/* Thread and interpreter state structures and their interfaces */

#include "Python.h"

#define GET_TSTATE() \

((PyThreadState*)_Py_atomic_load_relaxed(&_PyThreadState_Current))

#define SET_TSTATE(value) \

_Py_atomic_store_relaxed(&_PyThreadState_Current, (uintptr_t)(value))

#define GET_INTERP_STATE() \

(GET_TSTATE()->interp)

/* --------------------------------------------------------------------------

CAUTION

Always use PyMem_RawMalloc() and PyMem_RawFree() directly in this file. A

number of these functions are advertised as safe to call when the GIL isn't

held, and in a debug build Python redirects (e.g.) PyMem_NEW (etc) to Python's

debugging obmalloc functions. Those aren't thread-safe (they rely on the GIL

to avoid the expense of doing their own locking).

-------------------------------------------------------------------------- */

#ifdef HAVE_DLOPEN

#ifdef HAVE_DLFCN_H

#include <dlfcn.h>

#endif

#if !HAVE_DECL_RTLD_LAZY

#define RTLD_LAZY 1

#endif

#endif

#ifdef __cplusplus

extern "C" {

#endif

int _PyGILState_check_enabled = 1;

#ifdef WITH_THREAD

#include "pythread.h"

static PyThread_type_lock head_mutex = NULL; /* Protects interp->tstate_head */

#define HEAD_INIT() (void)(head_mutex || (head_mutex = PyThread_allocate_lock()))

#define HEAD_LOCK() PyThread_acquire_lock(head_mutex, WAIT_LOCK)

#define HEAD_UNLOCK() PyThread_release_lock(head_mutex)

/* The single PyInterpreterState used by this process'

GILState implementation

*/

/* TODO: Given interp_main, it may be possible to kill this ref */

static PyInterpreterState *autoInterpreterState = NULL;

static int autoTLSkey = -1;

#else

#define HEAD_INIT() /* Nothing */

#define HEAD_LOCK() /* Nothing */

#define HEAD_UNLOCK() /* Nothing */

#endif

static PyInterpreterState *interp_head = NULL;

static PyInterpreterState *interp_main = NULL;

/* Assuming the current thread holds the GIL, this is the

PyThreadState for the current thread. */

_Py_atomic_address _PyThreadState_Current = {0};

PyThreadFrameGetter _PyThreadState_GetFrame = NULL;

#ifdef WITH_THREAD

static void _PyGILState_NoteThreadState(PyThreadState* tstate);

#endif

/* _next_interp_id is an auto-numbered sequence of small integers.

It gets initialized in _PyInterpreterState_Init(), which is called

in Py_Initialize(), and used in PyInterpreterState_New(). A negative

interpreter ID indicates an error occurred. The main interpreter

will always have an ID of 0. Overflow results in a RuntimeError.

If that becomes a problem later then we can adjust, e.g. by using

a Python int.

We initialize this to -1 so that the pre-Py_Initialize() value

results in an error. */

static int64_t _next_interp_id = -1;

void

_PyInterpreterState_Init(void)

{

_next_interp_id = 0;

}

PyInterpreterState *

PyInterpreterState_New(void)

{

PyInterpreterState *interp = (PyInterpreterState *)

PyMem_RawMalloc(sizeof(PyInterpreterState));

if (interp != NULL) {

HEAD_INIT();

#ifdef WITH_THREAD

if (head_mutex == NULL)

Py_FatalError("Can't initialize threads for interpreter");

#endif

interp->modules = NULL;

interp->modules_by_index = NULL;

interp->sysdict = NULL;

interp->builtins = NULL;

interp->builtins_copy = NULL;

interp->tstate_head = NULL;

interp->codec_search_path = NULL;

interp->codec_search_cache = NULL;

interp->codec_error_registry = NULL;

interp->codecs_initialized = 0;

interp->fscodec_initialized = 0;

interp->importlib = NULL;

interp->import_func = NULL;

interp->eval_frame = _PyEval_EvalFrameDefault;

interp->co_extra_user_count = 0;

#ifdef HAVE_DLOPEN

#if HAVE_DECL_RTLD_NOW

interp->dlopenflags = RTLD_NOW;

