Tags: navidmostofi/RIOT
Tags
RELEASE 2019.07
RIOT-2019.07 - Release Notes
============================
RIOT is a multi-threading operating system which enables soft real-time
capabilities and comes with support for a range of devices that are typically
found in the Internet of Things: 8-bit and 16-bit microcontrollers as well as
light-weight 32-bit processors.
RIOT is based on the following design principles: energy-efficiency, soft
real-time capabilities, small memory footprint, modularity, and uniform API
access, independent of the underlying hardware (with partial POSIX compliance).
RIOT is developed by an international open-source community which is
independent of specific vendors (e.g. similarly to the Linux community) and is
licensed with a non-viral copyleft license (LGPLv2.1), which allows indirect
business models around the free open-source software platform provided by RIOT.
About this release:
===================
The 2019.07 release includes a number of new features including many new
boards and cpu, riotboot added to many new and old boards, USB is now available,
BLE improvements, Ethernet on stm32 platforms, as well as many bug fixes and
documentation updates. Testing has also improved with both On-Target Testing
increasing and now Hardware Assisted Automated Tests being run.
About 300 pull requests with about 659 commits have been merged since the last
release and about 50 issues have been solved. 26 people contributed with code
in 106 days. Approximately 1377 files have been touched with 181993 insertions
and 19668 deletions.
Notations used below:
=====================
+ means new feature/item
* means modified feature/item
- means removed feature/item
New features and changes
========================
System libraries
----------------
+ Add OCB encryption mode
+ sys/shell: add loramac shell command
* Fletcher16: extend with multi-part functions
+ USBUS: Initial work towards an USB stack
+ usbus: Initial simple auto init structure
* sys: make uart_stdio RX optional
+ sys/event: add event_wait_until()
+ sys/bluetil: add bluetil_addr_from_str()
+ usbus: Add CDC-ECM (Ethernet Control Model) function
* usbus: simplify adding entry to list
* sys/stdio_ethos: replace USE_ETHOS_FOR_STDIO by stdio_ethos pseudomodule
Networking
----------
* gnrc_ipv6_nib: add address from netif to address validation timer
+ netdev_ieee802154: add txpower and page
+ net/lorawan/hdr: add lorawan header helpers
+ ble/nimble: add support for build-in IPSS service
* pkg/semtech-loramac: rework interaction with the MAC
* pkg/semtech-loramac: provide basic persistence for MAC state
* RPL: API update suggestions
+ ipv6_ext: add fragmentation extension definitions
* net/sock_util: Accept NULL pointers in urlsplit
+ sys/net: add netopt options for lorawan
* gnrc_tftp: Fix out-of-bounds memory access when comparing modes
- gnrc_pktbuf: remove gnrc_pktbuf_duplicate_upto
- gnrc_ipv6: remove obsolete and harmful reception code
* gnrc_tftp: set port on server init
+ ble/softdevice: add ble_nordic_softdevice feature
* net/mqttsn: fix client ID length to comply to the standard
+ gnrc_tftp: Add minimum packet length check
Packages
--------
* pkg/monocypher: bump version to 2.0.5
* ble/nimble: bump version to 9d4bda2
* openthread: update to release 20180926
* minmea: bump version to current master
+ nanocbor: Initial support for the nanocbor package
* pkg/lua: Make the module searchers conform to the API
Boards
------
+ boards/stm32l0538-disco: add initial support
+ boards/nucleo-l4r5zi: initial basic support
