pipdeptree is a command line utility for displaying the installed python packages in form of a dependency tree. It
works for packages installed globally on a machine as well as in a virtualenv. Since pip freeze shows all dependencies
as a flat list, finding out which are the top level packages and which packages do they depend on requires some effort.
It's also tedious to resolve conflicting dependencies that could have been installed because older version of pip
didn't have true dependency resolution1. pipdeptree can help here by identifying conflicting dependencies
installed in the environment.
To some extent, pipdeptree is inspired by the lein deps :tree command of Leiningen.
pip install pipdeptreepipdeptree has been tested with Python versions 3.7, 3.8, 3.9 and 3.10.
New in ver. 2.0.0
If you want to run pipdeptree in the context of a particular virtualenv, you can specify the --python option. Note
that this capability has been recently added in version 2.0.0.
Alternatively, you may also install pipdeptree inside the virtualenv and then run it from there.
To give you a brief idea, here is the output of pipdeptree compared with pip freeze:
$ pip freeze
Flask==0.10.1
itsdangerous==0.24
Jinja2==2.11.2
-e [email protected]:naiquevin/lookupy.git@cdbe30c160e1c29802df75e145ea4ad903c05386#egg=Lookupy
MarkupSafe==0.22
pipdeptree @ file:///private/tmp/pipdeptree-2.0.0b1-py3-none-any.whl
Werkzeug==0.11.2And now see what pipdeptree outputs,
$ pipdeptree
Warning!!! Possibly conflicting dependencies found:
* Jinja2==2.11.2
- MarkupSafe [required: >=0.23, installed: 0.22]
------------------------------------------------------------------------
Flask==0.10.1
- itsdangerous [required: >=0.21, installed: 0.24]
- Jinja2 [required: >=2.4, installed: 2.11.2]
- MarkupSafe [required: >=0.23, installed: 0.22]
- Werkzeug [required: >=0.7, installed: 0.11.2]
Lookupy==0.1
pipdeptree==2.0.0b1
- pip [required: >=6.0.0, installed: 20.1.1]
setuptools==47.1.1
wheel==0.34.2New in ver. 0.5.0
Yes, there's a --reverse (or simply -r) flag for this. To find out which packages depend on a particular
package(s), it can be combined with --packages option as follows:
$ pipdeptree --reverse --packages itsdangerous,MarkupSafe
Warning!!! Possibly conflicting dependencies found:
* Jinja2==2.11.2
- MarkupSafe [required: >=0.23, installed: 0.22]
------------------------------------------------------------------------
itsdangerous==0.24
- Flask==0.10.1 [requires: itsdangerous>=0.21]
MarkupSafe==0.22
- Jinja2==2.11.2 [requires: MarkupSafe>=0.23]
- Flask==0.10.1 [requires: Jinja2>=2.4]As seen in the above output, pipdeptree by default warns about possible conflicting dependencies. Any package that's
specified as a dependency of multiple packages with different versions is considered as a conflicting dependency.
Conflicting dependencies are possible if older version of pip<=20.2
(without the new resolver2) was ever used to install dependencies at some
point. The warning is printed to stderr instead of stdout and it can be completely silenced by specifying the
-w silence or --warn silence option. On the other hand, it can be made mode strict with --warn fail, in which case
the command will not only print the warnings to stderr but also exit with a non-zero status code. This is useful if you
want to fit this tool into your CI pipeline.
Note: The --warn option is added in version 0.6.0. If you are using an older version, use --nowarn flag to
silence the warnings.
In case any of the packages have circular dependencies (eg. package A depends on package B and package B depends on
package A), then pipdeptree will print warnings about that as well.
$ pipdeptree --exclude pip,pipdeptree,setuptools,wheel
Warning!!! Cyclic dependencies found:
- CircularDependencyA => CircularDependencyB => CircularDependencyA
- CircularDependencyB => CircularDependencyA => CircularDependencyB
------------------------------------------------------------------------
wsgiref==0.1.2
argparse==1.2.1Similar to the warnings about conflicting dependencies, these too are printed to stderr and can be controlled using the
--warn option.
In the above example, you can also see --exclude option which is the opposite of --packages ie. these packages will
be excluded from the output.
If you wish to track only top level packages in your requirements.txt file, it's possible by grep-ing3. only the
top-level lines from the output,
$ pipdeptree --warn silence | grep -E '^\w+'
Flask==0.10.1
gnureadline==8.0.0
Lookupy==0.1
pipdeptree==2.0.0b1
setuptools==47.1.1
wheel==0.34.2There is a problem here though - The output doesn't mention anything about Lookupy being installed as an editable
package (refer to the output of pip freeze above) and information about its source is lost. To fix this, pipdeptree
must be run with a -f or --freeze flag.
$ pipdeptree -f --warn silence | grep -E '^[a-zA-Z0-9\-]+'
Flask==0.10.1
gnureadline==8.0.0
-e [email protected]:naiquevin/lookupy.git@cdbe30c160e1c29802df75e145ea4ad903c05386#egg=Lookupy
pipdeptree @ file:///private/tmp/pipdeptree-2.0.0b1-py3-none-any.whl
setuptools==47.1.1
wheel==0.34.2
$ pipdeptree -f --warn silence | grep -E '^[a-zA-Z0-9\-]+' > requirements.txtThe freeze flag will not prefix child dependencies with hyphens, so you could dump the entire output of pipdeptree -f
to the requirements.txt file thus making it human-friendly (due to indentations) as well as pip-friendly.