#else

interp->dlopenflags = RTLD_LAZY;

#endif

#endif

#ifdef HAVE_FORK

interp->before_forkers = NULL;

interp->after_forkers_parent = NULL;

interp->after_forkers_child = NULL;

#endif

HEAD_LOCK();

interp->next = interp_head;

if (interp_main == NULL) {

interp_main = interp;

}

interp_head = interp;

if (_next_interp_id < 0) {

/* overflow or Py_Initialize() not called! */

PyErr_SetString(PyExc_RuntimeError,

"failed to get an interpreter ID");

interp = NULL;

} else {

interp->id = _next_interp_id;

_next_interp_id += 1;

}

HEAD_UNLOCK();

}

return interp;

}

void

PyInterpreterState_Clear(PyInterpreterState *interp)

{

PyThreadState *p;

HEAD_LOCK();

for (p = interp->tstate_head; p != NULL; p = p->next)

PyThreadState_Clear(p);

HEAD_UNLOCK();

Py_CLEAR(interp->codec_search_path);

Py_CLEAR(interp->codec_search_cache);

Py_CLEAR(interp->codec_error_registry);

Py_CLEAR(interp->modules);

Py_CLEAR(interp->modules_by_index);

Py_CLEAR(interp->sysdict);

Py_CLEAR(interp->builtins);

Py_CLEAR(interp->builtins_copy);

Py_CLEAR(interp->importlib);

Py_CLEAR(interp->import_func);

#ifdef HAVE_FORK

Py_CLEAR(interp->before_forkers);

Py_CLEAR(interp->after_forkers_parent);

Py_CLEAR(interp->after_forkers_child);

#endif

}

static void

zapthreads(PyInterpreterState *interp)

{

PyThreadState *p;

/* No need to lock the mutex here because this should only happen

when the threads are all really dead (XXX famous last words). */

while ((p = interp->tstate_head) != NULL) {

PyThreadState_Delete(p);

}

}

void

PyInterpreterState_Delete(PyInterpreterState *interp)

{

PyInterpreterState **p;

zapthreads(interp);

HEAD_LOCK();

for (p = &interp_head; ; p = &(*p)->next) {

if (*p == NULL)

Py_FatalError(

"PyInterpreterState_Delete: invalid interp");

if (*p == interp)

break;

}

if (interp->tstate_head != NULL)

Py_FatalError("PyInterpreterState_Delete: remaining threads");

*p = interp->next;

if (interp_main == interp) {

interp_main = NULL;

if (interp_head != NULL)

Py_FatalError("PyInterpreterState_Delete: remaining subinterpreters");

}

HEAD_UNLOCK();

PyMem_RawFree(interp);

#ifdef WITH_THREAD

if (interp_head == NULL && head_mutex != NULL) {

PyThread_free_lock(head_mutex);

head_mutex = NULL;

}

#endif

}

int64_t

PyInterpreterState_GetID(PyInterpreterState *interp)

{

if (interp == NULL) {

PyErr_SetString(PyExc_RuntimeError, "no interpreter provided");

return -1;

}

return interp->id;

}

/* Default implementation for _PyThreadState_GetFrame */

static struct _frame *

threadstate_getframe(PyThreadState *self)

{

return self->frame;

}

static PyThreadState *

new_threadstate(PyInterpreterState *interp, int init)

{

PyThreadState *tstate = (PyThreadState *)PyMem_RawMalloc(sizeof(PyThreadState));

if (_PyThreadState_GetFrame == NULL)

_PyThreadState_GetFrame = threadstate_getframe;

if (tstate != NULL) {

tstate->interp = interp;

tstate->frame = NULL;

tstate->recursion_depth = 0;

tstate->overflowed = 0;

tstate->recursion_critical = 0;

tstate->tracing = 0;

tstate->use_tracing = 0;

tstate->gilstate_counter = 0;

tstate->async_exc = NULL;

#ifdef WITH_THREAD

tstate->thread_id = PyThread_get_thread_ident();

#else

tstate->thread_id = 0;

