# Top-level Makefile for Python

#

# As distributed, this file is called Makefile.pre.in; it is processed

# into the real Makefile by running the script ./configure, which

# replaces things like @spam@ with values appropriate for your system.

# This means that if you edit Makefile, your changes get lost the next

# time you run the configure script. Ideally, you can do:

#

# ./configure

# make

# make test

# make install

#

# If you have a previous version of Python installed that you don't

# want to overwrite, you can use "make altinstall" instead of "make

# install". Refer to the "Installing" section in the README file for

# additional details.

#

# See also the section "Build instructions" in the README file.

# === Variables set by makesetup ===

MODOBJS= _MODOBJS_

MODLIBS= _MODLIBS_

# === Variables set by configure

VERSION= @VERSION@

srcdir= @srcdir@

VPATH= @srcdir@

CC= @CC@

CXX= @CXX@

MAINCC= @MAINCC@

LINKCC= @LINKCC@

AR= @AR@

RANLIB= @RANLIB@

READELF= @READELF@

SOABI= @SOABI@

LDVERSION= @LDVERSION@

HGVERSION= @HGVERSION@

HGTAG= @HGTAG@

HGBRANCH= @HGBRANCH@

GNULD= @GNULD@

# Shell used by make (some versions default to the login shell, which is bad)

SHELL= /bin/sh

# Use this to make a link between python$(VERSION) and python in $(BINDIR)

LN= @LN@

# Portable install script (configure doesn't always guess right)

INSTALL= @INSTALL@

INSTALL_PROGRAM=@INSTALL_PROGRAM@

INSTALL_SCRIPT= @INSTALL_SCRIPT@

INSTALL_DATA= @INSTALL_DATA@

# Shared libraries must be installed with executable mode on some systems;

# rather than figuring out exactly which, we always give them executable mode.

# Also, making them read-only seems to be a good idea...

INSTALL_SHARED= ${INSTALL} -m 555

MKDIR_P= @MKDIR_P@

MAKESETUP= $(srcdir)/Modules/makesetup

# Compiler options

OPT= @OPT@

BASECFLAGS= @BASECFLAGS@

CONFIGURE_CFLAGS= @CFLAGS@

CONFIGURE_CPPFLAGS= @CPPFLAGS@

CONFIGURE_LDFLAGS= @LDFLAGS@

# Avoid assigning CFLAGS, LDFLAGS, etc. so users can use them on the

# command line to append to these values without stomping the pre-set

# values.

PY_CFLAGS= $(BASECFLAGS) $(OPT) $(CONFIGURE_CFLAGS) $(CFLAGS) $(EXTRA_CFLAGS)

# Both CPPFLAGS and LDFLAGS need to contain the shell's value for setup.py to

# be able to build extension modules using the directories specified in the

# environment variables

PY_CPPFLAGS= -I. -I$(srcdir)/Include $(CONFIGURE_CPPFLAGS) $(CPPFLAGS)

PY_LDFLAGS= $(CONFIGURE_LDFLAGS) $(LDFLAGS)

NO_AS_NEEDED= @NO_AS_NEEDED@

LDLAST= @LDLAST@

SGI_ABI= @SGI_ABI@

CCSHARED= @CCSHARED@

LINKFORSHARED= @LINKFORSHARED@

ARFLAGS= @ARFLAGS@

# Extra C flags added for building the interpreter object files.

CFLAGSFORSHARED=@CFLAGSFORSHARED@

# C flags used for building the interpreter object files

PY_CORE_CFLAGS= $(PY_CFLAGS) $(PY_CPPFLAGS) $(CFLAGSFORSHARED) -DPy_BUILD_CORE

# Machine-dependent subdirectories

MACHDEP= @MACHDEP@

# Install prefix for architecture-independent files

prefix= @prefix@

# Install prefix for architecture-dependent files

exec_prefix= @exec_prefix@

# Install prefix for data files

datarootdir= @datarootdir@

# Expanded directories

BINDIR= @bindir@

LIBDIR= @libdir@

MANDIR= @mandir@

INCLUDEDIR= @includedir@

CONFINCLUDEDIR= $(exec_prefix)/include

SCRIPTDIR= $(prefix)/lib

ABIFLAGS= @ABIFLAGS@

# Detailed destination directories

BINLIBDEST= $(LIBDIR)/python$(VERSION)

LIBDEST= $(SCRIPTDIR)/python$(VERSION)

INCLUDEPY= $(INCLUDEDIR)/python$(LDVERSION)

CONFINCLUDEPY= $(CONFINCLUDEDIR)/python$(LDVERSION)

# Symbols used for using shared libraries

SO= @SO@

LDSHARED= @LDSHARED@ $(PY_LDFLAGS)

BLDSHARED= @BLDSHARED@ $(PY_LDFLAGS)