$ pipdeptree -f | tee locked-requirements.txt
Flask==0.10.1
itsdangerous==0.24
Jinja2==2.11.2
MarkupSafe==0.23
Werkzeug==0.11.2
gnureadline==8.0.0
-e [email protected]:naiquevin/lookupy.git@cdbe30c160e1c29802df75e145ea4ad903c05386#egg=Lookupy
pipdeptree @ file:///private/tmp/pipdeptree-2.0.0b1-py3-none-any.whl
pip==20.1.1
setuptools==47.1.1
wheel==0.34.2On confirming that there are no conflicting dependencies, you can even treat this as a "lock file" where all packages,
including the transient dependencies will be pinned to their currently installed versions. Note that the
locked-requirements.txt file could end up with duplicate entries. Although pip install wouldn't complain about
that, you can avoid duplicate lines (at the cost of losing indentation) as follows,
$ pipdeptree -f | sed 's/ //g' | sort -u > locked-requirements.txtNew in ver. 0.5.0
It's also possible to have pipdeptree output json representation of the dependency tree so that it may be used as
input to other external tools.
$ pipdeptree --jsonNote that --json will output a flat list of all packages with their immediate dependencies. This is not very useful in
itself. To obtain nested json, use --json-tree
New in ver. 0.11.0
$ pipdeptree --json-treeThe dependency graph can also be visualized using GraphViz:
$ pipdeptree --graph-output dot > dependencies.dot
$ pipdeptree --graph-output pdf > dependencies.pdf
$ pipdeptree --graph-output png > dependencies.png
$ pipdeptree --graph-output svg > dependencies.svgNote that graphviz is an optional dependency ie. required only if you want to use --graph-output. If the version of
graphviz installed in the env is older than 0.18.1, then a warning will be displayed about upgrading graphviz.
Support for older versions of graphviz will be dropped soon.
Since version 2.0.0b1, --package and --reverse flags are supported for all output formats ie. text, json,
json-tree and graph.
In earlier versions, --json, --json-tree and --graph-output options override --package and --reverse.
usage: pipdeptree.py [-h] [-v] [-f] [--python PYTHON] [-a] [-l] [-u]
[-w [{silence,suppress,fail}]] [-r] [-p PACKAGES]
[-e PACKAGES] [-j] [--json-tree]
[--graph-output OUTPUT_FORMAT]
Dependency tree of the installed python packages
optional arguments:
-h, --help show this help message and exit
-v, --version show program's version number and exit
-f, --freeze Print names so as to write freeze files
--python PYTHON Python to use to look for packages in it (default:
where installed)
-a, --all list all deps at top level
-l, --local-only If in a virtualenv that has global access do not show
globally installed packages
-u, --user-only Only show installations in the user site dir
-w [{silence,suppress,fail}], --warn [{silence,suppress,fail}]
Warning control. "suppress" will show warnings but
return 0 whether or not they are present. "silence"
will not show warnings at all and always return 0.
"fail" will show warnings and return 1 if any are
present. The default is "suppress".
-r, --reverse Shows the dependency tree in the reverse fashion ie.
the sub-dependencies are listed with the list of
packages that need them under them.
-p PACKAGES, --packages PACKAGES
Comma separated list of select packages to show in the
output. Wildcards are supported, like 'somepackage.*'.
If set, --all will be ignored.
-e PACKAGES, --exclude PACKAGES
Comma separated list of select packages to exclude
from the output. Wildcards are supported, like
'somepackage.*'. If set, --all will be ignored.
-j, --json Display dependency tree as json. This will yield "raw"
output that may be used by external tools. This option
overrides all other options.
--json-tree Display dependency tree as json which is nested the
same way as the plain text output printed by default.
This option overrides all other options (except
--json).
--graph-output OUTPUT_FORMAT
Print a dependency graph in the specified output
format. Available are all formats supported by
GraphViz, e.g.: dot, jpeg, pdf, png, svgpipdeptreerelies on the internal API ofpip. I fully understand that it's a bad idea but it mostly works! On rare occasions, it breaks when a new version ofpipis out with backward incompatible changes in internal API. So beware if you are using this tool in environments in whichpipversion is unpinned, specially automation or CD/CI pipelines.
pipdeptree merely looks at the installed packages in the current environment using pip, constructs the tree, then
outputs it in the specified format. If you want to generate the dependency tree without installing the packages, then
you need a dependency resolver. You might want to check alternatives such as
pipgrip or poetry.
MIT (See LICENSE)
Footnotes
-
pip version 20.3 has been released in Nov 2020 with the dependency resolver <https://blog.python.org/2020/11/pip-20-3-release-new-resolver.html>_ ↩
-
pip version 20.3 has been released in Nov 2020 with the dependency resolver <https://blog.python.org/2020/11/pip-20-3-release-new-resolver.html>_ ↩
-
If you are on windows (powershell) you can run
pipdeptree --warn silence | Select-String -Pattern '^\w+'instead of grep ↩