Codestin Search App

Thanks to visit codestin.com
Credit goes to docs.agentgg.dev

This page lists every flag for agentgg scan. Run agentgg scan --help to see the same list from the CLI.

Agent selection

Flag	Default	What it does
`-t, --template <value>`	None	Restricts the scan to specific agents: a slug, a `.md` file, a directory, or a `.txt` list. Without it, the scan runs the default catalog.
`--semgrep-rules <dir>`	None	Points to a directory of local semgrep rule files an agent’s `preFilter` can name. It is searched before the catalog’s own rules directory.

Output and identity

Flag	Default	What it does
`-o, --output <path>`	`./scan-results/`	Sets the output directory for findings and scan state.
`--source-id <id>`	The absolute path of the scan root	Sets a stable ID for the scanned source. Resume state is reused when the ID matches. Set it when the scan path changes between runs.

Phases

Flag	Default	What it does
`--validate`	On	Runs a second validation pass on each finding to reduce false positives.
`--no-validate`	Off	Turns off the second validation pass. Findings then ship without a verdict.
`--score`	On	Runs the CVSS 3.1 score phase after detection and validation.
`--no-score`	Off	Turns off the CVSS 3.1 score phase. Findings then ship without a severity score.
`--scope <path>`	The built-in trust-boundary scope	Sets a scope file for the validator. With `--validate`, its rules feed the full classifier. Without `--validate`, it triggers a cheap scope-only check.
`--no-scope`	Off	Turns off the built-in default scope. Trust-boundary rules do not apply during validation.
`--dedup`	On	Runs the de-duplication phase at the end. It groups findings that share a root cause, per file, and marks the non-primary ones.
`--no-dedup`	Off	Turns off the de-duplication phase. All findings from every agent stay in the report.
`--delete-duplicates`	Off	With `--dedup`, removes duplicate findings. The default marks them instead.
`--no-summary`	Off	Skips the markdown report at the end of the run. Findings still save to disk. Render the report later with `agentgg summary`.
`--exclude-false-positives`	Off	Skips the per-finding markdown file for findings the validator marks as false positive. Findings still save to disk.
`--re-recon`	Off	Reruns the recon survey and the precondition plan, even when a cached brief exists for this output directory.
`--no-recon`	Off	Skips the recon survey and the precondition gate. Every agent named with `-t` then runs without a check.

Resume

Flag	Default	What it does
`--rescan`	Off	Re-analyzes files even when a prior run already covered them with the same content.
`--revalidate-all`	Off	Re-validates findings that already have a verdict on disk.
`--rescore`	Off	Re-scores findings that already have a CVSS score on disk.

Scope

Flag	Default	What it does
`--diff <commit>`	None	Restricts the scan to what a commit or a range touched. A bare ref reviews that commit against its parent. `a..b` is the tip-to-tip diff. `a...b` compares the merge base of `a` and `b` against `b`, which matches a pull request review. The working tree does not affect the result.
`--exclude <pattern>`	None	Excludes a path or glob from the scan. Repeat the flag to add more. The scan treats an excluded file as deleted.
`--only <pattern>`	None	Restricts the scan to files that match at least one given glob. Repeat the flag to add more patterns.
`--max-file-size <kb>`	500	Skips files larger than this size, in KB.
`--no-max-file-size`	Off	Removes the file size limit. The scan then reads files of any size.
`--no-default-excludes`	Off	Turns off the built-in exclude set: `node_modules`, `.git`, build directories, lockfiles, and binaries.
`--auto-exclude`	On	Lets the model pick folders to skip before the scan starts, for example tests or generated code.
`--no-auto-exclude`	Off	Turns off automatic folder exclusion. The scan then covers the full tree except your `--exclude` paths.

Limits

Flag	Default	What it does
`--max-files-per-batch <n>`	5	Sets how many candidate files go into one investigation batch.
`--max-anchors-per-batch <n>`	150	Caps the anchor lines in one batch. A file over the cap splits into more than one prompt.
`--no-max-anchors-per-batch`	Off	Removes the anchor cap. The scan never splits a file across batches.
`--max-files-per-agent <n>`	300	Caps the candidate files one agent reviews. The scan drops files past the cap for this run.
`--no-max-files-per-agent`	Off	Removes the per-agent file cap. Each agent then reviews every candidate file.
`--max-batches <n>`	250	Caps the total agent batches for the whole scan. Batches past the cap run on the next scan that reuses the same `--output`.
`--no-max-batches`	Off	Removes the whole-scan batch cap. The scan then runs every batch.
`--concurrency <n>`	5	Sets the maximum LLM sessions that run at the same time for the whole scan.
`--max-turns <n>`	`maxTurnsPerBatch`, else 50 (150 with no file scope)	Sets the maximum tool-use turns for one LLM session, overriding the agent’s own `maxTurnsPerBatch`. It applies to every agent batch, recon, and the validator. See Targeting for how the per-agent default is chosen.

Provider

Flag	Default	What it does
`--provider <name>`	The saved default	Sets the provider for this run only: `anthropic`, `openai`, `ollama`, `bedrock`, `vertex`, or `openrouter`.
`--api-key <key>`	None	Sets a one-time API key for `anthropic`, `openai`, or `openrouter`. The CLI does not save it. For Anthropic, it also accepts an OAuth token.
`--oauth-token <token>`	None	Sets a one-time Anthropic OAuth token. The CLI does not save it.
`--base-url <url>`	None	Sets a one-time Ollama base URL. The CLI does not save it.
`--region <name>`	None	Sets the region for the active provider. For Bedrock it is an AWS region such as `us-east-1`, and it falls back to `$AWS_REGION` or `$AWS_DEFAULT_REGION`. For Vertex AI it is the publisher region pool, such as `global` or `us-central1`.
`--project <id>`	None	Sets the GCP project ID for Vertex AI. Falls back to `$GOOGLE_CLOUD_PROJECT` or `$GCLOUD_PROJECT`.
`--model <name>`	The saved default	Sets a one-time model override for the selected provider. The CLI does not save it.
`--openrouter-routing <json\|file>`	None	Sets an OpenRouter provider-routing block for this run, as inline JSON or a path to a JSON file. OpenRouter only.
`--effort <level>`	None	Sets effort level for tool calls: `low`, `medium`, `high`, or `max`. OpenAI accepts it only on reasoning models. It has no effect on Bedrock, Vertex, or Ollama.
`--thinking <mode>`	None	Sets thinking mode for calls that use tools: `off`, `adaptive`, or `enabled`. Anthropic only; other providers ignore it.

Other

Flag	Default	What it does
`--serve [port]`	Port 3737	Starts a local web UI when the scan finishes. A busy port moves to the next free one.
`-v, --verbose`	Off	Prints more detail during the run.