+ boards/particle-{xenon,argon,boron}: add initial support
* boards/kw41z: add common configuration and use it with existing
kw41z boards
+ added SPI support for Nucleo-F767ZI
+ boards: Add support for the Arduino-Leonardo
* boards/nucleof7*: SPI and refactoring
+ boards/stm32: introduce and use new common rtt configuration header
+ boards/stm32l0/l4: add rtt feature
+ boards: add support for i-nucleo-lrwan1 (Arduino-like shield)
+ boards/nrf52840-mdk: added I2C config
+ boards/lsn50: add support for Dragino LSN50 LoRa Sensor Node
* boards/stm32l0: introduce common clock configuration and apply it to
related boards
* boards/b-l072z-lrwan1: use STM32 common i2C configuration
+ Add usbdev feature to Sodaq boards
+ boards/pba-d-01-kw2x: add riotboot support
+ sensebox: add usbdev feature
+ boards/stm32f429i-disc1: add i2c configuration
+ boards/nucleo-l476rg: add riotboot
+ boards/same54-xpro: add riotboot support
+ boards: Add FLASHFILE support
+ boards/nucleo-l476rg: Add DMA support
+ nrf52: Add suspend/resume detection to usbdev
+ nrf5x: Add UART modecfg feature implementation
+ boards/stm32f3: add support for riotboot feature
+ boards/lobaro-lorabox: add sx1272 radio driver dependency
to netdev_default
+ boards/stm32l4: add riotboot support
+ boards/microbit: add QEMU emulation
+ boards/frdm-kw41z-k64f: add riotboot
* boards/sltb001a: reset before flashing
CPU
---
* cpu/esp8266: added/changed helper functions
+ cpu/cc2538: Add periph_uart_mode implementation
* saml1x: enable pm_layered by default
+ cpu/cc26x0: implement uart_mode()
+ cpu/sam0: add support for SAMD5x/SAME5x
+ sam0_common: add uart modecfg support
+ cpu/stm32f3: add support for flashpage and flashpage_raw
* cpu/stm32l{1,4}: refactor flashpage numof macros
* cpu/stm32: optimize stop mode for stm32f*
* cpu/nrf5x_common: map hwrng to SoC library if SoftDevice is present
Device Drivers
--------------
+ devfs: add /dev/urandom and /dev/hwrng
* drivers/mrf24j40 : support of NETOPT_LAST_ED_LEVEL
+ drivers/mrf24j40: add external PA/LNA control on MC/MD/ME devices
* drivers/at86rf2xx: enable NETOPT_RX_END_IRQ and fix RSSI values
* drivers/adt7310: Replace binary literal with hex literal
+ drivers/ds75lx: add basic driver for temperature sensor
+ drivers/include: add header definition for wdt
+ drivers/at: Add 'at_recv_bytes_until_string' function
+ sx127x: add several NETOPT for GNRC LoRaWAN
* drivers/sx127x: fix device reset
+ drivers: stm32 eth peripheral driver
+ drivers/periph/gpio_util: add gpio_util_shiftin()
Build System / Tooling
----------------------
* makefiles/docker: export BOARDS
+ makefiles: add bootloaders to the list of applications
* Makefile.include: allow overwriting flash-recipe
* dist/tools/buildsystem_sanity_check: add an export variable check
* sys/Makefile.include: include riotboot headers when
FEATURES_REQUIRED=riotboot
+ make: add print-versions helper target
+ make: add LOG_LEVEL to overridable variables
* riotboot/Makefile.include: increase RIOTBOOT_HDR_LEN for ARMv7*-M
* dist/tools/build_system_sanity_check: BUG fix errors being ignored
* boards/common: use Makefile.features
+ make: add termdeps target
* periph_common: add as dependency to periph drivers
+ nrf52: Add USB peripheral driver
+ makefiles/boards.inc.mk: list boards variables
+ makefiles/app_dirs.inc.mk: target to list supported applications/boards
+ Makefile.features: add a common file for the features parsing
+ Makefile.features: add declarative FEATURES_ variables definition
+ makefiles/utils/variables: add functions to help managing variables
