common.c

Go to the documentation of this file.

/*
 * psql - the PostgreSQL interactive terminal
 *
 * Copyright (c) 2000-2025, PostgreSQL Global Development Group
 *
 * src/bin/psql/common.c
 */
#include "postgres_fe.h"
 
#include <ctype.h>
#include <limits.h>
#include <math.h>
#include <pwd.h>
#include <signal.h>
#ifndef WIN32
#include <unistd.h>             /* for write() */
#else
#include <io.h>                 /* for _write() */
#include <win32.h>
#endif
 
#include "command.h"
#include "common.h"
#include "common/logging.h"
#include "copy.h"
#include "crosstabview.h"
#include "fe_utils/cancel.h"
#include "fe_utils/mbprint.h"
#include "fe_utils/string_utils.h"
#include "portability/instr_time.h"
#include "settings.h"
 
static bool DescribeQuery(const char *query, double *elapsed_msec);
static int  ExecQueryAndProcessResults(const char *query,
                                       double *elapsed_msec,
                                       bool *svpt_gone_p,
                                       bool is_watch,
                                       int min_rows,
                                       const printQueryOpt *opt,
                                       FILE *printQueryFout);
static bool command_no_begin(const char *query);
 
 
/*
 * openQueryOutputFile --- attempt to open a query output file
 *
 * fname == NULL selects stdout, else an initial '|' selects a pipe,
 * else plain file.
 *
 * Returns output file pointer into *fout, and is-a-pipe flag into *is_pipe.
 * Caller is responsible for adjusting SIGPIPE state if it's a pipe.
 *
 * On error, reports suitable error message and returns false.
 */
bool
openQueryOutputFile(const char *fname, FILE **fout, bool *is_pipe)
{
    if (!fname || fname[0] == '\0')
    {
        *fout = stdout;
        *is_pipe = false;
    }
    else if (*fname == '|')
    {
        fflush(NULL);
        *fout = popen(fname + 1, "w");
        *is_pipe = true;
    }
    else
    {
        *fout = fopen(fname, "w");
        *is_pipe = false;
    }
 
    if (*fout == NULL)
    {
        pg_log_error("%s: %m", fname);
        return false;
    }
 
    return true;
}
 
/*
 * Check if an output stream for \g needs to be opened, and if yes,
 * open it and update the caller's gfile_fout and is_pipe state variables.
 * Return true if OK, false if an error occurred.
 */
static bool
SetupGOutput(FILE **gfile_fout, bool *is_pipe)
{
    /* If there is a \g file or program, and it's not already open, open it */
    if (pset.gfname != NULL && *gfile_fout == NULL)
    {
        if (openQueryOutputFile(pset.gfname, gfile_fout, is_pipe))
        {
            if (*is_pipe)
                disable_sigpipe_trap();
        }
        else
            return false;
    }
    return true;
}
 
/*
 * Close the output stream for \g, if we opened it.
 */
static void
CloseGOutput(FILE *gfile_fout, bool is_pipe)
{
    if (gfile_fout)
    {
        if (is_pipe)
        {
            SetShellResultVariables(pclose(gfile_fout));
            restore_sigpipe_trap();
        }
        else
            fclose(gfile_fout);
    }
}
 
/*
 * Reset pset pipeline state
 */
static void
pipelineReset(void)
{
    pset.piped_syncs = 0;
    pset.piped_commands = 0;
    pset.available_results = 0;
    pset.requested_results = 0;
}
 
/*
 * setQFout
 * -- handler for -o command line option and \o command
 *
 * On success, updates pset with the new output file and returns true.
 * On failure, returns false without changing pset state.
 */
bool
setQFout(const char *fname)
{
    FILE       *fout;
    bool        is_pipe;
 
    /* First make sure we can open the new output file/pipe */
    if (!openQueryOutputFile(fname, &fout, &is_pipe))
        return false;
 
    /* Close old file/pipe */
    if (pset.queryFout && pset.queryFout != stdout && pset.queryFout != stderr)
    {
        if (pset.queryFoutPipe)
            SetShellResultVariables(pclose(pset.queryFout));
        else
            fclose(pset.queryFout);
    }
 
    pset.queryFout = fout;
    pset.queryFoutPipe = is_pipe;
 
    /* Adjust SIGPIPE handling appropriately: ignore signal if is_pipe */
    set_sigpipe_trap_state(is_pipe);
    restore_sigpipe_trap();
 
    return true;
}
 
 
/*
 * Variable-fetching callback for flex lexer
 *
 * If the specified variable exists, return its value as a string (malloc'd
 * and expected to be freed by the caller); else return NULL.
 *
 * If "quote" isn't PQUOTE_PLAIN, then return the value suitably quoted and
 * escaped for the specified quoting requirement.  (Failure in escaping
 * should lead to printing an error and returning NULL.)
 *
 * "passthrough" is the pointer previously given to psql_scan_set_passthrough.
 * In psql, passthrough points to a ConditionalStack, which we check to
 * determine whether variable expansion is allowed.
 */
char *
psql_get_variable(const char *varname, PsqlScanQuoteType quote,
                  void *passthrough)
{
    char       *result = NULL;
    const char *value;
 
    /* In an inactive \if branch, suppress all variable substitutions */
    if (passthrough && !conditional_active((ConditionalStack) passthrough))
        return NULL;
 
    value = GetVariable(pset.vars, varname);
    if (!value)
        return NULL;
 
    switch (quote)
    {
        case PQUOTE_PLAIN:
            result = pg_strdup(value);
            break;
        case PQUOTE_SQL_LITERAL:
        case PQUOTE_SQL_IDENT:
            {
                /*
                 * For these cases, we use libpq's quoting functions, which
                 * assume the string is in the connection's client encoding.
                 */
                char       *escaped_value;
 
                if (!pset.db)
                {
                    pg_log_error("cannot escape without active connection");
                    return NULL;
                }
 
                if (quote == PQUOTE_SQL_LITERAL)
                    escaped_value =
                        PQescapeLiteral(pset.db, value, strlen(value));
                else
                    escaped_value =
                        PQescapeIdentifier(pset.db, value, strlen(value));
 
                if (escaped_value == NULL)
                {
                    const char *error = PQerrorMessage(pset.db);
 
                    pg_log_info("%s", error);
                    return NULL;
                }
 
                /*
                 * Rather than complicate the lexer's API with a notion of
                 * which free() routine to use, just pay the price of an extra
                 * strdup().
                 */
                result = pg_strdup(escaped_value);
                PQfreemem(escaped_value);
                break;
            }
        case PQUOTE_SHELL_ARG:
            {
                /*
                 * For this we use appendShellStringNoError, which is
                 * encoding-agnostic, which is fine since the shell probably
                 * is too.  In any case, the only special character is "'",
                 * which is not known to appear in valid multibyte characters.
                 */
                PQExpBufferData buf;
 
                initPQExpBuffer(&buf);
                if (!appendShellStringNoError(&buf, value))
                {
                    pg_log_error("shell command argument contains a newline or carriage return: \"%s\"",
                                 value);
                    free(buf.data);
                    return NULL;
                }
                result = buf.data;
                break;
            }
 
            /* No default: we want a compiler warning for missing cases */
    }
 
    return result;
}
 
 
/*
 * for backend Notice messages (INFO, WARNING, etc)
 */
void
NoticeProcessor(void *arg, const char *message)
{
    (void) arg;                 /* not used */
    pg_log_info("%s", message);
}
 
 
 
/*
 * Code to support query cancellation
 *
 * Before we start a query, we enable the SIGINT signal catcher to send a
 * cancel request to the backend.
 *
 * SIGINT is supposed to abort all long-running psql operations, not only
 * database queries.  In most places, this is accomplished by checking
 * cancel_pressed during long-running loops.  However, that won't work when
 * blocked on user input (in readline() or fgets()).  In those places, we
 * set sigint_interrupt_enabled true while blocked, instructing the signal
 * catcher to longjmp through sigint_interrupt_jmp.  We assume readline and
 * fgets are coded to handle possible interruption.
 *
 * On Windows, currently this does not work, so control-C is less useful
 * there.
 */
volatile sig_atomic_t sigint_interrupt_enabled = false;
 
sigjmp_buf  sigint_interrupt_jmp;
 
static void
psql_cancel_callback(void)
{
#ifndef WIN32
    /* if we are waiting for input, longjmp out of it */
    if (sigint_interrupt_enabled)
    {
        sigint_interrupt_enabled = false;
        siglongjmp(sigint_interrupt_jmp, 1);
    }
#endif
 
    /* else, set cancel flag to stop any long-running loops */
    cancel_pressed = true;
}
 
void
psql_setup_cancel_handler(void)
{
    setup_cancel_handler(psql_cancel_callback);
}
 
 
/* ConnectionUp
 *
 * Returns whether our backend connection is still there.
 */
static bool
ConnectionUp(void)
{
    return PQstatus(pset.db) != CONNECTION_BAD;
}
 
 
 
/* CheckConnection
 *
 * Verify that we still have a good connection to the backend, and if not,
 * see if it can be restored.
 *
 * Returns true if either the connection was still there, or it could be
 * restored successfully; false otherwise.  If, however, there was no
 * connection and the session is non-interactive, this will exit the program
 * with a code of EXIT_BADCONN.
 */
static bool
CheckConnection(void)
{
    bool        OK;
 
    OK = ConnectionUp();
    if (!OK)
    {
        if (!pset.cur_cmd_interactive)
        {
            pg_log_error("connection to server was lost");
            exit(EXIT_BADCONN);
        }
 
        fprintf(stderr, _("The connection to the server was lost. Attempting reset: "));
        PQreset(pset.db);
        pipelineReset();
        OK = ConnectionUp();
        if (!OK)
        {
            fprintf(stderr, _("Failed.\n"));
 
