183 insertions(+)
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-qman1-portals.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-qman1.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-qman3.dtsi

diff --git a/arch/powerpc/boot/dts/fsl/qoriq-qman1-portals.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-qman1-portals.dtsi
new file mode 100644
index 00000000000000..05d51acafa67a9
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-qman1-portals.dtsi
@@ -0,0 +1,101 @@
+/*
+ * QorIQ QMan Portal device tree stub for 10 portals & 15 pool channels
+ *
+ * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&qportals {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "simple-bus";
+
+	qportal0: qman-portal@0 {
+		compatible = "fsl,qman-portal";
+		reg = <0x0 0x4000>, <0x100000 0x1000>;
+		interrupts = <104 2 0 0>;
+		fsl,qman-channel-id = <0x0>;
+	};
+	qportal1: qman-portal@4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4000 0x4000>, <0x101000 0x1000>;
+		interrupts = <106 2 0 0>;
+		fsl,qman-channel-id = <1>;
+	};
+	qportal2: qman-portal@8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x8000 0x4000>, <0x102000 0x1000>;
+		interrupts = <108 2 0 0>;
+		fsl,qman-channel-id = <2>;
+	};
+	qportal3: qman-portal@c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xc000 0x4000>, <0x103000 0x1000>;
+		interrupts = <110 2 0 0>;
+		fsl,qman-channel-id = <3>;
+	};
+	qportal4: qman-portal@10000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x10000 0x4000>, <0x104000 0x1000>;
+		interrupts = <112 2 0 0>;
+		fsl,qman-channel-id = <4>;
+	};
+	qportal5: qman-portal@14000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x14000 0x4000>, <0x105000 0x1000>;
+		interrupts = <114 2 0 0>;
+		fsl,qman-channel-id = <5>;
+	};
+	qportal6: qman-portal@18000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x18000 0x4000>, <0x106000 0x1000>;
+		interrupts = <116 2 0 0>;
+		fsl,qman-channel-id = <6>;
+	};
+
+	qportal7: qman-portal@1c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x1c000 0x4000>, <0x107000 0x1000>;
+		interrupts = <118 2 0 0>;
+		fsl,qman-channel-id = <7>;
+	};
+	qportal8: qman-portal@20000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x20000 0x4000>, <0x108000 0x1000>;
+		interrupts = <120 2 0 0>;
+		fsl,qman-channel-id = <8>;
+	};
+	qportal9: qman-portal@24000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x24000 0x4000>, <0x109000 0x1000>;
+		interrupts = <122 2 0 0>;
+		fsl,qman-channel-id = <9>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-qman1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-qman1.dtsi
new file mode 100644
index 00000000000000..0695778c43867a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-qman1.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ QMan device tree stub [ controller @ offset 0x318000 ]
+ *
+ * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+qman: qman@318000 {
+	compatible = "fsl,qman";
+	reg = <0x318000 0x1000>;
+	interrupts = <16 2 1 3>;
+	fsl,qman-portals = <&qportals>;
+	memory-region = <&qman_fqd &qman_pfdr>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-qman3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-qman3.dtsi
new file mode 100644
index 00000000000000..b379abd1439d86
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-qman3.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ QMan rev3 device tree stub [ controller @ offset 0x318000 ]
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+qman: qman@318000 {
+	compatible = "fsl,qman";
+	reg = <0x318000 0x2000>;
+	interrupts = <16 2 1 3>;
+	fsl,qman-portals = <&qportals>;
+	memory-region = <&qman_fqd &qman_pfdr>;
+};

From fd5f4914b6053fc91ef2c278c54254a660427bf1 Mon Sep 17 00:00:00 2001
From: Alessio Igor Bogani <alessio.bogani@elettra.eu>
Date: Thu, 4 Dec 2014 10:23:11 +0100
Subject: [PATCH 24/34] powerpc: dts: pq3/85xx: Fix GPIO address

Fix the GPIO address in the device tree to match the documented location.

Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi
index 72a3ef5945c1c2..a1b48546b02d12 100644
--- a/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi
@@ -1,5 +1,5 @@
 /*
- * PQ3 GPIO device tree stub [ controller @ offset 0xf000 ]
+ * PQ3 GPIO device tree stub [ controller @ offset 0xfc00 ]
  *
  * Copyright 2011 Freescale Semiconductor Inc.
  *
@@ -32,10 +32,10 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-gpio-controller@f000 {
+gpio-controller@fc00 {
 	#gpio-cells = <2>;
 	compatible = "fsl,pq3-gpio";
-	reg = <0xf000 0x100>;
+	reg = <0xfc00 0x100>;
 	interrupts = <47 0x2 0 0>;
 	gpio-controller;
 };

From 8ac6e995ac17f33a5cc6796c5069488eb9f4abd7 Mon Sep 17 00:00:00 2001
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Sat, 22 Nov 2014 16:18:20 +0100
Subject: [PATCH 25/34] PowerPC-83xx: Deletion of an unnecessary check before
 the function call "of_node_put"

The of_node_put() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/platforms/83xx/usb.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c
index 1ad748bb39b4b5..5c31d8292d3bb8 100644
--- a/arch/powerpc/platforms/83xx/usb.c
+++ b/arch/powerpc/platforms/83xx/usb.c
@@ -162,8 +162,7 @@ int mpc831x_usb_cfg(void)
 
 	iounmap(immap);
 
-	if (immr_node)
-		of_node_put(immr_node);
+	of_node_put(immr_node);
 
 	/* Map USB SOC space */
 	ret = of_address_to_resource(np, 0, &res);

From 5db431285d832156852d6f0013089b5d2305a28d Mon Sep 17 00:00:00 2001
From: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Date: Sat, 26 Jul 2014 23:26:51 +0200
Subject: [PATCH 26/34] powerpc/qe: Use strlcpy()

Replace strcpy and strncpy with strlcpy to avoid strings that are too
big, or lack null termination.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
[scottwood@freescale.com: cleaned up commit message]
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/sysdev/qe_lib/qe.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 1f29cee8da7b0a..c2518cdb7ddb6e 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -497,7 +497,7 @@ int qe_upload_firmware(const struct qe_firmware *firmware)
 	 * saved microcode information and put in the new.
 	 */
 	memset(&qe_firmware_info, 0, sizeof(qe_firmware_info));
-	strcpy(qe_firmware_info.id, firmware->id);
+	strlcpy(qe_firmware_info.id, firmware->id, sizeof(qe_firmware_info.id));
 	qe_firmware_info.extended_modes = firmware->extended_modes;
 	memcpy(qe_firmware_info.vtraps, firmware->vtraps,
 		sizeof(firmware->vtraps));
@@ -583,8 +583,8 @@ struct qe_firmware_info *qe_get_firmware_info(void)
 	/* Copy the data into qe_firmware_info*/
 	sprop = of_get_property(fw, "id", NULL);
 	if (sprop)
-		strncpy(qe_firmware_info.id, sprop,
-			sizeof(qe_firmware_info.id) - 1);
+		strlcpy(qe_firmware_info.id, sprop,
+			sizeof(qe_firmware_info.id));
 
 	prop = of_find_property(fw, "extended-modes", NULL);
 	if (prop && (prop->length == sizeof(u64))) {

From 0d7d9b3a456aa8670cd9552f69529d57716f3122 Mon Sep 17 00:00:00 2001
From: Alexandru-Cezar Sardan <alexandru.sardan@freescale.com>
Date: Thu, 26 Jun 2014 11:58:58 +0300
Subject: [PATCH 27/34] perf/powerpc: reset event hw state when adding it to
 the PMU

When adding an event to the PMU with PERF_EF_START the STOPPED and UPTODATE
flags need to be cleared in the hw.event status variable because they are
preventing the update of the event count on overflow interrupt.

Signed-off-by: Alexandru-Cezar Sardan <alexandru.sardan@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/perf/core-fsl-emb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/perf/core-fsl-emb.c b/arch/powerpc/perf/core-fsl-emb.c
index e9fe904b653804..5d747b4cb8ee18 100644
--- a/arch/powerpc/perf/core-fsl-emb.c
+++ b/arch/powerpc/perf/core-fsl-emb.c
@@ -330,9 +330,11 @@ static int fsl_emb_pmu_add(struct perf_event *event, int flags)
 	}
 	local64_set(&event->hw.prev_count, val);
 