* Migrate all boards to define FLASHFILE
* tools/openocd.sh: try to probe the board for real flash address
Testing
-------
* tests/periph_flashpage: add RWWEE automatic test if hw supports it
* tests/pthread_tls: allow negative key values
* tests/gnrc_udp: include `gnrc_pktbuf_cmd` per default
+ tests/periph_hwrng: add automated python test
* tests/periph_timer: include kw41z boards in low-power timer boards
* tests/pkg_c25519: increase timeout for arduino-mega2560
+ tests/xtimer_usleep: fail with negative offsets
+ unittests: add tsrb tests
+ tests/stdin: add non regression test for stdin module
+ tests/xtimer_mutex_lock_timeout: add simple case test
+ Add NimBLE heart rate sensor example (GATT notifications)
* tests/driver_rn2xx3: fix invalid element index for txmode
* tests/pkg_semtech-loramac: don't init the mac from main
* tests/devfs: move tests-devfs out of unittests
+ examples/lorawan: fix semtech_loramac_send TX ret code
* tests/unittests: split remaining packages tests to different test
directory
API Changes
========================
- uart_stdio RX is now optional
- CPU_MODEL declared in boards/Makefile.features
```c
- void isrpipe_init(isrpipe_t *isrpipe, char *buf, size_t bufsize);
+ void isrpipe_init(isrpipe_t *isrpipe, uint8_t *buf, size_t bufsize);
- int isrpipe_write_one(isrpipe_t *isrpipe, char c);
+ int isrpipe_write_one(isrpipe_t *isrpipe, uint8_t c);
- int isrpipe_read(isrpipe_t *isrpipe, char *buf, size_t count);
+ int isrpipe_read(isrpipe_t *isrpipe, uint8_t *buf, size_t count);
- int isrpipe_read_timeout(isrpipe_t *isrpipe, char *buf, size_t count,\
int32_t timeout);
+ int isrpipe_read_timeout(isrpipe_t *isrpipe, uint8_t *buf, size_t count,\
uint32_t timeout);
- int isrpipe_read_all_timeout(isrpipe_t *isrpipe, char *buf, size_t count,\
uint32_t timeout);
+ int isrpipe_read_all_timeout(isrpipe_t *isrpipe, uint8_t *buf, size_t count,\
uint32_t timeout);
typedef struct tsrb {
...
- char *buf; /**< Buffer to operate on. */
+ uint8_t *buf; /**< Buffer to operate on. */
...
} tsrb_t
- int tsrb_get(tsrb_t *rb, char *dst, size_t n);
+ int tsrb_get(tsrb_t *rb, uint8_t *dst, size_t n);
- int tsrb_add_one(tsrb_t *rb, char c);
+ int tsrb_add_one(tsrb_t *rb, uint8_t c);
- int tsrb_add(tsrb_t *rb, const char *src, size_t n);
+ int tsrb_add(tsrb_t *rb, const uint8_t *src, size_t n);
typedef struct {
...
- uint16_t (*calc_rank)(gnrc_rpl_parent_t *parent, uint16_t base_rank);
- gnrc_rpl_parent_t *(*which_parent)(gnrc_rpl_parent_t *, gnrc_rpl_parent_t *);
+ uint16_t (*calc_rank)(gnrc_rpl_dodag_t *dodag, uint16_t base_rank);
- void (*reset)(gnrc_rpl_dodag_t *); /**< resets the OF */
+ void (*reset)(gnrc_rpl_dodag_t *dodag);
...
- void (*init)(void); /**< OF specific init function */
+ void (*init)(gnrc_rpl_dodag_t *dodag);
} gnrc_rpl_of_t;
- thread_state_t
+ thread_status_t
- void sched_set_status(thread_t *process, thread_state_t status);
+ void sched_set_status(thread_t *process, thread_status_t status);
struct _thread {
...
- thread_state_t status;
+ thread_status_t status;
...
}
- bool mrf24j40_cca(mrf24j40_t *dev);
+ bool mrf24j40_cca(mrf24j40_t *dev, int8_t *rssi);
```
Deprecations
========================
Warnings
--------
`gnrc_tftp` module
`ubjson` module
Removals
--------
`gcoap_req_send()` replaced with `gcoap_req_send2()->gcoap_req_send2()`
Known issues
============
Networking related issues
-------------------------
address
assertion or completely without error
configured prefix
chars
address
Timer related issues
--------------------
time.
