Tags: Frix-x/klippain
Tags
Merge pull request #309 from Frix-x/develop * Remove invalid option extruder extruder is a valid option for filament_motion_sensor, but not for filament_switch_sensor * Add dwell to wait for nozzle cooldown * flush klipper buffer before reseting filament sensor * resetting filter in the start_print to avoid a remaining delayed stop * fixed typo in SKR pico template on motor pin definition * Correct modified M109 to fix probing while too hot. Revert G4 command * Enhance M109 and M190 logic with "fix_heaters_temperature_settle" set to true * Fix variable refference error * Add files via upload * Update printer.cfg * Add extruder stepper vibrations * Corrected mistake in variable configuration * auto uninstall script added * Add Servo in SKR_Mini_E3 mcu template * reworked input shaper scripts * lot of improvements of the new shaper scripts * added the support of the new scripts in plot_graph.sh and the gcode macros * Add Spider 3 board * added filtering before the peak detection to avoid catching noise and false positives * refactored the plot_graph.sh into a Python script * tweaks to the install script and gitignore * fixed damping ratio computation * IS workflow v2 documentation draft * IS Documentation Reth draft (#319) Co-authored-by: Reth <[email protected]> * Add BTT EBB SB2209 CAN v1.0 RP2040 (#312) * added creality bed (#320) This commit refactor the bed includes to be more generic but keep the old one to avoid breaking stuff * moved the docs in preparation for K-Shake&Tune release... * fix: module heatsoak bed should use current temperature * Create adxl345_sht_v2.x.cfg The SHT36_v2 differs from the SHT36_v1 and has the ADXL345 on SPI2, not SPI1. * fix status LEDs for separate nozzle and logo LEDs The macro aways uses TRANSMIT=0 for the logo LEDs, which assumes that the subsequent call to nozzle LEDs will flush the data. That will only work if both sets of LEDs are on the same chain. The chains can be different though - configured through `status_leds_nozzle_led_name` and `status_leds_logo_led_name`. With this change, separate logo LEDs will use TRANSMIT=1 instead. * prevent flashing if G28 is not required * bump K-Shake&Tune to v1.1.2 * added a prefilled template for own user custom MCU * fixed conditional QGL/Z_TILT that wasn't working properly * added G2Z and G2E integration (#329) * transmit rawparams for _MODULE_CUSTOM1/3 and allow mesh profile load from slicer (#337) * START_PRINT macro : transmit rawparams for _MODULE_CUSTOM1/3 macros * START_PRINT macro : Add new parameter (MESH) for START_PRINT. If present, load the bed mesh profile with this name, otherwise previous procedure is applied * Update install.sh for is_workflow chmod (#338) * feat(mcu): Manta M8P V2 (#341) * add config files for 180mm printer like Micron+ (#335) * add user template for BTT_Manta_M8P_v2.0.cfg --------- Co-authored-by: Fragmon <[email protected]> * RP2040 USB support for Fysetc PortableInputShaper (#345) * Add RP2040 SPI1 USB boards (#342) * added Fysetc portableinputshaper support to printer.cfg --------- Co-authored-by: Luk Schwalb <[email protected]> --------- Co-authored-by: Donovan <[email protected]> Co-authored-by: Austin Dennis <[email protected]> Co-authored-by: W141-ID <[email protected]> Co-authored-by: fbeaukmi <[email protected]> Co-authored-by: JD Davis <[email protected]> Co-authored-by: Benoitone <[email protected]> Co-authored-by: Félix Boisselier <[email protected]> Co-authored-by: Reth <[email protected]> Co-authored-by: Tim West <[email protected]> Co-authored-by: Paulo Pacheco <[email protected]> Co-authored-by: blutack <[email protected]> Co-authored-by: Kamil Domański <[email protected]> Co-authored-by: Surion79 <[email protected]> Co-authored-by: Bruno Pontleve <[email protected]> Co-authored-by: Devon Hazelett <[email protected]> Co-authored-by: Fragmon <[email protected]> Co-authored-by: Luk Schwalb <[email protected]>
Merge pull request #149 from Frix-x/develop * Fixed sensorless homing * Fixed a bug that could happens in some very specific case in graph_vibrations.py when user is not "pi" and started with "sp..." (it matched a Regex) * Improvement to not wait for the nozzle temperature before doing a chamber heatsoak * Fixed the Z_ADJUST feature that could not be applied when the user would override the START_PRINT sequence without specifying a call to the z_offset module. Now Z_ADJUST is applied everytime at the end of the sequence to be sure we make use of it * Moved the START_PRINT sequence override into the override.cfg template file to make it more user-friendly. Also improved the associated comment to make it more clear that defaults are already included for each type of probes * Better management of the resonnance test position by using variables. Now it will use center of bed by default or the user input in the corresponding variable (and not the previously hardcoded position that needed an override). * New full and stock V0 support (bugs to be expected) * Added a logo-banner to Klippain * Enhancement of the "CALIBRATE" macro to adapt to the bed size automatically
PreviousNext