LDCXXSHARED= @LDCXXSHARED@

DESTSHARED= $(BINLIBDEST)/lib-dynload

# Executable suffix (.exe on Windows and Mac OS X)

EXE= @EXEEXT@

BUILDEXE= @BUILDEXEEXT@

# Short name and location for Mac OS X Python framework

UNIVERSALSDK=@UNIVERSALSDK@

PYTHONFRAMEWORK= @PYTHONFRAMEWORK@

PYTHONFRAMEWORKDIR= @PYTHONFRAMEWORKDIR@

PYTHONFRAMEWORKPREFIX= @PYTHONFRAMEWORKPREFIX@

PYTHONFRAMEWORKINSTALLDIR= @PYTHONFRAMEWORKINSTALLDIR@

# Deployment target selected during configure, to be checked

# by distutils. The export statement is needed to ensure that the

# deployment target is active during build.

MACOSX_DEPLOYMENT_TARGET=@CONFIGURE_MACOSX_DEPLOYMENT_TARGET@

@EXPORT_MACOSX_DEPLOYMENT_TARGET@export MACOSX_DEPLOYMENT_TARGET

# Options to enable prebinding (for fast startup prior to Mac OS X 10.3)

OTHER_LIBTOOL_OPT=@OTHER_LIBTOOL_OPT@

# Environment to run shared python without installed libraries

RUNSHARED= @RUNSHARED@

# Modes for directories, executables and data files created by the

# install process. Default to user-only-writable for all file types.

DIRMODE= 755

EXEMODE= 755

FILEMODE= 644

# configure script arguments

CONFIG_ARGS= @CONFIG_ARGS@

# Subdirectories with code

SRCDIRS= @SRCDIRS@

# Other subdirectories

SUBDIRSTOO= Include Lib Misc

# Files and directories to be distributed

CONFIGFILES= configure configure.ac acconfig.h pyconfig.h.in Makefile.pre.in

DISTFILES= README ChangeLog $(CONFIGFILES)

DISTDIRS= $(SUBDIRS) $(SUBDIRSTOO) Ext-dummy

DIST= $(DISTFILES) $(DISTDIRS)

LIBRARY= @LIBRARY@

LDLIBRARY= @LDLIBRARY@

BLDLIBRARY= @BLDLIBRARY@

PY3LIBRARY= @PY3LIBRARY@

DLLLIBRARY= @DLLLIBRARY@

LDLIBRARYDIR= @LDLIBRARYDIR@

INSTSONAME= @INSTSONAME@

LIBS= @LIBS@

LIBM= @LIBM@

LIBC= @LIBC@

SYSLIBS= $(LIBM) $(LIBC)

SHLIBS= @SHLIBS@

THREADOBJ= @THREADOBJ@

DLINCLDIR= @DLINCLDIR@

DYNLOADFILE= @DYNLOADFILE@

MACHDEP_OBJS= @MACHDEP_OBJS@

LIBOBJDIR= Python/

LIBOBJS= @LIBOBJS@

PYTHON= python$(EXE)

BUILDPYTHON= python$(BUILDEXE)

# The task to run while instrument when building the profile-opt target

PROFILE_TASK= $(srcdir)/Tools/pybench/pybench.py -n 2 --with-gc --with-syscheck

#PROFILE_TASK= $(srcdir)/Lib/test/regrtest.py

# === Definitions added by makesetup ===

##########################################################################

# Modules

MODULE_OBJS= \

Modules/config.o \

Modules/getpath.o \

Modules/main.o \

Modules/gcmodule.o

# Used of signalmodule.o is not available

SIGNAL_OBJS= @SIGNAL_OBJS@

IO_H= Modules/_io/_iomodule.h

IO_OBJS= \

Modules/_io/_iomodule.o \

Modules/_io/iobase.o \

Modules/_io/fileio.o \

Modules/_io/bufferedio.o \

Modules/_io/textio.o \

Modules/_io/bytesio.o \

Modules/_io/stringio.o

##########################################################################

# Grammar

GRAMMAR_H= $(srcdir)/Include/graminit.h

GRAMMAR_C= $(srcdir)/Python/graminit.c

GRAMMAR_INPUT= $(srcdir)/Grammar/Grammar

LIBFFI_INCLUDEDIR= @LIBFFI_INCLUDEDIR@

##########################################################################

# Parser

PGEN= Parser/pgen$(EXE)

PSRCS= \

Parser/acceler.c \

Parser/grammar1.c \

Parser/listnode.c \

Parser/node.c \

Parser/parser.c \

Parser/bitset.c \

Parser/metagrammar.c \

Parser/firstsets.c \

Parser/grammar.c \

Parser/pgen.c

POBJS= \

Parser/acceler.o \

Parser/grammar1.o \

Parser/listnode.o \

Parser/node.o \

Parser/parser.o \

Parser/bitset.o \

Parser/metagrammar.o \

Parser/firstsets.o \

Parser/grammar.o \

Parser/pgen.o

PARSER_OBJS= $(POBJS) Parser/myreadline.o Parser/parsetok.o Parser/tokenizer.o

PGSRCS= \

Objects/obmalloc.c \

Python/dynamic_annotations.c \

Python/mysnprintf.c \

Python/pyctype.c \

Parser/tokenizer_pgen.c \

Parser/printgrammar.c \

Parser/parsetok_pgen.c \

Parser/pgenmain.c

PGOBJS= \

Objects/obmalloc.o \

Python/dynamic_annotations.o \

Python/mysnprintf.o \

Python/pyctype.o \

Parser/tokenizer_pgen.o \

Parser/printgrammar.o \

Parser/parsetok_pgen.o \

Parser/pgenmain.o

PARSER_HEADERS= \

$(srcdir)/Parser/parser.h \

$(srcdir)/Include/parsetok.h \

$(srcdir)/Parser/tokenizer.h

PGENSRCS= $(PSRCS) $(PGSRCS)

PGENOBJS= $(POBJS) $(PGOBJS)

