#include "postgres.h"
#include <signal.h>
#include <sys/time.h>
#include <unistd.h>
#include "access/heapam.h"
#include "access/htup_details.h"
#include "access/multixact.h"
#include "access/reloptions.h"
#include "access/tableam.h"
#include "access/transam.h"
#include "access/xact.h"
#include "catalog/dependency.h"
#include "catalog/namespace.h"
#include "catalog/pg_database.h"
#include "catalog/pg_namespace.h"
#include "commands/vacuum.h"
#include "common/int.h"
#include "lib/ilist.h"
#include "libpq/pqsignal.h"
#include "miscadmin.h"
#include "nodes/makefuncs.h"
#include "pgstat.h"
#include "postmaster/autovacuum.h"
#include "postmaster/interrupt.h"
#include "postmaster/postmaster.h"
#include "storage/aio_subsys.h"
#include "storage/bufmgr.h"
#include "storage/ipc.h"
#include "storage/latch.h"
#include "storage/lmgr.h"
#include "storage/pmsignal.h"
#include "storage/proc.h"
#include "storage/procsignal.h"
#include "storage/smgr.h"
#include "tcop/tcopprot.h"
#include "utils/fmgroids.h"
#include "utils/fmgrprotos.h"
#include "utils/guc_hooks.h"
#include "utils/injection_point.h"
#include "utils/lsyscache.h"
#include "utils/memutils.h"
#include "utils/ps_status.h"
#include "utils/rel.h"
#include "utils/snapmgr.h"
#include "utils/syscache.h"
#include "utils/timeout.h"
#include "utils/timestamp.h"

Include dependency graph for autovacuum.c:

Data Structures
struct	avl_dbase

struct	avw_dbase

struct	av_relation

struct	autovac_table

struct	WorkerInfoData

struct	AutoVacuumWorkItem

struct	AutoVacuumShmemStruct

Macros
#define	MIN_AUTOVAC_SLEEPTIME 100.0 /* milliseconds */

#define	MAX_AUTOVAC_SLEEPTIME 300 /* seconds */

#define	AutoVacNumSignals (AutoVacRebalance + 1)

#define	NUM_WORKITEMS 256

#define	MAX_AUTOVAC_ACTIV_LEN (NAMEDATALEN * 2 + 56)

Typedefs
typedef struct avl_dbase	avl_dbase

typedef struct avw_dbase	avw_dbase

typedef struct av_relation	av_relation

typedef struct autovac_table	autovac_table

typedef struct WorkerInfoData	WorkerInfoData

typedef struct WorkerInfoData *	WorkerInfo

typedef struct AutoVacuumWorkItem	AutoVacuumWorkItem

Enumerations
enum	AutoVacuumSignal { AutoVacForkFailed , AutoVacRebalance }

Functions
static Oid	do_start_worker (void)

static void	ProcessAutoVacLauncherInterrupts (void)

static pg_noreturn void	AutoVacLauncherShutdown (void)

static void	launcher_determine_sleep (bool canlaunch, bool recursing, struct timeval *nap)

static void	launch_worker (TimestampTz now)

static List *	get_database_list (void)

static void	rebuild_database_list (Oid newdb)

static int	db_comparator (const void a, const void b)

static void	autovac_recalculate_workers_for_balance (void)

static void	do_autovacuum (void)

static void	FreeWorkerInfo (int code, Datum arg)

static autovac_table *	table_recheck_autovac (Oid relid, HTAB *table_toast_map, TupleDesc pg_class_desc, int effective_multixact_freeze_max_age)

static void	recheck_relation_needs_vacanalyze (Oid relid, AutoVacOpts avopts, Form_pg_class classForm, int effective_multixact_freeze_max_age, bool dovacuum, bool doanalyze, bool wraparound)

static void	relation_needs_vacanalyze (Oid relid, AutoVacOpts relopts, Form_pg_class classForm, PgStat_StatTabEntry tabentry, int effective_multixact_freeze_max_age, bool dovacuum, bool doanalyze, bool *wraparound)

static void	autovacuum_do_vac_analyze (autovac_table *tab, BufferAccessStrategy bstrategy)

static AutoVacOpts *	extract_autovac_opts (HeapTuple tup, TupleDesc pg_class_desc)

static void	perform_work_item (AutoVacuumWorkItem *workitem)

static void	autovac_report_activity (autovac_table *tab)

static void	autovac_report_workitem (AutoVacuumWorkItem workitem, const char nspname, const char *relname)

static void	avl_sigusr2_handler (SIGNAL_ARGS)

static bool	av_worker_available (void)

static void	check_av_worker_gucs (void)

void	AutoVacLauncherMain (const void *startup_data, size_t startup_data_len)

void	AutoVacWorkerFailed (void)

void	AutoVacWorkerMain (const void *startup_data, size_t startup_data_len)

void	VacuumUpdateCosts (void)

void	AutoVacuumUpdateCostLimit (void)

bool	AutoVacuumingActive (void)

bool	AutoVacuumRequestWork (AutoVacuumWorkItemType type, Oid relationId, BlockNumber blkno)

void	autovac_init (void)

Size	AutoVacuumShmemSize (void)

void	AutoVacuumShmemInit (void)

bool	check_autovacuum_work_mem (int newval, void *extra, GucSource source)

Variables
bool	autovacuum_start_daemon = false

int	autovacuum_worker_slots

int	autovacuum_max_workers

int	autovacuum_work_mem = -1

int	autovacuum_naptime

int	autovacuum_vac_thresh

int	autovacuum_vac_max_thresh

double	autovacuum_vac_scale

int	autovacuum_vac_ins_thresh

double	autovacuum_vac_ins_scale

int	autovacuum_anl_thresh

double	autovacuum_anl_scale

int	autovacuum_freeze_max_age

int	autovacuum_multixact_freeze_max_age

double	autovacuum_vac_cost_delay

int	autovacuum_vac_cost_limit

int	Log_autovacuum_min_duration = 600000

static double	av_storage_param_cost_delay = -1

static int	av_storage_param_cost_limit = -1

static volatile sig_atomic_t	got_SIGUSR2 = false

static TransactionId	recentXid

static MultiXactId	recentMulti

static int	default_freeze_min_age

static int	default_freeze_table_age

static int	default_multixact_freeze_min_age

static int	default_multixact_freeze_table_age

static MemoryContext	AutovacMemCxt

static AutoVacuumShmemStruct *	AutoVacuumShmem

static dlist_head	DatabaseList = DLIST_STATIC_INIT(DatabaseList)

static MemoryContext	DatabaseListCxt = NULL

static WorkerInfo	MyWorkerInfo = NULL

int	AutovacuumLauncherPid = 0

Macro Definition Documentation

◆ AutoVacNumSignals

#define AutoVacNumSignals (AutoVacRebalance + 1)

Definition at line 254 of file autovacuum.c.

◆ MAX_AUTOVAC_ACTIV_LEN

#define MAX_AUTOVAC_ACTIV_LEN (NAMEDATALEN * 2 + 56)

◆ MAX_AUTOVAC_SLEEPTIME

#define MAX_AUTOVAC_SLEEPTIME 300 /* seconds */

Definition at line 139 of file autovacuum.c.

◆ MIN_AUTOVAC_SLEEPTIME

#define MIN_AUTOVAC_SLEEPTIME 100.0 /* milliseconds */

Definition at line 138 of file autovacuum.c.

◆ NUM_WORKITEMS

#define NUM_WORKITEMS 256

Definition at line 272 of file autovacuum.c.

Typedef Documentation

◆ autovac_table

typedef struct autovac_table autovac_table

◆ AutoVacuumWorkItem

typedef struct AutoVacuumWorkItem AutoVacuumWorkItem

◆ av_relation

typedef struct av_relation av_relation

◆ avl_dbase

typedef struct avl_dbase avl_dbase

◆ avw_dbase

typedef struct avw_dbase avw_dbase

◆ WorkerInfo

typedef struct WorkerInfoData* WorkerInfo

Definition at line 241 of file autovacuum.c.

◆ WorkerInfoData

typedef struct WorkerInfoData WorkerInfoData

Enumeration Type Documentation

◆ AutoVacuumSignal

enum AutoVacuumSignal

Enumerator
AutoVacForkFailed
AutoVacRebalance

Definition at line 248 of file autovacuum.c.

{
    AutoVacForkFailed,          /* failed trying to start a worker */
    AutoVacRebalance,           /* rebalance the cost limits */
}           AutoVacuumSignal;

Function Documentation

◆ autovac_init()

void autovac_init ( void )

Definition at line 3362 of file autovacuum.c.

{
    if (!autovacuum_start_daemon)
        return;
    else if (!pgstat_track_counts)
        ereport(WARNING,
                (errmsg("autovacuum not started because of misconfiguration"),
                 errhint("Enable the \"track_counts\" option.")));
    else
        check_av_worker_gucs();
}

References autovacuum_start_daemon, check_av_worker_gucs(), ereport, errhint(), errmsg(), pgstat_track_counts, and WARNING.

Referenced by PostmasterMain().

◆ autovac_recalculate_workers_for_balance()

static void autovac_recalculate_workers_for_balance ( void )

static

Definition at line 1782 of file autovacuum.c.

{
    dlist_iter  iter;
    int         orig_nworkers_for_balance;
    int         nworkers_for_balance = 0;
 
    Assert(LWLockHeldByMe(AutovacuumLock));
 
    orig_nworkers_for_balance =
        pg_atomic_read_u32(&AutoVacuumShmem->av_nworkersForBalance);
 
    dlist_foreach(iter, &AutoVacuumShmem->av_runningWorkers)
    {
        WorkerInfo  worker = dlist_container(WorkerInfoData, wi_links, iter.cur);
 
        if (worker->wi_proc == NULL ||
            pg_atomic_unlocked_test_flag(&worker->wi_dobalance))
            continue;
 
        nworkers_for_balance++;
    }
 
    if (nworkers_for_balance != orig_nworkers_for_balance)
        pg_atomic_write_u32(&AutoVacuumShmem->av_nworkersForBalance,
                            nworkers_for_balance);
}

References Assert(), AutoVacuumShmem, AutoVacuumShmemStruct::av_nworkersForBalance, AutoVacuumShmemStruct::av_runningWorkers, dlist_iter::cur, dlist_container, dlist_foreach, LWLockHeldByMe(), pg_atomic_read_u32(), pg_atomic_unlocked_test_flag(), pg_atomic_write_u32(), WorkerInfoData::wi_dobalance, and WorkerInfoData::wi_proc.

Referenced by AutoVacLauncherMain(), and do_autovacuum().

◆ autovac_report_activity()

static void autovac_report_activity ( autovac_table * tab )

static

Definition at line 3233 of file autovacuum.c.

{
#define MAX_AUTOVAC_ACTIV_LEN (NAMEDATALEN * 2 + 56)
    char        activity[MAX_AUTOVAC_ACTIV_LEN];
    int         len;
 
    /* Report the command and possible options */
    if (tab->at_params.options & VACOPT_VACUUM)
        snprintf(activity, MAX_AUTOVAC_ACTIV_LEN,
                 "autovacuum: VACUUM%s",
                 tab->at_params.options & VACOPT_ANALYZE ? " ANALYZE" : "");
    else
        snprintf(activity, MAX_AUTOVAC_ACTIV_LEN,
                 "autovacuum: ANALYZE");
 
    /*
     * Report the qualified name of the relation.
     */
    len = strlen(activity);
 
    snprintf(activity + len, MAX_AUTOVAC_ACTIV_LEN - len,
             " %s.%s%s", tab->at_nspname, tab->at_relname,
             tab->at_params.is_wraparound ? " (to prevent wraparound)" : "");
 
    /* Set statement_timestamp() to current time for pg_stat_activity */
    SetCurrentStatementStartTimestamp();
 
    pgstat_report_activity(STATE_RUNNING, activity);
}

References autovac_table::at_nspname, autovac_table::at_params, autovac_table::at_relname, VacuumParams::is_wraparound, len, MAX_AUTOVAC_ACTIV_LEN, VacuumParams::options, pgstat_report_activity(), SetCurrentStatementStartTimestamp(), snprintf, STATE_RUNNING, VACOPT_ANALYZE, and VACOPT_VACUUM.

Referenced by autovacuum_do_vac_analyze().

◆ autovac_report_workitem()

static void autovac_report_workitem	(	AutoVacuumWorkItem *	workitem,
		const char *	nspname,
		const char *	relname
	)

static

Definition at line 3268 of file autovacuum.c.

{
    char        activity[MAX_AUTOVAC_ACTIV_LEN + 12 + 2];
    char        blk[12 + 2];
    int         len;
 
    switch (workitem->avw_type)
    {
        case AVW_BRINSummarizeRange:
            snprintf(activity, MAX_AUTOVAC_ACTIV_LEN,
                     "autovacuum: BRIN summarize");
            break;
    }
 
    /*
     * Report the qualified name of the relation, and the block number if any
     */
    len = strlen(activity);
 
    if (BlockNumberIsValid(workitem->avw_blockNumber))
        snprintf(blk, sizeof(blk), " %u", workitem->avw_blockNumber);
    else
        blk[0] = '\0';
 
    snprintf(activity + len, MAX_AUTOVAC_ACTIV_LEN - len,
             " %s.%s%s", nspname, relname, blk);
 
    /* Set statement_timestamp() to current time for pg_stat_activity */
    SetCurrentStatementStartTimestamp();
 
    pgstat_report_activity(STATE_RUNNING, activity);
}

References AutoVacuumWorkItem::avw_blockNumber, AVW_BRINSummarizeRange, AutoVacuumWorkItem::avw_type, BlockNumberIsValid(), len, MAX_AUTOVAC_ACTIV_LEN, pgstat_report_activity(), relname, SetCurrentStatementStartTimestamp(), snprintf, and STATE_RUNNING.

Referenced by perform_work_item().

◆ AutoVacLauncherMain()

void AutoVacLauncherMain	(	const void *	startup_data,
		size_t	startup_data_len
	)

Definition at line 377 of file autovacuum.c.

