Reads a notebook from a file or stdin, strips output and some metadata, and writes the "cleaned" version of the notebook to the original file or stdout.

Intended to be used as a Git filter or pre-commit hook for users who don't want to track output in Git.

Roughly equivalent to the "Clear All Output" command in the notebook UI, but only "visible" to Git: keep your output in the file on disk, but don't commit the output to Git. This helps minimizing diffs and reduce file size.

Originally based on https://gist.github.com/minrk/6176788.

As of version 0.4.0, nbstripout supports Python 3 only. If you need to use Python 2.7, install nbstripout 0.3.10:

pip install nbstripout==0.3.10

This screencast demonstrates the use and working principles behind the nbstripout utility and how to use it as a Git filter:

You can download and install the latest version of nbstripout from the Python package index PyPI as follows:

pip install --upgrade nbstripout

When using the Anaconda Python distribution, install nbstripout via the conda package manager from conda-forge:

conda install -c conda-forge nbstripout

Strip output from IPython / Jupyter / Zeppelin notebook (modifies the file in-place):

nbstripout FILE.ipynb [FILE2.ipynb ...]
nbstripout FILE.zpln

Force processing of non .ipynb files:

nbstripout -f FILE.ipynb.bak

For using Zeppelin mode while processing files with other extensions use:

nbstripout -m zeppelin -f <file.ext>

Write to stdout e.g. to use as part of a shell pipeline:

cat FILE.ipynb | nbstripout > OUT.ipynb
cat FILE.zpln | nbstripout -m zeppelin > OUT.zpln

or

nbstripout -t FILE.ipynb | other-command

Do a dry run and only list which files would have been stripped:

nbstripout --dry-run FILE.ipynb [FILE2.ipynb ...]

or

Do a verification run, which works like dry run but will fail if any files would have been stripped:

nbstripout --verify FILE.ipynb [FILE2.ipynb ...]

Operate on all .ipynb files in the current directory and subdirectories recursively:

find . -name '*.ipynb' -exec nbstripout {} +

Print the version:

nbstripout --version

Show help and usage instructions:

nbstripout --help

Set up the git filter and attributes as described in the manual installation instructions below:

nbstripout --install

Note: The filter is declared as required, meaning the filter must succeed. Failures and misconfigurations will not simply cause the filter to be ignored.

Set up the git filter using .gitattributes:

nbstripout --install --attributes .gitattributes

Specify a different path to the Python interpreter to be used for the git filters (default is the path to the Python interpreter used when nbstripout is installed). This is useful if you have Python installed in different or unusual locations across machines, e.g. /usr/bin/python3 on your machine vs /usr/local/bin/python3 in a container or elsewhere.

nbstripout --install --python python3

Using just python3 lets each machine find its Python itself. However, keep in mind that depending on your setup this might not be the Python version you want or even fail because an absolute path is required.

Set up the git filter in your global ~/.gitconfig:

nbstripout --install --global

Set up the git filter in your system-wide $(prefix)/etc/gitconfig (most installations will require you to sudo):

[sudo] nbstripout --install --system

Remove the git filter and attributes:

nbstripout --uninstall

Remove the git filter from your global ~/.gitconfig and attributes:

nbstripout --uninstall --global

Remove the git filter from your system-wide $(prefix)/etc/gitconfig and attributes:

[sudo] nbstripout --uninstall --system

Remove the git filter and attributes from .gitattributes:

nbstripout --uninstall --attributes .gitattributes

Check if nbstripout is installed in the current repository (exits with code 0 if installed, 1 otherwise):

nbstripout --is-installed

Print status of nbstripout installation in the current repository and configuration summary of filter and attributes if installed (exits with code 0 if installed, 1 otherwise):

nbstripout --status

The following table shows in which files the nbstripout filter and attribute configuration is written to for given extra flags to --install and --uninstall:

Usually, nbstripout is installed per repository so you can choose where to use it or not. You can choose to set the attributes in .gitattributes and commit this file to your repository, however there is no way to have git set up the filters automatically when someone clones a repository. This is by design, to prevent you from executing arbitrary and potentially malicious code when cloning a repository.

To install nbstripout for all your repositories such that you no longer need to run the installation once per repository, install as follows:

mkdir -p ~/.config/git  # This folder may not exist
nbstripout --install --global --attributes=~/.config/git/attributes

This will set up the filters and diff driver in your ~/.gitconfig and instruct git to apply them to any .ipynb file in any repository.