##########################################################################

# AST

AST_H_DIR= $(srcdir)/Include

AST_H= $(AST_H_DIR)/Python-ast.h

AST_C_DIR= $(srcdir)/Python

AST_C= $(AST_C_DIR)/Python-ast.c

AST_ASDL= $(srcdir)/Parser/Python.asdl

ASDLGEN_FILES= $(srcdir)/Parser/asdl.py $(srcdir)/Parser/asdl_c.py

# XXX Note that a build now requires Python exist before the build starts

ASDLGEN= @DISABLE_ASDLGEN@ $(srcdir)/Parser/asdl_c.py

##########################################################################

# Python

OPCODETARGETS_H= \

$(srcdir)/Python/opcode_targets.h

OPCODETARGETGEN= \

$(srcdir)/Python/makeopcodetargets.py

OPCODETARGETGEN_FILES= \

$(OPCODETARGETGEN) $(srcdir)/Lib/opcode.py

PYTHON_OBJS= \

Python/_warnings.o \

Python/Python-ast.o \

Python/asdl.o \

Python/ast.o \

Python/bltinmodule.o \

Python/ceval.o \

Python/compile.o \

Python/codecs.o \

Python/dynamic_annotations.o \

Python/errors.o \

Python/frozenmain.o \

Python/future.o \

Python/getargs.o \

Python/getcompiler.o \

Python/getcopyright.o \

Python/getplatform.o \

Python/getversion.o \

Python/graminit.o \

Python/import.o \

Python/importdl.o \

Python/marshal.o \

Python/modsupport.o \

Python/mystrtoul.o \

Python/mysnprintf.o \

Python/peephole.o \

Python/pyarena.o \

Python/pyctype.o \

Python/pyfpe.o \

Python/pymath.o \

Python/pystate.o \

Python/pythonrun.o \

Python/pytime.o \

Python/random.o \

Python/structmember.o \

Python/symtable.o \

Python/sysmodule.o \

Python/traceback.o \

Python/getopt.o \

Python/pystrcmp.o \

Python/pystrtod.o \

Python/dtoa.o \

Python/formatter_unicode.o \

Python/fileutils.o \

Python/$(DYNLOADFILE) \

$(LIBOBJS) \

$(MACHDEP_OBJS) \

$(THREADOBJ)

##########################################################################

# Objects

OBJECT_OBJS= \

Objects/abstract.o \

Objects/accu.o \

Objects/boolobject.o \

Objects/bytes_methods.o \

Objects/bytearrayobject.o \

Objects/bytesobject.o \

Objects/cellobject.o \

Objects/classobject.o \

Objects/codeobject.o \

Objects/complexobject.o \

Objects/descrobject.o \

Objects/enumobject.o \

Objects/exceptions.o \

Objects/genobject.o \

Objects/fileobject.o \

Objects/floatobject.o \

Objects/frameobject.o \

Objects/funcobject.o \

Objects/iterobject.o \

Objects/listobject.o \

Objects/longobject.o \

Objects/dictobject.o \

Objects/memoryobject.o \

Objects/methodobject.o \

Objects/moduleobject.o \

Objects/namespaceobject.o \

Objects/object.o \

Objects/obmalloc.o \

Objects/capsule.o \

Objects/rangeobject.o \

Objects/setobject.o \

Objects/sliceobject.o \

Objects/structseq.o \

Objects/tupleobject.o \

Objects/typeobject.o \

Objects/unicodeobject.o \

Objects/unicodectype.o \

Objects/weakrefobject.o

SYSCONFIGDATA=$(srcdir)/Lib/_sysconfigdata.py

##########################################################################

# objects that get linked into the Python library

LIBRARY_OBJS_OMIT_FROZEN= \

Modules/getbuildinfo.o \

$(PARSER_OBJS) \

$(OBJECT_OBJS) \

$(PYTHON_OBJS) \

$(MODULE_OBJS) \

$(SIGNAL_OBJS) \

$(MODOBJS)

LIBRARY_OBJS= \

$(LIBRARY_OBJS_OMIT_FROZEN) \

Python/frozen.o

#########################################################################

# Rules

# Default target

all: build_all

build_all: $(BUILDPYTHON) $(SYSCONFIGDATA) oldsharedmods sharedmods gdbhooks Modules/_testembed

# Compile a binary with gcc profile guided optimization.

profile-opt:

@echo "Building with support for profile generation:"

$(MAKE) clean

$(MAKE) build_all_generate_profile

@echo "Running benchmark to generate profile data:"

$(MAKE) profile-removal

$(MAKE) run_profile_task

@echo "Rebuilding with profile guided optimizations:"

$(MAKE) clean

$(MAKE) build_all_use_profile

build_all_generate_profile:

$(MAKE) all CFLAGS="$(CFLAGS) -fprofile-generate" LIBS="$(LIBS) -lgcov"

run_profile_task:

$(RUNSHARED) ./$(BUILDPYTHON) $(PROFILE_TASK)

build_all_use_profile:

$(MAKE) all CFLAGS="$(CFLAGS) -fprofile-use -fprofile-correction"

coverage:

@echo "Building with support for coverage checking:"

$(MAKE) clean

$(MAKE) all CFLAGS="$(CFLAGS) -O0 -pg -fprofile-arcs -ftest-coverage" LIBS="$(LIBS) -lgcov"

# Build the interpreter

$(BUILDPYTHON): Modules/python.o $(LIBRARY) $(LDLIBRARY) $(PY3LIBRARY)

$(LINKCC) $(PY_LDFLAGS) $(LINKFORSHARED) -o $@ Modules/python.o $(BLDLIBRARY) $(LIBS) $(MODLIBS) $(SYSLIBS) $(LDLAST)

platform: $(BUILDPYTHON) $(SYSCONFIGDATA)

$(RUNSHARED) ./$(BUILDPYTHON) -E -c 'import sys ; from sysconfig import get_platform ; print(get_platform()+"-"+sys.version[0:3])' >platform

# Generate the sysconfig build-time data

$(SYSCONFIGDATA): $(BUILDPYTHON)

$(RUNSHARED) ./$(BUILDPYTHON) -SE -m sysconfig --generate-posix-vars

# Build the shared modules

sharedmods: $(BUILDPYTHON) $(SYSCONFIGDATA)