-	if (!(flags & PERF_EF_START)) {
+	if (unlikely(!(flags & PERF_EF_START))) {
 		event->hw.state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
 		val = 0;
+	} else {
+		event->hw.state &= ~(PERF_HES_STOPPED | PERF_HES_UPTODATE);
 	}
 
 	write_pmc(i, val);

From c9111a41dc27db8a9b6c0429f4965ddd8766f620 Mon Sep 17 00:00:00 2001
From: Brian Norris <computersforpeace@gmail.com>
Date: Wed, 30 Apr 2014 23:26:46 -0700
Subject: [PATCH 28/34] powerpc: defconfigs: add MTD_SPI_NOR (new dependency
 for M25P80)

These defconfigs contain the CONFIG_M25P80 symbol, which is now
dependent on the MTD_SPI_NOR symbol. Add CONFIG_MTD_SPI_NOR to satisfy
the new dependency.

At the same time, drop the now-nonexistent CONFIG_MTD_CHAR symbol.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/configs/corenet32_smp_defconfig | 1 +
 arch/powerpc/configs/corenet64_smp_defconfig | 1 +
 arch/powerpc/configs/mpc85xx_smp_defconfig   | 1 +
 3 files changed, 3 insertions(+)

diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig
index 4d0771aad9aa11..51866f17068457 100644
--- a/arch/powerpc/configs/corenet32_smp_defconfig
+++ b/arch/powerpc/configs/corenet32_smp_defconfig
@@ -75,6 +75,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig
index 88b475185611ae..d6c0c819895288 100644
--- a/arch/powerpc/configs/corenet64_smp_defconfig
+++ b/arch/powerpc/configs/corenet64_smp_defconfig
@@ -69,6 +69,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index 5b79adb64ce2e5..c45ad2e01b0ce1 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -91,6 +91,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y

From 0dc294f717d41bfbafc746a7a96a7bc0f114c20c Mon Sep 17 00:00:00 2001
From: Arseny Solokha <asolokha@kb.kras.ru>
Date: Fri, 30 Jan 2015 19:08:27 +0700
Subject: [PATCH 29/34] powerpc/mm: bail out early when flushing TLB page

MMU_NO_CONTEXT is conditionally defined as 0 or (unsigned int)-1. However,
in __flush_tlb_page() a corresponding variable is only tested for open
coded 0, which can cause NULL pointer dereference if `mm' argument was
legitimately passed as such.

Bail out early in case the first argument is NULL, thus eliminate confusion
between different values of MMU_NO_CONTEXT and avoid disabling and then
re-enabling preemption unnecessarily.

Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/mm/tlb_nohash.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index f38ea4df6a8556..ab0616b0e6c24e 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -284,8 +284,11 @@ void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
 	struct cpumask *cpu_mask;
 	unsigned int pid;
 
+	if (unlikely(!mm))
+		return;
+
 	preempt_disable();
-	pid = mm ? mm->context.id : 0;
+	pid = mm->context.id;
 	if (unlikely(pid == MMU_NO_CONTEXT))
 		goto bail;
 	cpu_mask = mm_cpumask(mm);

From 7f43e71e8c538356efd5b33a183e6d9ace4739a5 Mon Sep 17 00:00:00 2001
From: Joel Stanley <joel@jms.id.au>
Date: Fri, 30 Jan 2015 17:13:08 +1030
Subject: [PATCH 30/34] powerpc/powernv: Add OPAL soft-poweroff routine

Register a notifier for a OPAL message indicating that the machine
should prepare itself for a graceful power off.

OPAL will tell us if the power off is a reboot or shutdown, but for now
we perform the same orderly_poweroff action.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/asm/opal.h             |  2 +-
 arch/powerpc/platforms/powernv/Makefile     |  2 +-
 arch/powerpc/platforms/powernv/opal-power.c | 65 +++++++++++++++++++++
 3 files changed, 67 insertions(+), 2 deletions(-)
 create mode 100644 arch/powerpc/platforms/powernv/opal-power.c

diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 2baf8a5925ca96..9ee0a30a02cefc 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -304,7 +304,7 @@ enum OpalMessageType {
 					 */
 	OPAL_MSG_MEM_ERR,
 	OPAL_MSG_EPOW,
-	OPAL_MSG_SHUTDOWN,
+	OPAL_MSG_SHUTDOWN,		/* params[0] = 1 reboot, 0 shutdown */
 	OPAL_MSG_HMI_EVT,
 	OPAL_MSG_TYPE_MAX,
 };
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index f241accc053dc9..6f3c5d33c3af9f 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -1,7 +1,7 @@
 obj-y			+= setup.o opal-wrappers.o opal.o opal-async.o
 obj-y			+= opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o
 obj-y			+= rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o
-obj-y			+= opal-msglog.o opal-hmi.o
+obj-y			+= opal-msglog.o opal-hmi.o opal-power.o
 
 obj-$(CONFIG_SMP)	+= smp.o subcore.o subcore-asm.o
 obj-$(CONFIG_PCI)	+= pci.o pci-p5ioc2.o pci-ioda.o
diff --git a/arch/powerpc/platforms/powernv/opal-power.c b/arch/powerpc/platforms/powernv/opal-power.c
new file mode 100644
index 00000000000000..48bf5b080bcf35
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/opal-power.c
@@ -0,0 +1,65 @@
+/*
+ * PowerNV OPAL power control for graceful shutdown handling
+ *
+ * Copyright 2015 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/notifier.h>
+
+#include <asm/opal.h>
+#include <asm/machdep.h>
+
+#define SOFT_OFF 0x00
+#define SOFT_REBOOT 0x01
+
+static int opal_power_control_event(struct notifier_block *nb,
+				    unsigned long msg_type, void *msg)
+{
+	struct opal_msg *power_msg = msg;
+	uint64_t type;
+
+	type = be64_to_cpu(power_msg->params[0]);
+
+	switch (type) {
+	case SOFT_REBOOT:
+		/* Fall through. The service processor is responsible for
+		 * bringing the machine back up */
+	case SOFT_OFF:
+		pr_info("OPAL: poweroff requested\n");
+		orderly_poweroff(true);
+		break;
+	default:
+		pr_err("OPAL: power control type unexpected %016llx\n", type);
+	}
+
+	return 0;
+}
+
+static struct notifier_block opal_power_control_nb = {
+	.notifier_call	= opal_power_control_event,
+	.next		= NULL,
+	.priority	= 0,
+};
+
+static int __init opal_power_control_init(void)
+{
+	int ret;
+
+	ret = opal_message_notifier_register(OPAL_MSG_SHUTDOWN,
+					     &opal_power_control_nb);
+	if (ret) {
+		pr_err("%s: Can't register OPAL event notifier (%d)\n",
+				__func__, ret);
+		return ret;
+	}
+
+	return 0;
+}
+machine_subsys_initcall(powernv, opal_power_control_init);

From c2c896bee08e1461fc24f9bf7dd57e2c63f6db70 Mon Sep 17 00:00:00 2001
From: Arseny Solokha <asolokha@kb.kras.ru>
Date: Wed, 4 Feb 2015 13:18:02 +1100
Subject: [PATCH 31/34] powerpc/mm: Warn on flushing tlb page in kernel context

Function __flush_tlb_page() must only be called for user contexts, so
put in extra hardening to warn on calling it for kernel context.

Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/mm/tlb_nohash.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index ab0616b0e6c24e..cbd3d069897f61 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -284,7 +284,11 @@ void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
 	struct cpumask *cpu_mask;
 	unsigned int pid;
 
-	if (unlikely(!mm))
+	/*
+	 * This function as well as __local_flush_tlb_page() must only be called
+	 * for user contexts.
+	 */
+	if (unlikely(WARN_ON(!mm)))
 		return;
 
 	preempt_disable();

From b087e6190ddcd9ae4e8ff2c788d2b32f193e946b Mon Sep 17 00:00:00 2001
From: Ian Munsie <imunsie@au1.ibm.com>
Date: Wed, 4 Feb 2015 19:09:01 +1100
Subject: [PATCH 32/34] cxl: Export optional AFU configuration record in sysfs

An AFU may optionally contain one or more PCIe like configuration
records, which can be used to identify the AFU.

