# -*- makefile -*-

# The file Setup is used by the makesetup script to construct the files

# Makefile and config.c, from Makefile.pre and config.c.in,

# respectively. The file Setup itself is initially copied from

# Setup.dist; once it exists it will not be overwritten, so you can edit

# Setup to your heart's content. Note that Makefile.pre is created

# from Makefile.pre.in by the toplevel configure script.

# (VPATH notes: Setup and Makefile.pre are in the build directory, as

# are Makefile and config.c; the *.in and *.dist files are in the source

# directory.)

# Each line in this file describes one or more optional modules.

# Modules enabled here will not be compiled by the setup.py script,

# so the file can be used to override setup.py's behavior.

# Lines have the following structure:

#

# <module> ... [<sourcefile> ...] [<cpparg> ...] [<library> ...]

#

# <sourcefile> is anything ending in .c (.C, .cc, .c++ are C++ files)

# <cpparg> is anything starting with -I, -D, -U or -C

# <library> is anything ending in .a or beginning with -l or -L

# <module> is anything else but should be a valid Python

# identifier (letters, digits, underscores, beginning with non-digit)

#

# (As the makesetup script changes, it may recognize some other

# arguments as well, e.g. *.so and *.sl as libraries. See the big

# case statement in the makesetup script.)

#

# Lines can also have the form

#

# <name> = <value>

#

# which defines a Make variable definition inserted into Makefile.in

#

# Finally, if a line contains just the word "*shared*" (without the

# quotes but with the stars), then the following modules will not be

# built statically. The build process works like this:

#

# 1. Build all modules that are declared as static in Modules/Setup,

# combine them into libpythonxy.a, combine that into python.

# 2. Build all modules that are listed as shared in Modules/Setup.

# 3. Invoke setup.py. That builds all modules that

# a) are not builtin, and

# b) are not listed in Modules/Setup, and

# c) can be build on the target

#

# Therefore, modules declared to be shared will not be

# included in the config.c file, nor in the list of objects to be

# added to the library archive, and their linker options won't be

# added to the linker options. Rules to create their .o files and

# their shared libraries will still be added to the Makefile, and

# their names will be collected in the Make variable SHAREDMODS. This

# is used to build modules as shared libraries. (They can be

# installed using "make sharedinstall", which is implied by the

# toplevel "make install" target.) (For compatibility,

# *noconfig* has the same effect as *shared*.)

#

# In addition, *static* explicitly declares the following modules to

# be static. Lines containing "*static*" and "*shared*" may thus

# alternate throughout this file.

# NOTE: As a standard policy, as many modules as can be supported by a

# platform should be present. The distribution comes with all modules

# enabled that are supported by most platforms and don't require you

# to ftp sources from elsewhere.

# Some special rules to define PYTHONPATH.

# Edit the definitions below to indicate which options you are using.

# Don't add any whitespace or comments!

# Directories where library files get installed.

# DESTLIB is for Python modules; MACHDESTLIB for shared libraries.

DESTLIB=$(LIBDEST)

MACHDESTLIB=$(BINLIBDEST)

# NOTE: all the paths are now relative to the prefix that is computed

# at run time!

# Standard path -- don't edit.

# No leading colon since this is the first entry.

# Empty since this is now just the runtime prefix.

DESTPATH=

# Site specific path components -- should begin with : if non-empty

SITEPATH=

# Standard path components for test modules

TESTPATH=

# Path components for machine- or system-dependent modules and shared libraries

MACHDEPPATH=:plat-$(MACHDEP)

EXTRAMACHDEPPATH=

COREPYTHONPATH=$(DESTPATH)$(SITEPATH)$(TESTPATH)$(MACHDEPPATH)$(EXTRAMACHDEPPATH)

PYTHONPATH=$(COREPYTHONPATH)