{
    sigjmp_buf  local_sigjmp_buf;
 
    Assert(startup_data_len == 0);
 
    /* Release postmaster's working memory context */
    if (PostmasterContext)
    {
        MemoryContextDelete(PostmasterContext);
        PostmasterContext = NULL;
    }
 
    MyBackendType = B_AUTOVAC_LAUNCHER;
    init_ps_display(NULL);
 
    ereport(DEBUG1,
            (errmsg_internal("autovacuum launcher started")));
 
    if (PostAuthDelay)
        pg_usleep(PostAuthDelay * 1000000L);
 
    Assert(GetProcessingMode() == InitProcessing);
 
    /*
     * Set up signal handlers.  We operate on databases much like a regular
     * backend, so we use the same signal handling.  See equivalent code in
     * tcop/postgres.c.
     */
    pqsignal(SIGHUP, SignalHandlerForConfigReload);
    pqsignal(SIGINT, StatementCancelHandler);
    pqsignal(SIGTERM, SignalHandlerForShutdownRequest);
    /* SIGQUIT handler was already set up by InitPostmasterChild */
 
    InitializeTimeouts();       /* establishes SIGALRM handler */
 
    pqsignal(SIGPIPE, SIG_IGN);
    pqsignal(SIGUSR1, procsignal_sigusr1_handler);
    pqsignal(SIGUSR2, avl_sigusr2_handler);
    pqsignal(SIGFPE, FloatExceptionHandler);
    pqsignal(SIGCHLD, SIG_DFL);
 
    /*
     * Create a per-backend PGPROC struct in shared memory.  We must do this
     * before we can use LWLocks or access any shared memory.
     */
    InitProcess();
 
    /* Early initialization */
    BaseInit();
 
    InitPostgres(NULL, InvalidOid, NULL, InvalidOid, 0, NULL);
 
    SetProcessingMode(NormalProcessing);
 
    /*
     * Create a memory context that we will do all our work in.  We do this so
     * that we can reset the context during error recovery and thereby avoid
     * possible memory leaks.
     */
    AutovacMemCxt = AllocSetContextCreate(TopMemoryContext,
                                          "Autovacuum Launcher",
                                          ALLOCSET_DEFAULT_SIZES);
    MemoryContextSwitchTo(AutovacMemCxt);
 
    /*
     * If an exception is encountered, processing resumes here.
     *
     * This code is a stripped down version of PostgresMain error recovery.
     *
     * Note that we use sigsetjmp(..., 1), so that the prevailing signal mask
     * (to wit, BlockSig) will be restored when longjmp'ing to here.  Thus,
     * signals other than SIGQUIT will be blocked until we complete error
     * recovery.  It might seem that this policy makes the HOLD_INTERRUPTS()
     * call redundant, but it is not since InterruptPending might be set
     * already.
     */
    if (sigsetjmp(local_sigjmp_buf, 1) != 0)
    {
        /* since not using PG_TRY, must reset error stack by hand */
        error_context_stack = NULL;
 
        /* Prevents interrupts while cleaning up */
        HOLD_INTERRUPTS();
 
        /* Forget any pending QueryCancel or timeout request */
        disable_all_timeouts(false);
        QueryCancelPending = false; /* second to avoid race condition */
 
        /* Report the error to the server log */
        EmitErrorReport();
 
        /* Abort the current transaction in order to recover */
        AbortCurrentTransaction();
 
        /*
         * Release any other resources, for the case where we were not in a
         * transaction.
         */
        LWLockReleaseAll();
        pgstat_report_wait_end();
        pgaio_error_cleanup();
        UnlockBuffers();
        /* this is probably dead code, but let's be safe: */
        if (AuxProcessResourceOwner)
            ReleaseAuxProcessResources(false);
        AtEOXact_Buffers(false);
        AtEOXact_SMgr();
        AtEOXact_Files(false);
        AtEOXact_HashTables(false);
 
        /*
         * Now return to normal top-level context and clear ErrorContext for
         * next time.
         */
        MemoryContextSwitchTo(AutovacMemCxt);
        FlushErrorState();
 
        /* Flush any leaked data in the top-level context */
        MemoryContextReset(AutovacMemCxt);
 
        /* don't leave dangling pointers to freed memory */
        DatabaseListCxt = NULL;
        dlist_init(&DatabaseList);
 
        /* Now we can allow interrupts again */
        RESUME_INTERRUPTS();
 
        /* if in shutdown mode, no need for anything further; just go away */
        if (ShutdownRequestPending)
            AutoVacLauncherShutdown();
 
        /*
         * Sleep at least 1 second after any error.  We don't want to be
         * filling the error logs as fast as we can.
         */
        pg_usleep(1000000L);
    }
 
    /* We can now handle ereport(ERROR) */
    PG_exception_stack = &local_sigjmp_buf;
 
    /* must unblock signals before calling rebuild_database_list */
    sigprocmask(SIG_SETMASK, &UnBlockSig, NULL);
 
    /*
     * Set always-secure search path.  Launcher doesn't connect to a database,
     * so this has no effect.
     */
    SetConfigOption("search_path", "", PGC_SUSET, PGC_S_OVERRIDE);
 
    /*
     * Force zero_damaged_pages OFF in the autovac process, even if it is set
     * in postgresql.conf.  We don't really want such a dangerous option being
     * applied non-interactively.
     */
    SetConfigOption("zero_damaged_pages", "false", PGC_SUSET, PGC_S_OVERRIDE);
 
    /*
     * Force settable timeouts off to avoid letting these settings prevent
     * regular maintenance from being executed.
     */
    SetConfigOption("statement_timeout", "0", PGC_SUSET, PGC_S_OVERRIDE);
    SetConfigOption("transaction_timeout", "0", PGC_SUSET, PGC_S_OVERRIDE);
    SetConfigOption("lock_timeout", "0", PGC_SUSET, PGC_S_OVERRIDE);
    SetConfigOption("idle_in_transaction_session_timeout", "0",
                    PGC_SUSET, PGC_S_OVERRIDE);
 
    /*
     * Force default_transaction_isolation to READ COMMITTED.  We don't want
     * to pay the overhead of serializable mode, nor add any risk of causing
     * deadlocks or delaying other transactions.
     */
    SetConfigOption("default_transaction_isolation", "read committed",
                    PGC_SUSET, PGC_S_OVERRIDE);
 
    /*
     * Even when system is configured to use a different fetch consistency,
     * for autovac we always want fresh stats.
     */
    SetConfigOption("stats_fetch_consistency", "none", PGC_SUSET, PGC_S_OVERRIDE);
 
    /*
     * In emergency mode, just start a worker (unless shutdown was requested)
     * and go away.
     */
    if (!AutoVacuumingActive())
    {
        if (!ShutdownRequestPending)
            do_start_worker();
        proc_exit(0);           /* done */
    }
 
    AutoVacuumShmem->av_launcherpid = MyProcPid;
 
    /*
     * Create the initial database list.  The invariant we want this list to
     * keep is that it's ordered by decreasing next_worker.  As soon as an
     * entry is updated to a higher time, it will be moved to the front (which
     * is correct because the only operation is to add autovacuum_naptime to
     * the entry, and time always increases).
     */
    rebuild_database_list(InvalidOid);
 
    /* loop until shutdown request */
    while (!ShutdownRequestPending)
    {
        struct timeval nap;
        TimestampTz current_time = 0;
        bool        can_launch;
 
        /*
         * This loop is a bit different from the normal use of WaitLatch,
         * because we'd like to sleep before the first launch of a child
         * process.  So it's WaitLatch, then ResetLatch, then check for
         * wakening conditions.
         */
 
        launcher_determine_sleep(av_worker_available(), false, &nap);
 
        /*
         * Wait until naptime expires or we get some type of signal (all the
         * signal handlers will wake us by calling SetLatch).
         */
        (void) WaitLatch(MyLatch,
                         WL_LATCH_SET | WL_TIMEOUT | WL_EXIT_ON_PM_DEATH,
                         (nap.tv_sec * 1000L) + (nap.tv_usec / 1000L),
                         WAIT_EVENT_AUTOVACUUM_MAIN);
 
        ResetLatch(MyLatch);
 
        ProcessAutoVacLauncherInterrupts();
 
        /*
         * a worker finished, or postmaster signaled failure to start a worker
         */
        if (got_SIGUSR2)
        {
            got_SIGUSR2 = false;
 
            /* rebalance cost limits, if needed */
            if (AutoVacuumShmem->av_signal[AutoVacRebalance])
            {
                LWLockAcquire(AutovacuumLock, LW_EXCLUSIVE);
                AutoVacuumShmem->av_signal[AutoVacRebalance] = false;
                autovac_recalculate_workers_for_balance();
                LWLockRelease(AutovacuumLock);
            }
 
            if (AutoVacuumShmem->av_signal[AutoVacForkFailed])
            {
                /*
                 * If the postmaster failed to start a new worker, we sleep
                 * for a little while and resend the signal.  The new worker's
                 * state is still in memory, so this is sufficient.  After
                 * that, we restart the main loop.
                 *
                 * XXX should we put a limit to the number of times we retry?
                 * I don't think it makes much sense, because a future start
                 * of a worker will continue to fail in the same way.
                 */
                AutoVacuumShmem->av_signal[AutoVacForkFailed] = false;
                pg_usleep(1000000L);    /* 1s */
                SendPostmasterSignal(PMSIGNAL_START_AUTOVAC_WORKER);
                continue;
            }
        }
 
        /*
         * There are some conditions that we need to check before trying to
         * start a worker.  First, we need to make sure that there is a worker
         * slot available.  Second, we need to make sure that no other worker
         * failed while starting up.
         */
 
        current_time = GetCurrentTimestamp();
        LWLockAcquire(AutovacuumLock, LW_SHARED);
 
        can_launch = av_worker_available();
 
        if (AutoVacuumShmem->av_startingWorker != NULL)
        {
            int         waittime;
            WorkerInfo  worker = AutoVacuumShmem->av_startingWorker;
 
            /*
             * We can't launch another worker when another one is still
             * starting up (or failed while doing so), so just sleep for a bit
             * more; that worker will wake us up again as soon as it's ready.
             * We will only wait autovacuum_naptime seconds (up to a maximum
             * of 60 seconds) for this to happen however.  Note that failure
             * to connect to a particular database is not a problem here,
             * because the worker removes itself from the startingWorker
             * pointer before trying to connect.  Problems detected by the
             * postmaster (like fork() failure) are also reported and handled
             * differently.  The only problems that may cause this code to
             * fire are errors in the earlier sections of AutoVacWorkerMain,
             * before the worker removes the WorkerInfo from the
             * startingWorker pointer.
             */
            waittime = Min(autovacuum_naptime, 60) * 1000;
            if (TimestampDifferenceExceeds(worker->wi_launchtime, current_time,
                                           waittime))
            {
                LWLockRelease(AutovacuumLock);
                LWLockAcquire(AutovacuumLock, LW_EXCLUSIVE);
 
                /*
                 * No other process can put a worker in starting mode, so if
                 * startingWorker is still INVALID after exchanging our lock,
                 * we assume it's the same one we saw above (so we don't
                 * recheck the launch time).
                 */
                if (AutoVacuumShmem->av_startingWorker != NULL)
                {
                    worker = AutoVacuumShmem->av_startingWorker;
                    worker->wi_dboid = InvalidOid;
                    worker->wi_tableoid = InvalidOid;
                    worker->wi_sharedrel = false;
                    worker->wi_proc = NULL;
                    worker->wi_launchtime = 0;
                    dclist_push_head(&AutoVacuumShmem->av_freeWorkers,
                                     &worker->wi_links);
                    AutoVacuumShmem->av_startingWorker = NULL;
                    ereport(WARNING,
                            errmsg("autovacuum worker took too long to start; canceled"));
                }
            }
            else
                can_launch = false;
        }
        LWLockRelease(AutovacuumLock);  /* either shared or exclusive */
 
        /* if we can't do anything, just go back to sleep */
        if (!can_launch)
            continue;
 
        /* We're OK to start a new worker */
 
        if (dlist_is_empty(&DatabaseList))
        {
            /*
             * Special case when the list is empty: start a worker right away.
             * This covers the initial case, when no database is in pgstats
             * (thus the list is empty).  Note that the constraints in
             * launcher_determine_sleep keep us from starting workers too
             * quickly (at most once every autovacuum_naptime when the list is
             * empty).
             */
            launch_worker(current_time);
        }
        else
        {
            /*
             * because rebuild_database_list constructs a list with most
             * distant adl_next_worker first, we obtain our database from the
             * tail of the list.
             */
            avl_dbase  *avdb;
 
            avdb = dlist_tail_element(avl_dbase, adl_node, &DatabaseList);
 
            /*
             * launch a worker if next_worker is right now or it is in the
             * past
             */
            if (TimestampDifferenceExceeds(avdb->adl_next_worker,
                                           current_time, 0))
                launch_worker(current_time);
        }
    }
 
    AutoVacLauncherShutdown();
}

References AbortCurrentTransaction(), avl_dbase::adl_next_worker, ALLOCSET_DEFAULT_SIZES, AllocSetContextCreate, Assert(), AtEOXact_Buffers(), AtEOXact_Files(), AtEOXact_HashTables(), AtEOXact_SMgr(), autovac_recalculate_workers_for_balance(), AutoVacForkFailed, AutoVacLauncherShutdown(), AutovacMemCxt, AutoVacRebalance, autovacuum_naptime, AutoVacuumingActive(), AutoVacuumShmem, AuxProcessResourceOwner, AutoVacuumShmemStruct::av_freeWorkers, AutoVacuumShmemStruct::av_launcherpid, AutoVacuumShmemStruct::av_signal, AutoVacuumShmemStruct::av_startingWorker, av_worker_available(), avl_sigusr2_handler(), B_AUTOVAC_LAUNCHER, BaseInit(), DatabaseList, DatabaseListCxt, dclist_push_head(), DEBUG1, disable_all_timeouts(), dlist_init(), dlist_is_empty(), dlist_tail_element, do_start_worker(), EmitErrorReport(), ereport, errmsg(), errmsg_internal(), error_context_stack, FloatExceptionHandler(), FlushErrorState(), GetCurrentTimestamp(), GetProcessingMode, got_SIGUSR2, HOLD_INTERRUPTS, init_ps_display(), InitializeTimeouts(), InitPostgres(), InitProcess(), InitProcessing, InvalidOid, launch_worker(), launcher_determine_sleep(), LW_EXCLUSIVE, LW_SHARED, LWLockAcquire(), LWLockRelease(), LWLockReleaseAll(), MemoryContextDelete(), MemoryContextReset(), MemoryContextSwitchTo(), Min, MyBackendType, MyLatch, MyProcPid, NormalProcessing, PG_exception_stack, pg_usleep(), pgaio_error_cleanup(), PGC_S_OVERRIDE, PGC_SUSET, pgstat_report_wait_end(), PMSIGNAL_START_AUTOVAC_WORKER, PostAuthDelay, PostmasterContext, pqsignal, proc_exit(), ProcessAutoVacLauncherInterrupts(), procsignal_sigusr1_handler(), QueryCancelPending, rebuild_database_list(), ReleaseAuxProcessResources(), ResetLatch(), RESUME_INTERRUPTS, SendPostmasterSignal(), SetConfigOption(), SetProcessingMode, ShutdownRequestPending, SIGCHLD, SIGHUP, SignalHandlerForConfigReload(), SignalHandlerForShutdownRequest(), SIGPIPE, SIGUSR1, SIGUSR2, StatementCancelHandler(), TimestampDifferenceExceeds(), TopMemoryContext, UnBlockSig, UnlockBuffers(), WaitLatch(), WARNING, WorkerInfoData::wi_dboid, WorkerInfoData::wi_launchtime, WorkerInfoData::wi_links, WorkerInfoData::wi_proc, WorkerInfoData::wi_sharedrel, WorkerInfoData::wi_tableoid, WL_EXIT_ON_PM_DEATH, WL_LATCH_SET, and WL_TIMEOUT.

◆ AutoVacLauncherShutdown()

static void AutoVacLauncherShutdown ( void )

static

Definition at line 801 of file autovacuum.c.

{
    ereport(DEBUG1,
            (errmsg_internal("autovacuum launcher shutting down")));
    AutoVacuumShmem->av_launcherpid = 0;
 
    proc_exit(0);               /* done */
}

References AutoVacuumShmem, AutoVacuumShmemStruct::av_launcherpid, DEBUG1, ereport, errmsg_internal(), and proc_exit().

Referenced by AutoVacLauncherMain(), and ProcessAutoVacLauncherInterrupts().

◆ autovacuum_do_vac_analyze()

static void autovacuum_do_vac_analyze	(	autovac_table *	tab,
		BufferAccessStrategy	bstrategy
	)

static

Definition at line 3193 of file autovacuum.c.

{
    RangeVar   *rangevar;
    VacuumRelation *rel;
    List       *rel_list;
    MemoryContext vac_context;
    MemoryContext old_context;
 
    /* Let pgstat know what we're doing */
    autovac_report_activity(tab);
 
    /* Create a context that vacuum() can use as cross-transaction storage */
    vac_context = AllocSetContextCreate(CurrentMemoryContext,
                                        "Vacuum",
                                        ALLOCSET_DEFAULT_SIZES);
 
    /* Set up one VacuumRelation target, identified by OID, for vacuum() */
    old_context = MemoryContextSwitchTo(vac_context);
    rangevar = makeRangeVar(tab->at_nspname, tab->at_relname, -1);
    rel = makeVacuumRelation(rangevar, tab->at_relid, NIL);
    rel_list = list_make1(rel);
    MemoryContextSwitchTo(old_context);
 
    vacuum(rel_list, tab->at_params, bstrategy, vac_context, true);
 
    MemoryContextDelete(vac_context);
}

References ALLOCSET_DEFAULT_SIZES, AllocSetContextCreate, autovac_table::at_nspname, autovac_table::at_params, autovac_table::at_relid, autovac_table::at_relname, autovac_report_activity(), CurrentMemoryContext, list_make1, makeRangeVar(), makeVacuumRelation(), MemoryContextDelete(), MemoryContextSwitchTo(), NIL, and vacuum().

Referenced by do_autovacuum().

◆ AutoVacuumingActive()

bool AutoVacuumingActive ( void )

Definition at line 3308 of file autovacuum.c.

{
    if (!autovacuum_start_daemon || !pgstat_track_counts)
        return false;
    return true;
}

References autovacuum_start_daemon, and pgstat_track_counts.

