A Python MeshCore library with SPI LoRa radio support

A lightweight Repeater Daemon implemented in Python, built using the pymc_core library.

an awesome list of Meshtastic DIY nodes, PR additions welcome!

Web tool for monitoring a Meshtastic Node Deployment over TCP/HTTP

MeshAdventurer is hardware for Meshtastic with Off-Road use in mind

Small 1W LoRA on Seeed Studio XIAO nRF52840 PCB for Meshtastic (fork of Ikoka Nano)

Open source, multi-user SDR receiver software with a web interface

Home-assistant lovelace card for OpenEVSE integration

A customizable Home Assistant card to emulate the JK BMS screen.

Yet another multi-BMS Merging Solution

This revolutionary software enables EV battery packs to be easily reused for stationary storage in combination with solar inverters

Nissan LEAF TCU research & reverse-engineering

Toolbox for modifying/updating/backing up Nissan LEAF Head Unit

This integration allows to monitor Bluetooth Low Energy (BLE) battery management systems (BMS) from within Home Assistant.

Home Assistant Dashboard to display Inverter information. ESPHome configuration to collect inverter sensor data via modbus

Firmware for Open EVSE

Integrates OVMS V3 into Home Assistant through HACS. Communicates via MQTT, automatically creating and parsing vehicle entities. Developed with AI assistance.

☢️ ESP8266 / ESP32 Firmware for collecting and reporting statistics from Geiger counters

⚡ Solarman Stick Logger integration for 🏡 Home Assistant

⚡A customizable Home Assistant card to emulate the Sunsynk System flow that's displayed on the Inverter screen.

ESP8266 based WiFi and MQTT interface for MPPT Inverters that use watchpower

ESPHome component to monitor and control a Jikong Battery Management System (JK-BMS) via UART-TTL or BLE

Open Source Soldering Iron firmware

A tool to flash ironos to the pinecil soldering iron and possibly other pine64 devices in the future

Dev Profile

The Swiss army knife of vanilla Hackintoshing

Open source, multi-user SDR receiver software with a web interface

DIY Power Monitor project using PZEM-004T module and ESP-12F

Firmware for OpenEnergyMonitor OpenEVSE

Firmware for Open EVSE