MA-7226 [Android_6QP_SD]G-sensor: The intial orientation of 6QP_SD is…

… different with 6Q_SD, 90 degree difference. 100%

The position of MMA8451Q on 6qp board is not the same with 6q.
Correct the init position value in 6qp sabresd dts.

Signed-off-by: zhang sanshan <[email protected]>

Conflicts:
	arch/arm/boot/dts/imx6qp-sabresd.dts

Change-Id: I819a47be1d5ee67748e3b6bf509f5cb7ebb88216

n7.1.2_2.1.0_8mq-ear-20170908

MLK-16374-4: PxP: add AS and PS engine colorkey support

Enable PS and AS colorkey function if user enable and
set colorkey parameters of s0 and overlay buffer.

Signed-off-by: Guoniu.Zhou <[email protected]>

n7.1.2_1.1.0_7ulp-prc-20170519

MLK-14762 ARM: dts: imx6sll-evk: correct gpio pin for lcd power control

EVK board uses KEY_ROW5 pin to control lcd power, which is
different from ARM2 board. This patch fixed it.

Signed-off-by: Robby Cai <[email protected]>
(cherry picked from commit d6a37c7bfe6e2a7de310bf332fc78a4646d319f1)

MLK-14748 clocksource: imx-tpm: Increase the min_delta

The current min_delta for TPM clock event is 2 ticks which
is too small. As the TPM is running at 3MHz, 2 ticks equal
2/3 us. According to our testing, the interrupt latency will
be longer than this min_delta, especially when GPU is running.

This patch changed the min_delta to 300 which give the system
around 100us for interrupt handling in case the "set_next_event"
call is interrupted by other signals.

Also a simple validation code is added before the function returns.

Signed-off-by: Shenwei Wang <[email protected]>
Signed-off-by: Bai Ping <[email protected]>

 n7.1.1_1.1.0_7ulp-ear-20170310

MA-9271-1 Remove unnecessary delay in bt_rfkill

Remove unnecessary delay in bt_rfkill and use sleep instead of sdelay.

Change-Id: I9c44fa8bc137c19db959f5a4915b863e717fb6f1
Signed-off-by: Richard Liu <[email protected]>