            /*
             * Transition to having no connection; but stash away the failed
             * connection so that we can still refer to its parameters in a
             * later \connect attempt.  Keep the state cleanup here in sync
             * with do_connect().
             */
            if (pset.dead_conn)
                PQfinish(pset.dead_conn);
            pset.dead_conn = pset.db;
            pset.db = NULL;
            ResetCancelConn();
            UnsyncVariables();
        }
        else
        {
            fprintf(stderr, _("Succeeded.\n"));
 
            /*
             * Re-sync, just in case anything changed.  Keep this in sync with
             * do_connect().
             */
            SyncVariables();
            connection_warnings(false); /* Must be after SyncVariables */
        }
    }
 
    return OK;
}
 
 
 
 
/*
 * AcceptResult
 *
 * Checks whether a result is valid, giving an error message if necessary;
 * and ensures that the connection to the backend is still up.
 *
 * Returns true for valid result, false for error state.
 */
static bool
AcceptResult(const PGresult *result, bool show_error)
{
    bool        OK;
 
    if (!result)
        OK = false;
    else
        switch (PQresultStatus(result))
        {
            case PGRES_COMMAND_OK:
            case PGRES_TUPLES_OK:
            case PGRES_TUPLES_CHUNK:
            case PGRES_EMPTY_QUERY:
            case PGRES_COPY_IN:
            case PGRES_COPY_OUT:
            case PGRES_PIPELINE_SYNC:
                /* Fine, do nothing */
                OK = true;
                break;
 
            case PGRES_PIPELINE_ABORTED:
            case PGRES_BAD_RESPONSE:
            case PGRES_NONFATAL_ERROR:
            case PGRES_FATAL_ERROR:
                OK = false;
                break;
 
            default:
                OK = false;
                pg_log_error("unexpected PQresultStatus: %d",
                             PQresultStatus(result));
                break;
        }
 
    if (!OK && show_error)
    {
        const char *error = PQerrorMessage(pset.db);
 
        if (strlen(error))
            pg_log_info("%s", error);
 
        CheckConnection();
    }
 
    return OK;
}
 
 
/*
 * Set special variables from a query result
 * - ERROR: true/false, whether an error occurred on this query
 * - SQLSTATE: code of error, or "00000" if no error, or "" if unknown
 * - ROW_COUNT: how many rows were returned or affected, or "0"
 * - LAST_ERROR_SQLSTATE: same for last error
 * - LAST_ERROR_MESSAGE: message of last error
 *
 * Note: current policy is to apply this only to the results of queries
 * entered by the user, not queries generated by slash commands.
 */
static void
SetResultVariables(PGresult *result, bool success)
{
    if (success)
    {
        const char *ntuples = PQcmdTuples(result);
 
        SetVariable(pset.vars, "ERROR", "false");
        SetVariable(pset.vars, "SQLSTATE", "00000");
        SetVariable(pset.vars, "ROW_COUNT", *ntuples ? ntuples : "0");
    }
    else
    {
        const char *code = PQresultErrorField(result, PG_DIAG_SQLSTATE);
        const char *mesg = PQresultErrorField(result, PG_DIAG_MESSAGE_PRIMARY);
 
        SetVariable(pset.vars, "ERROR", "true");
 
        /*
         * If there is no SQLSTATE code, use an empty string.  This can happen
         * for libpq-detected errors (e.g., lost connection, ENOMEM).
         */
        if (code == NULL)
            code = "";
        SetVariable(pset.vars, "SQLSTATE", code);
        SetVariable(pset.vars, "ROW_COUNT", "0");
        SetVariable(pset.vars, "LAST_ERROR_SQLSTATE", code);
        SetVariable(pset.vars, "LAST_ERROR_MESSAGE", mesg ? mesg : "");
    }
}
 
 
/*
 * Set special variables from a shell command result
 * - SHELL_ERROR: true/false, whether command returned exit code 0
 * - SHELL_EXIT_CODE: exit code according to shell conventions
 *
 * The argument is a wait status as returned by wait(2) or waitpid(2),
 * which also applies to pclose(3) and system(3).
 */
void
SetShellResultVariables(int wait_result)
{
    char        buf[32];
 
    SetVariable(pset.vars, "SHELL_ERROR",
                (wait_result == 0) ? "false" : "true");
    snprintf(buf, sizeof(buf), "%d", wait_result_to_exit_code(wait_result));
    SetVariable(pset.vars, "SHELL_EXIT_CODE", buf);
}
 
 
/*
 * Set special pipeline variables
 * - PIPELINE_SYNC_COUNT: The number of piped syncs
 * - PIPELINE_COMMAND_COUNT: The number of piped commands
 * - PIPELINE_RESULT_COUNT: The number of results available to read
 */
static void
SetPipelineVariables(void)
{
    char        buf[32];
 
    snprintf(buf, sizeof(buf), "%d", pset.piped_syncs);
    SetVariable(pset.vars, "PIPELINE_SYNC_COUNT", buf);
    snprintf(buf, sizeof(buf), "%d", pset.piped_commands);
    SetVariable(pset.vars, "PIPELINE_COMMAND_COUNT", buf);
    snprintf(buf, sizeof(buf), "%d", pset.available_results);
    SetVariable(pset.vars, "PIPELINE_RESULT_COUNT", buf);
}
 
 
/*
 * ClearOrSaveResult
 *
 * If the result represents an error, remember it for possible display by
 * \errverbose.  Otherwise, just PQclear() it.
 *
 * Note: current policy is to apply this to the results of all queries,
 * including "back door" queries, for debugging's sake.  It's OK to use
 * PQclear() directly on results known to not be error results, however.
 */
static void
ClearOrSaveResult(PGresult *result)
{
    if (result)
    {
        switch (PQresultStatus(result))
        {
            case PGRES_NONFATAL_ERROR:
            case PGRES_FATAL_ERROR:
                PQclear(pset.last_error_result);
                pset.last_error_result = result;
                break;
 
            default:
                PQclear(result);
                break;
        }
    }
}
 
 
/*
 * Consume all results
 */
static void
ClearOrSaveAllResults(void)
{
    PGresult   *result;
 
    while ((result = PQgetResult(pset.db)) != NULL)
        ClearOrSaveResult(result);
}
 
 
/*
 * Print microtiming output.  Always print raw milliseconds; if the interval
 * is >= 1 second, also break it down into days/hours/minutes/seconds.
 */
static void
PrintTiming(double elapsed_msec)
{
    double      seconds;
    double      minutes;
    double      hours;
    double      days;
 
    if (elapsed_msec < 1000.0)
    {
        /* This is the traditional (pre-v10) output format */
        printf(_("Time: %.3f ms\n"), elapsed_msec);
        return;
    }
 
    /*
     * Note: we could print just seconds, in a format like %06.3f, when the
     * total is less than 1min.  But that's hard to interpret unless we tack
     * on "s" or otherwise annotate it.  Forcing the display to include
     * minutes seems like a better solution.
     */
    seconds = elapsed_msec / 1000.0;
    minutes = floor(seconds / 60.0);
    seconds -= 60.0 * minutes;
    if (minutes < 60.0)
    {
        printf(_("Time: %.3f ms (%02d:%06.3f)\n"),
               elapsed_msec, (int) minutes, seconds);
        return;
    }
 
    hours = floor(minutes / 60.0);
    minutes -= 60.0 * hours;
    if (hours < 24.0)
    {
        printf(_("Time: %.3f ms (%02d:%02d:%06.3f)\n"),
               elapsed_msec, (int) hours, (int) minutes, seconds);
        return;
    }
 
    days = floor(hours / 24.0);
    hours -= 24.0 * days;
    printf(_("Time: %.3f ms (%.0f d %02d:%02d:%06.3f)\n"),
           elapsed_msec, days, (int) hours, (int) minutes, seconds);
}
 
 
/*
 * PSQLexec
 *
 * This is the way to send "backdoor" queries (those not directly entered
 * by the user). It is subject to -E but not -e.
 *
 * Caller is responsible for handling the ensuing processing if a COPY
 * command is sent.
 *
 * Note: we don't bother to check PQclientEncoding; it is assumed that no
 * caller uses this path to issue "SET CLIENT_ENCODING".
 */
PGresult *
PSQLexec(const char *query)
{
    PGresult   *res;
 
    if (!pset.db)
    {
        pg_log_error("You are currently not connected to a database.");
        return NULL;
    }
 
    if (pset.echo_hidden != PSQL_ECHO_HIDDEN_OFF)
    {
        printf(_("/******** QUERY *********/\n"
                 "%s\n"
                 "/************************/\n\n"), query);
        fflush(stdout);
        if (pset.logfile)
        {
            fprintf(pset.logfile,
                    _("/******** QUERY *********/\n"
                      "%s\n"
                      "/************************/\n\n"), query);
            fflush(pset.logfile);
        }
 
        if (pset.echo_hidden == PSQL_ECHO_HIDDEN_NOEXEC)
            return NULL;
    }
 
    SetCancelConn(pset.db);
 
    res = PQexec(pset.db, query);
 
    ResetCancelConn();
 
    if (!AcceptResult(res, true))
    {
        ClearOrSaveResult(res);
        res = NULL;
    }
 
    return res;
}
 
 
/*
 * PSQLexecWatch
 *
 * This function is used for \watch command to send the query to
 * the server and print out the result.
 *
 * Returns 1 if the query executed successfully, 0 if it cannot be repeated,
 * e.g., because of the interrupt, -1 on error.
 */
int
PSQLexecWatch(const char *query, const printQueryOpt *opt, FILE *printQueryFout, int min_rows)
{
    bool        timing = pset.timing;
    double      elapsed_msec = 0;
    int         res;
 
    if (!pset.db)
    {
        pg_log_error("You are currently not connected to a database.");
        return 0;
    }
 