@case $$MAKEFLAGS in \

*s*) $(RUNSHARED) CC='$(CC)' LDSHARED='$(BLDSHARED)' OPT='$(OPT)' ./$(BUILDPYTHON) -E $(srcdir)/setup.py -q build;; \

*) $(RUNSHARED) CC='$(CC)' LDSHARED='$(BLDSHARED)' OPT='$(OPT)' ./$(BUILDPYTHON) -E $(srcdir)/setup.py build;; \

esac

# Build static library

# avoid long command lines, same as LIBRARY_OBJS

$(LIBRARY): $(LIBRARY_OBJS)

-rm -f $@

$(AR) $(ARFLAGS) $@ Modules/getbuildinfo.o

$(AR) $(ARFLAGS) $@ $(PARSER_OBJS)

$(AR) $(ARFLAGS) $@ $(OBJECT_OBJS)

$(AR) $(ARFLAGS) $@ $(PYTHON_OBJS) Python/frozen.o

$(AR) $(ARFLAGS) $@ $(MODULE_OBJS) $(SIGNAL_OBJS)

$(AR) $(ARFLAGS) $@ $(MODOBJS)

$(RANLIB) $@

libpython$(LDVERSION).so: $(LIBRARY_OBJS)

if test $(INSTSONAME) != $(LDLIBRARY); then \

$(BLDSHARED) -Wl,-h$(INSTSONAME) -o $(INSTSONAME) $(LIBRARY_OBJS) $(MODLIBS) $(SHLIBS) $(LIBC) $(LIBM) $(LDLAST); \

$(LN) -f $(INSTSONAME) $@; \

else \

$(BLDSHARED) -o $@ $(LIBRARY_OBJS) $(MODLIBS) $(SHLIBS) $(LIBC) $(LIBM) $(LDLAST); \

fi

libpython3.so: libpython$(LDVERSION).so

$(BLDSHARED) $(NO_AS_NEEDED) -o $@ -Wl,-h$@ $^

libpython$(LDVERSION).dylib: $(LIBRARY_OBJS)

$(CC) -dynamiclib -Wl,-single_module $(PY_LDFLAGS) -undefined dynamic_lookup -Wl,-install_name,$(prefix)/lib/libpython$(LDVERSION).dylib -Wl,-compatibility_version,$(VERSION) -Wl,-current_version,$(VERSION) -o $@ $(LIBRARY_OBJS) $(SHLIBS) $(LIBC) $(LIBM) $(LDLAST); \

libpython$(VERSION).sl: $(LIBRARY_OBJS)

$(LDSHARED) -o $@ $(LIBRARY_OBJS) $(MODLIBS) $(SHLIBS) $(LIBC) $(LIBM) $(LDLAST)

# Copy up the gdb python hooks into a position where they can be automatically

# loaded by gdb during Lib/test/test_gdb.py

#

# Distributors are likely to want to install this somewhere else e.g. relative

# to the stripped DWARF data for the shared library.

gdbhooks: $(BUILDPYTHON)-gdb.py

SRC_GDB_HOOKS=$(srcdir)/Tools/gdb/libpython.py

$(BUILDPYTHON)-gdb.py: $(SRC_GDB_HOOKS)

$(INSTALL_DATA) $(SRC_GDB_HOOKS) $(BUILDPYTHON)-gdb.py

# This rule is here for OPENSTEP/Rhapsody/MacOSX. It builds a temporary

# minimal framework (not including the Lib directory and such) in the current

# directory.

RESSRCDIR=Mac/Resources/framework

$(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)/$(PYTHONFRAMEWORK): \

$(LIBRARY) \

$(RESSRCDIR)/Info.plist

$(INSTALL) -d -m $(DIRMODE) $(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)

$(CC) -o $(LDLIBRARY) $(PY_LDFLAGS) -dynamiclib \

-all_load $(LIBRARY) -Wl,-single_module \

-install_name $(DESTDIR)$(PYTHONFRAMEWORKINSTALLDIR)/Versions/$(VERSION)/$(PYTHONFRAMEWORK) \

-compatibility_version $(VERSION) \

-current_version $(VERSION) \

-framework CoreFoundation $(LIBS);

$(INSTALL) -d -m $(DIRMODE) \

$(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)/Resources/English.lproj

$(INSTALL_DATA) $(RESSRCDIR)/Info.plist \

$(PYTHONFRAMEWORKDIR)/Versions/$(VERSION)/Resources/Info.plist

$(LN) -fsn $(VERSION) $(PYTHONFRAMEWORKDIR)/Versions/Current

$(LN) -fsn Versions/Current/$(PYTHONFRAMEWORK) $(PYTHONFRAMEWORKDIR)/$(PYTHONFRAMEWORK)

$(LN) -fsn Versions/Current/Resources $(PYTHONFRAMEWORKDIR)/Resources

# This rule builds the Cygwin Python DLL and import library if configured

# for a shared core library; otherwise, this rule is a noop.

$(DLLLIBRARY) libpython$(VERSION).dll.a: $(LIBRARY_OBJS)

if test -n "$(DLLLIBRARY)"; then \

$(LDSHARED) -Wl,--out-implib=$@ -o $(DLLLIBRARY) $^ \

$(LIBS) $(MODLIBS) $(SYSLIBS) $(LDLAST); \

else true; \

fi

oldsharedmods: $(SHAREDMODS)

Makefile Modules/config.c: Makefile.pre \

$(srcdir)/Modules/config.c.in \

$(MAKESETUP) \

Modules/Setup.config \

Modules/Setup \

Modules/Setup.local

$(SHELL) $(MAKESETUP) -c $(srcdir)/Modules/config.c.in \

-s Modules \

Modules/Setup.config \

Modules/Setup.local \

Modules/Setup

@mv config.c Modules

@echo "The Makefile was updated, you may need to re-run make."