_xtimer_now() and irq_disable()
Drivers related issues
----------------------
clock cycles
R21
supported
Native related issues
---------------------
log_printfnoformat
Other platforms related issues
------------------------------
(not previous)
boards
CS
LTO
types
Build system related issues
---------------------------
bionic`.
evaluation
image
Makefile.include
value
* buildtest with BUILD_IN_DOCKER hides host toolchain errors
Other issues
------------
optimization
in udp.c
10
static_asserts in the same scope
everywhere
Fixed Issues from the last release (2019.04)
============================================
and no error
Acknowledgements
================
We would like to thank all companies that provided us with hardware for porting
and testing RIOT-OS. Further thanks go to companies and institutions that
directly sponsored development time. And finally, big thanks to all of you
contributing in so many different ways to make RIOT worthwhile!
A special thanks to @fjmolinas, @leandrolanzieri, @cladmi, @jia200x, @miri64
for helping run the release tests
More information
================
http://www.riot-os.org
Mailing lists
-------------
* RIOT OS kernel developers list
[email protected] (http://lists.riot-os.org/mailman/listinfo/devel)
* RIOT OS users list
[email protected] (http://lists.riot-os.org/mailman/listinfo/users)
* RIOT commits
[email protected] (http://lists.riot-os.org/mailman/listinfo/commits)
* Github notifications
[email protected] (http://lists.riot-os.org/mailman/listinfo/notifications)
IRC
---
* Join the RIOT IRC channel at: irc.freenode.net, #riot-os
License
=======
* The code developed by the RIOT community is licensed under the GNU Lesser
General Public License (LGPL) version 2.1 as published by the Free Software
Foundation.
* Some external sources and packages are published under a separate license.
All code files contain licensing information.
Merge pull request RIOT-OS#11873 from fjmolinas/backport/2019.07/pr_l… …orawan_retcode examples/lorawan: fix semtech_loramac_send TX ret code [backport 2019.07]
Merge pull request RIOT-OS#11858 from cladmi/backport/2019.07/pr/test… …s/unittest/split/devfs tests/devfs: move tests-devfs out of unittests [backport 2019.07]
Merge pull request RIOT-OS#8939 from aabadie/pr/boards/nucleo-l4r5zi boards/nucleo-l4r5zi: initial basic support
RELEASE 2019.04
RIOT-2019.04 - Release Notes
============================
RIOT is a multi-threading operating system which enables soft real-time
capabilities and comes with support for a range of devices that are typically
found in the Internet of Things: 8-bit and 16-bit microcontrollers as well as
light-weight 32-bit processors.
RIOT is based on the following design principles: energy-efficiency, soft
real-time capabilities, small memory footprint, modularity, and uniform API
access, independent of the underlying hardware (with partial POSIX compliance).
RIOT is developed by an international open-source community which is
independent of specific vendors (e.g. similarly to the Linux community) and is
licensed with a non-viral copyleft license (LGPLv2.1), which allows indirect
business models around the free open-source software platform provided by RIOT.
About this release:
===================
The 2019.04 release includes a number of new features including porting of
riotboot to a number of new platforms, 802.15.4 support on the nRF52, and the
ability for firmware to flash images into a separate boot slot. Support for
several new boards and new sensors was added. Additionally, this release
contains a number of bug fixes and test improvements.
About 320 pull requests with about 569 commits have been merged since the last
release and about 40 issues have been solved. 44 people contributed with code
in 88 days. Approximately 825 files have been touched with 32716 insertions
and 5149 deletions.
