Parser for the Cubic PM1006 serial protocol. The PM1006 is built into the IKEA Vindriktning air quality sensor. This utility may be used to read the data frames sent by the pm1006 over the serial line.

$ make

You can test with a USB-to-serial converter, e.g., CH-341 UART.

$ ./serial-read /dev/ttyUSB0

Note that the tty parameters are set to 9600 baud, 8N1, in raw mode. If you use input redirection, you might need to do this manually:

$ stty -F /dev/ttyUSB0 9600 cs8 -cstopb -parenb raw