Modules/Setup: $(srcdir)/Modules/Setup.dist

@if test -f Modules/Setup; then \

echo "-----------------------------------------------"; \

echo "Modules/Setup.dist is newer than Modules/Setup;"; \

echo "check to make sure you have all the updates you"; \

echo "need in your Modules/Setup file."; \

echo "Usually, copying Modules/Setup.dist to Modules/Setup will work."; \

echo "-----------------------------------------------"; \

fi

Modules/_testembed: Modules/_testembed.o $(LIBRARY) $(LDLIBRARY) $(PY3LIBRARY)

$(LINKCC) $(PY_LDFLAGS) $(LINKFORSHARED) -o $@ Modules/_testembed.o $(BLDLIBRARY) $(LIBS) $(MODLIBS) $(SYSLIBS) $(LDLAST)

############################################################################

# Importlib

Modules/_freeze_importlib: Modules/_freeze_importlib.o $(LIBRARY_OBJS_OMIT_FROZEN)

$(LINKCC) $(PY_LDFLAGS) -o $@ Modules/_freeze_importlib.o $(LIBRARY_OBJS_OMIT_FROZEN) $(LIBS) $(MODLIBS) $(SYSLIBS) $(LDLAST)

Python/importlib.h: $(srcdir)/Lib/importlib/_bootstrap.py Modules/_freeze_importlib.c

$(MAKE) Modules/_freeze_importlib

./Modules/_freeze_importlib \

$(srcdir)/Lib/importlib/_bootstrap.py Python/importlib.h

############################################################################

# Special rules for object files

Modules/getbuildinfo.o: $(PARSER_OBJS) \

$(OBJECT_OBJS) \

$(PYTHON_OBJS) \

$(MODULE_OBJS) \

$(SIGNAL_OBJS) \

$(MODOBJS) \

$(srcdir)/Modules/getbuildinfo.c

$(CC) -c $(PY_CORE_CFLAGS) \

-DHGVERSION="\"`LC_ALL=C $(HGVERSION)`\"" \

-DHGTAG="\"`LC_ALL=C $(HGTAG)`\"" \

-DHGBRANCH="\"`LC_ALL=C $(HGBRANCH)`\"" \

-o $@ $(srcdir)/Modules/getbuildinfo.c

Modules/getpath.o: $(srcdir)/Modules/getpath.c Makefile

$(CC) -c $(PY_CORE_CFLAGS) -DPYTHONPATH='"$(PYTHONPATH)"' \

-DPREFIX='"$(prefix)"' \

-DEXEC_PREFIX='"$(exec_prefix)"' \

-DVERSION='"$(VERSION)"' \

-DVPATH='"$(VPATH)"' \

-o $@ $(srcdir)/Modules/getpath.c

Modules/python.o: $(srcdir)/Modules/python.c

$(MAINCC) -c $(PY_CORE_CFLAGS) -o $@ $(srcdir)/Modules/python.c

Modules/_testembed.o: $(srcdir)/Modules/_testembed.c

$(MAINCC) -c $(PY_CORE_CFLAGS) -o $@ $(srcdir)/Modules/_testembed.c

Python/dynload_shlib.o: $(srcdir)/Python/dynload_shlib.c Makefile

$(CC) -c $(PY_CORE_CFLAGS) \

-DSOABI='"$(SOABI)"' \

-o $@ $(srcdir)/Python/dynload_shlib.c

Python/sysmodule.o: $(srcdir)/Python/sysmodule.c Makefile

$(CC) -c $(PY_CORE_CFLAGS) \

-DABIFLAGS='"$(ABIFLAGS)"' \

-o $@ $(srcdir)/Python/sysmodule.c

$(IO_OBJS): $(IO_H)

$(GRAMMAR_H): $(GRAMMAR_INPUT) $(PGENSRCS)

@$(MKDIR_P) Include

$(MAKE) $(PGEN)

$(PGEN) $(GRAMMAR_INPUT) $(GRAMMAR_H) $(GRAMMAR_C)

$(GRAMMAR_C): $(GRAMMAR_H) $(GRAMMAR_INPUT) $(PGENSRCS)

$(MAKE) $(GRAMMAR_H)

touch $(GRAMMAR_C)

$(PGEN): $(PGENOBJS)

$(CC) $(OPT) $(PY_LDFLAGS) $(PGENOBJS) $(LIBS) -o $(PGEN)

Parser/grammar.o: $(srcdir)/Parser/grammar.c \

$(srcdir)/Include/token.h \

$(srcdir)/Include/grammar.h

Parser/metagrammar.o: $(srcdir)/Parser/metagrammar.c

Parser/tokenizer_pgen.o: $(srcdir)/Parser/tokenizer.c

Parser/parsetok_pgen.o: $(srcdir)/Parser/parsetok.c

Parser/printgrammar.o: $(srcdir)/Parser/printgrammar.c

Parser/pgenmain.o: $(srcdir)/Include/parsetok.h

$(AST_H): $(AST_ASDL) $(ASDLGEN_FILES)

$(ASDLGEN) -h $(AST_H_DIR) $(AST_ASDL)

$(AST_C): $(AST_H) $(AST_ASDL) $(ASDLGEN_FILES)

$(ASDLGEN) -c $(AST_C_DIR) $(AST_ASDL)

Python/compile.o Python/symtable.o Python/ast.o: $(GRAMMAR_H) $(AST_H)