Referenced by AutoVacLauncherMain(), index_update_stats(), LaunchMissingBackgroundProcesses(), ProcessAutoVacLauncherInterrupts(), and relation_needs_vacanalyze().

◆ AutoVacuumRequestWork()

bool AutoVacuumRequestWork	(	AutoVacuumWorkItemType	type,
		Oid	relationId,
		BlockNumber	blkno
	)

Definition at line 3320 of file autovacuum.c.

{
    int         i;
    bool        result = false;
 
    LWLockAcquire(AutovacuumLock, LW_EXCLUSIVE);
 
    /*
     * Locate an unused work item and fill it with the given data.
     */
    for (i = 0; i < NUM_WORKITEMS; i++)
    {
        AutoVacuumWorkItem *workitem = &AutoVacuumShmem->av_workItems[i];
 
        if (workitem->avw_used)
            continue;
 
        workitem->avw_used = true;
        workitem->avw_active = false;
        workitem->avw_type = type;
        workitem->avw_database = MyDatabaseId;
        workitem->avw_relation = relationId;
        workitem->avw_blockNumber = blkno;
        result = true;
 
        /* done */
        break;
    }
 
    LWLockRelease(AutovacuumLock);
 
    return result;
}

References AutoVacuumShmem, AutoVacuumShmemStruct::av_workItems, AutoVacuumWorkItem::avw_active, AutoVacuumWorkItem::avw_blockNumber, AutoVacuumWorkItem::avw_database, AutoVacuumWorkItem::avw_relation, AutoVacuumWorkItem::avw_type, AutoVacuumWorkItem::avw_used, i, LW_EXCLUSIVE, LWLockAcquire(), LWLockRelease(), MyDatabaseId, NUM_WORKITEMS, and type.

Referenced by brininsert().

◆ AutoVacuumShmemInit()

void AutoVacuumShmemInit ( void )

Definition at line 3398 of file autovacuum.c.

{
    bool        found;
 
    AutoVacuumShmem = (AutoVacuumShmemStruct *)
        ShmemInitStruct("AutoVacuum Data",
                        AutoVacuumShmemSize(),
                        &found);
 
    if (!IsUnderPostmaster)
    {
        WorkerInfo  worker;
        int         i;
 
        Assert(!found);
 
        AutoVacuumShmem->av_launcherpid = 0;
        dclist_init(&AutoVacuumShmem->av_freeWorkers);
        dlist_init(&AutoVacuumShmem->av_runningWorkers);
        AutoVacuumShmem->av_startingWorker = NULL;
        memset(AutoVacuumShmem->av_workItems, 0,
               sizeof(AutoVacuumWorkItem) * NUM_WORKITEMS);
 
        worker = (WorkerInfo) ((char *) AutoVacuumShmem +
                               MAXALIGN(sizeof(AutoVacuumShmemStruct)));
 
        /* initialize the WorkerInfo free list */
        for (i = 0; i < autovacuum_worker_slots; i++)
        {
            dclist_push_head(&AutoVacuumShmem->av_freeWorkers,
                             &worker[i].wi_links);
            pg_atomic_init_flag(&worker[i].wi_dobalance);
        }
 
        pg_atomic_init_u32(&AutoVacuumShmem->av_nworkersForBalance, 0);
 
    }
    else
        Assert(found);
}

References Assert(), autovacuum_worker_slots, AutoVacuumShmem, AutoVacuumShmemSize(), AutoVacuumShmemStruct::av_freeWorkers, AutoVacuumShmemStruct::av_launcherpid, AutoVacuumShmemStruct::av_nworkersForBalance, AutoVacuumShmemStruct::av_runningWorkers, AutoVacuumShmemStruct::av_startingWorker, AutoVacuumShmemStruct::av_workItems, dclist_init(), dclist_push_head(), dlist_init(), i, IsUnderPostmaster, MAXALIGN, NUM_WORKITEMS, pg_atomic_init_flag(), pg_atomic_init_u32(), ShmemInitStruct(), and WorkerInfoData::wi_links.

Referenced by CreateOrAttachShmemStructs().

◆ AutoVacuumShmemSize()

Size AutoVacuumShmemSize ( void )

Definition at line 3379 of file autovacuum.c.

{
    Size        size;
 
    /*
     * Need the fixed struct and the array of WorkerInfoData.
     */
    size = sizeof(AutoVacuumShmemStruct);
    size = MAXALIGN(size);
    size = add_size(size, mul_size(autovacuum_worker_slots,
                                   sizeof(WorkerInfoData)));
    return size;
}

References add_size(), autovacuum_worker_slots, MAXALIGN, and mul_size().

Referenced by AutoVacuumShmemInit(), and CalculateShmemSize().

◆ AutoVacuumUpdateCostLimit()

void AutoVacuumUpdateCostLimit ( void )

Definition at line 1736 of file autovacuum.c.

{
    if (!MyWorkerInfo)
        return;
 
    /*
     * note: in cost_limit, zero also means use value from elsewhere, because
     * zero is not a valid value.
     */
 
    if (av_storage_param_cost_limit > 0)
        vacuum_cost_limit = av_storage_param_cost_limit;
    else
    {
        int         nworkers_for_balance;
 
        if (autovacuum_vac_cost_limit > 0)
            vacuum_cost_limit = autovacuum_vac_cost_limit;
        else
            vacuum_cost_limit = VacuumCostLimit;
 
        /* Only balance limit if no cost-related storage parameters specified */
        if (pg_atomic_unlocked_test_flag(&MyWorkerInfo->wi_dobalance))
            return;
 
        Assert(vacuum_cost_limit > 0);
 
        nworkers_for_balance = pg_atomic_read_u32(&AutoVacuumShmem->av_nworkersForBalance);
 
        /* There is at least 1 autovac worker (this worker) */
        if (nworkers_for_balance <= 0)
            elog(ERROR, "nworkers_for_balance must be > 0");
 
        vacuum_cost_limit = Max(vacuum_cost_limit / nworkers_for_balance, 1);
    }
}

References Assert(), autovacuum_vac_cost_limit, AutoVacuumShmem, AutoVacuumShmemStruct::av_nworkersForBalance, av_storage_param_cost_limit, elog, ERROR, Max, MyWorkerInfo, pg_atomic_read_u32(), pg_atomic_unlocked_test_flag(), vacuum_cost_limit, VacuumCostLimit, and WorkerInfoData::wi_dobalance.

Referenced by vacuum_delay_point(), and VacuumUpdateCosts().

◆ AutoVacWorkerFailed()

void AutoVacWorkerFailed ( void )

Definition at line 1367 of file autovacuum.c.

{
    AutoVacuumShmem->av_signal[AutoVacForkFailed] = true;
}

References AutoVacForkFailed, AutoVacuumShmem, and AutoVacuumShmemStruct::av_signal.

Referenced by StartAutovacuumWorker().

◆ AutoVacWorkerMain()

void AutoVacWorkerMain	(	const void *	startup_data,
		size_t	startup_data_len
	)

Definition at line 1389 of file autovacuum.c.

{
    sigjmp_buf  local_sigjmp_buf;
    Oid         dbid;
 
    Assert(startup_data_len == 0);
 
    /* Release postmaster's working memory context */
    if (PostmasterContext)
    {
        MemoryContextDelete(PostmasterContext);
        PostmasterContext = NULL;
    }
 
    MyBackendType = B_AUTOVAC_WORKER;
    init_ps_display(NULL);
 
    Assert(GetProcessingMode() == InitProcessing);
 
    /*
     * Set up signal handlers.  We operate on databases much like a regular
     * backend, so we use the same signal handling.  See equivalent code in
     * tcop/postgres.c.
     */
    pqsignal(SIGHUP, SignalHandlerForConfigReload);
 
    /*
     * SIGINT is used to signal canceling the current table's vacuum; SIGTERM
     * means abort and exit cleanly, and SIGQUIT means abandon ship.
     */
    pqsignal(SIGINT, StatementCancelHandler);
    pqsignal(SIGTERM, die);
    /* SIGQUIT handler was already set up by InitPostmasterChild */
 
    InitializeTimeouts();       /* establishes SIGALRM handler */
 
    pqsignal(SIGPIPE, SIG_IGN);
    pqsignal(SIGUSR1, procsignal_sigusr1_handler);
    pqsignal(SIGUSR2, SIG_IGN);
    pqsignal(SIGFPE, FloatExceptionHandler);
    pqsignal(SIGCHLD, SIG_DFL);
 
    /*
     * Create a per-backend PGPROC struct in shared memory.  We must do this
     * before we can use LWLocks or access any shared memory.
     */
    InitProcess();
 
    /* Early initialization */
    BaseInit();
 
    /*
     * If an exception is encountered, processing resumes here.
     *
     * Unlike most auxiliary processes, we don't attempt to continue
     * processing after an error; we just clean up and exit.  The autovac
     * launcher is responsible for spawning another worker later.
     *
     * Note that we use sigsetjmp(..., 1), so that the prevailing signal mask
     * (to wit, BlockSig) will be restored when longjmp'ing to here.  Thus,
     * signals other than SIGQUIT will be blocked until we exit.  It might
     * seem that this policy makes the HOLD_INTERRUPTS() call redundant, but
     * it is not since InterruptPending might be set already.
     */
    if (sigsetjmp(local_sigjmp_buf, 1) != 0)
    {
        /* since not using PG_TRY, must reset error stack by hand */
        error_context_stack = NULL;
 
        /* Prevents interrupts while cleaning up */
        HOLD_INTERRUPTS();
 
        /* Report the error to the server log */
        EmitErrorReport();
 
        /*
         * We can now go away.  Note that because we called InitProcess, a
         * callback was registered to do ProcKill, which will clean up
         * necessary state.
         */
        proc_exit(0);
    }
 
    /* We can now handle ereport(ERROR) */
    PG_exception_stack = &local_sigjmp_buf;
 
    sigprocmask(SIG_SETMASK, &UnBlockSig, NULL);
 
    /*
     * Set always-secure search path, so malicious users can't redirect user
     * code (e.g. pg_index.indexprs).  (That code runs in a
     * SECURITY_RESTRICTED_OPERATION sandbox, so malicious users could not
     * take control of the entire autovacuum worker in any case.)
     */
    SetConfigOption("search_path", "", PGC_SUSET, PGC_S_OVERRIDE);
 
    /*
     * Force zero_damaged_pages OFF in the autovac process, even if it is set
     * in postgresql.conf.  We don't really want such a dangerous option being
     * applied non-interactively.
     */
    SetConfigOption("zero_damaged_pages", "false", PGC_SUSET, PGC_S_OVERRIDE);
 
    /*
     * Force settable timeouts off to avoid letting these settings prevent
     * regular maintenance from being executed.
     */
    SetConfigOption("statement_timeout", "0", PGC_SUSET, PGC_S_OVERRIDE);
    SetConfigOption("transaction_timeout", "0", PGC_SUSET, PGC_S_OVERRIDE);
    SetConfigOption("lock_timeout", "0", PGC_SUSET, PGC_S_OVERRIDE);
    SetConfigOption("idle_in_transaction_session_timeout", "0",
                    PGC_SUSET, PGC_S_OVERRIDE);
 
    /*
     * Force default_transaction_isolation to READ COMMITTED.  We don't want
     * to pay the overhead of serializable mode, nor add any risk of causing
     * deadlocks or delaying other transactions.
     */
    SetConfigOption("default_transaction_isolation", "read committed",
                    PGC_SUSET, PGC_S_OVERRIDE);
 
    /*
     * Force synchronous replication off to allow regular maintenance even if
     * we are waiting for standbys to connect. This is important to ensure we
     * aren't blocked from performing anti-wraparound tasks.
     */
    if (synchronous_commit > SYNCHRONOUS_COMMIT_LOCAL_FLUSH)
        SetConfigOption("synchronous_commit", "local",
                        PGC_SUSET, PGC_S_OVERRIDE);
 
    /*
     * Even when system is configured to use a different fetch consistency,
     * for autovac we always want fresh stats.
     */
    SetConfigOption("stats_fetch_consistency", "none", PGC_SUSET, PGC_S_OVERRIDE);
 
    /*
     * Get the info about the database we're going to work on.
     */
    LWLockAcquire(AutovacuumLock, LW_EXCLUSIVE);
 
    /*
     * beware of startingWorker being INVALID; this should normally not
     * happen, but if a worker fails after forking and before this, the
     * launcher might have decided to remove it from the queue and start
     * again.
     */
    if (AutoVacuumShmem->av_startingWorker != NULL)
    {
        MyWorkerInfo = AutoVacuumShmem->av_startingWorker;
        dbid = MyWorkerInfo->wi_dboid;
        MyWorkerInfo->wi_proc = MyProc;
 
        /* insert into the running list */
        dlist_push_head(&AutoVacuumShmem->av_runningWorkers,
                        &MyWorkerInfo->wi_links);
 
        /*
         * remove from the "starting" pointer, so that the launcher can start
         * a new worker if required
         */
        AutoVacuumShmem->av_startingWorker = NULL;
        LWLockRelease(AutovacuumLock);
 
        on_shmem_exit(FreeWorkerInfo, 0);
 
        /* wake up the launcher */
        if (AutoVacuumShmem->av_launcherpid != 0)
            kill(AutoVacuumShmem->av_launcherpid, SIGUSR2);
    }
    else
    {
        /* no worker entry for me, go away */
        elog(WARNING, "autovacuum worker started without a worker entry");
        dbid = InvalidOid;
        LWLockRelease(AutovacuumLock);
    }
 
    if (OidIsValid(dbid))
    {
        char        dbname[NAMEDATALEN];
 
        /*
         * Report autovac startup to the cumulative stats system.  We
         * deliberately do this before InitPostgres, so that the
         * last_autovac_time will get updated even if the connection attempt
         * fails.  This is to prevent autovac from getting "stuck" repeatedly
         * selecting an unopenable database, rather than making any progress
         * on stuff it can connect to.
         */
        pgstat_report_autovac(dbid);
 
        /*
         * Connect to the selected database, specifying no particular user,
         * and ignoring datallowconn.  Collect the database's name for
         * display.
         *
         * Note: if we have selected a just-deleted database (due to using
         * stale stats info), we'll fail and exit here.
         */
        InitPostgres(NULL, dbid, NULL, InvalidOid,
                     INIT_PG_OVERRIDE_ALLOW_CONNS,
                     dbname);
        SetProcessingMode(NormalProcessing);
        set_ps_display(dbname);
        ereport(DEBUG1,
                (errmsg_internal("autovacuum: processing database \"%s\"", dbname)));
 
        if (PostAuthDelay)
            pg_usleep(PostAuthDelay * 1000000L);
 
        /* And do an appropriate amount of work */
        recentXid = ReadNextTransactionId();
        recentMulti = ReadNextMultiXactId();
        do_autovacuum();
    }
 
    /*
     * The launcher will be notified of my death in ProcKill, *if* we managed
     * to get a worker slot at all
     */
 
    /* All done, go away */
    proc_exit(0);
}

References Assert(), AutoVacuumShmem, AutoVacuumShmemStruct::av_launcherpid, AutoVacuumShmemStruct::av_runningWorkers, AutoVacuumShmemStruct::av_startingWorker, B_AUTOVAC_WORKER, BaseInit(), dbname, DEBUG1, die, dlist_push_head(), do_autovacuum(), elog, EmitErrorReport(), ereport, errmsg_internal(), error_context_stack, FloatExceptionHandler(), FreeWorkerInfo(), GetProcessingMode, HOLD_INTERRUPTS, INIT_PG_OVERRIDE_ALLOW_CONNS, init_ps_display(), InitializeTimeouts(), InitPostgres(), InitProcess(), InitProcessing, InvalidOid, kill, LW_EXCLUSIVE, LWLockAcquire(), LWLockRelease(), MemoryContextDelete(), MyBackendType, MyProc, MyWorkerInfo, NAMEDATALEN, NormalProcessing, OidIsValid, on_shmem_exit(), PG_exception_stack, pg_usleep(), PGC_S_OVERRIDE, PGC_SUSET, pgstat_report_autovac(), PostAuthDelay, PostmasterContext, pqsignal, proc_exit(), procsignal_sigusr1_handler(), ReadNextMultiXactId(), ReadNextTransactionId(), recentMulti, recentXid, set_ps_display(), SetConfigOption(), SetProcessingMode, SIGCHLD, SIGHUP, SignalHandlerForConfigReload(), SIGPIPE, SIGUSR1, SIGUSR2, StatementCancelHandler(), synchronous_commit, SYNCHRONOUS_COMMIT_LOCAL_FLUSH, UnBlockSig, WARNING, WorkerInfoData::wi_dboid, WorkerInfoData::wi_links, and WorkerInfoData::wi_proc.