    SetCancelConn(pset.db);
 
    res = ExecQueryAndProcessResults(query, &elapsed_msec, NULL, true, min_rows, opt, printQueryFout);
 
    ResetCancelConn();
 
    /* Possible microtiming output */
    if (timing)
        PrintTiming(elapsed_msec);
 
    return res;
}
 
 
/*
 * PrintNotifications: check for asynchronous notifications, and print them out
 */
static void
PrintNotifications(void)
{
    PGnotify   *notify;
 
    PQconsumeInput(pset.db);
    while ((notify = PQnotifies(pset.db)) != NULL)
    {
        /* for backward compatibility, only show payload if nonempty */
        if (notify->extra[0])
            fprintf(pset.queryFout, _("Asynchronous notification \"%s\" with payload \"%s\" received from server process with PID %d.\n"),
                    notify->relname, notify->extra, notify->be_pid);
        else
            fprintf(pset.queryFout, _("Asynchronous notification \"%s\" received from server process with PID %d.\n"),
                    notify->relname, notify->be_pid);
        fflush(pset.queryFout);
        PQfreemem(notify);
        PQconsumeInput(pset.db);
    }
}
 
 
/*
 * PrintQueryTuples: assuming query result is OK, print its tuples
 *
 * We use the options given by opt unless that's NULL, in which case
 * we use pset.popt.
 *
 * Output is to printQueryFout unless that's NULL, in which case
 * we use pset.queryFout.
 *
 * Returns true if successful, false otherwise.
 */
static bool
PrintQueryTuples(const PGresult *result, const printQueryOpt *opt,
                 FILE *printQueryFout)
{
    bool        ok = true;
    FILE       *fout = printQueryFout ? printQueryFout : pset.queryFout;
 
    printQuery(result, opt ? opt : &pset.popt, fout, false, pset.logfile);
    fflush(fout);
    if (ferror(fout))
    {
        pg_log_error("could not print result table: %m");
        ok = false;
    }
 
    return ok;
}
 
 
/*
 * StoreQueryTuple: assuming query result is OK, save data into variables
 *
 * Returns true if successful, false otherwise.
 */
static bool
StoreQueryTuple(const PGresult *result)
{
    bool        success = true;
 
    if (PQntuples(result) < 1)
    {
        pg_log_error("no rows returned for \\gset");
        success = false;
    }
    else if (PQntuples(result) > 1)
    {
        pg_log_error("more than one row returned for \\gset");
        success = false;
    }
    else
    {
        int         i;
 
        for (i = 0; i < PQnfields(result); i++)
        {
            char       *colname = PQfname(result, i);
            char       *varname;
            char       *value;
 
            /* concatenate prefix and column name */
            varname = psprintf("%s%s", pset.gset_prefix, colname);
 
            if (VariableHasHook(pset.vars, varname))
            {
                pg_log_warning("attempt to \\gset into specially treated variable \"%s\" ignored",
                               varname);
                continue;
            }
 
            if (!PQgetisnull(result, 0, i))
                value = PQgetvalue(result, 0, i);
            else
            {
                /* for NULL value, unset rather than set the variable */
                value = NULL;
            }
 
            if (!SetVariable(pset.vars, varname, value))
            {
                free(varname);
                success = false;
                break;
            }
 
            free(varname);
        }
    }
 
    return success;
}
 
 
/*
 * ExecQueryTuples: assuming query result is OK, execute each query
 * result field as a SQL statement
 *
 * Returns true if successful, false otherwise.
 */
static bool
ExecQueryTuples(const PGresult *result)
{
    bool        success = true;
    int         nrows = PQntuples(result);
    int         ncolumns = PQnfields(result);
    int         r,
                c;
 
    /*
     * We must turn off gexec_flag to avoid infinite recursion.
     */
    pset.gexec_flag = false;
 
    for (r = 0; r < nrows; r++)
    {
        for (c = 0; c < ncolumns; c++)
        {
            if (!PQgetisnull(result, r, c))
            {
                const char *query = PQgetvalue(result, r, c);
 
                /* Abandon execution if cancel_pressed */
                if (cancel_pressed)
                    goto loop_exit;
 
                /*
                 * ECHO_ALL mode should echo these queries, but SendQuery
                 * assumes that MainLoop did that, so we have to do it here.
                 */
                if (pset.echo == PSQL_ECHO_ALL && !pset.singlestep)
                {
                    puts(query);
                    fflush(stdout);
                }
 
                if (!SendQuery(query))
                {
                    /* Error - abandon execution if ON_ERROR_STOP */
                    success = false;
                    if (pset.on_error_stop)
                        goto loop_exit;
                }
            }
        }
    }
 
loop_exit:
 
    /*
     * Restore state.  We know gexec_flag was on, else we'd not be here. (We
     * also know it'll get turned off at end of command, but that's not ours
     * to do here.)
     */
    pset.gexec_flag = true;
 
    /* Return true if all queries were successful */
    return success;
}
 
 
/*
 * Marshal the COPY data.  Either path will get the
 * connection out of its COPY state, then call PQresultStatus()
 * once and report any error.  Return whether all was ok.
 *
 * For COPY OUT, direct the output to copystream, or discard if that's NULL.
 * For COPY IN, use pset.copyStream as data source if it's set,
 * otherwise cur_cmd_source.
 *
 * Update *resultp if further processing is necessary; set to NULL otherwise.
 * Return a result when queryFout can safely output a result status: on COPY
 * IN, or on COPY OUT if written to something other than pset.queryFout.
 * Returning NULL prevents the command status from being printed, which we
 * want if the status line doesn't get taken as part of the COPY data.
 */
static bool
HandleCopyResult(PGresult **resultp, FILE *copystream)
{
    bool        success;
    PGresult   *copy_result;
    ExecStatusType result_status = PQresultStatus(*resultp);
 
    Assert(result_status == PGRES_COPY_OUT ||
           result_status == PGRES_COPY_IN);
 
    SetCancelConn(pset.db);
 
    if (result_status == PGRES_COPY_OUT)
    {
        success = handleCopyOut(pset.db,
                                copystream,
                                &copy_result)
            && (copystream != NULL);
 
        /*
         * Suppress status printing if the report would go to the same place
         * as the COPY data just went.  Note this doesn't prevent error
         * reporting, since handleCopyOut did that.
         */
        if (copystream == pset.queryFout)
        {
            PQclear(copy_result);
            copy_result = NULL;
        }
    }
    else
    {
        /* COPY IN */
        /* Ignore the copystream argument passed to the function */
        copystream = pset.copyStream ? pset.copyStream : pset.cur_cmd_source;
        success = handleCopyIn(pset.db,
                               copystream,
                               PQbinaryTuples(*resultp),
                               &copy_result);
    }
    ResetCancelConn();
 
    /*
     * Replace the PGRES_COPY_OUT/IN result with COPY command's exit status,
     * or with NULL if we want to suppress printing anything.
     */
    PQclear(*resultp);
    *resultp = copy_result;
 
    return success;
}
 
/*
 * PrintQueryStatus: report command status as required
 */
static void
PrintQueryStatus(PGresult *result, FILE *printQueryFout)
{
    char        buf[16];
    const char *cmdstatus = PQcmdStatus(result);
    FILE       *fout = printQueryFout ? printQueryFout : pset.queryFout;
 
    /* Do nothing if it's a TUPLES_OK result that isn't from RETURNING */
    if (PQresultStatus(result) == PGRES_TUPLES_OK)
    {
        if (!(strncmp(cmdstatus, "INSERT", 6) == 0 ||
              strncmp(cmdstatus, "UPDATE", 6) == 0 ||
              strncmp(cmdstatus, "DELETE", 6) == 0 ||
              strncmp(cmdstatus, "MERGE", 5) == 0))
            return;
    }
 
    if (!pset.quiet)
    {
        if (pset.popt.topt.format == PRINT_HTML)
        {
            fputs("<p>", fout);
            html_escaped_print(cmdstatus, fout);
            fputs("</p>\n", fout);
        }
        else
            fprintf(fout, "%s\n", cmdstatus);
        fflush(fout);
    }
 
    if (pset.logfile)
        fprintf(pset.logfile, "%s\n", cmdstatus);
 
    snprintf(buf, sizeof(buf), "%u", (unsigned int) PQoidValue(result));
    SetVariable(pset.vars, "LASTOID", buf);
}
 
 
/*
 * PrintQueryResult: print out (or store or execute) query result as required
 *
 * last is true if this is the last result of a command string.
 * opt and printQueryFout are defined as for PrintQueryTuples.
 * printStatusFout is where to send command status; NULL means pset.queryFout.
 *
 * Returns true if the query executed successfully, false otherwise.
 */
static bool
PrintQueryResult(PGresult *result, bool last,
                 const printQueryOpt *opt, FILE *printQueryFout,
                 FILE *printStatusFout)
{
    bool        success;
 
    if (!result)
        return false;
 
    switch (PQresultStatus(result))
    {
        case PGRES_TUPLES_OK:
            /* store or execute or print the data ... */
            if (last && pset.gset_prefix)
                success = StoreQueryTuple(result);
            else if (last && pset.gexec_flag)
                success = ExecQueryTuples(result);
            else if (last && pset.crosstab_flag)
                success = PrintResultInCrosstab(result);
            else if (last || pset.show_all_results)
                success = PrintQueryTuples(result, opt, printQueryFout);
            else
                success = true;
 