# The modules listed here can't be built as shared libraries for

# various reasons; therefore they are listed here instead of in the

# normal order.

# This only contains the minimal set of modules required to run the

# setup.py script in the root of the Python source tree.

posix posixmodule.c # posix (UNIX) system calls

errno errnomodule.c # posix (UNIX) errno values

pwd pwdmodule.c # this is needed to find out the user's home dir

# if $HOME is not set

_sre _sre.c # Fredrik Lundh's new regular expressions

_codecs _codecsmodule.c # access to the builtin codecs and codec registry

_fileio _fileio.c # Standard I/O baseline

_weakref _weakref.c # weak references

# The zipimport module is always imported at startup. Having it as a

# builtin module avoids some bootstrapping problems and reduces overhead.

zipimport zipimport.c

# The rest of the modules listed in this file are all commented out by

# default. Usually they can be detected and built as dynamically

# loaded modules by the new setup.py script added in Python 2.1. If

# you're on a platform that doesn't support dynamic loading, want to

# compile modules statically into the Python binary, or need to

# specify some odd set of compiler switches, you can uncomment the

# appropriate lines below.

# ======================================================================

# The Python symtable module depends on .h files that setup.py doesn't track

_symtable symtablemodule.c

# Uncommenting the following line tells makesetup that all following

# modules are to be built as shared libraries (see above for more

# detail; also note that *static* reverses this effect):

#*shared*

# GNU readline. Unlike previous Python incarnations, GNU readline is

# now incorporated in an optional module, configured in the Setup file

# instead of by a configure script switch. You may have to insert a

# -L option pointing to the directory where libreadline.* lives,

# and you may have to change -ltermcap to -ltermlib or perhaps remove

# it, depending on your system -- see the GNU readline instructions.

# It's okay for this to be a shared library, too.

#readline readline.c -lreadline -ltermcap

# Modules that should always be present (non UNIX dependent):

#array arraymodule.c # array objects

#cmath cmathmodule.c # -lm # complex math library functions

#math mathmodule.c # -lm # math library functions, e.g. sin()

#_struct _struct.c # binary structure packing/unpacking

#time timemodule.c # -lm # time operations and variables

#operator operator.c # operator.add() and similar goodies

#_weakref _weakref.c # basic weak reference support

#_testcapi _testcapimodule.c # Python C API test module

#_random _randommodule.c # Random number generator

#collections collectionsmodule.c # Container types

#itertools itertoolsmodule.c # Functions creating iterators for efficient looping

#atexit atexitmodule.c # Register functions to be run at interpreter-shutdown

#unicodedata unicodedata.c # static Unicode character database

# access to ISO C locale support

#_locale _localemodule.c # -lintl

# Modules with some UNIX dependencies -- on by default:

# (If you have a really backward UNIX, select and socket may not be

# supported...)

#fcntl fcntlmodule.c # fcntl(2) and ioctl(2)

#spwd spwdmodule.c # spwd(3)

#grp grpmodule.c # grp(3)