◆ av_worker_available()

static bool av_worker_available ( void )

static

Definition at line 3469 of file autovacuum.c.

{
    int         free_slots;
    int         reserved_slots;
 
    free_slots = dclist_count(&AutoVacuumShmem->av_freeWorkers);
 
    reserved_slots = autovacuum_worker_slots - autovacuum_max_workers;
    reserved_slots = Max(0, reserved_slots);
 
    return free_slots > reserved_slots;
}

References autovacuum_max_workers, autovacuum_worker_slots, AutoVacuumShmem, AutoVacuumShmemStruct::av_freeWorkers, dclist_count(), and Max.

Referenced by AutoVacLauncherMain(), and do_start_worker().

◆ avl_sigusr2_handler()

static void avl_sigusr2_handler ( SIGNAL_ARGS )

static

Definition at line 1374 of file autovacuum.c.

{
    got_SIGUSR2 = true;
    SetLatch(MyLatch);
}

References got_SIGUSR2, MyLatch, and SetLatch().

Referenced by AutoVacLauncherMain().

◆ check_autovacuum_work_mem()

bool check_autovacuum_work_mem	(	int *	newval,
		void **	extra,
		GucSource	source
	)

Definition at line 3443 of file autovacuum.c.

{
    /*
     * -1 indicates fallback.
     *
     * If we haven't yet changed the boot_val default of -1, just let it be.
     * Autovacuum will look to maintenance_work_mem instead.
     */
    if (*newval == -1)
        return true;
 
    /*
     * We clamp manually-set values to at least 64kB.  Since
     * maintenance_work_mem is always set to at least this value, do the same
     * here.
     */
    if (*newval < 64)
        *newval = 64;
 
    return true;
}

References newval.

◆ check_av_worker_gucs()

static void check_av_worker_gucs ( void )

static

Definition at line 3486 of file autovacuum.c.

{
    if (autovacuum_worker_slots < autovacuum_max_workers)
        ereport(WARNING,
                (errcode(ERRCODE_INVALID_PARAMETER_VALUE),
                 errmsg("\"autovacuum_max_workers\" (%d) should be less than or equal to \"autovacuum_worker_slots\" (%d)",
                        autovacuum_max_workers, autovacuum_worker_slots),
                 errdetail("The server will only start up to \"autovacuum_worker_slots\" (%d) autovacuum workers at a given time.",
                           autovacuum_worker_slots)));
}

References autovacuum_max_workers, autovacuum_worker_slots, ereport, errcode(), errdetail(), errmsg(), and WARNING.

Referenced by autovac_init(), and ProcessAutoVacLauncherInterrupts().

◆ db_comparator()

static int db_comparator	(	const void *	a,
		const void *	b
	)

static

Definition at line 1085 of file autovacuum.c.

{
    return pg_cmp_s32(((const avl_dbase *) a)->adl_score,
                      ((const avl_dbase *) b)->adl_score);
}

References a, b, and pg_cmp_s32().

Referenced by rebuild_database_list().

◆ do_autovacuum()

static void do_autovacuum ( void )

static

Definition at line 1898 of file autovacuum.c.

{
    Relation    classRel;
    HeapTuple   tuple;
    TableScanDesc relScan;
    Form_pg_database dbForm;
    List       *table_oids = NIL;
    List       *orphan_oids = NIL;
    HASHCTL     ctl;
    HTAB       *table_toast_map;
    ListCell   *volatile cell;
    BufferAccessStrategy bstrategy;
    ScanKeyData key;
    TupleDesc   pg_class_desc;
    int         effective_multixact_freeze_max_age;
    bool        did_vacuum = false;
    bool        found_concurrent_worker = false;
    int         i;
 
    /*
     * StartTransactionCommand and CommitTransactionCommand will automatically
     * switch to other contexts.  We need this one to keep the list of
     * relations to vacuum/analyze across transactions.
     */
    AutovacMemCxt = AllocSetContextCreate(TopMemoryContext,
                                          "Autovacuum worker",
                                          ALLOCSET_DEFAULT_SIZES);
    MemoryContextSwitchTo(AutovacMemCxt);
 
    /* Start a transaction so our commands have one to play into. */
    StartTransactionCommand();
 
    /*
     * This injection point is put in a transaction block to work with a wait
     * that uses a condition variable.
     */
    INJECTION_POINT("autovacuum-worker-start", NULL);
 
    /*
     * Compute the multixact age for which freezing is urgent.  This is
     * normally autovacuum_multixact_freeze_max_age, but may be less if we are
     * short of multixact member space.
     */
    effective_multixact_freeze_max_age = MultiXactMemberFreezeThreshold();
 
    /*
     * Find the pg_database entry and select the default freeze ages. We use
     * zero in template and nonconnectable databases, else the system-wide
     * default.
     */
    tuple = SearchSysCache1(DATABASEOID, ObjectIdGetDatum(MyDatabaseId));
    if (!HeapTupleIsValid(tuple))
        elog(ERROR, "cache lookup failed for database %u", MyDatabaseId);
    dbForm = (Form_pg_database) GETSTRUCT(tuple);
 
    if (dbForm->datistemplate || !dbForm->datallowconn)
    {
        default_freeze_min_age = 0;
        default_freeze_table_age = 0;
        default_multixact_freeze_min_age = 0;
        default_multixact_freeze_table_age = 0;
    }
    else
    {
        default_freeze_min_age = vacuum_freeze_min_age;
        default_freeze_table_age = vacuum_freeze_table_age;
        default_multixact_freeze_min_age = vacuum_multixact_freeze_min_age;
        default_multixact_freeze_table_age = vacuum_multixact_freeze_table_age;
    }
 
    ReleaseSysCache(tuple);
 
    /* StartTransactionCommand changed elsewhere */
    MemoryContextSwitchTo(AutovacMemCxt);
 
    classRel = table_open(RelationRelationId, AccessShareLock);
 
    /* create a copy so we can use it after closing pg_class */
    pg_class_desc = CreateTupleDescCopy(RelationGetDescr(classRel));
 
    /* create hash table for toast <-> main relid mapping */
    ctl.keysize = sizeof(Oid);
    ctl.entrysize = sizeof(av_relation);
 
    table_toast_map = hash_create("TOAST to main relid map",
                                  100,
                                  &ctl,
                                  HASH_ELEM | HASH_BLOBS);
 
    /*
     * Scan pg_class to determine which tables to vacuum.
     *
     * We do this in two passes: on the first one we collect the list of plain
     * relations and materialized views, and on the second one we collect
     * TOAST tables. The reason for doing the second pass is that during it we
     * want to use the main relation's pg_class.reloptions entry if the TOAST
     * table does not have any, and we cannot obtain it unless we know
     * beforehand what's the main table OID.
     *
     * We need to check TOAST tables separately because in cases with short,
     * wide tables there might be proportionally much more activity in the
     * TOAST table than in its parent.
     */
    relScan = table_beginscan_catalog(classRel, 0, NULL);
 
    /*
     * On the first pass, we collect main tables to vacuum, and also the main
     * table relid to TOAST relid mapping.
     */
    while ((tuple = heap_getnext(relScan, ForwardScanDirection)) != NULL)
    {
        Form_pg_class classForm = (Form_pg_class) GETSTRUCT(tuple);
        PgStat_StatTabEntry *tabentry;
        AutoVacOpts *relopts;
        Oid         relid;
        bool        dovacuum;
        bool        doanalyze;
        bool        wraparound;
 
        if (classForm->relkind != RELKIND_RELATION &&
            classForm->relkind != RELKIND_MATVIEW)
            continue;
 
        relid = classForm->oid;
 
        /*
         * Check if it is a temp table (presumably, of some other backend's).
         * We cannot safely process other backends' temp tables.
         */
        if (classForm->relpersistence == RELPERSISTENCE_TEMP)
        {
            /*
             * We just ignore it if the owning backend is still active and
             * using the temporary schema.  Also, for safety, ignore it if the
             * namespace doesn't exist or isn't a temp namespace after all.
             */
            if (checkTempNamespaceStatus(classForm->relnamespace) == TEMP_NAMESPACE_IDLE)
            {
                /*
                 * The table seems to be orphaned -- although it might be that
                 * the owning backend has already deleted it and exited; our
                 * pg_class scan snapshot is not necessarily up-to-date
                 * anymore, so we could be looking at a committed-dead entry.
                 * Remember it so we can try to delete it later.
                 */
                orphan_oids = lappend_oid(orphan_oids, relid);
            }
            continue;
        }
 
        /* Fetch reloptions and the pgstat entry for this table */
        relopts = extract_autovac_opts(tuple, pg_class_desc);
        tabentry = pgstat_fetch_stat_tabentry_ext(classForm->relisshared,
                                                  relid);
 
        /* Check if it needs vacuum or analyze */
        relation_needs_vacanalyze(relid, relopts, classForm, tabentry,
                                  effective_multixact_freeze_max_age,
                                  &dovacuum, &doanalyze, &wraparound);
 
        /* Relations that need work are added to table_oids */
        if (dovacuum || doanalyze)
            table_oids = lappend_oid(table_oids, relid);
 
        /*
         * Remember TOAST associations for the second pass.  Note: we must do
         * this whether or not the table is going to be vacuumed, because we
         * don't automatically vacuum toast tables along the parent table.
         */
        if (OidIsValid(classForm->reltoastrelid))
        {
            av_relation *hentry;
            bool        found;
 
            hentry = hash_search(table_toast_map,
                                 &classForm->reltoastrelid,
                                 HASH_ENTER, &found);
 
            if (!found)
            {
                /* hash_search already filled in the key */
                hentry->ar_relid = relid;
                hentry->ar_hasrelopts = false;
                if (relopts != NULL)
                {
                    hentry->ar_hasrelopts = true;
                    memcpy(&hentry->ar_reloptions, relopts,
                           sizeof(AutoVacOpts));
                }
            }
        }
 
        /* Release stuff to avoid per-relation leakage */
        if (relopts)
            pfree(relopts);
        if (tabentry)
            pfree(tabentry);
    }
 
    table_endscan(relScan);
 
    /* second pass: check TOAST tables */
    ScanKeyInit(&key,
                Anum_pg_class_relkind,
                BTEqualStrategyNumber, F_CHAREQ,
                CharGetDatum(RELKIND_TOASTVALUE));
 
    relScan = table_beginscan_catalog(classRel, 1, &key);
    while ((tuple = heap_getnext(relScan, ForwardScanDirection)) != NULL)
    {
        Form_pg_class classForm = (Form_pg_class) GETSTRUCT(tuple);
        PgStat_StatTabEntry *tabentry;
        Oid         relid;
        AutoVacOpts *relopts;
        bool        free_relopts = false;
        bool        dovacuum;
        bool        doanalyze;
        bool        wraparound;
 
        /*
         * We cannot safely process other backends' temp tables, so skip 'em.
         */
        if (classForm->relpersistence == RELPERSISTENCE_TEMP)
            continue;
 
        relid = classForm->oid;
 
        /*
         * fetch reloptions -- if this toast table does not have them, try the
         * main rel
         */
        relopts = extract_autovac_opts(tuple, pg_class_desc);
        if (relopts)
            free_relopts = true;
        else
        {
            av_relation *hentry;
            bool        found;
 
            hentry = hash_search(table_toast_map, &relid, HASH_FIND, &found);
            if (found && hentry->ar_hasrelopts)
                relopts = &hentry->ar_reloptions;
        }
 
        /* Fetch the pgstat entry for this table */
        tabentry = pgstat_fetch_stat_tabentry_ext(classForm->relisshared,
                                                  relid);
 
        relation_needs_vacanalyze(relid, relopts, classForm, tabentry,
                                  effective_multixact_freeze_max_age,
                                  &dovacuum, &doanalyze, &wraparound);
 
        /* ignore analyze for toast tables */
        if (dovacuum)
            table_oids = lappend_oid(table_oids, relid);
 
        /* Release stuff to avoid leakage */
        if (free_relopts)
            pfree(relopts);
        if (tabentry)
            pfree(tabentry);
    }
 
    table_endscan(relScan);
    table_close(classRel, AccessShareLock);
 
    /*
     * Recheck orphan temporary tables, and if they still seem orphaned, drop
     * them.  We'll eat a transaction per dropped table, which might seem
     * excessive, but we should only need to do anything as a result of a
     * previous backend crash, so this should not happen often enough to
     * justify "optimizing".  Using separate transactions ensures that we
     * don't bloat the lock table if there are many temp tables to be dropped,
     * and it ensures that we don't lose work if a deletion attempt fails.
     */
    foreach(cell, orphan_oids)
    {
        Oid         relid = lfirst_oid(cell);
        Form_pg_class classForm;
        ObjectAddress object;
 
        /*
         * Check for user-requested abort.
         */
        CHECK_FOR_INTERRUPTS();
 
        /*
         * Try to lock the table.  If we can't get the lock immediately,
         * somebody else is using (or dropping) the table, so it's not our
         * concern anymore.  Having the lock prevents race conditions below.
         */
        if (!ConditionalLockRelationOid(relid, AccessExclusiveLock))
            continue;
 
        /*
         * Re-fetch the pg_class tuple and re-check whether it still seems to
         * be an orphaned temp table.  If it's not there or no longer the same
         * relation, ignore it.
         */
        tuple = SearchSysCacheCopy1(RELOID, ObjectIdGetDatum(relid));
        if (!HeapTupleIsValid(tuple))
        {
            /* be sure to drop useless lock so we don't bloat lock table */
            UnlockRelationOid(relid, AccessExclusiveLock);
            continue;
        }
        classForm = (Form_pg_class) GETSTRUCT(tuple);
 
        /*
         * Make all the same tests made in the loop above.  In event of OID
         * counter wraparound, the pg_class entry we have now might be
         * completely unrelated to the one we saw before.
         */
        if (!((classForm->relkind == RELKIND_RELATION ||
               classForm->relkind == RELKIND_MATVIEW) &&
              classForm->relpersistence == RELPERSISTENCE_TEMP))
        {
            UnlockRelationOid(relid, AccessExclusiveLock);
            continue;
        }
 
        if (checkTempNamespaceStatus(classForm->relnamespace) != TEMP_NAMESPACE_IDLE)
        {
            UnlockRelationOid(relid, AccessExclusiveLock);
            continue;
        }
 
        /*
         * Try to lock the temp namespace, too.  Even though we have lock on
         * the table itself, there's a risk of deadlock against an incoming
         * backend trying to clean out the temp namespace, in case this table
         * has dependencies (such as sequences) that the backend's
         * performDeletion call might visit in a different order.  If we can
         * get AccessShareLock on the namespace, that's sufficient to ensure
         * we're not running concurrently with RemoveTempRelations.  If we
         * can't, back off and let RemoveTempRelations do its thing.
         */
        if (!ConditionalLockDatabaseObject(NamespaceRelationId,
                                           classForm->relnamespace, 0,
                                           AccessShareLock))
        {
            UnlockRelationOid(relid, AccessExclusiveLock);
            continue;
        }
 
        /* OK, let's delete it */
        ereport(LOG,
                (errmsg("autovacuum: dropping orphan temp table \"%s.%s.%s\"",
                        get_database_name(MyDatabaseId),
                        get_namespace_name(classForm->relnamespace),
                        NameStr(classForm->relname))));
 
        /*
         * Deletion might involve TOAST table access, so ensure we have a
         * valid snapshot.
         */
        PushActiveSnapshot(GetTransactionSnapshot());
 
        object.classId = RelationRelationId;
        object.objectId = relid;
        object.objectSubId = 0;
        performDeletion(&object, DROP_CASCADE,
                        PERFORM_DELETION_INTERNAL |
                        PERFORM_DELETION_QUIETLY |
                        PERFORM_DELETION_SKIP_EXTENSIONS);
 