            /*
             * If it's INSERT/UPDATE/DELETE/MERGE RETURNING, also print
             * status.
             */
            if (last || pset.show_all_results)
                PrintQueryStatus(result, printStatusFout);
 
            break;
 
        case PGRES_COMMAND_OK:
            if (last || pset.show_all_results)
                PrintQueryStatus(result, printStatusFout);
            success = true;
            break;
 
        case PGRES_EMPTY_QUERY:
            success = true;
            break;
 
        case PGRES_COPY_OUT:
        case PGRES_COPY_IN:
            /* nothing to do here: already processed */
            success = true;
            break;
 
        case PGRES_PIPELINE_ABORTED:
        case PGRES_BAD_RESPONSE:
        case PGRES_NONFATAL_ERROR:
        case PGRES_FATAL_ERROR:
            success = false;
            break;
 
        default:
            success = false;
            pg_log_error("unexpected PQresultStatus: %d",
                         PQresultStatus(result));
            break;
    }
 
    return success;
}
 
/*
 * SendQuery: send the query string to the backend
 * (and print out result)
 *
 * Note: This is the "front door" way to send a query. That is, use it to
 * send queries actually entered by the user. These queries will be subject to
 * single step mode.
 * To send "back door" queries (generated by slash commands, etc.) in a
 * controlled way, use PSQLexec().
 *
 * Returns true if the query executed successfully, false otherwise.
 */
bool
SendQuery(const char *query)
{
    bool        timing = pset.timing;
    PGTransactionStatusType transaction_status;
    double      elapsed_msec = 0;
    bool        OK = false;
    int         i;
    bool        on_error_rollback_savepoint = false;
    bool        svpt_gone = false;
 
    if (!pset.db)
    {
        pg_log_error("You are currently not connected to a database.");
        goto sendquery_cleanup;
    }
 
    if (pset.singlestep)
    {
        char        buf[3];
 
        fflush(stderr);
        printf(_("/**(Single step mode: verify command)******************************************/\n"
                 "%s\n"
                 "/**(press return to proceed or enter x and return to cancel)*******************/\n"),
               query);
        fflush(stdout);
        if (fgets(buf, sizeof(buf), stdin) != NULL)
            if (buf[0] == 'x')
                goto sendquery_cleanup;
        if (cancel_pressed)
            goto sendquery_cleanup;
    }
    else if (pset.echo == PSQL_ECHO_QUERIES)
    {
        puts(query);
        fflush(stdout);
    }
 
    if (pset.logfile)
    {
        fprintf(pset.logfile,
                _("/******** QUERY *********/\n"
                  "%s\n"
                  "/************************/\n\n"), query);
        fflush(pset.logfile);
    }
 
    SetCancelConn(pset.db);
 
    transaction_status = PQtransactionStatus(pset.db);
 
    if (transaction_status == PQTRANS_IDLE &&
        !pset.autocommit &&
        !command_no_begin(query))
    {
        PGresult   *result;
 
        result = PQexec(pset.db, "BEGIN");
        if (PQresultStatus(result) != PGRES_COMMAND_OK)
        {
            pg_log_info("%s", PQerrorMessage(pset.db));
            ClearOrSaveResult(result);
            goto sendquery_cleanup;
        }
        ClearOrSaveResult(result);
        transaction_status = PQtransactionStatus(pset.db);
    }
 
    if (transaction_status == PQTRANS_INTRANS &&
        pset.on_error_rollback != PSQL_ERROR_ROLLBACK_OFF &&
        (pset.cur_cmd_interactive ||
         pset.on_error_rollback == PSQL_ERROR_ROLLBACK_ON))
    {
        PGresult   *result;
 
        result = PQexec(pset.db, "SAVEPOINT pg_psql_temporary_savepoint");
        if (PQresultStatus(result) != PGRES_COMMAND_OK)
        {
            pg_log_info("%s", PQerrorMessage(pset.db));
            ClearOrSaveResult(result);
            goto sendquery_cleanup;
        }
        ClearOrSaveResult(result);
        on_error_rollback_savepoint = true;
    }
 
    if (pset.gdesc_flag)
    {
        /* Describe query's result columns, without executing it */
        OK = DescribeQuery(query, &elapsed_msec);
    }
    else
    {
        /* Default fetch-and-print mode */
        OK = (ExecQueryAndProcessResults(query, &elapsed_msec, &svpt_gone, false, 0, NULL, NULL) > 0);
    }
 
    if (!OK && pset.echo == PSQL_ECHO_ERRORS)
        pg_log_info("STATEMENT:  %s", query);
 
    /* If we made a temporary savepoint, possibly release/rollback */
    if (on_error_rollback_savepoint)
    {
        const char *svptcmd = NULL;
 
        transaction_status = PQtransactionStatus(pset.db);
 
        switch (transaction_status)
        {
            case PQTRANS_INERROR:
                /* We always rollback on an error */
                svptcmd = "ROLLBACK TO pg_psql_temporary_savepoint";
                break;
 
            case PQTRANS_IDLE:
                /* If they are no longer in a transaction, then do nothing */
                break;
 
            case PQTRANS_INTRANS:
 
                /*
                 * Release our savepoint, but do nothing if they are messing
                 * with savepoints themselves
                 */
                if (!svpt_gone)
                    svptcmd = "RELEASE pg_psql_temporary_savepoint";
                break;
 
            case PQTRANS_ACTIVE:
            case PQTRANS_UNKNOWN:
            default:
                OK = false;
                /* PQTRANS_UNKNOWN is expected given a broken connection. */
                if (transaction_status != PQTRANS_UNKNOWN || ConnectionUp())
                    pg_log_error("unexpected transaction status (%d)",
                                 transaction_status);
                break;
        }
 
        if (svptcmd)
        {
            PGresult   *svptres;
 
            svptres = PQexec(pset.db, svptcmd);
            if (PQresultStatus(svptres) != PGRES_COMMAND_OK)
            {
                pg_log_info("%s", PQerrorMessage(pset.db));
                ClearOrSaveResult(svptres);
                OK = false;
 
                goto sendquery_cleanup;
            }
            PQclear(svptres);
        }
    }
 
    /* Possible microtiming output */
    if (timing)
        PrintTiming(elapsed_msec);
 
    /* check for events that may occur during query execution */
 
    if (pset.encoding != PQclientEncoding(pset.db) &&
        PQclientEncoding(pset.db) >= 0)
    {
        /* track effects of SET CLIENT_ENCODING */
        pset.encoding = PQclientEncoding(pset.db);
        pset.popt.topt.encoding = pset.encoding;
        SetVariable(pset.vars, "ENCODING",
                    pg_encoding_to_char(pset.encoding));
    }
 
    PrintNotifications();
 
    /* perform cleanup that should occur after any attempted query */
 
sendquery_cleanup:
 
    /* global cancellation reset */
    ResetCancelConn();
 
    /* reset \g's output-to-filename trigger */
    if (pset.gfname)
    {
        free(pset.gfname);
        pset.gfname = NULL;
    }
 
    /* restore print settings if \g changed them */
    if (pset.gsavepopt)
    {
        restorePsetInfo(&pset.popt, pset.gsavepopt);
        pset.gsavepopt = NULL;
    }
 
    /* clean up after extended protocol queries */
    clean_extended_state();
 
    /* reset \gset trigger */
    if (pset.gset_prefix)
    {
        free(pset.gset_prefix);
        pset.gset_prefix = NULL;
    }
 
    /* reset \gdesc trigger */
    pset.gdesc_flag = false;
 
    /* reset \gexec trigger */
    pset.gexec_flag = false;
 
    /* reset \crosstabview trigger */
    pset.crosstab_flag = false;
    for (i = 0; i < lengthof(pset.ctv_args); i++)
    {
        pg_free(pset.ctv_args[i]);
        pset.ctv_args[i] = NULL;
    }
 
    return OK;
}
 
 
/*
 * DescribeQuery: describe the result columns of a query, without executing it
 *
 * Returns true if the operation executed successfully, false otherwise.
 *
 * If pset.timing is on, total query time (exclusive of result-printing) is
 * stored into *elapsed_msec.
 */
static bool
DescribeQuery(const char *query, double *elapsed_msec)
{
    bool        timing = pset.timing;
    PGresult   *result;
    bool        OK;
    instr_time  before,
                after;
 
    *elapsed_msec = 0;
 
    if (timing)
        INSTR_TIME_SET_CURRENT(before);
    else
        INSTR_TIME_SET_ZERO(before);
 
    /*
     * To parse the query but not execute it, we prepare it, using the unnamed
     * prepared statement.  This is invisible to psql users, since there's no
     * way to access the unnamed prepared statement from psql user space. The
     * next Parse or Query protocol message would overwrite the statement
     * anyway.  (So there's no great need to clear it when done, which is a
     * good thing because libpq provides no easy way to do that.)
     */
    result = PQprepare(pset.db, "", query, 0, NULL);
    if (PQresultStatus(result) != PGRES_COMMAND_OK)
    {
        pg_log_info("%s", PQerrorMessage(pset.db));
        SetResultVariables(result, false);
        ClearOrSaveResult(result);
        return false;
    }
    PQclear(result);
 
    result = PQdescribePrepared(pset.db, "");
    OK = AcceptResult(result, true) &&
        (PQresultStatus(result) == PGRES_COMMAND_OK);
    if (OK && result)
    {
        if (PQnfields(result) > 0)
        {
            PQExpBufferData buf;
            int         i;
 
            initPQExpBuffer(&buf);
 
            printfPQExpBuffer(&buf,
                              "SELECT name AS \"%s\", pg_catalog.format_type(tp, tpm) AS \"%s\"\n"
                              "FROM (VALUES ",
                              gettext_noop("Column"),
                              gettext_noop("Type"));
 
            for (i = 0; i < PQnfields(result); i++)
            {
                const char *name;
                char       *escname;
 
                if (i > 0)
                    appendPQExpBufferChar(&buf, ',');
 
                name = PQfname(result, i);
                escname = PQescapeLiteral(pset.db, name, strlen(name));
 
                if (escname == NULL)
                {
                    pg_log_info("%s", PQerrorMessage(pset.db));
                    PQclear(result);
                    termPQExpBuffer(&buf);
                    return false;
                }
 
                appendPQExpBuffer(&buf, "(%s, '%u'::pg_catalog.oid, %d)",
                                  escname,
                                  PQftype(result, i),
                                  PQfmod(result, i));
 
