@droxey's collection of sliced print files for the Ender3 3D printer running the Klipper firmware.
Save the script to your home directory: cd ~ && wget -O updateklipper https://raw.githubusercontent.com/droxey/3d/master/reinstall.sh && chmod +x updateklipper
pi@octopi:~ $ cd ~ && wget -O updateklipper https://raw.githubusercontent.com/droxey/3d/master/reinstall.sh && chmod +x updateklipper
--2019-01-06 05:10:45-- https://raw.githubusercontent.com/droxey/3d/master/reinstall.sh
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.40.133
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.40.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 645 [text/plain]
Saving to: ‘updateklipper’
updateklipper 100%[===================>] 645 --.-KB/s in 0s
2019-01-06 05:10:45 (5.97 MB/s) - ‘updateklipper’ saved [645/645]Run ./updateklipper in your home directory to completely, safely update your firmware whenever you wish!
Successful sample output below provided for debugging purposes.
pi@octopi:~ $ ./updateklipper
remote: Enumerating objects: 65, done.
remote: Counting objects: 100% (65/65), done.
remote: Compressing objects: 100% (14/14), done.
remote: Total 65 (delta 51), reused 65 (delta 51), pack-reused 0
Unpacking objects: 100% (65/65), done.
From https://github.com/KevinOConnor/klipper
24fe606..186d815 master -> origin/master
+ 310affa...8b5b6fb work-bltouch-debug-20181211 -> origin/work-bltouch-debug-20181211 (forced update)
Updating 24fe606..186d815
Fast-forward
config/generic-ramps.cfg | 1 +
docs/BLTouch.md | 64 ++++++++++++++++++++++++++++++++++++++++++
docs/FAQ.md | 10 +++++--
docs/G-Codes.md | 2 ++
klippy/extras/bus.py | 7 +++--
klippy/extras/display/menu.cfg | 2 +-
6 files changed, 80 insertions(+), 6 deletions(-)
create mode 100644 docs/BLTouch.md
###### Running apt-get update...
Hit:1 http://archive.raspberrypi.org/debian stretch InRelease
Get:2 http://raspbian.raspberrypi.org/raspbian stretch InRelease [15.0 kB]
Fetched 15.0 kB in 1s (11.8 kB/s)
Reading package lists... Done
###### Installing packages...
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'libncurses5-dev' instead of 'libncurses-dev'
binutils-arm-none-eabi is already the newest version (2.27-9+9).
build-essential is already the newest version (12.3).
gcc-arm-none-eabi is already the newest version (15:5.4.1+svn241155-1).
libffi-dev is already the newest version (3.2.1-6).
libncurses5-dev is already the newest version (6.0+20161126-1+deb9u2).
libnewlib-arm-none-eabi is already the newest version (2.4.0.20160527-2).
libusb-dev is already the newest version (2:0.1.12-30).
python-dev is already the newest version (2.7.13-2).
python-virtualenv is already the newest version (15.1.0+ds-1).
stm32flash is already the newest version (0.5-1).
virtualenv is already the newest version (15.1.0+ds-1).
avr-libc is already the newest version (1:2.0.0+Atmel3.6.1-1~rpt1).
avrdude is already the newest version (6.3+r1425-1+rpt1).
binutils-avr is already the newest version (2.26.20160125+Atmel3.6.1-1~rpt1).
gcc-avr is already the newest version (1:5.4.0+Atmel3.6.1-1~rpt1).
0 upgraded, 0 newly installed, 0 to remove and 113 not upgraded.
###### Updating python virtual environment...
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Requirement already satisfied: cffi==1.6.0 in /home/pi/klippy-env/lib/python2.7/site-packages (1.6.0)
Requirement already satisfied: pyserial==3.2.1 in /home/pi/klippy-env/lib/python2.7/site-packages (3.2.1)
Requirement already satisfied: greenlet==0.4.10 in /home/pi/klippy-env/lib/python2.7/site-packages (0.4.10)
Requirement already satisfied: pycparser in /home/pi/klippy-env/lib/python2.7/site-packages (from cffi==1.6.0) (2.19)
###### Launching Klipper host software...
[ ok ] Restarting klipper (via systemctl): klipper.service.