#endif

tstate->dict = NULL;

tstate->curexc_type = NULL;

tstate->curexc_value = NULL;

tstate->curexc_traceback = NULL;

tstate->exc_type = NULL;

tstate->exc_value = NULL;

tstate->exc_traceback = NULL;

tstate->c_profilefunc = NULL;

tstate->c_tracefunc = NULL;

tstate->c_profileobj = NULL;

tstate->c_traceobj = NULL;

tstate->trash_delete_nesting = 0;

tstate->trash_delete_later = NULL;

tstate->on_delete = NULL;

tstate->on_delete_data = NULL;

tstate->coroutine_wrapper = NULL;

tstate->in_coroutine_wrapper = 0;

tstate->async_gen_firstiter = NULL;

tstate->async_gen_finalizer = NULL;

if (init)

_PyThreadState_Init(tstate);

HEAD_LOCK();

tstate->prev = NULL;

tstate->next = interp->tstate_head;

if (tstate->next)

tstate->next->prev = tstate;

interp->tstate_head = tstate;

HEAD_UNLOCK();

}

return tstate;

}

PyThreadState *

PyThreadState_New(PyInterpreterState *interp)

{

return new_threadstate(interp, 1);

}

PyThreadState *

_PyThreadState_Prealloc(PyInterpreterState *interp)

{

return new_threadstate(interp, 0);

}

void

_PyThreadState_Init(PyThreadState *tstate)

{

#ifdef WITH_THREAD

_PyGILState_NoteThreadState(tstate);

#endif

}

PyObject*

PyState_FindModule(struct PyModuleDef* module)

{

Py_ssize_t index = module->m_base.m_index;

PyInterpreterState *state = GET_INTERP_STATE();

PyObject *res;

if (module->m_slots) {

return NULL;

}

if (index == 0)

return NULL;

if (state->modules_by_index == NULL)

return NULL;

if (index >= PyList_GET_SIZE(state->modules_by_index))

return NULL;

res = PyList_GET_ITEM(state->modules_by_index, index);

return res==Py_None ? NULL : res;

}

int

_PyState_AddModule(PyObject* module, struct PyModuleDef* def)

{

PyInterpreterState *state;

if (!def) {

assert(PyErr_Occurred());

return -1;

}

if (def->m_slots) {

PyErr_SetString(PyExc_SystemError,

"PyState_AddModule called on module with slots");

return -1;

}

state = GET_INTERP_STATE();

if (!state->modules_by_index) {

state->modules_by_index = PyList_New(0);

if (!state->modules_by_index)

return -1;

}

while(PyList_GET_SIZE(state->modules_by_index) <= def->m_base.m_index)

if (PyList_Append(state->modules_by_index, Py_None) < 0)

return -1;

Py_INCREF(module);

return PyList_SetItem(state->modules_by_index,

def->m_base.m_index, module);

}

int

PyState_AddModule(PyObject* module, struct PyModuleDef* def)

{

Py_ssize_t index;

PyInterpreterState *state = GET_INTERP_STATE();

if (!def) {

Py_FatalError("PyState_AddModule: Module Definition is NULL");

return -1;

}

index = def->m_base.m_index;

if (state->modules_by_index) {

if(PyList_GET_SIZE(state->modules_by_index) >= index) {

if(module == PyList_GET_ITEM(state->modules_by_index, index)) {

Py_FatalError("PyState_AddModule: Module already added!");

return -1;

}

}

}

return _PyState_AddModule(module, def);

}

int

PyState_RemoveModule(struct PyModuleDef* def)

{

PyInterpreterState *state;

Py_ssize_t index = def->m_base.m_index;

if (def->m_slots) {

PyErr_SetString(PyExc_SystemError,

"PyState_RemoveModule called on module with slots");

return -1;

}

state = GET_INTERP_STATE();

if (index == 0) {

Py_FatalError("PyState_RemoveModule: Module index invalid.");

return -1;

}

if (state->modules_by_index == NULL) {

Py_FatalError("PyState_RemoveModule: Interpreters module-list not acessible.");

return -1;

}

if (index > PyList_GET_SIZE(state->modules_by_index)) {

Py_FatalError("PyState_RemoveModule: Module index out of bounds.");

return -1;

}

return PyList_SetItem(state->modules_by_index, index, Py_None);

}

/* used by import.c:PyImport_Cleanup */

void

_PyState_ClearModules(void)