                PQfreemem(escname);
            }
 
            appendPQExpBufferStr(&buf, ") s(name, tp, tpm)");
            PQclear(result);
 
            result = PQexec(pset.db, buf.data);
            OK = AcceptResult(result, true);
 
            if (timing)
            {
                INSTR_TIME_SET_CURRENT(after);
                INSTR_TIME_SUBTRACT(after, before);
                *elapsed_msec += INSTR_TIME_GET_MILLISEC(after);
            }
 
            if (OK && result)
                OK = PrintQueryResult(result, true, NULL, NULL, NULL);
 
            termPQExpBuffer(&buf);
        }
        else
            fprintf(pset.queryFout,
                    _("The command has no result, or the result has no columns.\n"));
    }
 
    SetResultVariables(result, OK);
    ClearOrSaveResult(result);
 
    return OK;
}
 
/*
 * Read and discard all results in an aborted pipeline.
 *
 * If a synchronisation point is found, we can stop discarding results as
 * the pipeline will switch back to a clean state.  If no synchronisation
 * point is available, we need to stop when there are no more pending
 * results, otherwise, calling PQgetResult() would block.
 */
static PGresult *
discardAbortedPipelineResults(void)
{
    for (;;)
    {
        PGresult   *res = PQgetResult(pset.db);
        ExecStatusType result_status = PQresultStatus(res);
 
        if (result_status == PGRES_PIPELINE_SYNC)
        {
            /*
             * Found a synchronisation point.  The sync counter is decremented
             * by the caller.
             */
            return res;
        }
        else if (res != NULL && result_status == PGRES_FATAL_ERROR)
        {
            /*
             * Found a FATAL error sent by the backend, and we cannot recover
             * from this state.  Instead, return the last result and let the
             * outer loop handle it.
             */
            PGresult   *fatal_res PG_USED_FOR_ASSERTS_ONLY;
 
            /*
             * Fetch result to consume the end of the current query being
             * processed.
             */
            fatal_res = PQgetResult(pset.db);
            Assert(fatal_res == NULL);
            return res;
        }
        else if (res == NULL)
        {
            /* A query was processed, decrement the counters */
            Assert(pset.available_results > 0);
            Assert(pset.requested_results > 0);
            pset.available_results--;
            pset.requested_results--;
        }
 
        if (pset.requested_results == 0)
        {
            /* We have read all the requested results, leave */
            return res;
        }
 
        if (pset.available_results == 0 && pset.piped_syncs == 0)
        {
            /*
             * There are no more results to get and there is no
             * synchronisation point to stop at.  This will leave the pipeline
             * in an aborted state.
             */
            return res;
        }
 
        /*
         * An aborted pipeline will have either NULL results or results in an
         * PGRES_PIPELINE_ABORTED status.
         */
        Assert(res == NULL || result_status == PGRES_PIPELINE_ABORTED);
        PQclear(res);
    }
}
 
/*
 * ExecQueryAndProcessResults: utility function for use by SendQuery()
 * and PSQLexecWatch().
 *
 * Sends query and cycles through PGresult objects.
 *
 * If our command string contained a COPY FROM STDIN or COPY TO STDOUT, the
 * PGresult associated with these commands must be processed by providing an
 * input or output stream.  In that event, we'll marshal data for the COPY.
 *
 * For other commands, the results are processed normally, depending on their
 * status and the status of a pipeline.
 *
 * When invoked from \watch, is_watch is true and min_rows is the value
 * of that option, or 0 if it wasn't set.
 *
 * Returns 1 on complete success, 0 on interrupt and -1 or errors.  Possible
 * failure modes include purely client-side problems; check the transaction
 * status for the server-side opinion.
 *
 * Note that on a combined query, failure does not mean that nothing was
 * committed.
 */
static int
ExecQueryAndProcessResults(const char *query,
                           double *elapsed_msec, bool *svpt_gone_p,
                           bool is_watch, int min_rows,
                           const printQueryOpt *opt, FILE *printQueryFout)
{
    bool        timing = pset.timing;
    bool        success = false;
    bool        return_early = false;
    bool        end_pipeline = false;
    instr_time  before,
                after;
    PGresult   *result;
    FILE       *gfile_fout = NULL;
    bool        gfile_is_pipe = false;
 
    if (timing)
        INSTR_TIME_SET_CURRENT(before);
    else
        INSTR_TIME_SET_ZERO(before);
 
    switch (pset.send_mode)
    {
        case PSQL_SEND_EXTENDED_CLOSE:
            success = PQsendClosePrepared(pset.db, pset.stmtName);
            if (success && PQpipelineStatus(pset.db) != PQ_PIPELINE_OFF)
                pset.piped_commands++;
            break;
        case PSQL_SEND_EXTENDED_PARSE:
            success = PQsendPrepare(pset.db, pset.stmtName, query, 0, NULL);
            if (success && PQpipelineStatus(pset.db) != PQ_PIPELINE_OFF)
                pset.piped_commands++;
            break;
        case PSQL_SEND_EXTENDED_QUERY_PARAMS:
            Assert(pset.stmtName == NULL);
            success = PQsendQueryParams(pset.db, query,
                                        pset.bind_nparams, NULL,
                                        (const char *const *) pset.bind_params,
                                        NULL, NULL, 0);
            if (success && PQpipelineStatus(pset.db) != PQ_PIPELINE_OFF)
                pset.piped_commands++;
            break;
        case PSQL_SEND_EXTENDED_QUERY_PREPARED:
            Assert(pset.stmtName != NULL);
            success = PQsendQueryPrepared(pset.db, pset.stmtName,
                                          pset.bind_nparams,
                                          (const char *const *) pset.bind_params,
                                          NULL, NULL, 0);
            if (success && PQpipelineStatus(pset.db) != PQ_PIPELINE_OFF)
                pset.piped_commands++;
            break;
        case PSQL_SEND_START_PIPELINE_MODE:
            success = PQenterPipelineMode(pset.db);
            break;
        case PSQL_SEND_END_PIPELINE_MODE:
            success = PQpipelineSync(pset.db);
            if (success && PQpipelineStatus(pset.db) != PQ_PIPELINE_OFF)
            {
                /*
                 * End of the pipeline, all queued commands need to be
                 * processed.
                 */
                end_pipeline = true;
                pset.piped_syncs++;
 
                /*
                 * The server will send a ReadyForQuery after a Sync is
                 * processed, flushing all the results back to the client.
                 */
                pset.available_results += pset.piped_commands;
                pset.piped_commands = 0;
 
                /* We want to read all results */
                pset.requested_results = pset.available_results + pset.piped_syncs;
            }
            break;
        case PSQL_SEND_PIPELINE_SYNC:
            success = PQsendPipelineSync(pset.db);
            if (success && PQpipelineStatus(pset.db) != PQ_PIPELINE_OFF)
            {
                pset.piped_syncs++;
 
                /*
                 * The server will send a ReadyForQuery after a Sync is
                 * processed, flushing all the results back to the client.
                 */
                pset.available_results += pset.piped_commands;
                pset.piped_commands = 0;
            }
            break;
        case PSQL_SEND_FLUSH:
            success = PQflush(pset.db);
            break;
        case PSQL_SEND_FLUSH_REQUEST:
            success = PQsendFlushRequest(pset.db);
            if (success && PQpipelineStatus(pset.db) != PQ_PIPELINE_OFF)
            {
                /*
                 * With the flush request, all commands in the pipeline are
                 * pushed and the server will flush the results back to the
                 * client, making them available.
                 */
                pset.available_results += pset.piped_commands;
                pset.piped_commands = 0;
            }
            break;
        case PSQL_SEND_GET_RESULTS:
            if (pset.available_results == 0 && pset.piped_syncs == 0)
            {
                /*
                 * If no sync or flush request were sent, PQgetResult() would
                 * block as there are no results available.  Forbid any
                 * attempt to get pending results should we try to reach this
                 * state.
                 */
                pg_log_info("No pending results to get");
                success = false;
                pset.requested_results = 0;
            }
            else
            {
                success = true;
 
                /*
                 * Cap requested_results to the maximum number of known
                 * results.
                 */
                if (pset.requested_results == 0 ||
                    pset.requested_results > (pset.available_results + pset.piped_syncs))
                    pset.requested_results = pset.available_results + pset.piped_syncs;
            }
            break;
        case PSQL_SEND_QUERY:
            if (PQpipelineStatus(pset.db) != PQ_PIPELINE_OFF)
            {
                success = PQsendQueryParams(pset.db, query,
                                            0, NULL, NULL, NULL, NULL, 0);
                if (success)
                    pset.piped_commands++;
            }
            else
                success = PQsendQuery(pset.db, query);
            break;
    }
 
    if (!success)
    {
        const char *error = PQerrorMessage(pset.db);
 
        if (strlen(error))
            pg_log_info("%s", error);
 
        CheckConnection();
 
        SetPipelineVariables();
 
        return -1;
    }
 
    if (pset.requested_results == 0 && !end_pipeline &&
        PQpipelineStatus(pset.db) != PQ_PIPELINE_OFF)
    {
        /*
         * We are in a pipeline and have not reached the pipeline end, or
         * there was no request to read pipeline results.  Update the psql
         * variables tracking the pipeline activity and exit.
         */
        SetPipelineVariables();
        return 1;
    }
 