        /*
         * To commit the deletion, end current transaction and start a new
         * one.  Note this also releases the locks we took.
         */
        PopActiveSnapshot();
        CommitTransactionCommand();
        StartTransactionCommand();
 
        /* StartTransactionCommand changed current memory context */
        MemoryContextSwitchTo(AutovacMemCxt);
    }
 
    /*
     * Optionally, create a buffer access strategy object for VACUUM to use.
     * We use the same BufferAccessStrategy object for all tables VACUUMed by
     * this worker to prevent autovacuum from blowing out shared buffers.
     *
     * VacuumBufferUsageLimit being set to 0 results in
     * GetAccessStrategyWithSize returning NULL, effectively meaning we can
     * use up to all of shared buffers.
     *
     * If we later enter failsafe mode on any of the tables being vacuumed, we
     * will cease use of the BufferAccessStrategy only for that table.
     *
     * XXX should we consider adding code to adjust the size of this if
     * VacuumBufferUsageLimit changes?
     */
    bstrategy = GetAccessStrategyWithSize(BAS_VACUUM, VacuumBufferUsageLimit);
 
    /*
     * create a memory context to act as fake PortalContext, so that the
     * contexts created in the vacuum code are cleaned up for each table.
     */
    PortalContext = AllocSetContextCreate(AutovacMemCxt,
                                          "Autovacuum Portal",
                                          ALLOCSET_DEFAULT_SIZES);
 
    /*
     * Perform operations on collected tables.
     */
    foreach(cell, table_oids)
    {
        Oid         relid = lfirst_oid(cell);
        HeapTuple   classTup;
        autovac_table *tab;
        bool        isshared;
        bool        skipit;
        dlist_iter  iter;
 
        CHECK_FOR_INTERRUPTS();
 
        /*
         * Check for config changes before processing each collected table.
         */
        if (ConfigReloadPending)
        {
            ConfigReloadPending = false;
            ProcessConfigFile(PGC_SIGHUP);
 
            /*
             * You might be tempted to bail out if we see autovacuum is now
             * disabled.  Must resist that temptation -- this might be a
             * for-wraparound emergency worker, in which case that would be
             * entirely inappropriate.
             */
        }
 
        /*
         * Find out whether the table is shared or not.  (It's slightly
         * annoying to fetch the syscache entry just for this, but in typical
         * cases it adds little cost because table_recheck_autovac would
         * refetch the entry anyway.  We could buy that back by copying the
         * tuple here and passing it to table_recheck_autovac, but that
         * increases the odds of that function working with stale data.)
         */
        classTup = SearchSysCache1(RELOID, ObjectIdGetDatum(relid));
        if (!HeapTupleIsValid(classTup))
            continue;           /* somebody deleted the rel, forget it */
        isshared = ((Form_pg_class) GETSTRUCT(classTup))->relisshared;
        ReleaseSysCache(classTup);
 
        /*
         * Hold schedule lock from here until we've claimed the table.  We
         * also need the AutovacuumLock to walk the worker array, but that one
         * can just be a shared lock.
         */
        LWLockAcquire(AutovacuumScheduleLock, LW_EXCLUSIVE);
        LWLockAcquire(AutovacuumLock, LW_SHARED);
 
        /*
         * Check whether the table is being vacuumed concurrently by another
         * worker.
         */
        skipit = false;
        dlist_foreach(iter, &AutoVacuumShmem->av_runningWorkers)
        {
            WorkerInfo  worker = dlist_container(WorkerInfoData, wi_links, iter.cur);
 
            /* ignore myself */
            if (worker == MyWorkerInfo)
                continue;
 
            /* ignore workers in other databases (unless table is shared) */
            if (!worker->wi_sharedrel && worker->wi_dboid != MyDatabaseId)
                continue;
 
            if (worker->wi_tableoid == relid)
            {
                skipit = true;
                found_concurrent_worker = true;
                break;
            }
        }
        LWLockRelease(AutovacuumLock);
        if (skipit)
        {
            LWLockRelease(AutovacuumScheduleLock);
            continue;
        }
 
        /*
         * Store the table's OID in shared memory before releasing the
         * schedule lock, so that other workers don't try to vacuum it
         * concurrently.  (We claim it here so as not to hold
         * AutovacuumScheduleLock while rechecking the stats.)
         */
        MyWorkerInfo->wi_tableoid = relid;
        MyWorkerInfo->wi_sharedrel = isshared;
        LWLockRelease(AutovacuumScheduleLock);
 
        /*
         * Check whether pgstat data still says we need to vacuum this table.
         * It could have changed if something else processed the table while
         * we weren't looking. This doesn't entirely close the race condition,
         * but it is very small.
         */
        MemoryContextSwitchTo(AutovacMemCxt);
        tab = table_recheck_autovac(relid, table_toast_map, pg_class_desc,
                                    effective_multixact_freeze_max_age);
        if (tab == NULL)
        {
            /* someone else vacuumed the table, or it went away */
            LWLockAcquire(AutovacuumScheduleLock, LW_EXCLUSIVE);
            MyWorkerInfo->wi_tableoid = InvalidOid;
            MyWorkerInfo->wi_sharedrel = false;
            LWLockRelease(AutovacuumScheduleLock);
            continue;
        }
 
        /*
         * Save the cost-related storage parameter values in global variables
         * for reference when updating vacuum_cost_delay and vacuum_cost_limit
         * during vacuuming this table.
         */
        av_storage_param_cost_delay = tab->at_storage_param_vac_cost_delay;
        av_storage_param_cost_limit = tab->at_storage_param_vac_cost_limit;
 
        /*
         * We only expect this worker to ever set the flag, so don't bother
         * checking the return value. We shouldn't have to retry.
         */
        if (tab->at_dobalance)
            pg_atomic_test_set_flag(&MyWorkerInfo->wi_dobalance);
        else
            pg_atomic_clear_flag(&MyWorkerInfo->wi_dobalance);
 
        LWLockAcquire(AutovacuumLock, LW_SHARED);
        autovac_recalculate_workers_for_balance();
        LWLockRelease(AutovacuumLock);
 
        /*
         * We wait until this point to update cost delay and cost limit
         * values, even though we reloaded the configuration file above, so
         * that we can take into account the cost-related storage parameters.
         */
        VacuumUpdateCosts();
 
 
        /* clean up memory before each iteration */
        MemoryContextReset(PortalContext);
 
        /*
         * Save the relation name for a possible error message, to avoid a
         * catalog lookup in case of an error.  If any of these return NULL,
         * then the relation has been dropped since last we checked; skip it.
         * Note: they must live in a long-lived memory context because we call
         * vacuum and analyze in different transactions.
         */
 
        tab->at_relname = get_rel_name(tab->at_relid);
        tab->at_nspname = get_namespace_name(get_rel_namespace(tab->at_relid));
        tab->at_datname = get_database_name(MyDatabaseId);
        if (!tab->at_relname || !tab->at_nspname || !tab->at_datname)
            goto deleted;
 
        /*
         * We will abort vacuuming the current table if something errors out,
         * and continue with the next one in schedule; in particular, this
         * happens if we are interrupted with SIGINT.
         */
        PG_TRY();
        {
            /* Use PortalContext for any per-table allocations */
            MemoryContextSwitchTo(PortalContext);
 
            /* have at it */
            autovacuum_do_vac_analyze(tab, bstrategy);
 
            /*
             * Clear a possible query-cancel signal, to avoid a late reaction
             * to an automatically-sent signal because of vacuuming the
             * current table (we're done with it, so it would make no sense to
             * cancel at this point.)
             */
            QueryCancelPending = false;
        }
        PG_CATCH();
        {
            /*
             * Abort the transaction, start a new one, and proceed with the
             * next table in our list.
             */
            HOLD_INTERRUPTS();
            if (tab->at_params.options & VACOPT_VACUUM)
                errcontext("automatic vacuum of table \"%s.%s.%s\"",
                           tab->at_datname, tab->at_nspname, tab->at_relname);
            else
                errcontext("automatic analyze of table \"%s.%s.%s\"",
                           tab->at_datname, tab->at_nspname, tab->at_relname);
            EmitErrorReport();
 
            /* this resets ProcGlobal->statusFlags[i] too */
            AbortOutOfAnyTransaction();
            FlushErrorState();
            MemoryContextReset(PortalContext);
 
            /* restart our transaction for the following operations */
            StartTransactionCommand();
            RESUME_INTERRUPTS();
        }
        PG_END_TRY();
 
        /* Make sure we're back in AutovacMemCxt */
        MemoryContextSwitchTo(AutovacMemCxt);
 
        did_vacuum = true;
 
        /* ProcGlobal->statusFlags[i] are reset at the next end of xact */
 
        /* be tidy */
deleted:
        if (tab->at_datname != NULL)
            pfree(tab->at_datname);
        if (tab->at_nspname != NULL)
            pfree(tab->at_nspname);
        if (tab->at_relname != NULL)
            pfree(tab->at_relname);
        pfree(tab);
 
        /*
         * Remove my info from shared memory.  We set wi_dobalance on the
         * assumption that we are more likely than not to vacuum a table with
         * no cost-related storage parameters next, so we want to claim our
         * share of I/O as soon as possible to avoid thrashing the global
         * balance.
         */
        LWLockAcquire(AutovacuumScheduleLock, LW_EXCLUSIVE);
        MyWorkerInfo->wi_tableoid = InvalidOid;
        MyWorkerInfo->wi_sharedrel = false;
        LWLockRelease(AutovacuumScheduleLock);
        pg_atomic_test_set_flag(&MyWorkerInfo->wi_dobalance);
    }
 
    list_free(table_oids);
 
    /*
     * Perform additional work items, as requested by backends.
     */
    LWLockAcquire(AutovacuumLock, LW_EXCLUSIVE);
    for (i = 0; i < NUM_WORKITEMS; i++)
    {
        AutoVacuumWorkItem *workitem = &AutoVacuumShmem->av_workItems[i];
 
        if (!workitem->avw_used)
            continue;
        if (workitem->avw_active)
            continue;
        if (workitem->avw_database != MyDatabaseId)
            continue;
 
        /* claim this one, and release lock while performing it */
        workitem->avw_active = true;
        LWLockRelease(AutovacuumLock);
 
        perform_work_item(workitem);
 
        /*
         * Check for config changes before acquiring lock for further jobs.
         */
        CHECK_FOR_INTERRUPTS();
        if (ConfigReloadPending)
        {
            ConfigReloadPending = false;
            ProcessConfigFile(PGC_SIGHUP);
            VacuumUpdateCosts();
        }
 
        LWLockAcquire(AutovacuumLock, LW_EXCLUSIVE);
 
        /* and mark it done */
        workitem->avw_active = false;
        workitem->avw_used = false;
    }
    LWLockRelease(AutovacuumLock);
 
    /*
     * We leak table_toast_map here (among other things), but since we're
     * going away soon, it's not a problem normally.  But when using Valgrind,
     * release some stuff to reduce complaints about leaked storage.
     */
#ifdef USE_VALGRIND
    hash_destroy(table_toast_map);
    FreeTupleDesc(pg_class_desc);
    if (bstrategy)
        pfree(bstrategy);
#endif
 
    /* Run the rest in xact context, mainly to avoid Valgrind leak warnings */
    MemoryContextSwitchTo(TopTransactionContext);
 
    /*
     * Update pg_database.datfrozenxid, and truncate pg_xact if possible. We
     * only need to do this once, not after each table.
     *
     * Even if we didn't vacuum anything, it may still be important to do
     * this, because one indirect effect of vac_update_datfrozenxid() is to
     * update TransamVariables->xidVacLimit.  That might need to be done even
     * if we haven't vacuumed anything, because relations with older
     * relfrozenxid values or other databases with older datfrozenxid values
     * might have been dropped, allowing xidVacLimit to advance.
     *
     * However, it's also important not to do this blindly in all cases,
     * because when autovacuum=off this will restart the autovacuum launcher.
     * If we're not careful, an infinite loop can result, where workers find
     * no work to do and restart the launcher, which starts another worker in
     * the same database that finds no work to do.  To prevent that, we skip
     * this if (1) we found no work to do and (2) we skipped at least one
     * table due to concurrent autovacuum activity.  In that case, the other
     * worker has already done it, or will do so when it finishes.
     */
    if (did_vacuum || !found_concurrent_worker)
        vac_update_datfrozenxid();
 
    /* Finally close out the last transaction. */
    CommitTransactionCommand();
}

Referenced by AutoVacWorkerMain().

◆ do_start_worker()

static Oid do_start_worker ( void )

static

Definition at line 1103 of file autovacuum.c.

{
    List       *dblist;
    ListCell   *cell;
    TransactionId xidForceLimit;
    MultiXactId multiForceLimit;
    bool        for_xid_wrap;
    bool        for_multi_wrap;
    avw_dbase  *avdb;
    TimestampTz current_time;
    bool        skipit = false;
    Oid         retval = InvalidOid;
    MemoryContext tmpcxt,
                oldcxt;
 
    /* return quickly when there are no free workers */
    LWLockAcquire(AutovacuumLock, LW_SHARED);
    if (!av_worker_available())
    {
        LWLockRelease(AutovacuumLock);
        return InvalidOid;
    }
    LWLockRelease(AutovacuumLock);
 
    /*
     * Create and switch to a temporary context to avoid leaking the memory
     * allocated for the database list.
     */
    tmpcxt = AllocSetContextCreate(CurrentMemoryContext,
                                   "Autovacuum start worker (tmp)",
                                   ALLOCSET_DEFAULT_SIZES);
    oldcxt = MemoryContextSwitchTo(tmpcxt);
 
    /* Get a list of databases */
    dblist = get_database_list();
 
    /*
     * Determine the oldest datfrozenxid/relfrozenxid that we will allow to
     * pass without forcing a vacuum.  (This limit can be tightened for
     * particular tables, but not loosened.)
     */
    recentXid = ReadNextTransactionId();
    xidForceLimit = recentXid - autovacuum_freeze_max_age;
    /* ensure it's a "normal" XID, else TransactionIdPrecedes misbehaves */
    /* this can cause the limit to go backwards by 3, but that's OK */
    if (xidForceLimit < FirstNormalTransactionId)
        xidForceLimit -= FirstNormalTransactionId;
 
    /* Also determine the oldest datminmxid we will consider. */
    recentMulti = ReadNextMultiXactId();
    multiForceLimit = recentMulti - MultiXactMemberFreezeThreshold();
    if (multiForceLimit < FirstMultiXactId)
        multiForceLimit -= FirstMultiXactId;
 
    /*
     * Choose a database to connect to.  We pick the database that was least
     * recently auto-vacuumed, or one that needs vacuuming to prevent Xid
     * wraparound-related data loss.  If any db at risk of Xid wraparound is
     * found, we pick the one with oldest datfrozenxid, independently of
     * autovacuum times; similarly we pick the one with the oldest datminmxid
     * if any is in MultiXactId wraparound.  Note that those in Xid wraparound
     * danger are given more priority than those in multi wraparound danger.
     *
     * Note that a database with no stats entry is not considered, except for
     * Xid wraparound purposes.  The theory is that if no one has ever
     * connected to it since the stats were last initialized, it doesn't need
     * vacuuming.
     *
     * XXX This could be improved if we had more info about whether it needs
     * vacuuming before connecting to it.  Perhaps look through the pgstats
     * data for the database's tables?  One idea is to keep track of the
     * number of new and dead tuples per database in pgstats.  However it
     * isn't clear how to construct a metric that measures that and not cause
     * starvation for less busy databases.
     */
    avdb = NULL;
    for_xid_wrap = false;
    for_multi_wrap = false;
    current_time = GetCurrentTimestamp();
    foreach(cell, dblist)
    {
        avw_dbase  *tmp = lfirst(cell);
        dlist_iter  iter;
 
        /* Check to see if this one is at risk of wraparound */
        if (TransactionIdPrecedes(tmp->adw_frozenxid, xidForceLimit))
        {
            if (avdb == NULL ||
                TransactionIdPrecedes(tmp->adw_frozenxid,
                                      avdb->adw_frozenxid))
                avdb = tmp;
            for_xid_wrap = true;
            continue;
        }
        else if (for_xid_wrap)
            continue;           /* ignore not-at-risk DBs */
        else if (MultiXactIdPrecedes(tmp->adw_minmulti, multiForceLimit))
        {
            if (avdb == NULL ||
                MultiXactIdPrecedes(tmp->adw_minmulti, avdb->adw_minmulti))
                avdb = tmp;
            for_multi_wrap = true;
            continue;
        }
        else if (for_multi_wrap)
            continue;           /* ignore not-at-risk DBs */
 
