Welcome to the TangNano9K-Galaga! This guide will help you download and run the Galaga arcade game on your Tang Nano 9K FPGA board. Enjoy the classic game experience right at your fingertips!

Click the button above to visit the Releases page and get the latest version.

Before you begin, ensure you have the following:

• Tang Nano 9K FPGA Board: This is essential for running the game.
• USB Cable: Use this to connect your FPGA board to your computer.
• Windows, macOS, or Linux: Make sure your computer's operating system is compatible.

1. Go to the Releases page: Download TangNano9K-Galaga.

2. Once on the Releases page, you will see several versions of the game. Look for the latest version at the top of the list.

3. Click on the version number or the release title.

4. Download the provided files. You will usually find a .bin file that is ready to upload to your FPGA board.

5. After the download completes, unzip the file if it’s in a compressed folder.

6. Use your USB cable to connect the Tang Nano 9K to your computer.

7. Follow the below steps to load the game file onto your FPGA board:

   • Open the software that communicates with your FPGA board (refer to the board's manual for specifics).
   • Select the .bin file you downloaded.
   • Upload the file to the board.

8. Once the upload is complete, disconnect the USB cable.

9. Turn on your Tang Nano 9K FPGA board.

10. Use your board's controls to navigate the game.

Enjoy playing Galaga!

• Classic Gameplay: Relive the arcade classic with familiar mechanics.
• Multiple Levels: Challenge yourself with progressive levels that increase in difficulty.
• Bright Graphics: Experience visually engaging graphics tailored for the Tang Nano 9K.
• User-Friendly Controls: The game utilizes straightforward controls for easy playability.
• Save Capability: Save your game progress and pick up where you left off.

If you encounter any issues:

• Ensure your Tang Nano 9K is properly connected to your computer.
• Double-check that you downloaded the correct version of the game.
• Restart your FPGA board and try loading the game again.

For more help, visit the issues section on the GitHub page to see if others have experienced similar problems.

This project includes terms that help categorize it. Here are the relevant keywords:

• 9k
• arcade
• fpga
• galaga
• game
• gowin
• mist
• mister
• nano
• pinballwiz
• pinballwizz
• sipeed
• tang
• tangnano
• tangnano9k
• verilog
• vhdl

For more information, you can reach out through the GitHub Issues page. We are here to help with any queries about the game or how to install and run it.

Thank you for using TangNano9K-Galaga! Enjoy your arcade adventure.