23LC1024 are 1 Mbit Serial SRAM devices. The memory is accessed via a simple SPI compatible serial bus.

STM32 HAL-based driver for the AD7124 24-bit Sigma-Delta ADC using interrupt-driven SPI communication.

spi driver for stm32 f4 family of microcontrollers . The library includes two flavor of apis which is blocking and non blocking ( interrupt based ) . library includes Apis to send and receive data .

A very basic bus sniffer and communicator (UART, SPI, I2C)

SPI driver for AVR microcontroller

🎮 PCB designed to interface with an PS2 Controller using SPI Protocol

C-libraries for SPI communication between two Arduino Nano.

GPIO pins as a SPI interface to ADC module (MCP3202) to read analog voltage in channel 0 of MCP3202 and display analog voltage and percentage in LCD using 4 bit interface.

This project is a MCU-based system with password-protected door security, automatic fan control based on temperature, and adaptive LED lighting based on ambient light. It ensures both security and comfort using sensors and motors.

A configurable SPI driver system with web interface for testing and simulating SPI protocol in virtual machines. Features real-time message monitoring, sequence-based responses, and detailed logging.

University of Antioquia. Embedded Systems. SPI communication protocol with an IMU (Innertial Movement Unit)

Demonstrates basic SPI communication on PIC32CM JH devices using MPLAB X and Harmony v3

Simple program written in ANSI C for hardware addressing W25Q16JV flash memory using SPI protocol

This repository contains the codes/device driver projects using STM32F4 - DISC board including for peripherals like GPIO, UART, SPI, I2C, ADC, TIMER... etc

Development of drivers for STM32 MCUs, building on the previous cortex-m-startup project.

first try in making real smart home

This code example demonstrates how to communicate as host and client using SPI protocol in interrupt and polling mode on PIC18F47Q10 with MPLAB MCC Melody.

CH32X033 as a USB multitool that allows you to configure pin, UART, SPI, and I2C settings through a terminal.