Python/getplatform.o: $(srcdir)/Python/getplatform.c

$(CC) -c $(PY_CORE_CFLAGS) -DPLATFORM='"$(MACHDEP)"' -o $@ $(srcdir)/Python/getplatform.c

Python/importdl.o: $(srcdir)/Python/importdl.c

$(CC) -c $(PY_CORE_CFLAGS) -I$(DLINCLDIR) -o $@ $(srcdir)/Python/importdl.c

Objects/unicodectype.o: $(srcdir)/Objects/unicodectype.c \

$(srcdir)/Objects/unicodetype_db.h

BYTESTR_DEPS = \

$(srcdir)/Include/bytes_methods.h \

$(srcdir)/Objects/stringlib/count.h \

$(srcdir)/Objects/stringlib/ctype.h \

$(srcdir)/Objects/stringlib/eq.h \

$(srcdir)/Objects/stringlib/fastsearch.h \

$(srcdir)/Objects/stringlib/find.h \

$(srcdir)/Objects/stringlib/find_max_char.h \

$(srcdir)/Objects/stringlib/partition.h \

$(srcdir)/Objects/stringlib/split.h \

$(srcdir)/Objects/stringlib/stringdefs.h \

$(srcdir)/Objects/stringlib/transmogrify.h \

$(srcdir)/Objects/stringlib/unicodedefs.h \

$(srcdir)/Objects/stringlib/localeutil.h \

$(srcdir)/Objects/stringlib/undef.h

UNICODE_DEPS = $(BYTESTR_DEPS) \

$(srcdir)/Objects/stringlib/asciilib.h \

$(srcdir)/Objects/stringlib/codecs.h \

$(srcdir)/Objects/stringlib/ucs1lib.h \

$(srcdir)/Objects/stringlib/ucs2lib.h \

$(srcdir)/Objects/stringlib/ucs4lib.h \

$(srcdir)/Objects/stringlib/unicode_format.h \

$(srcdir)/Objects/stringlib/unicodedefs.h

Objects/bytesobject.o: $(srcdir)/Objects/bytesobject.c $(BYTESTR_DEPS)

Objects/bytearrayobject.o: $(srcdir)/Objects/bytearrayobject.c $(BYTESTR_DEPS)

Objects/unicodeobject.o: $(srcdir)/Objects/unicodeobject.c $(UNICODE_DEPS)

Objects/dictobject.o: $(srcdir)/Objects/stringlib/eq.h

Objects/setobject.o: $(srcdir)/Objects/stringlib/eq.h

$(OPCODETARGETS_H): $(OPCODETARGETGEN_FILES)

$(OPCODETARGETGEN) $(OPCODETARGETS_H)

Python/ceval.o: $(OPCODETARGETS_H) $(srcdir)/Python/ceval_gil.h

Python/formatter_unicode.o: $(srcdir)/Python/formatter_unicode.c \

$(BYTESTR_DEPS)

Python/frozen.o: $(srcdir)/Python/importlib.h

Objects/typeobject.o: $(srcdir)/Objects/typeslots.inc

$(srcdir)/Objects/typeslots.inc: $(srcdir)/Include/typeslots.h $(srcdir)/Objects/typeslots.py

$(PYTHON) $(srcdir)/Objects/typeslots.py < $(srcdir)/Include/typeslots.h > $(srcdir)/Objects/typeslots.inc

