[DAILY] [8767] update libs

TAG v2.0.2.1 main changes:

    three camera solution ready

TAG v2.0.1.30 main changes:

    36477 <multimedia> <feat> add cst816d tp driver code
    39360 <multimedia> <perf> optimize the lcd tp i2c init
    40413 <multimedia> <feat> add new spi lcd driver code
    40414 <multimedia> <feat> add spi lcd demo project
    37248 <tools> <feat> Add repo manifest version info when generate libs
    39041 <platform> <fix> Idle task assert V2
    39039 <platform> <fix> API that rtos_get_time_diff may overflow
    39050 <platform> <perf> It cost too time time when call bk_aon_rtc_get_us in ISR
    37512 <wifi> <feat> Add fast dhcp with dhcp-request way
    40388 <ble><fix> use rpa when first adv start
    40559 <pm> <fix>fix reboot failure issue
    40176 <pm> <fix>fix iperf deauth issue of iperf project after ps close cmd
    40857 <bt> <feat>support configuring directed advertising
    40724 <platform> <fix> Turn on the DMA copy function of USB
    40725 <platform> <perf> Increase the judgment of whether the detection device is fully released when a disconnection occurs
    40705 <platform> <fix> reset reason lost if crash in ISR
    40715 <bt> <docs>optimize bluetooth project doc
    40145 <wifi> <perf> optimize web vnd_cal and saradc instructions
    40171 <platform> <perf> optimize multi adc,add CCA interface
    40174 <wifi> <perf> optimize phy log,11AX PER,RF RU test
    40175 <wifi> <perf> add RF RU test
    40703 <wifi> <perf> optimize rssi accuracy
    37295 <wifi> <perf> write mac addr to otp1
    41079 <wifi> <feat>add license to https
    40361 <wifi> <perf> [RF] add crc verify when save RF calibration in OTP
    41172 <bt> <feat>add scan stopped event
    37778 <pm> <fix> pm debug cli cause SecureFault
    41171 <wifi> <perf> optimize xtal bound checking
    41077 <wifi> <fix> Stack mem overflow happened with IPV6 while save fast connect info
    41176 <platform> <fix> fix bl2 compilation error when TFM_BL2_LOG_LEVEL = NONE
    41291 <pm> <fix>add HW low voltage wakeup delay delta to wifi tbtt delay
    41260 <wifi> <fix> change timer to oneshot timer in rwnx_txq
    41411 <multimedia> <feat> add spi lcd display with qspi module
    41532 <bt> <fix>add processing for failure to get feature
    41707 <pm> <fix>fix  current increasement issue after second entry into low voltage state with wifi disabled
    41535 <platform> <feat> gpio retention support
    41526 <wifi> <feat> support country code 2.0
    41689 <pm> <perf>modify the low voltage from 0.5v to 0.6v
    41758 <multimedia> <docs> improve project and document
    41713 <bt> <perf>optimize ble throughput result display
    41114 <platform> <fix> Exit from low-voltage,task watchdog timeout assert
    41786 <multimedia> <fix> i2s test case work error
    41710 <wifi> <fix> [RF] avoid RFPLL unlock when dual-85 test
    41775 <wifi> <fix> [RF] fix bad EVM of some boards when low temperature
    41776 <wifi> <fix> [RF] fix WIFIPLL amplitude control issue
    37496 <wifi> <log> Assert at nxmac_monotonic_counter_2_lo_get:11955
    37433 <platform> <feat> watchdog reset at timer_hal_get_timer0_cnt()
    37493 <wifi> <perf> if there is no ack for ps null, max retry 8 times in dtim1
    41813 <bt> <docs>optimize dut document
    41863 <multimedia> <feat> remove unused project in automatic_project list
    41908 <pm> <perf>DIGLOD LOW VOLTAGE ENABLE CONFIG(Default enable, some project disable)
    41162 <platform> <fix> reading partitions table error
    41293 <wifi> <perf> optimize vnd_cal tool,add data check
    41724 <platform> <fix> PSRAM drive strength and voltage changed.
    41063 <wifi> <fix> When there is a wrong password, connecting to the router development board will not prompt a password error.
    41391 <wifi> <fix> expand the bss_max_count based on the number of scan
    41934 <bt> <fix> fix adv data buffer num
    41575 <platform> <docs> Remove all descriptions about the CM33 architecture and the number of CPU cores in the document
    42006 <multimedia> <perf> add lcd example part table
    42168 <platform> <fix> Enter the USB shutdown process and directly set the memory pointer to NULL
    41990 <platform> <fix> Add initialization completion flag
    42195 <doc> adjust mesh docs
    42255 <fix> add addr check when set adv random addr
    42418 <platform> <perf> Increase gpio docs illustrate
    42434 <platform> <perf> Open USB for 480M CPU usage voting

bk7236,bk7258 version release