# -*- makefile -*-

# The file Setup is used by the makesetup script to construct the files

# Makefile and config.c, from Makefile.pre and config.c.in,

# respectively. The file Setup itself is initially copied from

# Setup.in; once it exists it will not be overwritten, so you can edit

# Setup to your heart's content. Note that Makefile.pre is created

# from Makefile.pre.in by the toplevel configure script.

# (VPATH notes: Setup and Makefile.pre are in the build directory, as

# are Makefile and config.c; the *.in files are in the source

# directory.)

# Each line in this file describes one or more optional modules.

# Comment out lines to suppress modules.

# Lines have the following structure:

#

# <module> ... [<sourcefile> ...] [<cpparg> ...] [<library> ...]

#

# <sourcefile> is anything ending in .c (.C, .cc, .c++ are C++ files)

# <cpparg> is anything starting with -I, -D, -U or -C

# <library> is anything ending in .a or beginning with -l or -L

# <module> is anything else but should be a valid Python

# identifier (letters, digits, underscores, beginning with non-digit)

#

# (As the makesetup script changes, it may recognize some other

# arguments as well, e.g. *.so and *.sl as libraries. See the big

# case statement in the makesetup script.)

#

# Lines can also have the form

#

# <name> = <value>

#

# which defines a Make variable definition inserted into Makefile.in

#

# Finally, if a line contains just the word "*shared*" (without the

# quotes but with the stars), then the following modules will not be

# included in the config.c file, nor in the list of objects to be

# added to the library archive, and their linker options won't be

# added to the linker options, but rules to create their .o files and

# their shared libraries will still be added to the Makefile, and

# their names will be collected in the Make variable SHAREDMODS. This

# is used to build modules as shared libraries. (They can be

# installed using "make sharedinstall", which is implied by the

# toplevel "make install" target.) (For compatibility,

# *noconfig* has the same effect as *shared*.)

#

# In addition, *static* reverses this effect (negating a previous

# *shared* line).

# NOTE: As a standard policy, as many modules as can be supported by a

# platform should be present. The distribution comes with all modules

# enabled that are supported by most platforms and don't require you

# to ftp sources from elsewhere.

# Some special rules to define PYTHONPATH.

# Edit the definitions below to indicate which options you are using.

# Don't add any whitespace or comments!

# Directories where library files get installed.

# DESTLIB is for Python modules; MACHDESTLIB for shared libraries.

DESTLIB=$(LIBDEST)

MACHDESTLIB=$(BINLIBDEST)

# NOTE: all the paths are now relative to the prefix that is computed

# at run time!

# Standard path -- don't edit.

# No leading colon since this is the first entry.

# Empty since this is now just the runtime prefix.

DESTPATH=

# Site specific path components -- should begin with : if non-empty

SITEPATH=

# Standard path components for test modules

TESTPATH=

# Path components for machine- or system-dependent modules and shared libraries

MACHDEPPATH=:plat-$(MACHDEP)

COREPYTHONPATH=$(DESTPATH)$(SITEPATH)$(TESTPATH)$(MACHDEPPATH)$(STDWINPATH)$(TKPATH)

PYTHONPATH=$(COREPYTHONPATH)

# The modules listed here can't be built as shared libraries for

# various reasons; therefore they are listed here instead of in the

# normal order.

# Some modules that are normally always on:

regex regexmodule.c regexpr.c # Regular expressions, GNU Emacs style

pcre pcremodule.c pypcre.c # Regular expressions, Perl style (for re.py)

posix posixmodule.c # posix (UNIX) system calls

signal signalmodule.c # signal(2)

# The SGI specific GL module:

GLHACK=-Dclear=__GLclear

#gl glmodule.c cgensupport.c -I$(srcdir) $(GLHACK) -lgl -lX11

# The thread module is now automatically enabled, see Setup.thread.

# Pure module. Cannot be linked dynamically.

# -DWITH_QUANTIFY, -DWITH_PURIFY, or -DWITH_ALL_PURE

#WHICH_PURE_PRODUCTS=-DWITH_ALL_PURE

#PURE_INCLS=-I/usr/local/include

#PURE_STUBLIBS=-L/usr/local/lib -lpurify_stubs -lquantify_stubs

#pure puremodule.c $(WHICH_PURE_PRODUCTS) $(PURE_INCLS) $(PURE_STUBLIBS)

