A ZMK configuration for the Afternoon Labs Breeze keyboard.

1. Fork this repository.
2. Navigate to the keymap editor website and click on the GitHub icon or source on the top left.
   • https://nickcoutsos.github.io/keymap-editor/
3. Login to your GitHub account, follow the instructions, and select your fork.
4. A layout of the keyboard should now be visible and configurations can be made.
5. Once configured click on the "Save" at the top and add a commit message. This will begin to run the GitHub Action.
6. Go to the actions page of your fork.
   • https://github.com/<GH_Username>/breeze-rev1-zmk-config/actions
7. Click on the workflow of the commit message that was added. The workflow should be completed with a green check mark.
8. Download the firmware under "Artifacts" and extract to your desired folder.
9. Connect the left split keyboard to your computer and double click the reset button to put the board into bootloader mode.
10. Drag and drop afternoon_breeze_left-nice_nano_v2-zmk.uf2 from your folder into the NICENANO device. It is normal for an error to occur once the copy is complete.
11. Disconnect the left side and repeat steps 9 and 10 for the right side.
12. Connect your keyboard to a computer by simultaneously clicking both reset buttons to go into pairing mode.