        /* Find pgstat entry if any */
        tmp->adw_entry = pgstat_fetch_stat_dbentry(tmp->adw_datid);
 
        /*
         * Skip a database with no pgstat entry; it means it hasn't seen any
         * activity.
         */
        if (!tmp->adw_entry)
            continue;
 
        /*
         * Also, skip a database that appears on the database list as having
         * been processed recently (less than autovacuum_naptime seconds ago).
         * We do this so that we don't select a database which we just
         * selected, but that pgstat hasn't gotten around to updating the last
         * autovacuum time yet.
         */
        skipit = false;
 
        dlist_reverse_foreach(iter, &DatabaseList)
        {
            avl_dbase  *dbp = dlist_container(avl_dbase, adl_node, iter.cur);
 
            if (dbp->adl_datid == tmp->adw_datid)
            {
                /*
                 * Skip this database if its next_worker value falls between
                 * the current time and the current time plus naptime.
                 */
                if (!TimestampDifferenceExceeds(dbp->adl_next_worker,
                                                current_time, 0) &&
                    !TimestampDifferenceExceeds(current_time,
                                                dbp->adl_next_worker,
                                                autovacuum_naptime * 1000))
                    skipit = true;
 
                break;
            }
        }
        if (skipit)
            continue;
 
        /*
         * Remember the db with oldest autovac time.  (If we are here, both
         * tmp->entry and db->entry must be non-null.)
         */
        if (avdb == NULL ||
            tmp->adw_entry->last_autovac_time < avdb->adw_entry->last_autovac_time)
            avdb = tmp;
    }
 
    /* Found a database -- process it */
    if (avdb != NULL)
    {
        WorkerInfo  worker;
        dlist_node *wptr;
 
        LWLockAcquire(AutovacuumLock, LW_EXCLUSIVE);
 
        /*
         * Get a worker entry from the freelist.  We checked above, so there
         * really should be a free slot.
         */
        wptr = dclist_pop_head_node(&AutoVacuumShmem->av_freeWorkers);
 
        worker = dlist_container(WorkerInfoData, wi_links, wptr);
        worker->wi_dboid = avdb->adw_datid;
        worker->wi_proc = NULL;
        worker->wi_launchtime = GetCurrentTimestamp();
 
        AutoVacuumShmem->av_startingWorker = worker;
 
        LWLockRelease(AutovacuumLock);
 
        SendPostmasterSignal(PMSIGNAL_START_AUTOVAC_WORKER);
 
        retval = avdb->adw_datid;
    }
    else if (skipit)
    {
        /*
         * If we skipped all databases on the list, rebuild it, because it
         * probably contains a dropped database.
         */
        rebuild_database_list(InvalidOid);
    }
 
    MemoryContextSwitchTo(oldcxt);
    MemoryContextDelete(tmpcxt);
 
    return retval;
}

References avl_dbase::adl_datid, avl_dbase::adl_next_worker, avw_dbase::adw_datid, avw_dbase::adw_entry, avw_dbase::adw_frozenxid, avw_dbase::adw_minmulti, ALLOCSET_DEFAULT_SIZES, AllocSetContextCreate, autovacuum_freeze_max_age, autovacuum_naptime, AutoVacuumShmem, AutoVacuumShmemStruct::av_freeWorkers, AutoVacuumShmemStruct::av_startingWorker, av_worker_available(), dlist_iter::cur, CurrentMemoryContext, DatabaseList, dblist, dclist_pop_head_node(), dlist_container, dlist_reverse_foreach, FirstMultiXactId, FirstNormalTransactionId, get_database_list(), GetCurrentTimestamp(), InvalidOid, PgStat_StatDBEntry::last_autovac_time, lfirst, LW_EXCLUSIVE, LW_SHARED, LWLockAcquire(), LWLockRelease(), MemoryContextDelete(), MemoryContextSwitchTo(), MultiXactIdPrecedes(), MultiXactMemberFreezeThreshold(), pgstat_fetch_stat_dbentry(), PMSIGNAL_START_AUTOVAC_WORKER, ReadNextMultiXactId(), ReadNextTransactionId(), rebuild_database_list(), recentMulti, recentXid, SendPostmasterSignal(), TimestampDifferenceExceeds(), TransactionIdPrecedes(), WorkerInfoData::wi_dboid, WorkerInfoData::wi_launchtime, and WorkerInfoData::wi_proc.

Referenced by AutoVacLauncherMain(), and launch_worker().

◆ extract_autovac_opts()

static AutoVacOpts * extract_autovac_opts	(	HeapTuple	tup,
		TupleDesc	pg_class_desc
	)

static

Definition at line 2739 of file autovacuum.c.

{
    bytea      *relopts;
    AutoVacOpts *av;
 
    Assert(((Form_pg_class) GETSTRUCT(tup))->relkind == RELKIND_RELATION ||
           ((Form_pg_class) GETSTRUCT(tup))->relkind == RELKIND_MATVIEW ||
           ((Form_pg_class) GETSTRUCT(tup))->relkind == RELKIND_TOASTVALUE);
 
    relopts = extractRelOptions(tup, pg_class_desc, NULL);
    if (relopts == NULL)
        return NULL;
 
    av = palloc(sizeof(AutoVacOpts));
    memcpy(av, &(((StdRdOptions *) relopts)->autovacuum), sizeof(AutoVacOpts));
    pfree(relopts);
 
    return av;
}

References Assert(), av, extractRelOptions(), GETSTRUCT(), palloc(), and pfree().

Referenced by do_autovacuum(), and table_recheck_autovac().

◆ FreeWorkerInfo()

static void FreeWorkerInfo	(	int	code,
		Datum	arg
	)

static

Definition at line 1619 of file autovacuum.c.

{
    if (MyWorkerInfo != NULL)
    {
        LWLockAcquire(AutovacuumLock, LW_EXCLUSIVE);
 
        /*
         * Wake the launcher up so that he can launch a new worker immediately
         * if required.  We only save the launcher's PID in local memory here;
         * the actual signal will be sent when the PGPROC is recycled.  Note
         * that we always do this, so that the launcher can rebalance the cost
         * limit setting of the remaining workers.
         *
         * We somewhat ignore the risk that the launcher changes its PID
         * between us reading it and the actual kill; we expect ProcKill to be
         * called shortly after us, and we assume that PIDs are not reused too
         * quickly after a process exits.
         */
        AutovacuumLauncherPid = AutoVacuumShmem->av_launcherpid;
 
        dlist_delete(&MyWorkerInfo->wi_links);
        MyWorkerInfo->wi_dboid = InvalidOid;
        MyWorkerInfo->wi_tableoid = InvalidOid;
        MyWorkerInfo->wi_sharedrel = false;
        MyWorkerInfo->wi_proc = NULL;
        MyWorkerInfo->wi_launchtime = 0;
        pg_atomic_clear_flag(&MyWorkerInfo->wi_dobalance);
        dclist_push_head(&AutoVacuumShmem->av_freeWorkers,
                         &MyWorkerInfo->wi_links);
        /* not mine anymore */
        MyWorkerInfo = NULL;
 
        /*
         * now that we're inactive, cause a rebalancing of the surviving
         * workers
         */
        AutoVacuumShmem->av_signal[AutoVacRebalance] = true;
        LWLockRelease(AutovacuumLock);
    }
}

References AutoVacRebalance, AutovacuumLauncherPid, AutoVacuumShmem, AutoVacuumShmemStruct::av_freeWorkers, AutoVacuumShmemStruct::av_launcherpid, AutoVacuumShmemStruct::av_signal, dclist_push_head(), dlist_delete(), InvalidOid, LW_EXCLUSIVE, LWLockAcquire(), LWLockRelease(), MyWorkerInfo, pg_atomic_clear_flag(), WorkerInfoData::wi_dboid, WorkerInfoData::wi_dobalance, WorkerInfoData::wi_launchtime, WorkerInfoData::wi_links, WorkerInfoData::wi_proc, WorkerInfoData::wi_sharedrel, and WorkerInfoData::wi_tableoid.

Referenced by AutoVacWorkerMain().

◆ get_database_list()

static List * get_database_list ( void )

static

Definition at line 1822 of file autovacuum.c.

{
    List       *dblist = NIL;
    Relation    rel;
    TableScanDesc scan;
    HeapTuple   tup;
    MemoryContext resultcxt;
 
    /* This is the context that we will allocate our output data in */
    resultcxt = CurrentMemoryContext;
 
    /*
     * Start a transaction so we can access pg_database.
     */
    StartTransactionCommand();
 
    rel = table_open(DatabaseRelationId, AccessShareLock);
    scan = table_beginscan_catalog(rel, 0, NULL);
 
    while (HeapTupleIsValid(tup = heap_getnext(scan, ForwardScanDirection)))
    {
        Form_pg_database pgdatabase = (Form_pg_database) GETSTRUCT(tup);
        avw_dbase  *avdb;
        MemoryContext oldcxt;
 
        /*
         * If database has partially been dropped, we can't, nor need to,
         * vacuum it.
         */
        if (database_is_invalid_form(pgdatabase))
        {
            elog(DEBUG2,
                 "autovacuum: skipping invalid database \"%s\"",
                 NameStr(pgdatabase->datname));
            continue;
        }
 
        /*
         * Allocate our results in the caller's context, not the
         * transaction's. We do this inside the loop, and restore the original
         * context at the end, so that leaky things like heap_getnext() are
         * not called in a potentially long-lived context.
         */
        oldcxt = MemoryContextSwitchTo(resultcxt);
 
        avdb = (avw_dbase *) palloc(sizeof(avw_dbase));
 
        avdb->adw_datid = pgdatabase->oid;
        avdb->adw_name = pstrdup(NameStr(pgdatabase->datname));
        avdb->adw_frozenxid = pgdatabase->datfrozenxid;
        avdb->adw_minmulti = pgdatabase->datminmxid;
        /* this gets set later: */
        avdb->adw_entry = NULL;
 
        dblist = lappend(dblist, avdb);
        MemoryContextSwitchTo(oldcxt);
    }
 
    table_endscan(scan);
    table_close(rel, AccessShareLock);
 
    CommitTransactionCommand();
 
    /* Be sure to restore caller's memory context */
    MemoryContextSwitchTo(resultcxt);
 
    return dblist;
}

References AccessShareLock, avw_dbase::adw_datid, avw_dbase::adw_entry, avw_dbase::adw_frozenxid, avw_dbase::adw_minmulti, avw_dbase::adw_name, CommitTransactionCommand(), CurrentMemoryContext, database_is_invalid_form(), dblist, DEBUG2, elog, ForwardScanDirection, GETSTRUCT(), heap_getnext(), HeapTupleIsValid, lappend(), MemoryContextSwitchTo(), NameStr, NIL, palloc(), pstrdup(), StartTransactionCommand(), table_beginscan_catalog(), table_close(), table_endscan(), and table_open().

Referenced by do_start_worker(), and rebuild_database_list().

◆ launch_worker()

static void launch_worker ( TimestampTz now )

static

Definition at line 1315 of file autovacuum.c.

{
    Oid         dbid;
    dlist_iter  iter;
 
    dbid = do_start_worker();
    if (OidIsValid(dbid))
    {
        bool        found = false;
 
        /*
         * Walk the database list and update the corresponding entry.  If the
         * database is not on the list, we'll recreate the list.
         */
        dlist_foreach(iter, &DatabaseList)
        {
            avl_dbase  *avdb = dlist_container(avl_dbase, adl_node, iter.cur);
 
            if (avdb->adl_datid == dbid)
            {
                found = true;
 
                /*
                 * add autovacuum_naptime seconds to the current time, and use
                 * that as the new "next_worker" field for this database.
                 */
                avdb->adl_next_worker =
                    TimestampTzPlusMilliseconds(now, autovacuum_naptime * 1000);
 
                dlist_move_head(&DatabaseList, iter.cur);
                break;
            }
        }
 
        /*
         * If the database was not present in the database list, we rebuild
         * the list.  It's possible that the database does not get into the
         * list anyway, for example if it's a database that doesn't have a
         * pgstat entry, but this is not a problem because we don't want to
         * schedule workers regularly into those in any case.
         */
        if (!found)
            rebuild_database_list(dbid);
    }
}

References avl_dbase::adl_datid, avl_dbase::adl_next_worker, autovacuum_naptime, dlist_iter::cur, DatabaseList, dlist_container, dlist_foreach, dlist_move_head(), do_start_worker(), now(), OidIsValid, rebuild_database_list(), and TimestampTzPlusMilliseconds.

Referenced by AutoVacLauncherMain().

◆ launcher_determine_sleep()

static void launcher_determine_sleep	(	bool	canlaunch,
		bool	recursing,
		struct timeval *	nap
	)

static

Definition at line 818 of file autovacuum.c.

{
    /*
     * We sleep until the next scheduled vacuum.  We trust that when the
     * database list was built, care was taken so that no entries have times
     * in the past; if the first entry has too close a next_worker value, or a
     * time in the past, we will sleep a small nominal time.
     */
    if (!canlaunch)
    {
        nap->tv_sec = autovacuum_naptime;
        nap->tv_usec = 0;
    }
    else if (!dlist_is_empty(&DatabaseList))
    {
        TimestampTz current_time = GetCurrentTimestamp();
        TimestampTz next_wakeup;
        avl_dbase  *avdb;
        long        secs;
        int         usecs;
 
        avdb = dlist_tail_element(avl_dbase, adl_node, &DatabaseList);
 
        next_wakeup = avdb->adl_next_worker;
        TimestampDifference(current_time, next_wakeup, &secs, &usecs);
 
        nap->tv_sec = secs;
        nap->tv_usec = usecs;
    }
    else
    {
        /* list is empty, sleep for whole autovacuum_naptime seconds  */
        nap->tv_sec = autovacuum_naptime;
        nap->tv_usec = 0;
    }
 
    /*
     * If the result is exactly zero, it means a database had an entry with
     * time in the past.  Rebuild the list so that the databases are evenly
     * distributed again, and recalculate the time to sleep.  This can happen
     * if there are more tables needing vacuum than workers, and they all take
     * longer to vacuum than autovacuum_naptime.
     *
     * We only recurse once.  rebuild_database_list should always return times
     * in the future, but it seems best not to trust too much on that.
     */
    if (nap->tv_sec == 0 && nap->tv_usec == 0 && !recursing)
    {
        rebuild_database_list(InvalidOid);
        launcher_determine_sleep(canlaunch, true, nap);
        return;
    }
 
    /* The smallest time we'll allow the launcher to sleep. */
    if (nap->tv_sec <= 0 && nap->tv_usec <= MIN_AUTOVAC_SLEEPTIME * 1000)
    {
        nap->tv_sec = 0;
        nap->tv_usec = MIN_AUTOVAC_SLEEPTIME * 1000;
    }
 
    /*
     * If the sleep time is too large, clamp it to an arbitrary maximum (plus
     * any fractional seconds, for simplicity).  This avoids an essentially
     * infinite sleep in strange cases like the system clock going backwards a
     * few years.
     */
    if (nap->tv_sec > MAX_AUTOVAC_SLEEPTIME)
        nap->tv_sec = MAX_AUTOVAC_SLEEPTIME;
}

References avl_dbase::adl_next_worker, autovacuum_naptime, DatabaseList, dlist_is_empty(), dlist_tail_element, GetCurrentTimestamp(), InvalidOid, launcher_determine_sleep(), MAX_AUTOVAC_SLEEPTIME, MIN_AUTOVAC_SLEEPTIME, rebuild_database_list(), and TimestampDifference().

Referenced by AutoVacLauncherMain(), and launcher_determine_sleep().

◆ perform_work_item()

static void perform_work_item ( AutoVacuumWorkItem * workitem )

static

Definition at line 2625 of file autovacuum.c.