# Uncommenting the following line tells makesetup that all following

# modules are to be built as shared libraries (see above for more

# detail; also note that *static* reverses this effect):

#*shared*

# GNU readline. Unlike previous Python incarnations, GNU readline is

# now incorporated in an optional module, configured in the Setup file

# instead of by a configure script switch. You may have to insert a

# -L option pointing to the directory where libreadline.* lives,

# and you may have to change -ltermcap to -ltermlib or perhaps remove

# it, depending on your system -- see the GNU readline instructions.

# It's okay for this to be a shared library, too.

#readline readline.c -lreadline -ltermcap

# Modules that should always be present (non UNIX dependent):

array arraymodule.c # array objects

cmath cmathmodule.c # -lm # complex math library functions

math mathmodule.c # -lm # math library functions, e.g. sin()

strop stropmodule.c # fast string operations implemented in C

struct structmodule.c # binary structure packing/unpacking

time timemodule.c # -lm # time operations and variables

operator operator.c # operator.add() and similar goodies

#_locale _localemodule.c # access to ISO C locale support

# Modules with some UNIX dependencies -- on by default:

# (If you have a really backward UNIX, select and socket may not be

# supported...)

fcntl fcntlmodule.c # fcntl(2) and ioctl(2)

pwd pwdmodule.c # pwd(3)

grp grpmodule.c # grp(3)

select selectmodule.c # select(2); not on ancient System V

socket socketmodule.c # socket(2); not on ancient System V

#_socket socketmodule.c # socket(2); use this one for BeOS sockets

errno errnomodule.c # posix (UNIX) errno values

# The crypt module is now disabled by default because it breaks builds

# on many systems (where -lcrypt is needed), e.g. Linux (I believe).

#crypt cryptmodule.c # -lcrypt # crypt(3); needs -lcrypt on some systems

# Some more UNIX dependent modules -- off by default, since these

# are not supported by all UNIX systems:

#nis nismodule.c # Sun yellow pages -- not everywhere

#termios termios.c # Steen Lumholt's termios module

#resource resource.c # Jeremy Hylton's rlimit interface

# Multimedia modules -- off by default.

# These don't work for 64-bit platforms!!!

# These represent audio samples or images as strings:

#audioop audioop.c # Operations on audio samples

#imageop imageop.c # Operations on images

#rgbimg rgbimgmodule.c # Read SGI RGB image files (but coded portably)