This patch adds support for exposing the raw config space and the
vendor, device and class code under sysfs. These will appear in a
subdirectory of the AFU device corresponding with the configuration
record number, e.g.

cat /sys/class/cxl/afu0.0/cr0/vendor
0x1014

cat /sys/class/cxl/afu0.0/cr0/device
0x4350

cat /sys/class/cxl/afu0.0/cr0/class
0x120000

hexdump -C /sys/class/cxl/afu0.0/cr0/config
00000000  14 10 50 43 00 00 00 00  06 00 00 12 00 00 00 00  |..PC............|
00000010  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00000100

These files behave in much the same way as the equivalent files for PCI
devices, with one exception being that the config file is currently
read-only and restricted to the root user. It is not necessarily
required to be this strict, but we currently do not have a compelling
use-case to make it writable and/or world-readable, so I erred on the
side of being restrictive.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 Documentation/ABI/testing/sysfs-class-cxl |  37 +++++
 drivers/misc/cxl/cxl.h                    |  13 ++
 drivers/misc/cxl/pci.c                    |  23 +++
 drivers/misc/cxl/sysfs.c                  | 179 ++++++++++++++++++++--
 4 files changed, 242 insertions(+), 10 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl
index 9ea01068a16c15..3680364b404885 100644
--- a/Documentation/ABI/testing/sysfs-class-cxl
+++ b/Documentation/ABI/testing/sysfs-class-cxl
@@ -81,6 +81,43 @@ Description:    read only
                 this this kernel supports.
 
 
+AFU configuration records (eg. /sys/class/cxl/afu0.0/cr0):
+
+An AFU may optionally export one or more PCIe like configuration records, known
+as AFU configuration records, which will show up here (if present).
+
+What:           /sys/class/cxl/<afu>/cr<config num>/vendor
+Date:           February 2015
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read only
+		Hexadecimal value of the vendor ID found in this AFU
+		configuration record.
+
+What:           /sys/class/cxl/<afu>/cr<config num>/device
+Date:           February 2015
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read only
+		Hexadecimal value of the device ID found in this AFU
+		configuration record.
+
+What:           /sys/class/cxl/<afu>/cr<config num>/vendor
+Date:           February 2015
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read only
+		Hexadecimal value of the class code found in this AFU
+		configuration record.
+
+What:           /sys/class/cxl/<afu>/cr<config num>/config
+Date:           February 2015
+Contact:        linuxppc-dev@lists.ozlabs.org
+Description:    read only
+		This binary file provides raw access to the AFU configuration
+		record. The format is expected to match the either the standard
+		or extended configuration space defined by the PCIe
+		specification.
+
+
+
 Master contexts (eg. /sys/class/cxl/afu0.0m)
 
 What:           /sys/class/cxl/<afu>m/mmio_size
diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h
index 6a6a487464c58e..a1cee4767ec6c5 100644
--- a/drivers/misc/cxl/cxl.h
+++ b/drivers/misc/cxl/cxl.h
@@ -382,6 +382,10 @@ struct cxl_afu {
 	int slice;
 	int modes_supported;
 	int current_mode;
+	int crs_num;
+	u64 crs_len;
+	u64 crs_offset;
+	struct list_head crs;
 	enum prefault_modes prefault_mode;
 	bool psa;
 	bool pp_psa;
@@ -551,6 +555,15 @@ static inline void __iomem *_cxl_p2n_addr(struct cxl_afu *afu, cxl_p2n_reg_t reg
 #define cxl_p2n_read(afu, reg) \
 	in_be64(_cxl_p2n_addr(afu, reg))
 
+
+#define cxl_afu_cr_read64(afu, cr, off) \
+	in_le64((afu)->afu_desc_mmio + (afu)->crs_offset + ((cr) * (afu)->crs_len) + (off))
+#define cxl_afu_cr_read32(afu, cr, off) \
+	in_le32((afu)->afu_desc_mmio + (afu)->crs_offset + ((cr) * (afu)->crs_len) + (off))
+u16 cxl_afu_cr_read16(struct cxl_afu *afu, int cr, u64 off);
+u8 cxl_afu_cr_read8(struct cxl_afu *afu, int cr, u64 off);
+
+
 struct cxl_calls {
 	void (*cxl_slbia)(struct mm_struct *mm);
 	struct module *owner;
diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index cb250673b5c634..2b2e1b80d75985 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -114,6 +114,24 @@
 #define   AFUD_EB_LEN(val)		EXTRACT_PPC_BITS(val, 8, 63)
 #define AFUD_READ_EB_OFF(afu)		AFUD_READ(afu, 0x48)
 