{
    char       *cur_datname = NULL;
    char       *cur_nspname = NULL;
    char       *cur_relname = NULL;
 
    /*
     * Note we do not store table info in MyWorkerInfo, since this is not
     * vacuuming proper.
     */
 
    /*
     * Save the relation name for a possible error message, to avoid a catalog
     * lookup in case of an error.  If any of these return NULL, then the
     * relation has been dropped since last we checked; skip it.
     */
    Assert(CurrentMemoryContext == AutovacMemCxt);
 
    cur_relname = get_rel_name(workitem->avw_relation);
    cur_nspname = get_namespace_name(get_rel_namespace(workitem->avw_relation));
    cur_datname = get_database_name(MyDatabaseId);
    if (!cur_relname || !cur_nspname || !cur_datname)
        goto deleted2;
 
    autovac_report_workitem(workitem, cur_nspname, cur_relname);
 
    /* clean up memory before each work item */
    MemoryContextReset(PortalContext);
 
    /*
     * We will abort the current work item if something errors out, and
     * continue with the next one; in particular, this happens if we are
     * interrupted with SIGINT.  Note that this means that the work item list
     * can be lossy.
     */
    PG_TRY();
    {
        /* Use PortalContext for any per-work-item allocations */
        MemoryContextSwitchTo(PortalContext);
 
        /*
         * Have at it.  Functions called here are responsible for any required
         * user switch and sandbox.
         */
        switch (workitem->avw_type)
        {
            case AVW_BRINSummarizeRange:
                DirectFunctionCall2(brin_summarize_range,
                                    ObjectIdGetDatum(workitem->avw_relation),
                                    Int64GetDatum((int64) workitem->avw_blockNumber));
                break;
            default:
                elog(WARNING, "unrecognized work item found: type %d",
                     workitem->avw_type);
                break;
        }
 
        /*
         * Clear a possible query-cancel signal, to avoid a late reaction to
         * an automatically-sent signal because of vacuuming the current table
         * (we're done with it, so it would make no sense to cancel at this
         * point.)
         */
        QueryCancelPending = false;
    }
    PG_CATCH();
    {
        /*
         * Abort the transaction, start a new one, and proceed with the next
         * table in our list.
         */
        HOLD_INTERRUPTS();
        errcontext("processing work entry for relation \"%s.%s.%s\"",
                   cur_datname, cur_nspname, cur_relname);
        EmitErrorReport();
 
        /* this resets ProcGlobal->statusFlags[i] too */
        AbortOutOfAnyTransaction();
        FlushErrorState();
        MemoryContextReset(PortalContext);
 
        /* restart our transaction for the following operations */
        StartTransactionCommand();
        RESUME_INTERRUPTS();
    }
    PG_END_TRY();
 
    /* Make sure we're back in AutovacMemCxt */
    MemoryContextSwitchTo(AutovacMemCxt);
 
    /* We intentionally do not set did_vacuum here */
 
    /* be tidy */
deleted2:
    if (cur_datname)
        pfree(cur_datname);
    if (cur_nspname)
        pfree(cur_nspname);
    if (cur_relname)
        pfree(cur_relname);
}

References AbortOutOfAnyTransaction(), Assert(), autovac_report_workitem(), AutovacMemCxt, AutoVacuumWorkItem::avw_blockNumber, AVW_BRINSummarizeRange, AutoVacuumWorkItem::avw_relation, AutoVacuumWorkItem::avw_type, brin_summarize_range(), CurrentMemoryContext, DirectFunctionCall2, elog, EmitErrorReport(), errcontext, FlushErrorState(), get_database_name(), get_namespace_name(), get_rel_name(), get_rel_namespace(), HOLD_INTERRUPTS, Int64GetDatum(), MemoryContextReset(), MemoryContextSwitchTo(), MyDatabaseId, ObjectIdGetDatum(), pfree(), PG_CATCH, PG_END_TRY, PG_TRY, PortalContext, QueryCancelPending, RESUME_INTERRUPTS, StartTransactionCommand(), and WARNING.

Referenced by do_autovacuum().

◆ ProcessAutoVacLauncherInterrupts()

static void ProcessAutoVacLauncherInterrupts ( void )

static

Definition at line 756 of file autovacuum.c.

{
    /* the normal shutdown case */
    if (ShutdownRequestPending)
        AutoVacLauncherShutdown();
 
    if (ConfigReloadPending)
    {
        int         autovacuum_max_workers_prev = autovacuum_max_workers;
 
        ConfigReloadPending = false;
        ProcessConfigFile(PGC_SIGHUP);
 
        /* shutdown requested in config file? */
        if (!AutoVacuumingActive())
            AutoVacLauncherShutdown();
 
        /*
         * If autovacuum_max_workers changed, emit a WARNING if
         * autovacuum_worker_slots < autovacuum_max_workers.  If it didn't
         * change, skip this to avoid too many repeated log messages.
         */
        if (autovacuum_max_workers_prev != autovacuum_max_workers)
            check_av_worker_gucs();
 
        /* rebuild the list in case the naptime changed */
        rebuild_database_list(InvalidOid);
    }
 
    /* Process barrier events */
    if (ProcSignalBarrierPending)
        ProcessProcSignalBarrier();
 
    /* Perform logging of memory contexts of this process */
    if (LogMemoryContextPending)
        ProcessLogMemoryContextInterrupt();
 
    /* Process sinval catchup interrupts that happened while sleeping */
    ProcessCatchupInterrupt();
}

References AutoVacLauncherShutdown(), autovacuum_max_workers, AutoVacuumingActive(), check_av_worker_gucs(), ConfigReloadPending, InvalidOid, LogMemoryContextPending, PGC_SIGHUP, ProcessCatchupInterrupt(), ProcessConfigFile(), ProcessLogMemoryContextInterrupt(), ProcessProcSignalBarrier(), ProcSignalBarrierPending, rebuild_database_list(), and ShutdownRequestPending.

Referenced by AutoVacLauncherMain().

◆ rebuild_database_list()

static void rebuild_database_list ( Oid newdb )

static

Definition at line 902 of file autovacuum.c.

{
    List       *dblist;
    ListCell   *cell;
    MemoryContext newcxt;
    MemoryContext oldcxt;
    MemoryContext tmpcxt;
    HASHCTL     hctl;
    int         score;
    int         nelems;
    HTAB       *dbhash;
    dlist_iter  iter;
 
    newcxt = AllocSetContextCreate(AutovacMemCxt,
                                   "Autovacuum database list",
                                   ALLOCSET_DEFAULT_SIZES);
    tmpcxt = AllocSetContextCreate(newcxt,
                                   "Autovacuum database list (tmp)",
                                   ALLOCSET_DEFAULT_SIZES);
    oldcxt = MemoryContextSwitchTo(tmpcxt);
 
    /*
     * Implementing this is not as simple as it sounds, because we need to put
     * the new database at the end of the list; next the databases that were
     * already on the list, and finally (at the tail of the list) all the
     * other databases that are not on the existing list.
     *
     * To do this, we build an empty hash table of scored databases.  We will
     * start with the lowest score (zero) for the new database, then
     * increasing scores for the databases in the existing list, in order, and
     * lastly increasing scores for all databases gotten via
     * get_database_list() that are not already on the hash.
     *
     * Then we will put all the hash elements into an array, sort the array by
     * score, and finally put the array elements into the new doubly linked
     * list.
     */
    hctl.keysize = sizeof(Oid);
    hctl.entrysize = sizeof(avl_dbase);
    hctl.hcxt = tmpcxt;
    dbhash = hash_create("autovacuum db hash", 20, &hctl,   /* magic number here
                                                             * FIXME */
                         HASH_ELEM | HASH_BLOBS | HASH_CONTEXT);
 
    /* start by inserting the new database */
    score = 0;
    if (OidIsValid(newdb))
    {
        avl_dbase  *db;
        PgStat_StatDBEntry *entry;
 
        /* only consider this database if it has a pgstat entry */
        entry = pgstat_fetch_stat_dbentry(newdb);
        if (entry != NULL)
        {
            /* we assume it isn't found because the hash was just created */
            db = hash_search(dbhash, &newdb, HASH_ENTER, NULL);
 
            /* hash_search already filled in the key */
            db->adl_score = score++;
            /* next_worker is filled in later */
        }
    }
 
    /* Now insert the databases from the existing list */
    dlist_foreach(iter, &DatabaseList)
    {
        avl_dbase  *avdb = dlist_container(avl_dbase, adl_node, iter.cur);
        avl_dbase  *db;
        bool        found;
        PgStat_StatDBEntry *entry;
 
        /*
         * skip databases with no stat entries -- in particular, this gets rid
         * of dropped databases
         */
        entry = pgstat_fetch_stat_dbentry(avdb->adl_datid);
        if (entry == NULL)
            continue;
 
        db = hash_search(dbhash, &(avdb->adl_datid), HASH_ENTER, &found);
 
        if (!found)
        {
            /* hash_search already filled in the key */
            db->adl_score = score++;
            /* next_worker is filled in later */
        }
    }
 
    /* finally, insert all qualifying databases not previously inserted */
    dblist = get_database_list();
    foreach(cell, dblist)
    {
        avw_dbase  *avdb = lfirst(cell);
        avl_dbase  *db;
        bool        found;
        PgStat_StatDBEntry *entry;
 
        /* only consider databases with a pgstat entry */
        entry = pgstat_fetch_stat_dbentry(avdb->adw_datid);
        if (entry == NULL)
            continue;
 
        db = hash_search(dbhash, &(avdb->adw_datid), HASH_ENTER, &found);
        /* only update the score if the database was not already on the hash */
        if (!found)
        {
            /* hash_search already filled in the key */
            db->adl_score = score++;
            /* next_worker is filled in later */
        }
    }
    nelems = score;
 
    /* from here on, the allocated memory belongs to the new list */
    MemoryContextSwitchTo(newcxt);
    dlist_init(&DatabaseList);
 
    if (nelems > 0)
    {
        TimestampTz current_time;
        int         millis_increment;
        avl_dbase  *dbary;
        avl_dbase  *db;
        HASH_SEQ_STATUS seq;
        int         i;
 
        /* put all the hash elements into an array */
        dbary = palloc(nelems * sizeof(avl_dbase));
        /* keep Valgrind quiet */
#ifdef USE_VALGRIND
        avl_dbase_array = dbary;
#endif
 
        i = 0;
        hash_seq_init(&seq, dbhash);
        while ((db = hash_seq_search(&seq)) != NULL)
            memcpy(&(dbary[i++]), db, sizeof(avl_dbase));
 
        /* sort the array */
        qsort(dbary, nelems, sizeof(avl_dbase), db_comparator);
 
        /*
         * Determine the time interval between databases in the schedule. If
         * we see that the configured naptime would take us to sleep times
         * lower than our min sleep time (which launcher_determine_sleep is
         * coded not to allow), silently use a larger naptime (but don't touch
         * the GUC variable).
         */
        millis_increment = 1000.0 * autovacuum_naptime / nelems;
        if (millis_increment <= MIN_AUTOVAC_SLEEPTIME)
            millis_increment = MIN_AUTOVAC_SLEEPTIME * 1.1;
 
        current_time = GetCurrentTimestamp();
 
        /*
         * move the elements from the array into the dlist, setting the
         * next_worker while walking the array
         */
        for (i = 0; i < nelems; i++)
        {
            db = &(dbary[i]);
 
            current_time = TimestampTzPlusMilliseconds(current_time,
                                                       millis_increment);
            db->adl_next_worker = current_time;
 
            /* later elements should go closer to the head of the list */
            dlist_push_head(&DatabaseList, &db->adl_node);
        }
    }
 
    /* all done, clean up memory */
    if (DatabaseListCxt != NULL)
        MemoryContextDelete(DatabaseListCxt);
    MemoryContextDelete(tmpcxt);
    DatabaseListCxt = newcxt;
    MemoryContextSwitchTo(oldcxt);
}

References avl_dbase::adl_datid, avl_dbase::adl_next_worker, avl_dbase::adl_node, avl_dbase::adl_score, avw_dbase::adw_datid, ALLOCSET_DEFAULT_SIZES, AllocSetContextCreate, AutovacMemCxt, autovacuum_naptime, dlist_iter::cur, DatabaseList, DatabaseListCxt, db_comparator(), dblist, dlist_container, dlist_foreach, dlist_init(), dlist_push_head(), HASHCTL::entrysize, get_database_list(), GetCurrentTimestamp(), HASH_BLOBS, HASH_CONTEXT, hash_create(), HASH_ELEM, HASH_ENTER, hash_search(), hash_seq_init(), hash_seq_search(), HASHCTL::hcxt, i, HASHCTL::keysize, lfirst, MemoryContextDelete(), MemoryContextSwitchTo(), MIN_AUTOVAC_SLEEPTIME, OidIsValid, palloc(), pgstat_fetch_stat_dbentry(), qsort, and TimestampTzPlusMilliseconds.

Referenced by AutoVacLauncherMain(), do_start_worker(), launch_worker(), launcher_determine_sleep(), and ProcessAutoVacLauncherInterrupts().

◆ recheck_relation_needs_vacanalyze()

static void recheck_relation_needs_vacanalyze	(	Oid	relid,
		AutoVacOpts *	avopts,
		Form_pg_class	classForm,
		int	effective_multixact_freeze_max_age,
		bool *	dovacuum,
		bool *	doanalyze,
		bool *	wraparound
	)

static

Definition at line 2920 of file autovacuum.c.

{
    PgStat_StatTabEntry *tabentry;
 
    /* fetch the pgstat table entry */
    tabentry = pgstat_fetch_stat_tabentry_ext(classForm->relisshared,
                                              relid);
 
    relation_needs_vacanalyze(relid, avopts, classForm, tabentry,
                              effective_multixact_freeze_max_age,
                              dovacuum, doanalyze, wraparound);
 
    /* Release tabentry to avoid leakage */
    if (tabentry)
        pfree(tabentry);
 
    /* ignore ANALYZE for toast tables */
    if (classForm->relkind == RELKIND_TOASTVALUE)
        *doanalyze = false;
}

References pfree(), pgstat_fetch_stat_tabentry_ext(), and relation_needs_vacanalyze().

Referenced by table_recheck_autovac().

◆ relation_needs_vacanalyze()

static void relation_needs_vacanalyze	(	Oid	relid,
		AutoVacOpts *	relopts,
		Form_pg_class	classForm,
		PgStat_StatTabEntry *	tabentry,
		int	effective_multixact_freeze_max_age,
		bool *	dovacuum,
		bool *	doanalyze,
		bool *	wraparound
	)

static

Definition at line 2987 of file autovacuum.c.