# The stdwin module provides a simple, portable (between X11 and Mac)

# windowing interface. You need to ftp the STDWIN library, e.g. from

# ftp://ftp.cwi.nl/pub/stdwin. (If you get it elsewhere, be sure to

# get version 1.0 or higher!) The STDWIN variable must point to the

# STDWIN toplevel directory.

# Uncomment and edit as needed:

#STDWIN=/ufs/guido/src/stdwin

# Uncomment these lines:

#STDWINPATH=:lib-stdwin

#LIBTEXTEDIT=$(STDWIN)/$(MACHDEP)/Packs/textedit/libtextedit.a

#LIBX11STDWIN=$(STDWIN)/$(MACHDEP)/Ports/x11/libstdwin.a

#stdwin stdwinmodule.c -I$(STDWIN)/H $(LIBTEXTEDIT) $(LIBX11STDWIN) -lX11

# Use this instead of the last two lines above for alphanumeric stdwin:

#LIBALFASTDWIN=$(STDWIN)/$(MACHDEP)/Ports/alfa/libstdwin.a

#stdwin stdwinmodule.c -I$(STDWIN)/H $(LIBTEXTEDIT) $(LIBALFASTDWIN) -ltermcap

# The md5 module implements the RSA Data Security, Inc. MD5

# Message-Digest Algorithm, described in RFC 1321. The necessary files

# md5c.c and md5.h are included here.

md5 md5module.c md5c.c

# The sha module implements the SHA checksum algorithm.

# (NIST's Secure Hash Algorithm.)

sha shamodule.c

# The mpz module interfaces to the GNU Multiple Precision library.

# You need to ftp the GNU MP library.

# The GMP variable must point to the GMP source directory.

# This was originally written and tested against GMP 1.2 and 1.3.2.

# It has been modified by Rob Hooft to work with 2.0.2 as well, but I

# haven't tested it recently.

# A compatible MP library unencombered by the GPL also exists. It was

# posted to comp.sources.misc in volume 40 and is widely available from

# FTP archive sites. One URL for it is:

# ftp://gatekeeper.dec.com/.b/usenet/comp.sources.misc/volume40/fgmp/part01.Z

#GMP=/ufs/guido/src/gmp

#mpz mpzmodule.c -I$(GMP) $(GMP)/libgmp.a

# SGI IRIX specific modules -- off by default.

# These module work on any SGI machine:

# *** gl must be enabled higher up in this file ***

#fm fmmodule.c $(GLHACK) -lfm -lgl # Font Manager

#sgi sgimodule.c # sgi.nap() and a few more

# This module requires the header file

# /usr/people/4Dgifts/iristools/include/izoom.h:

#imgfile imgfile.c -limage -lgutil -lgl -lm # Image Processing Utilities

# These modules require the Multimedia Development Option (I think):

#al almodule.c -laudio # Audio Library

#cd cdmodule.c -lcdaudio -lds -lmediad # CD Audio Library

#cl clmodule.c -lcl -lawareaudio # Compression Library

#sv svmodule.c yuvconvert.c -lsvideo -lXext -lX11 # Starter Video

# The FORMS library, by Mark Overmars, implements user interface

# components such as dialogs and buttons using SGI's GL and FM

# libraries. You must ftp the FORMS library separately from

# ftp://ftp.cs.ruu.nl/pub/SGI/FORMS. It was tested with FORMS 2.2a.

# NOTE: if you want to be able to use FORMS and curses simultaneously

# (or both link them statically into the same binary), you must

# compile all of FORMS with the cc option "-Dclear=__GLclear".

# The FORMS variable must point to the FORMS subdirectory of the forms

# toplevel directory:

#FORMS=/ufs/guido/src/forms/FORMS

#fl flmodule.c -I$(FORMS) $(GLHACK) $(FORMS)/libforms.a -lfm -lgl

# SunOS specific modules -- off by default:

#sunaudiodev sunaudiodev.c

# George Neville-Neil's timing module:

#timing timingmodule.c

# The _tkinter module.

#

# The TKPATH variable is always enabled, to save you the effort.

TKPATH=:lib-tk

# The command for _tkinter is long and site specific. Please

# uncomment and/or edit those parts as indicated. If you don't have a

# specific extension (e.g. Tix or BLT), leave the corresponding line

# commented out. (Leave the trailing backslashes in! If you

# experience strange errors, you may want to join all uncommented

# lines and remove the backslashes -- the backslash interpretation is

# done by the shell's "read" command and it may not be implemented on

# every system.

