Cam project made with ESP32-S and FreeRTOS.

This project is an adaptation of a project made by DanielStoelzner adapted to be copiled in Unix Systems and with some custom default values. As DanielStoelzner himself has said it's a continuos project:

A combination of the excellent ESP32 MJPEG Multiclient Streaming Server by arkhipenko (arkhipenko/esp32-cam-mjpeg-multiclient), the default ESP32-CAM Web Server Example sans the Face Detection, and including WebOTA (scottchiefbaker/ESP-WebOTA). Settings are stored in NVS via the Preferences library.

Look at the project that originated this one: https://github.com/DanielStoelzner/ESP32-CAM-FreeRTOS

Inside src/ is a file with name home_wifi_multi_template.h. Rename it to home_wifi_multi.h. It is a included file and will contain your network information to allow the device to connect to your router.

From root directory run:

cp ./src/home_wifi_multi_template.h ./src/home_wifi_multi.h

Change the values of SSID1 and PWD1 to your SSID and WiFi Password.

#define SSID1 "" // <- WiFi name
#define PWD1  "" // <- WiFi password

Is highly recommended to use PlatformIO with VS Code. Remember to compile at last one time before upload. The Board needs to be on download mode to the upload to work.

Right after the compilation/upload the board is expected to be in high temperature, at last higher than it will be during normal usage. It will surly affect the performance. Wait a moment before using it to allow the board to dissipate the heat.

• Board: ESP32 Dev Module
• CPU Frequency: 240MHz
• Flash Frequency: 40MHz
• Flash Mode: QIO
• Flash Size: 4MB
• Partition Scheme: Minimal SPIFFS
• PSRAM: Enabled