Notations used below:
=====================
+ means new feature/item
* means modified feature/item
- means removed feature/item
New features and changes
========================
System libraries
----------------
+ riotboot_flashwrite: added module to reliably write a firmware image to
flash
+ crypto: added support for chacha20poly1305 AEAD symmetric key cypher
algorithm
* threads: added usage of thread_state_t enum to define thread states,
instead of an integer
* random: added usage of hwrng as seed if available
+ app_metadata: added module to print application metadata
+ unaligned.h: added functions to safely read values from potentially
unaligned pointers
+ isrpipe: split isrpipe_read_timeout to isolate xtimer dependency
Networking
----------
* gnrc_ipv6: adapted ping6 to original-ping-like implementation
* gnrc_ipv6: allowed sending empty IPv6 packets
+ gnrc_netif_ieee802154: optional support to drop duplicate broadcast
packets
- gnrc_pktbuf: removed deprecated gnrc_pktbuf_get_iovec() function
+ l2util: initial import of a general IPv6 over X helper module
+ NimBLE: added Bluetooth device scanner
+ NimBLE: added helper functions for address printing
* NimBLE: updated package to the latest version
Packages
--------
+ c25519: add support (embedded x25519 crypto library)
Boards
------
+ Arduino nano: added support
+ nrf52832-mdk: added support
+ PhyTec reel board: added support
+ MicroPython pyboard v1.1: added support
+ Hamilton: added support
+ saml10-xpro and saml11-xpro: added riotboot support
+ nrf52: added riotboot support
+ ESP32 and stm32: added command to allow runtime configuration of uart mode
+ ESP32 and ESP8266: add support for ESP-NOW network device driver
* ESP8266: freed up RAM by moving most .rodata sections from DRAM to IROM
+ Arduino: added test to verify pin mappings
+ b-l072z-lrwan1: enabled RTT feature
+ STM32l0: added support for dual bank flashing with OpenOCD
* Autonomo: changed flasher to BOSSA
* stm32: rework common clock configuration for stm32f4
* stm32f3discovery: Fix no external low speed crystal
CPU
---
+ stm32l0: added riotboot support
+ stm32f0: added support for periph_pm
+ stm32f3, f7, l1 and l4: added stop and standby low power modes. All
STM32 families now provide periph_pm
+ samd21: enabled idle modes
+ sam0: added support for RWWEE on-chip memory
+ Kinetis: added support for EA series and S9KEAZ129 MCU
+ TI CC2650: added I2C periph implementation
Device Drivers
--------------
+ i2c: added slave scan shell command
+ USB: added device driver initialization function and API definition
+ USB: added peripheral driver for sam0_common
+ nrf5x temperature sensor: added driver
+ nrf52: added initial 802.15.4 support
+ add7746 capacitance sensor: added driver
+ ds323x extremely accurate RTC: added driver
+ ltc4150 coulomb counter: added driver
+ sht2x temperature and humidity sensor: added driver
+ sds011 dust sensor: added driver
+ added high level driver for H bridge ICs to drive DC motors
* lpsxxx pressure and temperature sensor: add support for lps22hb and
lps25hb
Build System / Tooling
----------------------
+ nrf52: added support for openocd
* improved avrdude integration
+ added support for socat as a RIOT terminal
+ added script for backporting PRs during release testing
* pyterm: specified use of python3 by default
* flasher: support for flashing images at offset addresses `pyocd`, `jlink`
* Texas Instruments UniFlash: put configuration in common
* makefiles: introduce FLASHFILE
* Use FLASHFILE for `riotboot` and `mcuboot`
* Update flashers `avrdude`, `edbg`, `jlink`, lpc2k_pgm`, `openocd`
* makefiles/docker.inc.mk: Use directories in RIOT when possible
* make: unexport `TERM*` variables
* msba2: compile 'lpc2k_pgm' when flashing
Testing
-------
+ documentation: added initial guide to running tests
+ Makefile.include: add a 'test/available' target
* testrunner: Fix bug matching local echo
* tests/rng: replace printf_float with fmt/print_float
* tests/bloom_bytes: replace %f with fmt/print_float
* tests/posix_semaphore: sem_timedwait should not return before abstime
Known issues
============
Networking related issues
-------------------------
address
assertion or completely without error
configured prefix
address
Timer related issues
--------------------
_xtimer_now() and irq_disable()
Drivers related issues
----------------------
supported
Native related issues
---------------------
Other platform related issues
-----------------------------
clock cycles
and no error
(not previous)
boards
types
Build system related issues
---------------------------
evaluation
image
Makefile.include
value
Other issues
------------
static_asserts in the same scope
everywhere
Fixed Issues from the last release (2019.01)
============================================
You can get the complete detail in the git history and in the release milestone
[Release 2019.04](https://github.com/RIOT-OS/RIOT/milestone/26?closed=1).