    /*
     * Fetch the result in chunks if FETCH_COUNT is set, except when:
     *
     * * SHOW_ALL_RESULTS is false, since that requires us to complete the
     * query before we can tell if its results should be displayed.
     *
     * * We're doing \crosstab, which likewise needs to see all the rows at
     * once.
     *
     * * We're doing \gexec: we must complete the data fetch to make the
     * connection free for issuing the resulting commands.
     *
     * * We're doing \gset: only one result row is allowed anyway.
     *
     * * We're doing \watch: users probably don't want us to force use of the
     * pager for that, plus chunking could break the min_rows check.
     */
    if (pset.fetch_count > 0 && pset.show_all_results &&
        !pset.crosstab_flag && !pset.gexec_flag &&
        !pset.gset_prefix && !is_watch)
    {
        if (!PQsetChunkedRowsMode(pset.db, pset.fetch_count))
            pg_log_warning("fetching results in chunked mode failed");
    }
 
    /*
     * If SIGINT is sent while the query is processing, the interrupt will be
     * consumed.  The user's intention, though, is to cancel the entire watch
     * process, so detect a sent cancellation request and exit in this case.
     */
    if (is_watch && cancel_pressed)
    {
        ClearOrSaveAllResults();
        return 0;
    }
 
    /* first result */
    result = PQgetResult(pset.db);
    if (min_rows > 0 && PQntuples(result) < min_rows)
    {
        return_early = true;
    }
 
    while (result != NULL)
    {
        ExecStatusType result_status;
        bool        is_chunked_result = false;
        PGresult   *next_result = NULL;
        bool        last;
 
        if (!AcceptResult(result, false))
        {
            /*
             * Some error occurred, either a server-side failure or a failure
             * to submit the command string.  Record that.
             */
            const char *error = PQresultErrorMessage(result);
 
            if (strlen(error))
                pg_log_info("%s", error);
 
            CheckConnection();
            if (!is_watch)
                SetResultVariables(result, false);
 
            /* keep the result status before clearing it */
            result_status = PQresultStatus(result);
            ClearOrSaveResult(result);
            success = false;
 
            if (result_status == PGRES_PIPELINE_ABORTED)
                pg_log_info("Pipeline aborted, command did not run");
 
            /*
             * switch to next result
             */
            if (result_status == PGRES_COPY_BOTH ||
                result_status == PGRES_COPY_OUT ||
                result_status == PGRES_COPY_IN)
            {
                /*
                 * For some obscure reason PQgetResult does *not* return a
                 * NULL in copy cases despite the result having been cleared,
                 * but keeps returning an "empty" result that we have to
                 * ignore manually.
                 */
                result = NULL;
            }
            else if ((end_pipeline || pset.requested_results > 0)
                     && PQpipelineStatus(pset.db) != PQ_PIPELINE_OFF)
            {
                /*
                 * Error within a pipeline.  All commands are aborted until
                 * the next synchronisation point.  We need to consume all the
                 * results until this synchronisation point, or stop when
                 * there are no more result to discard.
                 *
                 * Checking the pipeline status is necessary for the case
                 * where the connection was reset.  The new connection is not
                 * in any kind of pipeline state and thus has no result to
                 * discard.
                 */
                result = discardAbortedPipelineResults();
            }
            else
                result = PQgetResult(pset.db);
 
            /*
             * Get current timing measure in case an error occurs
             */
            if (timing)
            {
                INSTR_TIME_SET_CURRENT(after);
                INSTR_TIME_SUBTRACT(after, before);
                *elapsed_msec = INSTR_TIME_GET_MILLISEC(after);
            }
 
            continue;
        }
        else if (svpt_gone_p && !*svpt_gone_p)
        {
            /*
             * Check if the user ran any command that would destroy our
             * internal savepoint: If the user did COMMIT AND CHAIN, RELEASE
             * or ROLLBACK, our savepoint is gone. If they issued a SAVEPOINT,
             * releasing ours would remove theirs.
             */
            const char *cmd = PQcmdStatus(result);
 
            *svpt_gone_p = (strcmp(cmd, "COMMIT") == 0 ||
                            strcmp(cmd, "SAVEPOINT") == 0 ||
                            strcmp(cmd, "RELEASE") == 0 ||
                            strcmp(cmd, "ROLLBACK") == 0);
        }
 
        result_status = PQresultStatus(result);
 
        /* must handle COPY before changing the current result */
        Assert(result_status != PGRES_COPY_BOTH);
        if (result_status == PGRES_COPY_IN ||
            result_status == PGRES_COPY_OUT)
        {
            FILE       *copy_stream = NULL;
 
            if (PQpipelineStatus(pset.db) != PQ_PIPELINE_OFF)
            {
                /*
                 * Running COPY within a pipeline can break the protocol
                 * synchronisation in multiple ways, and psql shows its limits
                 * when it comes to tracking this information.
                 *
                 * While in COPY mode, the backend process ignores additional
                 * Sync messages and will not send the matching ReadyForQuery
                 * expected by the frontend.
                 *
                 * Additionally, libpq automatically sends a Sync with the
                 * Copy message, creating an unexpected synchronisation point.
                 * A failure during COPY would leave the pipeline in an
                 * aborted state while the backend would be in a clean state,
                 * ready to process commands.
                 *
                 * Improving those issues would require modifications in how
                 * libpq handles pipelines and COPY.  Hence, for the time
                 * being, we forbid the use of COPY within a pipeline,
                 * aborting the connection to avoid an inconsistent state on
                 * psql side if trying to use a COPY command.
                 */
                pg_log_info("COPY in a pipeline is not supported, aborting connection");
                exit(EXIT_BADCONN);
            }
 
            /*
             * For COPY OUT, direct the output to the default place (probably
             * a pager pipe) for \watch, or to pset.copyStream for \copy,
             * otherwise to pset.gfname if that's set, otherwise to
             * pset.queryFout.
             */
            if (result_status == PGRES_COPY_OUT)
            {
                if (is_watch)
                {
                    /* invoked by \watch */
                    copy_stream = printQueryFout ? printQueryFout : pset.queryFout;
                }
                else if (pset.copyStream)
                {
                    /* invoked by \copy */
                    copy_stream = pset.copyStream;
                }
                else if (pset.gfname)
                {
                    /* COPY followed by \g filename or \g |program */
                    success &= SetupGOutput(&gfile_fout, &gfile_is_pipe);
                    if (gfile_fout)
                        copy_stream = gfile_fout;
                }
                else
                {
                    /* fall back to the generic query output stream */
                    copy_stream = pset.queryFout;
                }
            }
 
            /*
             * Even if the output stream could not be opened, we call
             * HandleCopyResult() with a NULL output stream to collect and
             * discard the COPY data.
             */
            success &= HandleCopyResult(&result, copy_stream);
        }
 
        /* If we have a chunked result, collect and print all chunks */
        if (result_status == PGRES_TUPLES_CHUNK)
        {
            FILE       *tuples_fout = printQueryFout ? printQueryFout : pset.queryFout;
            printQueryOpt my_popt = opt ? *opt : pset.popt;
            int64       total_tuples = 0;
            bool        is_pager = false;
            int         flush_error = 0;
 
            /* initialize print options for partial table output */
            my_popt.topt.start_table = true;
            my_popt.topt.stop_table = false;
            my_popt.topt.prior_records = 0;
 
            /* open \g file if needed */
            success &= SetupGOutput(&gfile_fout, &gfile_is_pipe);
            if (gfile_fout)
                tuples_fout = gfile_fout;
 
            /* force use of pager for any chunked resultset going to stdout */
            if (success && tuples_fout == stdout)
            {
                tuples_fout = PageOutput(INT_MAX, &(my_popt.topt));
                is_pager = true;
            }
 
            do
            {
                /*
                 * Display the current chunk of results, unless the output
                 * stream stopped working or we got canceled.  We skip use of
                 * PrintQueryResult and go directly to printQuery, so that we
                 * can pass the correct is_pager value and because we don't
                 * want PrintQueryStatus to happen yet.  Above, we rejected
                 * use of chunking for all cases in which PrintQueryResult
                 * would send the result to someplace other than printQuery.
                 */
                if (success && !flush_error && !cancel_pressed)
                {
                    printQuery(result, &my_popt, tuples_fout, is_pager, pset.logfile);
                    flush_error = fflush(tuples_fout);
                }
 
                /* after the first result set, disallow header decoration */
                my_popt.topt.start_table = false;
 
                /* count tuples before dropping the result */
                my_popt.topt.prior_records += PQntuples(result);
                total_tuples += PQntuples(result);
 
                ClearOrSaveResult(result);
 
                /* get the next result, loop if it's PGRES_TUPLES_CHUNK */
                result = PQgetResult(pset.db);
            } while (PQresultStatus(result) == PGRES_TUPLES_CHUNK);
 
            /* We expect an empty PGRES_TUPLES_OK, else there's a problem */
            if (PQresultStatus(result) == PGRES_TUPLES_OK)
            {
                char        buf[32];
 
                Assert(PQntuples(result) == 0);
 
                /* Display the footer using the empty result */
                if (success && !flush_error && !cancel_pressed)
                {
                    my_popt.topt.stop_table = true;
                    printQuery(result, &my_popt, tuples_fout, is_pager, pset.logfile);
                    fflush(tuples_fout);
                }
 
                if (is_pager)
                    ClosePager(tuples_fout);
 
                /*
                 * It's possible the data is from a RETURNING clause, in which
                 * case we need to print query status.
                 */
                PrintQueryStatus(result, printQueryFout);
 
                /*
                 * We must do a fake SetResultVariables(), since we don't have
                 * a PGresult corresponding to the whole query.
                 */
                SetVariable(pset.vars, "ERROR", "false");
                SetVariable(pset.vars, "SQLSTATE", "00000");
                snprintf(buf, sizeof(buf), INT64_FORMAT, total_tuples);
                SetVariable(pset.vars, "ROW_COUNT", buf);
                /* Prevent SetResultVariables call below */
                is_chunked_result = true;
 
