Longan Nano (GD32V) SPI slave sending 16 bit data to Raspberry Pi Zero 2W master

This project is designed to integrate the CMake build system with Visual Studio Code, providing a streamlined development environment for GD32W515 Demo Suites.

The IAP Bootloader instantiation of GD32F450VIT6( FLASH 2MB) with PC tool.

This project is designed to integrate the CMake build system with Visual Studio Code, providing a streamlined development environment for GD32E51x Demo Suites.

This is a standalone CMake library version of the GD32VF103_standard_peripheral firmware provided by Gigadevice.

Base project for gd32f107vc

This project is designed to integrate the CMake build system with Visual Studio Code, providing a streamlined development environment for GD32E50x Demo Suites.

This project is designed to integrate the CMake build system with Visual Studio Code, providing a streamlined development environment for GD32F3x0 Demo Suites.

This project is designed to integrate the CMake build system with Visual Studio Code, providing a streamlined development environment for GD32E502 Demo Suites.

This is a successful attempt of writing an alternative firmware for the LD1125H FMCW radar to extract raw ADC values from the Echo/Bang signal via high-speed UART.

PlatformIO platform for the GD32F103Rx/GD32F303Rx Cortex-M3 and M4 chips

基于GD32F130设计的物联网开发板，提供原理图/PCB文件与MDK工程模板（含固件库、BSP、测试代码）、设计参考资料

Минимальная обвязка под GD32

A running led / cmake example for the SeedStudio GD32 dev board.

a testbed based on Gigadevice's GD32330C-start dev board

Microcontroller Firmware Library For GD32 chips

Bootloader with TFTP Server

This is a standalone CMake library version of the RISCV firmware provided by Gigadevice.

Arduino Core for GD32 (GD32F103Rx/GD32F303Rx) using the MFL C++ library

This project is designed to integrate the CMake build system with Visual Studio Code, providing a streamlined development environment for GD32G5x3 Demo Suites.