Acknowledgements
================
We would like to thank all companies (vendors) that provided us with (their)
hardware for porting and testing RIOT-OS. Further thanks go to companies and
institutions that directly sponsored development time. And finally, big thanks
to all of you contributing in so many different ways to make RIOT worthwhile!
More information
================
http://www.riot-os.org
Mailing lists
-------------
* RIOT OS kernel developers list
[email protected] (http://lists.riot-os.org/mailman/listinfo/devel)
* RIOT OS users list
[email protected] (http://lists.riot-os.org/mailman/listinfo/users)
* RIOT commits
[email protected] (http://lists.riot-os.org/mailman/listinfo/commits)
* Github notifications
[email protected] (http://lists.riot-os.org/mailman/listinfo/notifications)
IRC
---
* Join the RIOT IRC channel at: irc.freenode.net, #riot-os
License
=======
* The code developed by the RIOT community is licensed under the GNU Lesser
General Public License (LGPL) version 2.1 as published by the Free Software
Foundation.
* Some external sources and packages are published under a separate license.
All code files contain licensing information.
Merge pull request RIOT-OS#11430 from danpetry/backport/2019.04/gnrc_… …ipv6_nib/fix/no-auto-config-wo-l2addr gnrc_ipv6_nib: don't autoconfig IPv6 address without L2 addr [backport 2019.04]
Merge pull request RIOT-OS#11339 from OTAkeys/pr/fix_stm32_rtc_alarm cpu/stm32_common: fix month encoding in RTC driver for alarm
RELEASE 2019.01
RIOT-2019.01 - Release Notes
============================
RIOT is a multi-threading operating system which enables soft real-time
capabilities and comes with support for a range of devices that are typically
found in the Internet of Things: 8-bit and 16-bit microcontrollers as well as
light-weight 32-bit processors.
RIOT is based on the following design principles: energy-efficiency, soft
real-time capabilities, small memory footprint, modularity, and uniform API
access, independent of the underlying hardware (with partial POSIX compliance).
RIOT is developed by an international open-source community which is
independent of specific vendors (e.g. similarly to the Linux community) and is
licensed with a non-viral copyleft license (LGPLv2.1), which allows indirect
business models around the free open-source software platform provided by RIOT.
About this release:
===================
The 2019.01 release includes a number of new features including DMA support on
all STM32 boards, WiFi with IP connectivity on ESP32 and ESP8266, and riotboot,
a simple bootloader supporting multiple firmware slots, compatible with most Arm
Cortex-M boards supported by RIOT. Support for several new boards and new sensors
was added, as well as for the new CPU architecture Armv8-M (Cortex-M23). Last
but not least, this release contains a number of bug fixes and enhances test
automation.
About 387 pull requests with about 912 commits have been merged since the last
release and about 36 issues have been solved. 54 people contributed with code
in 110 days. Approximately 1554 files have been touched with 176241 insertions
and 50593 deletions.