+u16 cxl_afu_cr_read16(struct cxl_afu *afu, int cr, u64 off)
+{
+	u64 aligned_off = off & ~0x3L;
+	u32 val;
+
+	val = cxl_afu_cr_read32(afu, cr, aligned_off);
+	return (val >> ((off & 0x2) * 8)) & 0xffff;
+}
+
+u8 cxl_afu_cr_read8(struct cxl_afu *afu, int cr, u64 off)
+{
+	u64 aligned_off = off & ~0x3L;
+	u32 val;
+
+	val = cxl_afu_cr_read32(afu, cr, aligned_off);
+	return (val >> ((off & 0x3) * 8)) & 0xff;
+}
+
 static DEFINE_PCI_DEVICE_TABLE(cxl_pci_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_IBM, 0x0477), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_IBM, 0x044b), },
@@ -556,6 +574,7 @@ static int cxl_read_afu_descriptor(struct cxl_afu *afu)
 	val = AFUD_READ_INFO(afu);
 	afu->pp_irqs = AFUD_NUM_INTS_PER_PROC(val);
 	afu->max_procs_virtualised = AFUD_NUM_PROCS(val);
+	afu->crs_num = AFUD_NUM_CRS(val);
 
 	if (AFUD_AFU_DIRECTED(val))
 		afu->modes_supported |= CXL_MODE_DIRECTED;
@@ -570,6 +589,10 @@ static int cxl_read_afu_descriptor(struct cxl_afu *afu)
 	if ((afu->pp_psa = AFUD_PPPSA_PP(val)))
 		afu->pp_offset = AFUD_READ_PPPSA_OFF(afu);
 
+	val = AFUD_READ_CR(afu);
+	afu->crs_len = AFUD_CR_LEN(val) * 256;
+	afu->crs_offset = AFUD_READ_CR_OFF(afu);
+
 	return 0;
 }
 
diff --git a/drivers/misc/cxl/sysfs.c b/drivers/misc/cxl/sysfs.c
index adf1f6d849131e..d0c38c7bc0c4bf 100644
--- a/drivers/misc/cxl/sysfs.c
+++ b/drivers/misc/cxl/sysfs.c
@@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/device.h>
 #include <linux/sysfs.h>
+#include <linux/pci_regs.h>
 
 #include "cxl.h"
 
@@ -367,8 +368,6 @@ static struct device_attribute afu_attrs[] = {
 	__ATTR(reset, S_IWUSR, NULL, reset_store_afu),
 };
 
-
-
 int cxl_sysfs_adapter_add(struct cxl *adapter)
 {
 	int i, rc;
@@ -391,31 +390,191 @@ void cxl_sysfs_adapter_remove(struct cxl *adapter)
 		device_remove_file(&adapter->dev, &adapter_attrs[i]);
 }
 
