wsh_shell_adapter

Python adapter for working with wsh-shell over:

• serial/UART (pyserial)
• local process via PTY (PtyProcessTransport)

Features

• connect by fixed port or auto-discover by vid/pid
• synchronize/authenticate with shell (Press <Enter> -> Login -> Password -> prompt)
• optionally verify sync by ping_command_and_response
• execute commands with timeout and retry logic
• parse command output into structured dict (json or key: value)
• recover on failures with optional fallback ping

Quick Start

From repository root:

python3 -m venv .venv
. .venv/bin/activate
pip install -r wsh_shell_adapter/requirements.txt

Minimal usage:

from wsh_shell_adapter import AdapterConfig, WshShellAdapter

cfg = AdapterConfig(
    vid=0x0483,
    pid=0x5740,
    baudrate=115200,
    login="root",
    password="1234",
)

adapter = WshShellAdapter(config=cfg)
adapter.sync()
result = adapter.execute("wsh")
print(result.text)
print(result.data)
adapter.close()

Config File (TOML)

Default path: wsh_shell_adapter/config.toml

[adapter] maps to AdapterConfig fields.
[local_shell] is used by run_local_shell.py.

Example:

[adapter]
port = ""
vid = 0x0483
pid = 0x5740
baudrate = 115200
login = "root"
password = "1234"
newline = "\r"
command_timeout_s = 3.0
retries = 1
auto_recover = true
ping_command_and_response = ["wsh --ping", "pong"]
prompt_regex = "^(?:[^\\r\\n]+@[^\\r\\n]+\\s*>|wsh-shell>)\\s*$"

[local_shell]
binary = "example/build/example"
cwd = "."

If ping_command_and_response is set, sync() sends the command after prompt detection and expects the configured response as the full cleaned output or as one full output line before marking the adapter as synced. If ping_command_and_response is missing or [], sync() sends a fixed probe command and treats any non-empty command output as proof that the shell is alive. auto_recover controls whether the adapter tries soft/hard recovery after command failures.

Load config directly:

from wsh_shell_adapter import load_adapter_config_from_toml

cfg = load_adapter_config_from_toml("wsh_shell_adapter/config.toml")

Resolve port selection in application code without touching pyserial directly:

from wsh_shell_adapter import (
    format_serial_port,
    list_serial_ports,
    prompt_for_serial_port,
    resolve_serial_port,
)

ports = list_serial_ports()
for item in ports:
    print(format_serial_port(item))

selected_port = resolve_serial_port(ports=ports, chooser=prompt_for_serial_port)

Helper Scripts

Local PTY helper

python -m wsh_shell_adapter.run_local_shell

Before first run in a clean checkout, build example binary:

make src/wsh_shell_cfg.h
make example

USB helper

python -m wsh_shell_adapter.run_usb_shell

It loads [adapter] settings from wsh_shell_adapter/config.toml and starts interactive REPL.

Tests

Install test dependencies:

pip install -r tests/requirements.txt

Run all adapter tests:

pytest -q tests -vv

Detailed test notes: ../tests/README.md