                /* Clear the empty result so it isn't printed below */
                ClearOrSaveResult(result);
                result = NULL;
            }
            else
            {
                /* Probably an error report, so close the pager and print it */
                if (is_pager)
                    ClosePager(tuples_fout);
 
                success &= AcceptResult(result, true);
                /* SetResultVariables and ClearOrSaveResult happen below */
            }
        }
 
        if (result_status == PGRES_PIPELINE_SYNC)
        {
            Assert(pset.piped_syncs > 0);
 
            /*
             * Sync response, decrease the sync and requested_results
             * counters.
             */
            pset.piped_syncs--;
            pset.requested_results--;
 
            /*
             * After a synchronisation point, reset success state to print
             * possible successful results that will be processed after this.
             */
            success = true;
 
            /*
             * If all syncs were processed and pipeline end was requested,
             * exit pipeline mode.
             */
            if (end_pipeline && pset.piped_syncs == 0)
                success &= PQexitPipelineMode(pset.db);
        }
        else if (PQpipelineStatus(pset.db) != PQ_PIPELINE_OFF &&
                 result_status != PGRES_PIPELINE_SYNC)
        {
            /*
             * In a pipeline with a non-sync response?  Decrease the result
             * counters.
             */
            pset.available_results--;
            pset.requested_results--;
        }
 
        /*
         * Check PQgetResult() again.  In the typical case of a single-command
         * string, it will return NULL.  Otherwise, we'll have other results
         * to process.  We need to do that to check whether this is the last.
         */
        if (PQpipelineStatus(pset.db) == PQ_PIPELINE_OFF)
            next_result = PQgetResult(pset.db);
        else
        {
            /*
             * In pipeline mode, a NULL result indicates the end of the
             * current query being processed.  Call PQgetResult() once to
             * consume this state.
             */
            if (result_status != PGRES_PIPELINE_SYNC)
            {
                next_result = PQgetResult(pset.db);
                Assert(next_result == NULL);
            }
 
            /* Now, we can get the next result in the pipeline. */
            if (pset.requested_results > 0)
                next_result = PQgetResult(pset.db);
        }
 
        last = (next_result == NULL);
 
        /*
         * Update current timing measure.
         *
         * It will include the display of previous results, if any. This
         * cannot be helped because the server goes on processing further
         * queries anyway while the previous ones are being displayed. The
         * parallel execution of the client display hides the server time when
         * it is shorter.
         *
         * With combined queries, timing must be understood as an upper bound
         * of the time spent processing them.
         */
        if (timing)
        {
            INSTR_TIME_SET_CURRENT(after);
            INSTR_TIME_SUBTRACT(after, before);
            *elapsed_msec = INSTR_TIME_GET_MILLISEC(after);
        }
 
        /*
         * This may or may not print something depending on settings.
         *
         * A pipeline sync will have a non-NULL result but does not have
         * anything to print, thus ignore results in this case.
         */
        if (result != NULL && result_status != PGRES_PIPELINE_SYNC)
        {
            /*
             * If results need to be printed into the file specified by \g,
             * open it, unless we already did.  Note that when pset.gfname is
             * set, the passed-in value of printQueryFout is not used for
             * tuple output, but it's still used for status output.
             */
            FILE       *tuples_fout = printQueryFout;
 
            if (PQresultStatus(result) == PGRES_TUPLES_OK)
                success &= SetupGOutput(&gfile_fout, &gfile_is_pipe);
            if (gfile_fout)
                tuples_fout = gfile_fout;
            if (success)
                success &= PrintQueryResult(result, last, opt,
                                            tuples_fout, printQueryFout);
        }
 
        /* set variables from last result, unless dealt with elsewhere */
        if (last && !is_watch && !is_chunked_result)
            SetResultVariables(result, success);
 
        ClearOrSaveResult(result);
        result = next_result;
 
        if (cancel_pressed && PQpipelineStatus(pset.db) == PQ_PIPELINE_OFF)
        {
            /*
             * Outside of a pipeline, drop the next result, as well as any
             * others not yet read.
             *
             * Within a pipeline, we can let the outer loop handle this as an
             * aborted pipeline, which will discard then all the results.
             */
            ClearOrSaveResult(result);
            ClearOrSaveAllResults();
            break;
        }
    }
 
    /* close \g file if we opened it */
    CloseGOutput(gfile_fout, gfile_is_pipe);
 
    if (end_pipeline)
    {
        /* after a pipeline is processed, pipeline piped_syncs should be 0 */
        Assert(pset.piped_syncs == 0);
        /* all commands have been processed */
        Assert(pset.piped_commands == 0);
        /* all results were read */
        Assert(pset.available_results == 0);
    }
    Assert(pset.requested_results == 0);
    SetPipelineVariables();
 
    /* may need this to recover from conn loss during COPY */
    if (!CheckConnection())
        return -1;
 
    if (cancel_pressed || return_early)
        return 0;
 
    return success ? 1 : -1;
}
 
 
/*
 * Advance the given char pointer over white space and SQL comments.
 */
static const char *
skip_white_space(const char *query)
{
    int         cnestlevel = 0; /* slash-star comment nest level */
 
    while (*query)
    {
        int         mblen = PQmblenBounded(query, pset.encoding);
 
        /*
         * Note: we assume the encoding is a superset of ASCII, so that for
         * example "query[0] == '/'" is meaningful.  However, we do NOT assume
         * that the second and subsequent bytes of a multibyte character
         * couldn't look like ASCII characters; so it is critical to advance
         * by mblen, not 1, whenever we haven't exactly identified the
         * character we are skipping over.
         */
        if (isspace((unsigned char) *query))
            query += mblen;
        else if (query[0] == '/' && query[1] == '*')
        {
            cnestlevel++;
            query += 2;
        }
        else if (cnestlevel > 0 && query[0] == '*' && query[1] == '/')
        {
            cnestlevel--;
            query += 2;
        }
        else if (cnestlevel == 0 && query[0] == '-' && query[1] == '-')
        {
            query += 2;
 
            /*
             * We have to skip to end of line since any slash-star inside the
             * -- comment does NOT start a slash-star comment.
             */
            while (*query)
            {
                if (*query == '\n')
                {
                    query++;
                    break;
                }
                query += PQmblenBounded(query, pset.encoding);
            }
        }
        else if (cnestlevel > 0)
            query += mblen;
        else
            break;              /* found first token */
    }
 
    return query;
}
 
 
/*
 * Check whether a command is one of those for which we should NOT start
 * a new transaction block (ie, send a preceding BEGIN).
 *
 * These include the transaction control statements themselves, plus
 * certain statements that the backend disallows inside transaction blocks.
 */
static bool
command_no_begin(const char *query)
{
    int         wordlen;
 
    /*
     * First we must advance over any whitespace and comments.
     */
    query = skip_white_space(query);
 
    /*
     * Check word length (since "beginx" is not "begin").
     */
    wordlen = 0;
    while (isalpha((unsigned char) query[wordlen]))
        wordlen += PQmblenBounded(&query[wordlen], pset.encoding);
 
    /*
     * Transaction control commands.  These should include every keyword that
     * gives rise to a TransactionStmt in the backend grammar, except for the
     * savepoint-related commands.
     *
     * (We assume that START must be START TRANSACTION, since there is
     * presently no other "START foo" command.)
     */
    if (wordlen == 5 && pg_strncasecmp(query, "abort", 5) == 0)
        return true;
    if (wordlen == 5 && pg_strncasecmp(query, "begin", 5) == 0)
        return true;
    if (wordlen == 5 && pg_strncasecmp(query, "start", 5) == 0)
        return true;
    if (wordlen == 6 && pg_strncasecmp(query, "commit", 6) == 0)
        return true;
    if (wordlen == 3 && pg_strncasecmp(query, "end", 3) == 0)
        return true;
    if (wordlen == 8 && pg_strncasecmp(query, "rollback", 8) == 0)
        return true;
    if (wordlen == 7 && pg_strncasecmp(query, "prepare", 7) == 0)
    {
        /* PREPARE TRANSACTION is a TC command, PREPARE foo is not */
        query += wordlen;
 
        query = skip_white_space(query);
 
        wordlen = 0;
        while (isalpha((unsigned char) query[wordlen]))
            wordlen += PQmblenBounded(&query[wordlen], pset.encoding);
 
        if (wordlen == 11 && pg_strncasecmp(query, "transaction", 11) == 0)
            return true;
        return false;
    }
 
    /*
     * Commands not allowed within transactions.  The statements checked for
     * here should be exactly those that call PreventInTransactionBlock() in
     * the backend.
     */
    if (wordlen == 6 && pg_strncasecmp(query, "vacuum", 6) == 0)
        return true;
    if (wordlen == 7 && pg_strncasecmp(query, "cluster", 7) == 0)
    {
        /* CLUSTER with any arguments is allowed in transactions */
        query += wordlen;
 
        query = skip_white_space(query);
 
        if (isalpha((unsigned char) query[0]))
            return false;       /* has additional words */
        return true;            /* it's CLUSTER without arguments */
    }
 
    if (wordlen == 6 && pg_strncasecmp(query, "create", 6) == 0)
    {
        query += wordlen;
 
        query = skip_white_space(query);
 
        wordlen = 0;
        while (isalpha((unsigned char) query[wordlen]))
            wordlen += PQmblenBounded(&query[wordlen], pset.encoding);
 
        if (wordlen == 8 && pg_strncasecmp(query, "database", 8) == 0)
            return true;
        if (wordlen == 10 && pg_strncasecmp(query, "tablespace", 10) == 0)
            return true;
 
