Front case

• Fix for incorrectly applied tolerance adjustment that made the hexagon insert too tight.

L4/R4

• Fix for incorrectly applied tolerance adjustment that made the part too tight in the Y axis (the walls with the screw holes).
• Increased the screw hole diameter by 0.1mm (since the hole usually becomes smaller when printing the part upright).

Thumbstick

• New thumbstick tight variant with slightly smaller shaft hole.
• Former default thumbstick becomes the loose variant.

Home button

• Fixed export script not rotating properly the small alignment knob.

Buttons

• ABXY button STL is now a single button (it was a bundle of 4).
• Dpad button STL is now a single button (it was a bundle of 4).
• Select button STL is now a single button (it was a bundle of 4).

Triggers

• L1 and R1 and now exported as 2 different STLs, with mirroring pre-applied.
• L4 and R4 and now exported as 2 different STLs, with mirroring pre-applied.
• L2 and R2 and now exported as 2 different STLs (for consistency).

All changes are backwards compatible