Build Kconfig config file
Creating symbolic link out/board
Compiling out/src/sched.o
Compiling out/src/command.o
Compiling out/src/basecmd.o
Compiling out/src/debugcmds.o
Compiling out/src/gpiocmds.o
Compiling out/src/stepper.o
Compiling out/src/endstop.o
Compiling out/src/adccmds.o
Compiling out/src/spicmds.o
Compiling out/src/thermocouple.o
Compiling out/src/i2ccmds.o
Compiling out/src/pwmcmds.o
Compiling out/src/lcd_st7920.o
Compiling out/src/lcd_hd44780.o
Compiling out/src/buttons.o
Compiling out/src/tmcuart.o
Compiling out/src/avr/main.o
Compiling out/src/avr/timer.o
Compiling out/src/avr/gpio.o
Compiling out/src/avr/adc.o
Compiling out/src/avr/spi.o
Compiling out/src/avr/i2c.o
Compiling out/src/avr/hard_pwm.o
Compiling out/src/avr/watchdog.o
Compiling out/src/avr/serial.o
Compiling out/src/generic/serial_irq.o
Building out/compile_time_request.o
Version: v0.7.0-31-g186d815-20190106_043823-octopi
Linking out/klipper.elf
Creating hex file out/klipper.elf.hex
Flashing out/klipper.elf.hex to /dev/ttyUSB0 via avrdude
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0x1e9705 (probably m1284p)
avrdude: reading input file "out/klipper.elf.hex"
avrdude: writing flash (20500 bytes):
Writing | ################################################## | 100% 3.87s
avrdude: 20500 bytes of flash written
avrdude: verifying flash memory against out/klipper.elf.hex:
avrdude: load data flash data from input file out/klipper.elf.hex:
avrdude: input file out/klipper.elf.hex contains 20500 bytes
avrdude: reading on-chip flash data:
Reading | ################################################## | 100% 4.43s
avrdude: verifying ...
avrdude: 20500 bytes of flash verified
avrdude: safemode: Fuses OK (E:00, H:00, L:00)
avrdude done. Thank you.To update your helper script, simply repeat the installation process above.
You may receive the following in your output if you've failed to set your locale properly:
###### Installing system start script...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "en_US.UTF-8",
LANG = "en_GB.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_GB.UTF-8").Run the following commands to remove the warning. Uncomment en_US.UTF-8 by removing the # before it's entry in the file, then save it. Output provided for reference:
pi@octopi:~ $ sudo nano /etc/locale.gen
pi@octopi:~ $ sudo locale-gen en_US.UTF-8
Generating locales (this might take a while)...
en_GB.UTF-8... done
en_US.UTF-8... done
Generation complete.
pi@octopi:~ $ sudo update-locale en_US.UTF-8PID_CALIBRATE HEATER=extruder TARGET=230PID_CALIBRATE HEATER=heater_bed TARGET=50SET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=1 ACCEL=500
SET_PRESSURE_ADVANCE ADVANCE_LOOKAHEAD_TIME=0
SET_PRESSURE_ADVANCE ADVANCE=0.000
SET_PRESSURE_ADVANCE ADVANCE=0.050
SET_PRESSURE_ADVANCE ADVANCE=0.080- Mark filament 120mm above the entry to extruder.
- Heat up the nozzle to desired printing temperature.
- Home all axis.
- Lift nozzle by 50mm (to make room for the filament!)
- Execute the following commands (one by one)
G92 E0This resets the "extruded material" value to 0.G1 E100 F100This extrudes 100mm filament with 100mm/min.
- Now measure the distance between extruder entry and the mark on the filament. For example, if it is 28mm instead of 20mm (120mm - 100mm) then the extruder is underextruding by 8mm ==> 92mm instead of 100mm. If it shows 15mm then the extruder is OVERextruding by 5mm ==> 105mm.
-
c:= current value inprinter.cfg -
m:= measured left over filament -
d:= desired mm -
n:= new value forprinter.cfg -
((120 - m) / d) * c = n -
((120 - 28) / 100) * 0.010500 = 0,009660 -
(92 / 100) * 0.010500 = 0,009660
For underextrusion, the new value is lower than the old one. Play around with the last two numbers to fine tune.
Information and docs found here.