+struct afu_config_record {
+	struct kobject kobj;
+	struct bin_attribute config_attr;
+	struct list_head list;
+	int cr;
+	u16 device;
+	u16 vendor;
+	u32 class;
+};
+
+#define to_cr(obj) container_of(obj, struct afu_config_record, kobj)
+
+static ssize_t vendor_show(struct kobject *kobj,
+			   struct kobj_attribute *attr, char *buf)
+{
+	struct afu_config_record *cr = to_cr(kobj);
+
+	return scnprintf(buf, PAGE_SIZE, "0x%.4x\n", cr->vendor);
+}
+
+static ssize_t device_show(struct kobject *kobj,
+			   struct kobj_attribute *attr, char *buf)
+{
+	struct afu_config_record *cr = to_cr(kobj);
+
+	return scnprintf(buf, PAGE_SIZE, "0x%.4x\n", cr->device);
+}
+
+static ssize_t class_show(struct kobject *kobj,
+			  struct kobj_attribute *attr, char *buf)
+{
+	struct afu_config_record *cr = to_cr(kobj);
+
+	return scnprintf(buf, PAGE_SIZE, "0x%.6x\n", cr->class);
+}
+
+static ssize_t afu_read_config(struct file *filp, struct kobject *kobj,
+			       struct bin_attribute *bin_attr, char *buf,
+			       loff_t off, size_t count)
+{
+	struct afu_config_record *cr = to_cr(kobj);
+	struct cxl_afu *afu = to_cxl_afu(container_of(kobj->parent, struct device, kobj));
+
+	u64 i, j, val, size = afu->crs_len;
+
+	if (off > size)
+		return 0;
+	if (off + count > size)
+		count = size - off;
+
+	for (i = 0; i < count;) {
+		val = cxl_afu_cr_read64(afu, cr->cr, off & ~0x7);
+		for (j = off & 0x7; j < 8 && i < count; i++, j++, off++)
+			buf[i] = (val >> (j * 8)) & 0xff;
+	}
+
+	return count;
+}
+
+static struct kobj_attribute vendor_attribute =
+	__ATTR_RO(vendor);
+static struct kobj_attribute device_attribute =
+	__ATTR_RO(device);
+static struct kobj_attribute class_attribute =
+	__ATTR_RO(class);
+
+static struct attribute *afu_cr_attrs[] = {
+	&vendor_attribute.attr,
+	&device_attribute.attr,
+	&class_attribute.attr,
+	NULL,
+};
+
+static void release_afu_config_record(struct kobject *kobj)
+{
+	struct afu_config_record *cr = to_cr(kobj);
+
+	kfree(cr);
+}
+
+static struct kobj_type afu_config_record_type = {
+	.sysfs_ops = &kobj_sysfs_ops,
+	.release = release_afu_config_record,
+	.default_attrs = afu_cr_attrs,
+};
+
+static struct afu_config_record *cxl_sysfs_afu_new_cr(struct cxl_afu *afu, int cr_idx)
+{
+	struct afu_config_record *cr;
+	int rc;
+
+	cr = kzalloc(sizeof(struct afu_config_record), GFP_KERNEL);
+	if (!cr)
+		return ERR_PTR(-ENOMEM);
+
+	cr->cr = cr_idx;
+	cr->device = cxl_afu_cr_read16(afu, cr_idx, PCI_DEVICE_ID);
+	cr->vendor = cxl_afu_cr_read16(afu, cr_idx, PCI_VENDOR_ID);
+	cr->class = cxl_afu_cr_read32(afu, cr_idx, PCI_CLASS_REVISION) >> 8;
+
+	/*
+	 * Export raw AFU PCIe like config record. For now this is read only by
+	 * root - we can expand that later to be readable by non-root and maybe
+	 * even writable provided we have a good use-case. Once we suport
+	 * exposing AFUs through a virtual PHB they will get that for free from
+	 * Linux' PCI infrastructure, but until then it's not clear that we
+	 * need it for anything since the main use case is just identifying
+	 * AFUs, which can be done via the vendor, device and class attributes.
+	 */
+	sysfs_bin_attr_init(&cr->config_attr);
+	cr->config_attr.attr.name = "config";
+	cr->config_attr.attr.mode = S_IRUSR;
+	cr->config_attr.size = afu->crs_len;
+	cr->config_attr.read = afu_read_config;
+
+	rc = kobject_init_and_add(&cr->kobj, &afu_config_record_type,
+				  &afu->dev.kobj, "cr%i", cr->cr);
+	if (rc)
+		goto err;
+
+	rc = sysfs_create_bin_file(&cr->kobj, &cr->config_attr);
+	if (rc)
+		goto err1;
+
+	rc = kobject_uevent(&cr->kobj, KOBJ_ADD);
+	if (rc)
+		goto err2;
+
+	return cr;
+err2:
+	sysfs_remove_bin_file(&cr->kobj, &cr->config_attr);
+err1:
+	kobject_put(&cr->kobj);
+	return ERR_PTR(rc);
+err:
+	kfree(cr);
+	return ERR_PTR(rc);
+}
+
+void cxl_sysfs_afu_remove(struct cxl_afu *afu)
+{
+	struct afu_config_record *cr, *tmp;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(afu_attrs); i++)
+		device_remove_file(&afu->dev, &afu_attrs[i]);
+
+	list_for_each_entry_safe(cr, tmp, &afu->crs, list) {
+		sysfs_remove_bin_file(&cr->kobj, &cr->config_attr);
+		kobject_put(&cr->kobj);
+	}
+}
+
 int cxl_sysfs_afu_add(struct cxl_afu *afu)
 {
+	struct afu_config_record *cr;
 	int i, rc;
 