{

PyInterpreterState *state = GET_INTERP_STATE();

if (state->modules_by_index) {

Py_ssize_t i;

for (i = 0; i < PyList_GET_SIZE(state->modules_by_index); i++) {

PyObject *m = PyList_GET_ITEM(state->modules_by_index, i);

if (PyModule_Check(m)) {

/* cleanup the saved copy of module dicts */

PyModuleDef *md = PyModule_GetDef(m);

if (md)

Py_CLEAR(md->m_base.m_copy);

}

}

/* Setting modules_by_index to NULL could be dangerous, so we

clear the list instead. */

if (PyList_SetSlice(state->modules_by_index,

0, PyList_GET_SIZE(state->modules_by_index),

NULL))

PyErr_WriteUnraisable(state->modules_by_index);

}

}

void

PyThreadState_Clear(PyThreadState *tstate)

{

if (Py_VerboseFlag && tstate->frame != NULL)

fprintf(stderr,

"PyThreadState_Clear: warning: thread still has a frame\n");

Py_CLEAR(tstate->frame);

Py_CLEAR(tstate->dict);

Py_CLEAR(tstate->async_exc);

Py_CLEAR(tstate->curexc_type);

Py_CLEAR(tstate->curexc_value);

Py_CLEAR(tstate->curexc_traceback);

Py_CLEAR(tstate->exc_type);

Py_CLEAR(tstate->exc_value);

Py_CLEAR(tstate->exc_traceback);

tstate->c_profilefunc = NULL;

tstate->c_tracefunc = NULL;

Py_CLEAR(tstate->c_profileobj);

Py_CLEAR(tstate->c_traceobj);

Py_CLEAR(tstate->coroutine_wrapper);

Py_CLEAR(tstate->async_gen_firstiter);

Py_CLEAR(tstate->async_gen_finalizer);

}

/* Common code for PyThreadState_Delete() and PyThreadState_DeleteCurrent() */

static void

tstate_delete_common(PyThreadState *tstate)

{

PyInterpreterState *interp;

if (tstate == NULL)

Py_FatalError("PyThreadState_Delete: NULL tstate");

interp = tstate->interp;

if (interp == NULL)

Py_FatalError("PyThreadState_Delete: NULL interp");

HEAD_LOCK();

if (tstate->prev)

tstate->prev->next = tstate->next;

else

interp->tstate_head = tstate->next;

if (tstate->next)

tstate->next->prev = tstate->prev;

HEAD_UNLOCK();

if (tstate->on_delete != NULL) {

tstate->on_delete(tstate->on_delete_data);

}

PyMem_RawFree(tstate);

}

void

PyThreadState_Delete(PyThreadState *tstate)

{

if (tstate == GET_TSTATE())

Py_FatalError("PyThreadState_Delete: tstate is still current");

#ifdef WITH_THREAD

if (autoInterpreterState && PyThread_get_key_value(autoTLSkey) == tstate)

PyThread_delete_key_value(autoTLSkey);

#endif /* WITH_THREAD */

tstate_delete_common(tstate);

}

#ifdef WITH_THREAD

void

PyThreadState_DeleteCurrent()

{

PyThreadState *tstate = GET_TSTATE();

if (tstate == NULL)

Py_FatalError(

"PyThreadState_DeleteCurrent: no current tstate");

tstate_delete_common(tstate);

if (autoInterpreterState && PyThread_get_key_value(autoTLSkey) == tstate)

PyThread_delete_key_value(autoTLSkey);

SET_TSTATE(NULL);

PyEval_ReleaseLock();

}

#endif /* WITH_THREAD */

/*

* Delete all thread states except the one passed as argument.

* Note that, if there is a current thread state, it *must* be the one

* passed as argument. Also, this won't touch any other interpreters

* than the current one, since we don't know which thread state should

* be kept in those other interpreteres.