        /* CREATE [UNIQUE] INDEX CONCURRENTLY isn't allowed in xacts */
        if (wordlen == 6 && pg_strncasecmp(query, "unique", 6) == 0)
        {
            query += wordlen;
 
            query = skip_white_space(query);
 
            wordlen = 0;
            while (isalpha((unsigned char) query[wordlen]))
                wordlen += PQmblenBounded(&query[wordlen], pset.encoding);
        }
 
        if (wordlen == 5 && pg_strncasecmp(query, "index", 5) == 0)
        {
            query += wordlen;
 
            query = skip_white_space(query);
 
            wordlen = 0;
            while (isalpha((unsigned char) query[wordlen]))
                wordlen += PQmblenBounded(&query[wordlen], pset.encoding);
 
            if (wordlen == 12 && pg_strncasecmp(query, "concurrently", 12) == 0)
                return true;
        }
 
        return false;
    }
 
    if (wordlen == 5 && pg_strncasecmp(query, "alter", 5) == 0)
    {
        query += wordlen;
 
        query = skip_white_space(query);
 
        wordlen = 0;
        while (isalpha((unsigned char) query[wordlen]))
            wordlen += PQmblenBounded(&query[wordlen], pset.encoding);
 
        /* ALTER SYSTEM isn't allowed in xacts */
        if (wordlen == 6 && pg_strncasecmp(query, "system", 6) == 0)
            return true;
 
        return false;
    }
 
    /*
     * Note: these tests will match DROP SYSTEM and REINDEX TABLESPACE, which
     * aren't really valid commands so we don't care much. The other four
     * possible matches are correct.
     */
    if ((wordlen == 4 && pg_strncasecmp(query, "drop", 4) == 0) ||
        (wordlen == 7 && pg_strncasecmp(query, "reindex", 7) == 0))
    {
        query += wordlen;
 
        query = skip_white_space(query);
 
        wordlen = 0;
        while (isalpha((unsigned char) query[wordlen]))
            wordlen += PQmblenBounded(&query[wordlen], pset.encoding);
 
        if (wordlen == 8 && pg_strncasecmp(query, "database", 8) == 0)
            return true;
        if (wordlen == 6 && pg_strncasecmp(query, "system", 6) == 0)
            return true;
        if (wordlen == 10 && pg_strncasecmp(query, "tablespace", 10) == 0)
            return true;
        if (wordlen == 5 && (pg_strncasecmp(query, "index", 5) == 0 ||
                             pg_strncasecmp(query, "table", 5) == 0))
        {
            query += wordlen;
            query = skip_white_space(query);
            wordlen = 0;
            while (isalpha((unsigned char) query[wordlen]))
                wordlen += PQmblenBounded(&query[wordlen], pset.encoding);
 
            /*
             * REINDEX [ TABLE | INDEX ] CONCURRENTLY are not allowed in
             * xacts.
             */
            if (wordlen == 12 && pg_strncasecmp(query, "concurrently", 12) == 0)
                return true;
        }
 
        /* DROP INDEX CONCURRENTLY isn't allowed in xacts */
        if (wordlen == 5 && pg_strncasecmp(query, "index", 5) == 0)
        {
            query += wordlen;
 
            query = skip_white_space(query);
 
            wordlen = 0;
            while (isalpha((unsigned char) query[wordlen]))
                wordlen += PQmblenBounded(&query[wordlen], pset.encoding);
 
            if (wordlen == 12 && pg_strncasecmp(query, "concurrently", 12) == 0)
                return true;
 
            return false;
        }
 
        return false;
    }
 
    /* DISCARD ALL isn't allowed in xacts, but other variants are allowed. */
    if (wordlen == 7 && pg_strncasecmp(query, "discard", 7) == 0)
    {
        query += wordlen;
 
        query = skip_white_space(query);
 
        wordlen = 0;
        while (isalpha((unsigned char) query[wordlen]))
            wordlen += PQmblenBounded(&query[wordlen], pset.encoding);
 
        if (wordlen == 3 && pg_strncasecmp(query, "all", 3) == 0)
            return true;
        return false;
    }
 
    return false;
}
 
 
/*
 * Test if the current user is a database superuser.
 */
bool
is_superuser(void)
{
    const char *val;
 
    if (!pset.db)
        return false;
 
    val = PQparameterStatus(pset.db, "is_superuser");
 
    if (val && strcmp(val, "on") == 0)
        return true;
 
    return false;
}
 
 
/*
 * Test if the current session uses standard string literals.
 */
bool
standard_strings(void)
{
    const char *val;
 
    if (!pset.db)
        return false;
 
    val = PQparameterStatus(pset.db, "standard_conforming_strings");
 
    if (val && strcmp(val, "on") == 0)
        return true;
 
    return false;
}
 
 
/*
 * Return the session user of the current connection.
 */
const char *
session_username(void)
{
    const char *val;
 
    if (!pset.db)
        return NULL;
 
    val = PQparameterStatus(pset.db, "session_authorization");
    if (val)
        return val;
    else
        return PQuser(pset.db);
}
 
/*
 * Return the value of option for keyword in the current connection.
 *
 * The caller is responsible for freeing the result value allocated.
 */
char *
get_conninfo_value(const char *keyword)
{
    PQconninfoOption *opts;
    PQconninfoOption *serviceopt = NULL;
    char       *res = NULL;
 
    if (pset.db == NULL)
        return NULL;
 
    opts = PQconninfo(pset.db);
    if (opts == NULL)
        return NULL;
 
    for (PQconninfoOption *opt = opts; opt->keyword != NULL; ++opt)
    {
        if (strcmp(opt->keyword, keyword) == 0)
        {
            serviceopt = opt;
            break;
        }
    }
 
    /* Take a copy of the value, as it is freed by PQconninfoFree(). */
    if (serviceopt && serviceopt->val != NULL)
        res = pg_strdup(serviceopt->val);
    PQconninfoFree(opts);
 
    return res;
}
 
/* expand_tilde
 *
 * substitute '~' with HOME or '~username' with username's home dir
 *
 */
void
expand_tilde(char **filename)
{
    if (!filename || !(*filename))
        return;
 
    /*
     * WIN32 doesn't use tilde expansion for file names. Also, it uses tilde
     * for short versions of long file names, though the tilde is usually
     * toward the end, not at the beginning.
     */
#ifndef WIN32
 
    /* try tilde expansion */
    if (**filename == '~')
    {
        char       *fn;
        char        oldp,
                   *p;
        struct passwd *pw;
        char        home[MAXPGPATH];
 
        fn = *filename;
        *home = '\0';
 
        p = fn + 1;
        while (*p != '/' && *p != '\0')
            p++;
 
        oldp = *p;
        *p = '\0';
 
        if (*(fn + 1) == '\0')
            get_home_path(home);    /* ~ or ~/ only */
        else if ((pw = getpwnam(fn + 1)) != NULL)
            strlcpy(home, pw->pw_dir, sizeof(home));    /* ~user */
 
        *p = oldp;
        if (strlen(home) != 0)
        {
            char       *newfn;
 
            newfn = psprintf("%s%s", home, p);
            free(fn);
            *filename = newfn;
        }
    }
#endif
}
 
/*
 * Checks if connection string starts with either of the valid URI prefix
 * designators.
 *
 * Returns the URI prefix length, 0 if the string doesn't contain a URI prefix.
 *
 * XXX This is a duplicate of the eponymous libpq function.
 */
static int
uri_prefix_length(const char *connstr)
{
    /* The connection URI must start with either of the following designators: */
    static const char uri_designator[] = "postgresql://";
    static const char short_uri_designator[] = "postgres://";
 
    if (strncmp(connstr, uri_designator,
                sizeof(uri_designator) - 1) == 0)
        return sizeof(uri_designator) - 1;
 
    if (strncmp(connstr, short_uri_designator,
                sizeof(short_uri_designator) - 1) == 0)
        return sizeof(short_uri_designator) - 1;
 
    return 0;
}
 
/*
 * Reset state related to extended query protocol
 *
 * Clean up any state related to bind parameters, statement name and
 * PSQL_SEND_MODE.  This needs to be called after processing a query or when
 * running a new meta-command that uses the extended query protocol, like
 * \parse, \bind, etc.
 */
void
clean_extended_state(void)
{
    int         i;
 
    switch (pset.send_mode)
    {
        case PSQL_SEND_EXTENDED_CLOSE:  /* \close_prepared */
            free(pset.stmtName);
            break;
        case PSQL_SEND_EXTENDED_PARSE:  /* \parse */
            free(pset.stmtName);
            break;
        case PSQL_SEND_EXTENDED_QUERY_PARAMS:   /* \bind */
        case PSQL_SEND_EXTENDED_QUERY_PREPARED: /* \bind_named */
            for (i = 0; i < pset.bind_nparams; i++)
                free(pset.bind_params[i]);
            free(pset.bind_params);
            free(pset.stmtName);
            pset.bind_params = NULL;
            break;
        case PSQL_SEND_QUERY:
        case PSQL_SEND_START_PIPELINE_MODE: /* \startpipeline */
        case PSQL_SEND_END_PIPELINE_MODE:   /* \endpipeline */
        case PSQL_SEND_PIPELINE_SYNC:   /* \syncpipeline */
        case PSQL_SEND_FLUSH:   /* \flush */
        case PSQL_SEND_GET_RESULTS: /* \getresults */
        case PSQL_SEND_FLUSH_REQUEST:   /* \flushrequest */
            break;
    }
 
    pset.stmtName = NULL;
    pset.send_mode = PSQL_SEND_QUERY;
}
 
/*
 * Recognized connection string either starts with a valid URI prefix or
 * contains a "=" in it.
 *
 * Must be consistent with parse_connection_string: anything for which this
 * returns true should at least look like it's parseable by that routine.
 *
 * XXX This is a duplicate of the eponymous libpq function.
 */
bool
recognized_connection_string(const char *connstr)
{
    return uri_prefix_length(connstr) != 0 || strchr(connstr, '=') != NULL;
}