{
    bool        force_vacuum;
    bool        av_enabled;
 
    /* constants from reloptions or GUC variables */
    int         vac_base_thresh,
                vac_max_thresh,
                vac_ins_base_thresh,
                anl_base_thresh;
    float4      vac_scale_factor,
                vac_ins_scale_factor,
                anl_scale_factor;
 
    /* thresholds calculated from above constants */
    float4      vacthresh,
                vacinsthresh,
                anlthresh;
 
    /* number of vacuum (resp. analyze) tuples at this time */
    float4      vactuples,
                instuples,
                anltuples;
 
    /* freeze parameters */
    int         freeze_max_age;
    int         multixact_freeze_max_age;
    TransactionId xidForceLimit;
    TransactionId relfrozenxid;
    MultiXactId multiForceLimit;
 
    Assert(classForm != NULL);
    Assert(OidIsValid(relid));
 
    /*
     * Determine vacuum/analyze equation parameters.  We have two possible
     * sources: the passed reloptions (which could be a main table or a toast
     * table), or the autovacuum GUC variables.
     */
 
    /* -1 in autovac setting means use plain vacuum_scale_factor */
    vac_scale_factor = (relopts && relopts->vacuum_scale_factor >= 0)
        ? relopts->vacuum_scale_factor
        : autovacuum_vac_scale;
 
    vac_base_thresh = (relopts && relopts->vacuum_threshold >= 0)
        ? relopts->vacuum_threshold
        : autovacuum_vac_thresh;
 
    /* -1 is used to disable max threshold */
    vac_max_thresh = (relopts && relopts->vacuum_max_threshold >= -1)
        ? relopts->vacuum_max_threshold
        : autovacuum_vac_max_thresh;
 
    vac_ins_scale_factor = (relopts && relopts->vacuum_ins_scale_factor >= 0)
        ? relopts->vacuum_ins_scale_factor
        : autovacuum_vac_ins_scale;
 
    /* -1 is used to disable insert vacuums */
    vac_ins_base_thresh = (relopts && relopts->vacuum_ins_threshold >= -1)
        ? relopts->vacuum_ins_threshold
        : autovacuum_vac_ins_thresh;
 
    anl_scale_factor = (relopts && relopts->analyze_scale_factor >= 0)
        ? relopts->analyze_scale_factor
        : autovacuum_anl_scale;
 
    anl_base_thresh = (relopts && relopts->analyze_threshold >= 0)
        ? relopts->analyze_threshold
        : autovacuum_anl_thresh;
 
    freeze_max_age = (relopts && relopts->freeze_max_age >= 0)
        ? Min(relopts->freeze_max_age, autovacuum_freeze_max_age)
        : autovacuum_freeze_max_age;
 
    multixact_freeze_max_age = (relopts && relopts->multixact_freeze_max_age >= 0)
        ? Min(relopts->multixact_freeze_max_age, effective_multixact_freeze_max_age)
        : effective_multixact_freeze_max_age;
 
    av_enabled = (relopts ? relopts->enabled : true);
 
    /* Force vacuum if table is at risk of wraparound */
    xidForceLimit = recentXid - freeze_max_age;
    if (xidForceLimit < FirstNormalTransactionId)
        xidForceLimit -= FirstNormalTransactionId;
    relfrozenxid = classForm->relfrozenxid;
    force_vacuum = (TransactionIdIsNormal(relfrozenxid) &&
                    TransactionIdPrecedes(relfrozenxid, xidForceLimit));
    if (!force_vacuum)
    {
        MultiXactId relminmxid = classForm->relminmxid;
 
        multiForceLimit = recentMulti - multixact_freeze_max_age;
        if (multiForceLimit < FirstMultiXactId)
            multiForceLimit -= FirstMultiXactId;
        force_vacuum = MultiXactIdIsValid(relminmxid) &&
            MultiXactIdPrecedes(relminmxid, multiForceLimit);
    }
    *wraparound = force_vacuum;
 
    /* User disabled it in pg_class.reloptions?  (But ignore if at risk) */
    if (!av_enabled && !force_vacuum)
    {
        *doanalyze = false;
        *dovacuum = false;
        return;
    }
 
    /*
     * If we found stats for the table, and autovacuum is currently enabled,
     * make a threshold-based decision whether to vacuum and/or analyze.  If
     * autovacuum is currently disabled, we must be here for anti-wraparound
     * vacuuming only, so don't vacuum (or analyze) anything that's not being
     * forced.
     */
    if (tabentry && AutoVacuumingActive())
    {
        float4      pcnt_unfrozen = 1;
        float4      reltuples = classForm->reltuples;
        int32       relpages = classForm->relpages;
        int32       relallfrozen = classForm->relallfrozen;
 
        vactuples = tabentry->dead_tuples;
        instuples = tabentry->ins_since_vacuum;
        anltuples = tabentry->mod_since_analyze;
 
        /* If the table hasn't yet been vacuumed, take reltuples as zero */
        if (reltuples < 0)
            reltuples = 0;
 
        /*
         * If we have data for relallfrozen, calculate the unfrozen percentage
         * of the table to modify insert scale factor. This helps us decide
         * whether or not to vacuum an insert-heavy table based on the number
         * of inserts to the more "active" part of the table.
         */
        if (relpages > 0 && relallfrozen > 0)
        {
            /*
             * It could be the stats were updated manually and relallfrozen >
             * relpages. Clamp relallfrozen to relpages to avoid nonsensical
             * calculations.
             */
            relallfrozen = Min(relallfrozen, relpages);
            pcnt_unfrozen = 1 - ((float4) relallfrozen / relpages);
        }
 
        vacthresh = (float4) vac_base_thresh + vac_scale_factor * reltuples;
        if (vac_max_thresh >= 0 && vacthresh > (float4) vac_max_thresh)
            vacthresh = (float4) vac_max_thresh;
 
        vacinsthresh = (float4) vac_ins_base_thresh +
            vac_ins_scale_factor * reltuples * pcnt_unfrozen;
        anlthresh = (float4) anl_base_thresh + anl_scale_factor * reltuples;
 
        /*
         * Note that we don't need to take special consideration for stat
         * reset, because if that happens, the last vacuum and analyze counts
         * will be reset too.
         */
        if (vac_ins_base_thresh >= 0)
            elog(DEBUG3, "%s: vac: %.0f (threshold %.0f), ins: %.0f (threshold %.0f), anl: %.0f (threshold %.0f)",
                 NameStr(classForm->relname),
                 vactuples, vacthresh, instuples, vacinsthresh, anltuples, anlthresh);
        else
            elog(DEBUG3, "%s: vac: %.0f (threshold %.0f), ins: (disabled), anl: %.0f (threshold %.0f)",
                 NameStr(classForm->relname),
                 vactuples, vacthresh, anltuples, anlthresh);
 
        /* Determine if this table needs vacuum or analyze. */
        *dovacuum = force_vacuum || (vactuples > vacthresh) ||
            (vac_ins_base_thresh >= 0 && instuples > vacinsthresh);
        *doanalyze = (anltuples > anlthresh);
    }
    else
    {
        /*
         * Skip a table not found in stat hash, unless we have to force vacuum
         * for anti-wrap purposes.  If it's not acted upon, there's no need to
         * vacuum it.
         */
        *dovacuum = force_vacuum;
        *doanalyze = false;
    }
 
    /* ANALYZE refuses to work with pg_statistic */
    if (relid == StatisticRelationId)
        *doanalyze = false;
}

References AutoVacOpts::analyze_scale_factor, AutoVacOpts::analyze_threshold, Assert(), autovacuum_anl_scale, autovacuum_anl_thresh, autovacuum_freeze_max_age, autovacuum_vac_ins_scale, autovacuum_vac_ins_thresh, autovacuum_vac_max_thresh, autovacuum_vac_scale, autovacuum_vac_thresh, AutoVacuumingActive(), PgStat_StatTabEntry::dead_tuples, DEBUG3, elog, AutoVacOpts::enabled, FirstMultiXactId, FirstNormalTransactionId, AutoVacOpts::freeze_max_age, PgStat_StatTabEntry::ins_since_vacuum, Min, PgStat_StatTabEntry::mod_since_analyze, AutoVacOpts::multixact_freeze_max_age, MultiXactIdIsValid, MultiXactIdPrecedes(), NameStr, OidIsValid, recentMulti, recentXid, TransactionIdIsNormal, TransactionIdPrecedes(), AutoVacOpts::vacuum_ins_scale_factor, AutoVacOpts::vacuum_ins_threshold, AutoVacOpts::vacuum_max_threshold, AutoVacOpts::vacuum_scale_factor, and AutoVacOpts::vacuum_threshold.

Referenced by do_autovacuum(), and recheck_relation_needs_vacanalyze().

◆ table_recheck_autovac()

static autovac_table * table_recheck_autovac	(	Oid	relid,
		HTAB *	table_toast_map,
		TupleDesc	pg_class_desc,
		int	effective_multixact_freeze_max_age
	)

static

Definition at line 2769 of file autovacuum.c.

{
    Form_pg_class classForm;
    HeapTuple   classTup;
    bool        dovacuum;
    bool        doanalyze;
    autovac_table *tab = NULL;
    bool        wraparound;
    AutoVacOpts *avopts;
    bool        free_avopts = false;
 
    /* fetch the relation's relcache entry */
    classTup = SearchSysCacheCopy1(RELOID, ObjectIdGetDatum(relid));
    if (!HeapTupleIsValid(classTup))
        return NULL;
    classForm = (Form_pg_class) GETSTRUCT(classTup);
 
    /*
     * Get the applicable reloptions.  If it is a TOAST table, try to get the
     * main table reloptions if the toast table itself doesn't have.
     */
    avopts = extract_autovac_opts(classTup, pg_class_desc);
    if (avopts)
        free_avopts = true;
    else if (classForm->relkind == RELKIND_TOASTVALUE &&
             table_toast_map != NULL)
    {
        av_relation *hentry;
        bool        found;
 
        hentry = hash_search(table_toast_map, &relid, HASH_FIND, &found);
        if (found && hentry->ar_hasrelopts)
            avopts = &hentry->ar_reloptions;
    }
 
    recheck_relation_needs_vacanalyze(relid, avopts, classForm,
                                      effective_multixact_freeze_max_age,
                                      &dovacuum, &doanalyze, &wraparound);
 
    /* OK, it needs something done */
    if (doanalyze || dovacuum)
    {
        int         freeze_min_age;
        int         freeze_table_age;
        int         multixact_freeze_min_age;
        int         multixact_freeze_table_age;
        int         log_min_duration;
 
        /*
         * Calculate the vacuum cost parameters and the freeze ages.  If there
         * are options set in pg_class.reloptions, use them; in the case of a
         * toast table, try the main table too.  Otherwise use the GUC
         * defaults, autovacuum's own first and plain vacuum second.
         */
 
        /* -1 in autovac setting means use log_autovacuum_min_duration */
        log_min_duration = (avopts && avopts->log_min_duration >= 0)
            ? avopts->log_min_duration
            : Log_autovacuum_min_duration;
 
        /* these do not have autovacuum-specific settings */
        freeze_min_age = (avopts && avopts->freeze_min_age >= 0)
            ? avopts->freeze_min_age
            : default_freeze_min_age;
 
        freeze_table_age = (avopts && avopts->freeze_table_age >= 0)
            ? avopts->freeze_table_age
            : default_freeze_table_age;
 
        multixact_freeze_min_age = (avopts &&
                                    avopts->multixact_freeze_min_age >= 0)
            ? avopts->multixact_freeze_min_age
            : default_multixact_freeze_min_age;
 
        multixact_freeze_table_age = (avopts &&
                                      avopts->multixact_freeze_table_age >= 0)
            ? avopts->multixact_freeze_table_age
            : default_multixact_freeze_table_age;
 
        tab = palloc(sizeof(autovac_table));
        tab->at_relid = relid;
        tab->at_sharedrel = classForm->relisshared;
 
        /*
         * Select VACUUM options.  Note we don't say VACOPT_PROCESS_TOAST, so
         * that vacuum() skips toast relations.  Also note we tell vacuum() to
         * skip vac_update_datfrozenxid(); we'll do that separately.
         */
        tab->at_params.options =
            (dovacuum ? (VACOPT_VACUUM |
                         VACOPT_PROCESS_MAIN |
                         VACOPT_SKIP_DATABASE_STATS) : 0) |
            (doanalyze ? VACOPT_ANALYZE : 0) |
            (!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
        /*
         * index_cleanup and truncate are unspecified at first in autovacuum.
         * They will be filled in with usable values using their reloptions
         * (or reloption defaults) later.
         */
        tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
        tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
        /* As of now, we don't support parallel vacuum for autovacuum */
        tab->at_params.nworkers = -1;
        tab->at_params.freeze_min_age = freeze_min_age;
        tab->at_params.freeze_table_age = freeze_table_age;
        tab->at_params.multixact_freeze_min_age = multixact_freeze_min_age;
        tab->at_params.multixact_freeze_table_age = multixact_freeze_table_age;
        tab->at_params.is_wraparound = wraparound;
        tab->at_params.log_min_duration = log_min_duration;
        tab->at_params.toast_parent = InvalidOid;
 
        /*
         * Later, in vacuum_rel(), we check reloptions for any
         * vacuum_max_eager_freeze_failure_rate override.
         */
        tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
        tab->at_storage_param_vac_cost_limit = avopts ?
            avopts->vacuum_cost_limit : 0;
        tab->at_storage_param_vac_cost_delay = avopts ?
            avopts->vacuum_cost_delay : -1;
        tab->at_relname = NULL;
        tab->at_nspname = NULL;
        tab->at_datname = NULL;
 
        /*
         * If any of the cost delay parameters has been set individually for
         * this table, disable the balancing algorithm.
         */
        tab->at_dobalance =
            !(avopts && (avopts->vacuum_cost_limit > 0 ||
                         avopts->vacuum_cost_delay >= 0));
    }
 
    if (free_avopts)
        pfree(avopts);
    heap_freetuple(classTup);
    return tab;
}

References av_relation::ar_hasrelopts, av_relation::ar_reloptions, autovac_table::at_datname, autovac_table::at_dobalance, autovac_table::at_nspname, autovac_table::at_params, autovac_table::at_relid, autovac_table::at_relname, autovac_table::at_sharedrel, autovac_table::at_storage_param_vac_cost_delay, autovac_table::at_storage_param_vac_cost_limit, default_freeze_min_age, default_freeze_table_age, default_multixact_freeze_min_age, default_multixact_freeze_table_age, extract_autovac_opts(), VacuumParams::freeze_min_age, AutoVacOpts::freeze_min_age, VacuumParams::freeze_table_age, AutoVacOpts::freeze_table_age, GETSTRUCT(), HASH_FIND, hash_search(), heap_freetuple(), HeapTupleIsValid, VacuumParams::index_cleanup, InvalidOid, VacuumParams::is_wraparound, Log_autovacuum_min_duration, VacuumParams::log_min_duration, AutoVacOpts::log_min_duration, VacuumParams::max_eager_freeze_failure_rate, VacuumParams::multixact_freeze_min_age, AutoVacOpts::multixact_freeze_min_age, VacuumParams::multixact_freeze_table_age, AutoVacOpts::multixact_freeze_table_age, VacuumParams::nworkers, ObjectIdGetDatum(), VacuumParams::options, palloc(), pfree(), recheck_relation_needs_vacanalyze(), SearchSysCacheCopy1, VacuumParams::toast_parent, VacuumParams::truncate, VACOPT_ANALYZE, VACOPT_PROCESS_MAIN, VACOPT_SKIP_DATABASE_STATS, VACOPT_SKIP_LOCKED, VACOPT_VACUUM, VACOPTVALUE_UNSPECIFIED, AutoVacOpts::vacuum_cost_delay, AutoVacOpts::vacuum_cost_limit, and vacuum_max_eager_freeze_failure_rate.

Referenced by do_autovacuum().

◆ VacuumUpdateCosts()

void VacuumUpdateCosts ( void )

Definition at line 1667 of file autovacuum.c.

{
    if (MyWorkerInfo)
    {
        if (av_storage_param_cost_delay >= 0)
            vacuum_cost_delay = av_storage_param_cost_delay;
        else if (autovacuum_vac_cost_delay >= 0)
            vacuum_cost_delay = autovacuum_vac_cost_delay;
        else
            /* fall back to VacuumCostDelay */
            vacuum_cost_delay = VacuumCostDelay;
 
        AutoVacuumUpdateCostLimit();
    }
    else
    {
        /* Must be explicit VACUUM or ANALYZE */
        vacuum_cost_delay = VacuumCostDelay;
        vacuum_cost_limit = VacuumCostLimit;
    }
 
    /*
     * If configuration changes are allowed to impact VacuumCostActive, make
     * sure it is updated.
     */
    if (VacuumFailsafeActive)
        Assert(!VacuumCostActive);
    else if (vacuum_cost_delay > 0)
        VacuumCostActive = true;
    else
    {
        VacuumCostActive = false;
        VacuumCostBalance = 0;
    }
 
    /*
     * Since the cost logging requires a lock, avoid rendering the log message
     * in case we are using a message level where the log wouldn't be emitted.
     */
    if (MyWorkerInfo && message_level_is_interesting(DEBUG2))
    {
        Oid         dboid,
                    tableoid;
 
        Assert(!LWLockHeldByMe(AutovacuumLock));
 
        LWLockAcquire(AutovacuumLock, LW_SHARED);
        dboid = MyWorkerInfo->wi_dboid;
        tableoid = MyWorkerInfo->wi_tableoid;
        LWLockRelease(AutovacuumLock);
 
        elog(DEBUG2,
             "Autovacuum VacuumUpdateCosts(db=%u, rel=%u, dobalance=%s, cost_limit=%d, cost_delay=%g active=%s failsafe=%s)",
             dboid, tableoid, pg_atomic_unlocked_test_flag(&MyWorkerInfo->wi_dobalance) ? "no" : "yes",
             vacuum_cost_limit, vacuum_cost_delay,
             vacuum_cost_delay > 0 ? "yes" : "no",
             VacuumFailsafeActive ? "yes" : "no");
    }
}