Note that you need to uninstall with the same flags:

nbstripout --uninstall --global --attributes=~/.config/git/attributes

To install nbstripout system-wide so that it applies to all repositories for all users, install as follows (most installations will require you to sudo):

[sudo] nbstripout --install --system

This will set up the filters and diff driver in $(prefix)/etc/gitconfig and instruct git to apply them to any .ipynb file in any repository for any user.

Note that you need to uninstall with the same flags:

[sudo] nbstripout --uninstall --system

nbstripout can be used to rewrite an existing Git repository using git filter-repo to strip output from existing notebooks. This invocation operates on all ipynb files in the repo:

#!/usr/bin/env bash
# get lint-history with callback from https://github.com/newren/git-filter-repo/pull/542
./lint-history.py --relevant 'return filename.endswith(b".ipynb")' --callback '
import json, warnings, nbformat
from nbstripout import strip_output
from nbformat.reader import NotJSONError
try:
    with warnings.catch_warnings():
        warnings.simplefilter("ignore", category=UserWarning)
        notebook = nbformat.reads(blob.data, as_version=nbformat.NO_CONVERT)
    # customize to your needs
    strip_output(notebook, keep_output=False, keep_count=False, keep_id=False, extra_keys=["metadata.widgets","metadata.execution","cell.attachments"], drop_empty_cells=True,  drop_tagged_cells=[],strip_init_cells=False, max_size=0)
    old_len = len(blob.data)
    blob.data = (nbformat.writes(notebook) + "\n").encode("utf-8")
    if old_len != len(blob.data):
        print(change.blob_id, change.filename, old_len, len(blob.data))
except NotJSONError as e:
     print("ERROR", type(e), change.blob_id, change.filename)
'

Drop empty cells i.e. cells where source is either empty or only contains whitespace:

nbstripout --drop-empty-cells

By default nbstripout will keep cells with init_cell: true metadata. To disable this behavior use:

nbstripout --strip-init-cells

In certain conditions it might be handy to remove not only the output, but the entire cell, e.g. when developing exercises.

To drop all cells tagged with "solution" run:

nbstripout --drop-tagged-cells="solution"

The option accepts a list of tags separated by whitespace.

Do not strip the execution count/prompt number:

nbstripout --keep-count

Do not strip outputs that are smaller that a given max size (useful for removing only large outputs like images):

nbstripout --max-size 1k

Do not strip the output, only metadata:

nbstripout --keep-output

Do not reassign the cell ids to be sequential (which is the default behavior):

nbstripout --keep-id

To mark special cells so that the output is not stripped, you can either:

1. Set the keep_output tag on the cell. To do this, enable the tags toolbar (View > Cell Toolbar > Tags) and then add the keep_output tag for each cell you would like to keep the output for.

2. Set the "keep_output": true metadata on the cell. To do this, select the "Edit Metadata" Cell Toolbar, and then use the "Edit Metadata" button on the desired cell to enter something like:

   {
     "keep_output": true,
   }
   

You can also keep output for an entire notebook. This is useful if you want to strip output by default in an automated environment (e.g. CI pipeline), but want to be able to keep outputs for some notebooks. To do so, add the option above to the notebook metadata instead. (You can also explicitly remove outputs from a particular cell in these notebooks by adding a cell-level metadata entry.)

Another use-case is to preserve initialization cells that might load customized CSS etc. critical for the display of the notebook. To support this, we also keep output for cells with:

{
  "init_cell": true,
}

This is the same metadata used by the init_cell nbextension.

The following metadata is stripped by default:

• Notebook metadata: signature, widgets
• Cell metadata: ExecuteTime, collapsed, execution, heading_collapsed, hidden, scrolled

Additional metadata to be stripped can be configured via either

• git config (--global/--system) filter.nbstripout.extrakeys, e.g. :

  git config --global filter.nbstripout.extrakeys '
    metadata.celltoolbar
    metadata.kernelspec
    metadata.language_info.codemirror_mode.version
    metadata.language_info.pygments_lexer
    metadata.language_info.version
    metadata.toc
    metadata.notify_time
    metadata.varInspector
    cell.metadata.heading_collapsed
    cell.metadata.hidden
    cell.metadata.code_folding
    cell.metadata.tags
    cell.metadata.init_cell'
  

• the --extra-keys flag, which takes a space-delimited string as an argument, e.g. :

  --extra-keys="metadata.celltoolbar cell.metadata.heading_collapsed"
  

Note: Only notebook and cell metadata is currently supported and every key specified via filter.nbstripout.extrakeys or --extra-keys must start with metadata. for notebook and cell.metadata. for cell metadata.