############################################################################

# Header files

PYTHON_HEADERS= \

$(srcdir)/Include/Python.h \

$(srcdir)/Include/abstract.h \

$(srcdir)/Include/accu.h \

$(srcdir)/Include/asdl.h \

$(srcdir)/Include/ast.h \

$(srcdir)/Include/bltinmodule.h \

$(srcdir)/Include/bitset.h \

$(srcdir)/Include/boolobject.h \

$(srcdir)/Include/bytes_methods.h \

$(srcdir)/Include/bytearrayobject.h \

$(srcdir)/Include/bytesobject.h \

$(srcdir)/Include/cellobject.h \

$(srcdir)/Include/ceval.h \

$(srcdir)/Include/classobject.h \

$(srcdir)/Include/code.h \

$(srcdir)/Include/codecs.h \

$(srcdir)/Include/compile.h \

$(srcdir)/Include/complexobject.h \

$(srcdir)/Include/descrobject.h \

$(srcdir)/Include/dictobject.h \

$(srcdir)/Include/dtoa.h \

$(srcdir)/Include/dynamic_annotations.h \

$(srcdir)/Include/enumobject.h \

$(srcdir)/Include/errcode.h \

$(srcdir)/Include/eval.h \

$(srcdir)/Include/fileobject.h \

$(srcdir)/Include/fileutils.h \

$(srcdir)/Include/floatobject.h \

$(srcdir)/Include/frameobject.h \

$(srcdir)/Include/funcobject.h \

$(srcdir)/Include/genobject.h \

$(srcdir)/Include/import.h \

$(srcdir)/Include/intrcheck.h \

$(srcdir)/Include/iterobject.h \

$(srcdir)/Include/listobject.h \

$(srcdir)/Include/longintrepr.h \

$(srcdir)/Include/longobject.h \

$(srcdir)/Include/marshal.h \

$(srcdir)/Include/memoryobject.h \

$(srcdir)/Include/metagrammar.h \

$(srcdir)/Include/methodobject.h \

$(srcdir)/Include/modsupport.h \

$(srcdir)/Include/moduleobject.h \

$(srcdir)/Include/namespaceobject.h \

$(srcdir)/Include/node.h \

$(srcdir)/Include/object.h \

$(srcdir)/Include/objimpl.h \

$(srcdir)/Include/opcode.h \

$(srcdir)/Include/osdefs.h \

$(srcdir)/Include/patchlevel.h \

$(srcdir)/Include/pgen.h \

$(srcdir)/Include/pgenheaders.h \

$(srcdir)/Include/pyarena.h \

$(srcdir)/Include/pyatomic.h \

$(srcdir)/Include/pycapsule.h \

$(srcdir)/Include/pyctype.h \

$(srcdir)/Include/pydebug.h \

$(srcdir)/Include/pyerrors.h \

$(srcdir)/Include/pyfpe.h \

$(srcdir)/Include/pymath.h \

$(srcdir)/Include/pygetopt.h \

$(srcdir)/Include/pymacro.h \

$(srcdir)/Include/pymem.h \

$(srcdir)/Include/pyport.h \

$(srcdir)/Include/pystate.h \

$(srcdir)/Include/pystrcmp.h \

$(srcdir)/Include/pystrtod.h \

$(srcdir)/Include/pythonrun.h \

$(srcdir)/Include/pythread.h \

$(srcdir)/Include/pytime.h \

$(srcdir)/Include/rangeobject.h \

$(srcdir)/Include/setobject.h \

$(srcdir)/Include/sliceobject.h \

$(srcdir)/Include/structmember.h \

$(srcdir)/Include/structseq.h \

$(srcdir)/Include/symtable.h \

$(srcdir)/Include/sysmodule.h \

$(srcdir)/Include/traceback.h \

$(srcdir)/Include/tupleobject.h \

$(srcdir)/Include/ucnhash.h \

$(srcdir)/Include/unicodeobject.h \

$(srcdir)/Include/warnings.h \

$(srcdir)/Include/weakrefobject.h \

pyconfig.h \

$(PARSER_HEADERS)

$(LIBRARY_OBJS) $(MODOBJS) Modules/python.o: $(PYTHON_HEADERS)

######################################################################

TESTOPTS= $(EXTRATESTOPTS)

TESTPYTHON= $(RUNSHARED) ./$(BUILDPYTHON) $(TESTPYTHONOPTS)

TESTRUNNER= $(TESTPYTHON) $(srcdir)/Tools/scripts/run_tests.py

TESTTIMEOUT= 3600

# Run a basic set of regression tests.

# This excludes some tests that are particularly resource-intensive.

test: all platform

$(TESTRUNNER) $(TESTOPTS)

# Run the full test suite twice - once without .pyc files, and once with.

# In the past, we've had problems where bugs in the marshalling or

# elsewhere caused bytecode read from .pyc files to behave differently

# than bytecode generated directly from a .py source file. Sometimes

# the bytecode read from a .pyc file had the bug, sometimes the directly

# generated bytecode. This is sometimes a very shy bug needing a lot of

# sample data.

testall: all platform

-find $(srcdir)/Lib -name '*.py[co]' -print | xargs rm -f

$(TESTPYTHON) -E $(srcdir)/Lib/compileall.py

-find $(srcdir)/Lib -name '*.py[co]' -print | xargs rm -f

-$(TESTRUNNER) -u all $(TESTOPTS)

$(TESTRUNNER) -u all $(TESTOPTS)

# Run the test suite for both architectures in a Universal build on OSX.

# Must be run on an Intel box.

testuniversal: all platform

if [ `arch` != 'i386' ];then \

echo "This can only be used on OSX/i386" ;\

exit 1 ;\

fi

$(TESTRUNNER) -u all $(TESTOPTS)

$(RUNSHARED) /usr/libexec/oah/translate \

./$(BUILDPYTHON) -E -m test -j 0 -u all $(TESTOPTS)

# Like testall, but with only one pass and without multiple processes.

# Run an optional script to include information about the build environment.

buildbottest: all platform

-@if which pybuildbot.identify >/dev/null 2>&1; then \

pybuildbot.identify "CC='$(CC)'" "CXX='$(CXX)'"; \

fi

$(TESTRUNNER) -j 1 -u all -W --timeout=$(TESTTIMEOUT) $(TESTOPTS)

QUICKTESTOPTS= $(TESTOPTS) -x test_subprocess test_io test_lib2to3 \

test_multibytecodec test_urllib2_localnet test_itertools \

test_multiprocessing test_mailbox test_socket test_poll \

test_select test_zipfile test_concurrent_futures

quicktest: all platform

$(TESTRUNNER) $(QUICKTESTOPTS)

install: altinstall bininstall

altinstall: @FRAMEWORKALTINSTALLFIRST@ altbininstall libinstall inclinstall libainstall \

sharedinstall oldsharedinstall maninstall @FRAMEWORKALTINSTALLLAST@

# Install shared libraries enabled by Setup

DESTDIRS= $(exec_prefix) $(LIBDIR) $(BINLIBDEST) $(DESTSHARED)

oldsharedinstall: $(DESTSHARED) $(SHAREDMODS)

@for i in X $(SHAREDMODS); do \

if test $$i != X; then \

echo $(INSTALL_SHARED) $$i $(DESTSHARED)/`basename $$i`; \

$(INSTALL_SHARED) $$i $(DESTDIR)$(DESTSHARED)/`basename $$i`; \

fi; \

done

$(DESTSHARED):

@for i in $(DESTDIRS); \

do \

if test ! -d $(DESTDIR)$$i; then \

echo "Creating directory $$i"; \

$(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \

else true; \

fi; \

done

# Install the interpreter with $(VERSION) affixed

# This goes into $(exec_prefix)

altbininstall: $(BUILDPYTHON)

@for i in $(BINDIR) $(LIBDIR); \

do \

if test ! -d $(DESTDIR)$$i; then \

echo "Creating directory $$i"; \

$(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \

else true; \

fi; \

done

$(INSTALL_PROGRAM) $(BUILDPYTHON) $(DESTDIR)$(BINDIR)/python$(LDVERSION)$(EXE)