+	INIT_LIST_HEAD(&afu->crs);
+
 	for (i = 0; i < ARRAY_SIZE(afu_attrs); i++) {
 		if ((rc = device_create_file(&afu->dev, &afu_attrs[i])))
 			goto err;
 	}
 
+	for (i = 0; i < afu->crs_num; i++) {
+		cr = cxl_sysfs_afu_new_cr(afu, i);
+		if (IS_ERR(cr)) {
+			rc = PTR_ERR(cr);
+			goto err1;
+		}
+		list_add(&cr->list, &afu->crs);
+	}
+
 	return 0;
 
+err1:
+	cxl_sysfs_afu_remove(afu);
+	return rc;
 err:
 	for (i--; i >= 0; i--)
 		device_remove_file(&afu->dev, &afu_attrs[i]);
 	return rc;
 }
 
-void cxl_sysfs_afu_remove(struct cxl_afu *afu)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(afu_attrs); i++)
-		device_remove_file(&afu->dev, &afu_attrs[i]);
-}
-
 int cxl_sysfs_afu_m_add(struct cxl_afu *afu)
 {
 	int i, rc;

From 3d5be0392f52489b7572903d83f1f267f26e6b69 Mon Sep 17 00:00:00 2001
From: Ian Munsie <imunsie@au1.ibm.com>
Date: Wed, 4 Feb 2015 19:09:02 +1100
Subject: [PATCH 33/34] cxl: Fail AFU initialisation if an invalid
 configuration record is found

If an AFU claims to have a configuration record but doesn't actually
contain a vendor and device ID, fail the AFU initialisation. Right now
this is just a way of politely letting AFU developers know that they
need to fix their config space, but later on we may expose the AFUs as
actual PCI devices in their own right and don't want to inadvertendly
expose an AFU with a bad config space.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/pci.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index 2b2e1b80d75985..1ef01647265f99 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -598,6 +598,8 @@ static int cxl_read_afu_descriptor(struct cxl_afu *afu)
 
 static int cxl_afu_descriptor_looks_ok(struct cxl_afu *afu)
 {
+	int i;
+
 	if (afu->psa && afu->adapter->ps_size <
 			(afu->pp_offset + afu->pp_size*afu->max_procs_virtualised)) {
 		dev_err(&afu->dev, "per-process PSA can't fit inside the PSA!\n");
@@ -607,6 +609,13 @@ static int cxl_afu_descriptor_looks_ok(struct cxl_afu *afu)
 	if (afu->pp_psa && (afu->pp_size < PAGE_SIZE))
 		dev_warn(&afu->dev, "AFU uses < PAGE_SIZE per-process PSA!");
 
+	for (i = 0; i < afu->crs_num; i++) {
+		if ((cxl_afu_cr_read32(afu, i, 0) == 0)) {
+			dev_err(&afu->dev, "ABORTING: AFU configuration record %i is invalid\n", i);
+			return -EINVAL;
+		}
+	}
+
 	return 0;
 }
 

From a6130ed253a931d2169c26ab0958d81b0dce4d6e Mon Sep 17 00:00:00 2001
From: Ian Munsie <imunsie@au1.ibm.com>
Date: Wed, 4 Feb 2015 19:10:38 +1100
Subject: [PATCH 34/34] cxl: Add missing return statement after handling AFU
 errror

We were missing a return statement in the PSL interrupt handler in the
case of an AFU error, which would trigger an "Unhandled CXL PSL IRQ"
warning. We do actually handle these type of errors (by notifying
userspace), so add the missing return IRQ_HANDLED so we don't throw
unecessary warnings.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 drivers/misc/cxl/irq.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/misc/cxl/irq.c b/drivers/misc/cxl/irq.c
index f0836472403b8f..c8929c52669170 100644
--- a/drivers/misc/cxl/irq.c
+++ b/drivers/misc/cxl/irq.c
@@ -170,6 +170,7 @@ static irqreturn_t cxl_irq(int irq, void *data, struct cxl_irq_info *irq_info)
 		}
 
 		cxl_ack_irq(ctx, CXL_PSL_TFC_An_A, 0);
+		return IRQ_HANDLED;
 	}
 	if (dsisr & CXL_PSL_DSISR_An_OC)
 		pr_devel("CXL interrupt: OS Context Warning\n");