*/

void

_PyThreadState_DeleteExcept(PyThreadState *tstate)

{

PyInterpreterState *interp = tstate->interp;

PyThreadState *p, *next, *garbage;

HEAD_LOCK();

/* Remove all thread states, except tstate, from the linked list of

thread states. This will allow calling PyThreadState_Clear()

without holding the lock. */

garbage = interp->tstate_head;

if (garbage == tstate)

garbage = tstate->next;

if (tstate->prev)

tstate->prev->next = tstate->next;

if (tstate->next)

tstate->next->prev = tstate->prev;

tstate->prev = tstate->next = NULL;

interp->tstate_head = tstate;

HEAD_UNLOCK();

/* Clear and deallocate all stale thread states. Even if this

executes Python code, we should be safe since it executes

in the current thread, not one of the stale threads. */

for (p = garbage; p; p = next) {

next = p->next;

PyThreadState_Clear(p);

PyMem_RawFree(p);

}

}

PyThreadState *

_PyThreadState_UncheckedGet(void)

{

return GET_TSTATE();

}

PyThreadState *

PyThreadState_Get(void)

{

PyThreadState *tstate = GET_TSTATE();

if (tstate == NULL)

Py_FatalError("PyThreadState_Get: no current thread");

return tstate;

}

PyThreadState *

PyThreadState_Swap(PyThreadState *newts)

{

PyThreadState *oldts = GET_TSTATE();

SET_TSTATE(newts);

/* It should not be possible for more than one thread state

to be used for a thread. Check this the best we can in debug

builds.

*/

#if defined(Py_DEBUG) && defined(WITH_THREAD)

if (newts) {

/* This can be called from PyEval_RestoreThread(). Similar

to it, we need to ensure errno doesn't change.

*/

int err = errno;

PyThreadState *check = PyGILState_GetThisThreadState();

if (check && check->interp == newts->interp && check != newts)

Py_FatalError("Invalid thread state for this thread");

errno = err;

}

#endif

return oldts;

}

/* An extension mechanism to store arbitrary additional per-thread state.

PyThreadState_GetDict() returns a dictionary that can be used to hold such

state; the caller should pick a unique key and store its state there. If

PyThreadState_GetDict() returns NULL, an exception has *not* been raised

and the caller should assume no per-thread state is available. */

PyObject *

PyThreadState_GetDict(void)

{

PyThreadState *tstate = GET_TSTATE();

if (tstate == NULL)

return NULL;

if (tstate->dict == NULL) {

PyObject *d;

tstate->dict = d = PyDict_New();

if (d == NULL)

PyErr_Clear();

}

return tstate->dict;

}

/* Asynchronously raise an exception in a thread.

Requested by Just van Rossum and Alex Martelli.

To prevent naive misuse, you must write your own extension

to call this, or use ctypes. Must be called with the GIL held.

Returns the number of tstates modified (normally 1, but 0 if `id` didn't

match any known thread id). Can be called with exc=NULL to clear an

existing async exception. This raises no exceptions. */

int

PyThreadState_SetAsyncExc(unsigned long id, PyObject *exc)

{

PyInterpreterState *interp = GET_INTERP_STATE();

PyThreadState *p;

/* Although the GIL is held, a few C API functions can be called

* without the GIL held, and in particular some that create and

* destroy thread and interpreter states. Those can mutate the

* list of thread states we're traversing, so to prevent that we lock

* head_mutex for the duration.

*/

HEAD_LOCK();

for (p = interp->tstate_head; p != NULL; p = p->next) {

if (p->thread_id == id) {

/* Tricky: we need to decref the current value

* (if any) in p->async_exc, but that can in turn

* allow arbitrary Python code to run, including

* perhaps calls to this function. To prevent

* deadlock, we need to release head_mutex before

* the decref.

*/

PyObject *old_exc = p->async_exc;

Py_XINCREF(exc);

p->async_exc = exc;

HEAD_UNLOCK();

Py_XDECREF(old_exc);

_PyEval_SignalAsyncExc();

return 1;

}

}

HEAD_UNLOCK();

return 0;

}

/* Routines for advanced debuggers, requested by David Beazley.

Don't use unless you know what you are doing! */

PyInterpreterState *

PyInterpreterState_Head(void)

{

return interp_head;

}

PyInterpreterState *

PyInterpreterState_Main(void)

{

return interp_main;

}

PyInterpreterState *

PyInterpreterState_Next(PyInterpreterState *interp) {

return interp->next;

}

PyThreadState *

PyInterpreterState_ThreadHead(PyInterpreterState *interp) {

return interp->tstate_head;

}

PyThreadState *

PyThreadState_Next(PyThreadState *tstate) {

return tstate->next;

}

/* The implementation of sys._current_frames(). This is intended to be

called with the GIL held, as it will be when called via

sys._current_frames(). It's possible it would work fine even without

the GIL held, but haven't thought enough about that.