-if test "$(VERSION)" != "$(LDVERSION)"; then \

if test -f $(DESTDIR)$(BINDIR)/python$(VERSION)$(EXE) -o -h $(DESTDIR)$(BINDIR)/python$(VERSION)$(EXE); \

then rm -f $(DESTDIR)$(BINDIR)/python$(VERSION)$(EXE); \

fi; \

(cd $(DESTDIR)$(BINDIR); $(LN) python$(LDVERSION)$(EXE) python$(VERSION)$(EXE)); \

fi

if test -f $(LDLIBRARY); then \

if test -n "$(DLLLIBRARY)" ; then \

$(INSTALL_SHARED) $(DLLLIBRARY) $(DESTDIR)$(BINDIR); \

else \

$(INSTALL_SHARED) $(LDLIBRARY) $(DESTDIR)$(LIBDIR)/$(INSTSONAME); \

if test $(LDLIBRARY) != $(INSTSONAME); then \

(cd $(DESTDIR)$(LIBDIR); $(LN) -sf $(INSTSONAME) $(LDLIBRARY)) \

fi \

fi; \

if test -n "$(PY3LIBRARY)"; then \

$(INSTALL_SHARED) $(PY3LIBRARY) $(DESTDIR)$(LIBDIR)/$(PY3LIBRARY); \

fi; \

else true; \

fi

bininstall: altbininstall

-if test -f $(DESTDIR)$(BINDIR)/python3$(EXE) -o -h $(DESTDIR)$(BINDIR)/python3$(EXE); \

then rm -f $(DESTDIR)$(BINDIR)/python3$(EXE); \

else true; \

fi

(cd $(DESTDIR)$(BINDIR); $(LN) -s python$(VERSION)$(EXE) python3$(EXE))

-if test "$(VERSION)" != "$(LDVERSION)"; then \

rm -f $(DESTDIR)$(BINDIR)/python$(VERSION)-config; \

(cd $(DESTDIR)$(BINDIR); $(LN) -s python$(LDVERSION)-config python$(VERSION)-config); \

rm -f $(DESTDIR)$(LIBPC)/python-$(LDVERSION).pc; \

(cd $(DESTDIR)$(LIBPC); $(LN) -s python-$(VERSION).pc python-$(LDVERSION).pc); \

fi

-rm -f $(DESTDIR)$(BINDIR)/python3-config

(cd $(DESTDIR)$(BINDIR); $(LN) -s python$(VERSION)-config python3-config)

-rm -f $(DESTDIR)$(LIBPC)/python3.pc

(cd $(DESTDIR)$(LIBPC); $(LN) -s python-$(VERSION).pc python3.pc)

-rm -f $(DESTDIR)$(BINDIR)/idle3

(cd $(DESTDIR)$(BINDIR); $(LN) -s idle$(VERSION) idle3)

-rm -f $(DESTDIR)$(BINDIR)/pydoc3

(cd $(DESTDIR)$(BINDIR); $(LN) -s pydoc$(VERSION) pydoc3)

-rm -f $(DESTDIR)$(BINDIR)/2to3

(cd $(DESTDIR)$(BINDIR); $(LN) -s 2to3-$(VERSION) 2to3)

-rm -f $(DESTDIR)$(BINDIR)/pyvenv

(cd $(DESTDIR)$(BINDIR); $(LN) -s pyvenv-$(VERSION) pyvenv)

# Install the manual page

maninstall:

@for i in $(MANDIR) $(MANDIR)/man1; \

do \

if test ! -d $(DESTDIR)$$i; then \

echo "Creating directory $$i"; \

$(INSTALL) -d -m $(DIRMODE) $(DESTDIR)$$i; \

else true; \

fi; \

done

$(INSTALL_DATA) $(srcdir)/Misc/python.man \

$(DESTDIR)$(MANDIR)/man1/python$(VERSION).1

# Install the library

PLATDIR= plat-$(MACHDEP)

EXTRAPLATDIR= @EXTRAPLATDIR@

MACHDEPS= $(PLATDIR) $(EXTRAPLATDIR)

XMLLIBSUBDIRS= xml xml/dom xml/etree xml/parsers xml/sax

LIBSUBDIRS= tkinter tkinter/test tkinter/test/test_tkinter \

tkinter/test/test_ttk site-packages test \

test/capath test/data \

test/cjkencodings test/decimaltestdata test/xmltestdata \

test/subprocessdata test/sndhdrdata \

test/tracedmodules test/encoded_modules \

test/namespace_pkgs \

test/namespace_pkgs/both_portions \

test/namespace_pkgs/both_portions/foo \

test/namespace_pkgs/not_a_namespace_pkg \

test/namespace_pkgs/not_a_namespace_pkg/foo \

test/namespace_pkgs/portion1 \

test/namespace_pkgs/portion1/foo \

test/namespace_pkgs/portion2 \

test/namespace_pkgs/portion2/foo \

test/namespace_pkgs/project1 \

test/namespace_pkgs/project1/parent \

test/namespace_pkgs/project1/parent/child \

test/namespace_pkgs/project2 \

test/namespace_pkgs/project2/parent \

test/namespace_pkgs/project2/parent/child \

test/namespace_pkgs/project3 \

test/namespace_pkgs/project3/parent \

test/namespace_pkgs/project3/parent/child \

test/namespace_pkgs/module_and_namespace_package \

test/namespace_pkgs/module_and_namespace_package/a_test \

collections concurrent concurrent/futures encodings \

email email/mime test/test_email test/test_email/data \

html json test/json_tests http dbm xmlrpc \

sqlite3 sqlite3/test \