Notations used below:
=====================
+ means new feature/item
* means modified feature/item
- means removed feature/item
New features and changes
========================
System libraries
----------------
+ riotboot: initial implementation of a bootloader with multi-slots
and firmware header management
+ base64: add size estimation functions
Networking
----------
* gnrc_ipv6: send IPv6 error messages on error
* gnrc_ipv6: refactor and improve IPv6 message reception
* gnrc_netif: refactor for easier device type integration
+ pkg_semtech-loramac: added timer calibation
* nanocoap: fix confirmable retry countdown
Packages
--------
* gecko_sdk: bumped to version 2.5
Boards
------
+ added support for Kinetic USB-KW41Z
+ added support for Makerdiary nrf52840-mdk
+ added support for Microchip saml10-xpro and saml11-xpro
+ added support for Nordic nrf51-dk
+ added support for Phytec phynode-kw41z
+ added support for SODAQ SARA AFF
* b-l475e-iot01a: provide RTC and RTT features
* stm32: factorize common I2C configurations
* nucleo-l433rc/nucleo-f072rb/nucleo-f767zi: provide I2C configuration
* nucleo-l433rc: use LPUART (USB port) as stdio
* nucleo-l496zg: use LPUART (USB port) as stdio
* frdm-k64f: updated LPTMR configuration
* sensebox_samd21: add MTD configuration
* nrf51: factorize files and configurations of nrf51 based boards
* nrf52: better factorize files and configurations of nrf52 based boards
CPU
---
+ cortexm-common: add FPU support for cortex-m4f and cortex-m7
+ cortexm-common: added support for cortex-m23
+ added support for saml10 and saml11
+ efm32: added support for 32-bit timers
+ esp32: added esp_wifi netdev driver
+ esp8266: added esp_wifi netdev driver
+ stm32-common: add DMA support for all STM32
+ stm32-common: add LPUART driver
+ atmega-common: Add PUF SRAM feature
* nrf5x: added management of multiple exti pins in gpio driver
* nrf5x: rework UART driver to allow using multiple UARTs on nrf52840
Device Drivers
--------------
+ added support for CCS811 gas sensor
+ added support for SHT3x temperature and humidity sensor
+ added support for TPS6274x step-down dcdc converter
* periph_eeprom: added clear and erase functions
Build System / Tooling
----------------------
+ added support for PyOCD programmer
+ added compile_and_test_for_board script + checks
* updated EDBG version
* testbed-support: added frdm-kw41z, pba-d-01-kw2x, samr30-xpro to
supported archis
* pyterm: correctly catch exception when serial port is busy
* print_toolchain_version: added 'make' version
Testing
-------
+ periph_dma: added automatic test script
+ periph_rtc: added automatic test script
Known issues
============
Networking related issues
-------------------------
address
assertion or completely without error
configured prefix
address
Timer related issues
--------------------
_xtimer_now() and irq_disable()
Drivers related issues
----------------------
supported
Native related issues
---------------------
Other platforms related issues
------------------------------
(not previous)
boards
types
Build system related issues
---------------------------
evaluation
image
Makefile.include
value
Other issues
------------
static_asserts in the same scope
everywhere
Fixed Issues from the last release (2018.10)
============================================
re-set
fragmentation?
load
2 instances
You can get the complete detail in the git history and in the release milestone
[Release 2019.01](https://github.com/RIOT-OS/RIOT/milestone/25?closed=1).
Acknowledgements
================
We would like to thank all companies (vendors) that provided us with (their)
hardware for porting and testing RIOT-OS. Further thanks go to companies and
institutions that directly sponsored development time. And finally, big thanks
to all of you contributing in so many different ways to make RIOT worthwhile!
More information
================
http://www.riot-os.org
Mailing lists
-------------
* RIOT OS kernel developers list
[email protected] (http://lists.riot-os.org/mailman/listinfo/devel)
* RIOT OS users list
[email protected] (http://lists.riot-os.org/mailman/listinfo/users)
* RIOT commits
[email protected] (http://lists.riot-os.org/mailman/listinfo/commits)
* Github notifications
[email protected] (http://lists.riot-os.org/mailman/listinfo/notifications)
IRC
---
* Join the RIOT IRC channel at: irc.freenode.net, #riot-os
License
=======
* The code developed by the RIOT community is licensed under the GNU Lesser
General Public License (LGPL) version 2.1 as published by the Free Software
Foundation.
* Some external sources and packages are published under a separate license.
All code files contain licensing information.
RIOT-2018.10.1 - Release Notes
==============================
This is a bug fixing release for the RIOT 2018.10 release.
The following bugs were fixed:
- sock_dns: remove out-of-place puts() call
- sock_dns: remove some magic numbers
- sock_dns: fix out-of-bound errors
- pkg/jerryscript: disable -Wconversion for llvm
- pkg/nimble: disable -Waddress-of-packed-member for llvm
- pkg/tinycrypt: update commit hash after upstream rewrote history
- at86rf2xx: correct framebuffer release
PreviousNext