*/

PyObject *

_PyThread_CurrentFrames(void)

{

PyObject *result;

PyInterpreterState *i;

result = PyDict_New();

if (result == NULL)

return NULL;

/* for i in all interpreters:

* for t in all of i's thread states:

* if t's frame isn't NULL, map t's id to its frame

* Because these lists can mutate even when the GIL is held, we

* need to grab head_mutex for the duration.

*/

HEAD_LOCK();

for (i = interp_head; i != NULL; i = i->next) {

PyThreadState *t;

for (t = i->tstate_head; t != NULL; t = t->next) {

PyObject *id;

int stat;

struct _frame *frame = t->frame;

if (frame == NULL)

continue;

id = PyLong_FromUnsignedLong(t->thread_id);

if (id == NULL)

goto Fail;

stat = PyDict_SetItem(result, id, (PyObject *)frame);

Py_DECREF(id);

if (stat < 0)

goto Fail;

}

}

HEAD_UNLOCK();

return result;

Fail:

HEAD_UNLOCK();

Py_DECREF(result);

return NULL;

}

/* Python "auto thread state" API. */

#ifdef WITH_THREAD

/* Keep this as a static, as it is not reliable! It can only

ever be compared to the state for the *current* thread.

* If not equal, then it doesn't matter that the actual

value may change immediately after comparison, as it can't

possibly change to the current thread's state.

* If equal, then the current thread holds the lock, so the value can't

change until we yield the lock.

*/

static int

PyThreadState_IsCurrent(PyThreadState *tstate)

{

/* Must be the tstate for this thread */

assert(PyGILState_GetThisThreadState()==tstate);

return tstate == GET_TSTATE();

}

/* Internal initialization/finalization functions called by

Py_Initialize/Py_FinalizeEx

*/

void

_PyGILState_Init(PyInterpreterState *i, PyThreadState *t)

{

assert(i && t); /* must init with valid states */

autoTLSkey = PyThread_create_key();

if (autoTLSkey == -1)

Py_FatalError("Could not allocate TLS entry");

autoInterpreterState = i;

assert(PyThread_get_key_value(autoTLSkey) == NULL);

assert(t->gilstate_counter == 0);

_PyGILState_NoteThreadState(t);

}

PyInterpreterState *

_PyGILState_GetInterpreterStateUnsafe(void)

{

return autoInterpreterState;

}

void

_PyGILState_Fini(void)

{

PyThread_delete_key(autoTLSkey);

autoTLSkey = -1;

autoInterpreterState = NULL;

}

/* Reset the TLS key - called by PyOS_AfterFork_Child().

* This should not be necessary, but some - buggy - pthread implementations

* don't reset TLS upon fork(), see issue #10517.

*/

void

_PyGILState_Reinit(void)

{

#ifdef WITH_THREAD

head_mutex = NULL;

HEAD_INIT();

#endif

PyThreadState *tstate = PyGILState_GetThisThreadState();

PyThread_delete_key(autoTLSkey);

if ((autoTLSkey = PyThread_create_key()) == -1)

Py_FatalError("Could not allocate TLS entry");

/* If the thread had an associated auto thread state, reassociate it with

* the new key. */

if (tstate && PyThread_set_key_value(autoTLSkey, (void *)tstate) < 0)

Py_FatalError("Couldn't create autoTLSkey mapping");

}

/* When a thread state is created for a thread by some mechanism other than

PyGILState_Ensure, it's important that the GILState machinery knows about

it so it doesn't try to create another thread state for the thread (this is

a better fix for SF bug #1010677 than the first one attempted).

*/

static void

_PyGILState_NoteThreadState(PyThreadState* tstate)

{

/* If autoTLSkey isn't initialized, this must be the very first

threadstate created in Py_Initialize(). Don't do anything for now

(we'll be back here when _PyGILState_Init is called). */

if (!autoInterpreterState)

return;

/* Stick the thread state for this thread in thread local storage.