#select selectmodule.c # select(2); not on ancient System V

# Memory-mapped files (also works on Win32).

#mmap mmapmodule.c

# CSV file helper

#_csv _csv.c

# Socket module helper for socket(2)

#_socket socketmodule.c

# Socket module helper for SSL support; you must comment out the other

# socket line above, and possibly edit the SSL variable:

#SSL=/usr/local/ssl

#_ssl _ssl.c \

# -DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \

# -L$(SSL)/lib -lssl -lcrypto

# The crypt module is now disabled by default because it breaks builds

# on many systems (where -lcrypt is needed), e.g. Linux (I believe).

#

# First, look at Setup.config; configure may have set this for you.

#crypt cryptmodule.c # -lcrypt # crypt(3); needs -lcrypt on some systems

# Some more UNIX dependent modules -- off by default, since these

# are not supported by all UNIX systems:

#nis nismodule.c -lnsl # Sun yellow pages -- not everywhere

#termios termios.c # Steen Lumholt's termios module

#resource resource.c # Jeremy Hylton's rlimit interface

# Multimedia modules -- off by default.

# These don't work for 64-bit platforms!!!

# #993173 says audioop works on 64-bit platforms, though.

# These represent audio samples or images as strings:

#audioop audioop.c # Operations on audio samples

# Note that the _md5 and _sha modules are normally only built if the

# system does not have the OpenSSL libs containing an optimized version.

# The _md5 module implements the RSA Data Security, Inc. MD5

# Message-Digest Algorithm, described in RFC 1321. The necessary files

# md5.c and md5.h are included here.

#_md5 md5module.c md5.c

# The _sha module implements the SHA checksum algorithms.

# (NIST's Secure Hash Algorithms.)

#_sha shamodule.c

#_sha256 sha256module.c

#_sha512 sha512module.c

# The _tkinter module.

#

# The command for _tkinter is long and site specific. Please

# uncomment and/or edit those parts as indicated. If you don't have a

# specific extension (e.g. Tix or BLT), leave the corresponding line

# commented out. (Leave the trailing backslashes in! If you

# experience strange errors, you may want to join all uncommented

# lines and remove the backslashes -- the backslash interpretation is

# done by the shell's "read" command and it may not be implemented on

# every system.

# *** Always uncomment this (leave the leading underscore in!):

# _tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \

# *** Uncomment and edit to reflect where your Tcl/Tk libraries are:

# -L/usr/local/lib \

# *** Uncomment and edit to reflect where your Tcl/Tk headers are:

# -I/usr/local/include \

# *** Uncomment and edit to reflect where your X11 header files are:

# -I/usr/X11R6/include \

# *** Or uncomment this for Solaris:

# -I/usr/openwin/include \

# *** Uncomment and edit for Tix extension only:

# -DWITH_TIX -ltix8.1.8.2 \

# *** Uncomment and edit for BLT extension only:

# -DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \

# *** Uncomment and edit for PIL (TkImaging) extension only:

# (See http://www.pythonware.com/products/pil/ for more info)

# -DWITH_PIL -I../Extensions/Imaging/libImaging tkImaging.c \

# *** Uncomment and edit for TOGL extension only:

# -DWITH_TOGL togl.c \

# *** Uncomment and edit to reflect your Tcl/Tk versions:

# -ltk8.2 -ltcl8.2 \

# *** Uncomment and edit to reflect where your X11 libraries are:

# -L/usr/X11R6/lib \

# *** Or uncomment this for Solaris:

# -L/usr/openwin/lib \

# *** Uncomment these for TOGL extension only:

# -lGL -lGLU -lXext -lXmu \

# *** Uncomment for AIX:

# -lld \

# *** Always uncomment this; X11 libraries to link with:

# -lX11

# Lance Ellinghaus's syslog module

#syslog syslogmodule.c # syslog daemon interface

# Curses support, requring the System V version of curses, often

# provided by the ncurses library. e.g. on Linux, link with -lncurses

# instead of -lcurses).

#

# First, look at Setup.config; configure may have set this for you.

#_curses _cursesmodule.c -lcurses -ltermcap

# Wrapper for the panel library that's part of ncurses and SYSV curses.

#_curses_panel _curses_panel.c -lpanel -lncurses

# Modules that provide persistent dictionary-like semantics. You will

# probably want to arrange for at least one of them to be available on

# your machine, though none are defined by default because of library

# dependencies. The Python module dbm/__init__.py provides an

# implementation independent wrapper for these; dbm/dumb.py provides

# similar functionality (but slower of course) implemented in Python.

# The standard Unix dbm module has been moved to Setup.config so that

# it will be compiled as a shared library by default. Compiling it as

# a built-in module causes conflicts with the pybsddb3 module since it

# creates a static dependency on an out-of-date version of db.so.

#

# First, look at Setup.config; configure may have set this for you.

#_dbm _dbmmodule.c # dbm(3) may require -lndbm or similar

# Anthony Baxter's gdbm module. GNU dbm(3) will require -lgdbm:

#

# First, look at Setup.config; configure may have set this for you.

#_gdbm _gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm

# Sleepycat Berkeley DB interface.

#

# This requires the Sleepycat DB code, see http://www.sleepycat.com/

# The earliest supported version of that library is 3.0, the latest

# supported version is 4.0 (4.1 is specifically not supported, as that

# changes the semantics of transactional databases). A list of available

# releases can be found at

#

# http://www.sleepycat.com/update/index.html

#

# Edit the variables DB and DBLIBVERto point to the db top directory

# and the subdirectory of PORT where you built it.

#DB=/usr/local/BerkeleyDB.4.0

#DBLIBVER=4.0

#DBINC=$(DB)/include

#DBLIB=$(DB)/lib

#_bsddb _bsddb.c -I$(DBINC) -L$(DBLIB) -ldb-$(DBLIBVER)

# Helper module for various ascii-encoders

#binascii binascii.c

# Fred Drake's interface to the Python parser

#parser parsermodule.c

# Lee Busby's SIGFPE modules.

# The library to link fpectl with is platform specific.

# Choose *one* of the options below for fpectl:

# For SGI IRIX (tested on 5.3):

#fpectl fpectlmodule.c -lfpe

# For Solaris with SunPro compiler (tested on Solaris 2.5 with SunPro C 4.2):

# (Without the compiler you don't have -lsunmath.)

#fpectl fpectlmodule.c -R/opt/SUNWspro/lib -lsunmath -lm

# For other systems: see instructions in fpectlmodule.c.

#fpectl fpectlmodule.c ...

# Test module for fpectl. No extra libraries needed.

#fpetest fpetestmodule.c

# Andrew Kuchling's zlib module.

# This require zlib 1.1.3 (or later).

# See http://www.gzip.org/zlib/

#zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz

# Interface to the Expat XML parser

#

# Expat was written by James Clark and is now maintained by a group of

# developers on SourceForge; see www.libexpat.org for more

# information. The pyexpat module was written by Paul Prescod after a

# prototype by Jack Jansen. Source of Expat 1.95.2 is included in

# Modules/expat/. Usage of a system shared libexpat.so/expat.dll is

# not advised.

#

# More information on Expat can be found at www.libexpat.org.

#

#EXPAT_DIR=/usr/local/src/expat-1.95.2

#pyexpat pyexpat.c -DHAVE_EXPAT_H -I$(EXPAT_DIR)/lib -L$(EXPAT_DIR) -lexpat

# Hye-Shik Chang's CJKCodecs

# multibytecodec is required for all the other CJK codec modules

#_multibytecodec cjkcodecs/multibytecodec.c

#_codecs_cn cjkcodecs/_codecs_cn.c

#_codecs_hk cjkcodecs/_codecs_hk.c

#_codecs_iso2022 cjkcodecs/_codecs_iso2022.c

#_codecs_jp cjkcodecs/_codecs_jp.c

#_codecs_kr cjkcodecs/_codecs_kr.c

#_codecs_tw cjkcodecs/_codecs_tw.c

# Example -- included for reference only:

# xx xxmodule.c

# Another example -- the 'xxsubtype' module shows C-level subtyping in action

xxsubtype xxsubtype.c