# *** Always uncomment this (leave the leading underscore in!):

# _tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \

# *** Uncomment and edit to reflect where your Tcl/Tk headers are:

# -I/usr/local/include \

# *** Uncomment and edit to reflect where your X11 header files are:

# -I/usr/X11R6/include \

# *** Or uncomment this for Solaris:

# -I/usr/openwin/include \

# *** Uncomment and edit for Tix extension only:

# -DWITH_TIX -ltix4.1.8.0 \

# *** Uncomment and edit for BLT extension only:

# -DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \

# *** Uncomment and edit for PIL (TkImaging) extension only:

# -DWITH_PIL -I../Extensions/Imaging/libImaging tkImaging.c \

# *** Uncomment and edit for TOGL extension only:

# -DWITH_TOGL togl.c \

# *** Uncomment and edit to reflect where your Tcl/Tk libraries are:

# -L/usr/local/lib \

# *** Uncomment and edit to reflect your Tcl/Tk versions:

# -ltk8.0 -ltcl8.0 \

# *** Uncomment and edit to reflect where your X11 libraries are:

# -L/usr/X11R6/lib \

# *** Or uncomment this for Solaris:

# -L/usr/openwin/lib \

# *** Uncomment these for TOGL extension only:

# -lGL -lGLU -lXext -lXmu \

# *** Uncomment for AIX:

# -lld \

# *** Always uncomment this; X11 libraries to link with:

# -lX11

# Lance Ellinghaus's modules:

rotor rotormodule.c # enigma-inspired encryption

#syslog syslogmodule.c # syslog daemon interface

# Lance's curses module. This requires the System V version of

# curses, sometimes known as ncurses (e.g. on Linux, link with

# -lncurses instead of -lcurses; on SunOS 4.1.3, insert -I/usr/5include

# -L/usr/5lib before -lcurses).

#curses cursesmodule.c -lcurses -ltermcap

# Tommy Burnette's 'new' module (creates new empty objects of certain kinds):

new newmodule.c

# Generic (SunOS / SVR4) dynamic loading module.

# This is not needed for dynamic loading of Python modules --

# it is a highly experimental and dangerous device for calling

# *arbitrary* C functions in *arbitrary* shared libraries:

#dl dlmodule.c

# Modules that provide persistent dictionary-like semantics. You will

# probably want to arrange for at least one of them to be available on

# your machine, though none are defined by default because of library

# dependencies. The Python module anydbm.py provides an

# implementation independent wrapper for these; dumbdbm.py provides

# similar functionality (but slower of course) implemented in Python.

# The standard Unix dbm module:

#dbm dbmmodule.c # dbm(3) may require -lndbm or similar

# Anthony Baxter's gdbm module. GNU dbm(3) will require -lgdbm:

#gdbm gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm

# Berkeley DB interface.

#

# This requires the Berkeley DB code, see

# ftp://ftp.cs.berkeley.edu/pub/4bsd/db.1.85.tar.gz

#

# Edit the variables DB and DBPORT to point to the db top directory

# and the subdirectory of PORT where you built it.

#

# (See http://www.jenkon-dev.com/~rd/python/ for an interface to

# BSD DB 2.1.0.)

#DB=/depot/sundry/src/berkeley-db/db.1.85

#DBPORT=$(DB)/PORT/irix.5.3

#bsddb bsddbmodule.c -I$(DBPORT)/include -I$(DBPORT) $(DBPORT)/libdb.a

# David Wayne Williams' soundex module (obsolete -- this will disappear!)

#soundex soundex.c

# Helper module for various ascii-encoders

binascii binascii.c

# Fred Drake's interface to the Python parser

parser parsermodule.c

# Digital Creations' cStringIO and cPickle

cStringIO cStringIO.c

cPickle cPickle.c

# Lee Busby's SIGFPE modules.

# The library to link fpectl with is platform specific.

# Choose *one* of the options below for fpectl:

# For SGI IRIX (tested on 5.3):

#fpectl fpectlmodule.c -lfpe

# For Solaris with SunPro compiler (tested on Solaris 2.5 with SunPro C 4.2):

# (Without the compiler you don't have -lsunmath.)

#fpectl fpectlmodule.c -R/opt/SUNWspro/lib -lsunmath -lm

# For other systems: see instructions in fpectlmodule.c.

#fpectl fpectlmodule.c ...

# Test module for fpectl. No extra libraries needed.

#fpetest fpetestmodule.c

# Andrew Kuchling's zlib module.

# This require zlib 1.1.3 (or later).

# See http://www.cdrom.com/pub/infozip/zlib/

#zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz

# Example -- included for reference only:

# xx xxmodule.c