The only situation where you can legitimately have more than one

thread state for an OS level thread is when there are multiple

interpreters.

You shouldn't really be using the PyGILState_ APIs anyway (see issues

#10915 and #15751).

The first thread state created for that given OS level thread will

"win", which seems reasonable behaviour.

*/

if (PyThread_get_key_value(autoTLSkey) == NULL) {

if (PyThread_set_key_value(autoTLSkey, (void *)tstate) < 0)

Py_FatalError("Couldn't create autoTLSkey mapping");

}

/* PyGILState_Release must not try to delete this thread state. */

tstate->gilstate_counter = 1;

}

/* The public functions */

PyThreadState *

PyGILState_GetThisThreadState(void)

{

if (autoInterpreterState == NULL)

return NULL;

return (PyThreadState *)PyThread_get_key_value(autoTLSkey);

}

int

PyGILState_Check(void)

{

PyThreadState *tstate;

if (!_PyGILState_check_enabled)

return 1;

if (autoTLSkey == -1)

return 1;

tstate = GET_TSTATE();

if (tstate == NULL)

return 0;

return (tstate == PyGILState_GetThisThreadState());

}

PyGILState_STATE

PyGILState_Ensure(void)

{

int current;

PyThreadState *tcur;

/* Note that we do not auto-init Python here - apart from

potential races with 2 threads auto-initializing, pep-311

spells out other issues. Embedders are expected to have

called Py_Initialize() and usually PyEval_InitThreads().

*/

assert(autoInterpreterState); /* Py_Initialize() hasn't been called! */

tcur = (PyThreadState *)PyThread_get_key_value(autoTLSkey);

if (tcur == NULL) {

/* At startup, Python has no concrete GIL. If PyGILState_Ensure() is

called from a new thread for the first time, we need the create the

GIL. */

PyEval_InitThreads();

/* Create a new thread state for this thread */

tcur = PyThreadState_New(autoInterpreterState);

if (tcur == NULL)

Py_FatalError("Couldn't create thread-state for new thread");

/* This is our thread state! We'll need to delete it in the

matching call to PyGILState_Release(). */

tcur->gilstate_counter = 0;

current = 0; /* new thread state is never current */

}

else

current = PyThreadState_IsCurrent(tcur);

if (current == 0)

PyEval_RestoreThread(tcur);

/* Update our counter in the thread-state - no need for locks:

- tcur will remain valid as we hold the GIL.

- the counter is safe as we are the only thread "allowed"

to modify this value

*/

++tcur->gilstate_counter;

return current ? PyGILState_LOCKED : PyGILState_UNLOCKED;

}

void

PyGILState_Release(PyGILState_STATE oldstate)

{

PyThreadState *tcur = (PyThreadState *)PyThread_get_key_value(

autoTLSkey);

if (tcur == NULL)

Py_FatalError("auto-releasing thread-state, "

"but no thread-state for this thread");

/* We must hold the GIL and have our thread state current */

/* XXX - remove the check - the assert should be fine,

but while this is very new (April 2003), the extra check

by release-only users can't hurt.

*/

if (! PyThreadState_IsCurrent(tcur))

Py_FatalError("This thread state must be current when releasing");

assert(PyThreadState_IsCurrent(tcur));

--tcur->gilstate_counter;

assert(tcur->gilstate_counter >= 0); /* illegal counter value */

/* If we're going to destroy this thread-state, we must

* clear it while the GIL is held, as destructors may run.

*/

if (tcur->gilstate_counter == 0) {

/* can't have been locked when we created it */

assert(oldstate == PyGILState_UNLOCKED);

PyThreadState_Clear(tcur);

/* Delete the thread-state. Note this releases the GIL too!

* It's vital that the GIL be held here, to avoid shutdown

* races; see bugs 225673 and 1061968 (that nasty bug has a

* habit of coming back).

*/

PyThreadState_DeleteCurrent();

}

/* Release the lock if necessary */

else if (oldstate == PyGILState_UNLOCKED)

PyEval_SaveThread();

}

#endif /* WITH_THREAD */

#ifdef __cplusplus

}

#endif