You can keep certain metadata that would be stripped by default with either

• git config (--global/--system) filter.nbstripout.keepmetadatakeys, e.g.:

  git config --global filter.nbstripout.keepmetadatakeys '
    cell.metadata.collapsed
    cell.metadata.scrolled'
  

• the --keep-metadata-keys flag, which takes a space-delimited string as an argument, e.g.:

  --keep-metadata-keys="cell.metadata.collapsed cell.metadata.scrolled"
  

Note: Previous versions of Jupyter used metadata.kernel_spec for kernel metadata. Prefer stripping kernelspec entirely: only stripping some attributes inside kernelspec may lead to errors when opening the notebook in Jupyter (see #141).

To exclude specific files or folders from being processed by the nbstripout filters, add the path and exception to your filter specifications defined in .git/info/attributes or .gitattributes:

docs/** filter= diff=

This will disable nbstripout for any file in the docs directory.:

notebooks/Analysis.ipynb filter= diff=

This will disable nbstripout for the file Analysis.ipynb located in the notebooks directory.

To check which attributes a given file has with the current config, run:

git check-attr -a -- path/to/file

For a file to which the filter applies you will see the following:

$ git check-attr -a -- foo.ipynb
foo.ipynb: diff: ipynb
foo.ipynb: filter: nbstripout

For a file in your excluded folder you will see the following:

$ git check-attr -a -- docs/foo.ipynb
foo.ipynb: diff:
foo.ipynb: filter:

Set up a git filter and diff driver using nbstripout as follows:

git config filter.nbstripout.clean '/path/to/nbstripout'
git config filter.nbstripout.smudge cat
git config filter.nbstripout.required true
git config diff.ipynb.textconv '/path/to/nbstripout -t'

This will add a section to the .git/config file of the current repository.

If you want the filter to be installed globally for your user, add the --global flag to the git config invocations above to have the configuration written to your ~/.gitconfig and apply to all repositories.

If you want the filter to be installed system-wide, add the --system flag to the git config invocations above to have the configuration written to $(prefix)/etc/gitconfig and apply to all repositories for all users.

Create a file .gitattributes (if you want it versioned with the repository) or .git/info/attributes (to apply it only to the current repository) with the following content:

*.ipynb filter=nbstripout
*.ipynb diff=ipynb

This instructs git to use the filter named nbstripout and the diff driver named ipynb set up in the git config above for every .ipynb file in the repository.

If you want the attributes be set for .ipynb files in any of your git repositories, add those two lines to ~/.config/git/attributes. Note that this file and the ~/.config/git directory may not exist.

If you want the attributes be set for .ipynb files in any git repository on your system, add those two lines to $(prefix)/etc/gitattributes. Note that this file may not exist.

pre-commit is a framework for managing git pre-commit hooks.

Once you have pre-commit installed, add the following to the .pre-commit-config.yaml in your repository:

repos:
- repo: https://github.com/kynan/nbstripout
  rev: 0.8.1
  hooks:
    - id: nbstripout

Then run pre-commit install to activate the hook.

When passing parameters to the hook, be aware that arguments with spaces such as --extra-keys need to be quoted as a whole:

repos:
- repo: https://github.com/kynan/nbstripout
  rev: 0.8.1
  hooks:
    - id: nbstripout
      args: ['--extra-keys=metadata.celltoolbar cell.metadata.heading_collapsed']

Certain Git workflows are not well supported by nbstripout:

• Local changes to notebook files that are made invisible to Git due to the nbstripout filter do still cause conflicts when attempting to sync upstream changes (git pull, git merge etc.). This is because Git has no way of resolving a conflict caused by a non-stripped local file being merged with a stripped upstream file. Addressing this issue is out of scope for nbstripout. Read more and find workarounds in #108.

Git has no builtin support for listing files a clean or smudge filter operates on. As a workaround, change the setup of your filter in .git/config, ~/.gitconfig or $(prefix)/etc/gitconfig as follows to see the filenames either filter operates on:

[filter "nbstripout"]
    clean  = "f() { echo >&2 \"clean: nbstripout $1\"; nbstripout; }; f %f"
    smudge = "f() { echo >&2 \"smudge: cat $1\"; cat; }; f %f"
    required = true