6.9/chimeraos #17

flukejones · 2024-08-28T00:44:18Z

No description provided.

Normally systems don't wake up from s2idle when the AC adapter has changed, but users or other drivers may have a desire to configure this behavior. Add the ability for the LPS0 device to wake the system when AC adapter changes. Also add a new member to `struct acpi_s2idle_dev_ops` to let drivers indicate the system should wakeup by default from AC adapter changes. Signed-off-by: Mario Limonciello <[email protected]>

This driver adds full support of the ASUS ROG Ally gamepad: - dinput is translated to XBox controller (Ally-X only) - default mode has the QAM buttons mapped (Ally-X only) * left is XBox button * right is an XBox + A combo for steam QAM - force feedback is supported (Ally-X only) - LED brightness control (0-2) - LED multicolor class support for all 4 LED, individually addressable - Support all configuration Where "Ally-X only" is mentioned, this is because the Ally 1 uses the existing xpad driver. The configuration options available are: - Gamepad mode (game, wasd, mouse) - Remapping each button, plus macro map (hold a macro button and press other) - Joystrick and trigger deadzones - Gamepad vibration intensity - Leds (using multicolor class) - Button turbo abilities (per button) - Joystick repsonse curves - Joystick anti-deadzones The attribute path tree looks like this: - `./sys/../<USB HID>/` - `joystick_left/ - `deadzone` - `mapping` (mouse, wasd, custom) - `anti_deadzone` - `response_curve` - `calibration` - `calibration_reset` - `trigger_left/ - `deadzone` - `response_curve` - `calibration` - `calibration_reset` - `gamepad_mode` - `button_mapping` - `A` - `B` - `dpad_left` - etc No settings are applied until `apply_all` is written to. The exception is for calibrations. While there is calibration ability, it can be difficult to get correct and is heavily device dependent, as such it is set when written and not when `apply_all` is written to. On driver load the set calibrations are retrieved - this may be what you've set in Linux, Windows, or factory defaults. As a note: the proper way to set calibrations is to read the joystick voltage from the EC whcih currently is not possible. Signed-off-by: Luke D. Jones <[email protected]>

Adjust the CSEE quirk call ordering and time delay. Attempts to fix issues where the MCU isn't provided enough time to complete USB device disconnection or reconnection, particularly in powersave mode. Signed-off-by: Luke D. Jones <[email protected]>

A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] ChimeraOS#8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] ChimeraOS#9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 ChimeraOS#10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 ChimeraOS#11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 ChimeraOS#12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c ChimeraOS#13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b ChimeraOS#14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 ChimeraOS#15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 ChimeraOS#16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f ChimeraOS#17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers. Fixes: d519e17 ("net: export device speed and duplex via sysfs") Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show") Signed-off-by: Jamie Bainbridge <[email protected]> Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com Signed-off-by: Jakub Kicinski <[email protected]>

[ Upstream commit a699781 ] A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] ChimeraOS#8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] ChimeraOS#9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 ChimeraOS#10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 ChimeraOS#11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 ChimeraOS#12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c ChimeraOS#13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b ChimeraOS#14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 ChimeraOS#15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 ChimeraOS#16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f ChimeraOS#17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers. Fixes: d519e17 ("net: export device speed and duplex via sysfs") Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show") Signed-off-by: Jamie Bainbridge <[email protected]> Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit dc09f00 ] During noirq suspend phase the Raspberry Pi power driver suffer of firmware property timeouts. The reason is that the IRQ of the underlying BCM2835 mailbox is disabled and rpi_firmware_property_list() will always run into a timeout [1]. Since the VideoCore side isn't consider as a wakeup source, set the IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled during suspend-resume cycle. [1] PM: late suspend of devices complete after 1.754 msecs WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128 rpi_firmware_property_list+0x204/0x22c Firmware transaction 0x00028001 timeout Modules linked in: CPU: 0 PID: 438 Comm: bash Tainted: G C 6.9.3-dirty ChimeraOS#17 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0x88/0xec __warn from warn_slowpath_fmt+0x7c/0xb0 warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0 rpi_firmware_set_power from _genpd_power_off+0xe4/0x148 _genpd_power_off from genpd_sync_power_off+0x7c/0x11c genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0 genpd_finish_suspend from dpm_run_callback+0x78/0xd0 dpm_run_callback from device_suspend_noirq+0xc0/0x238 device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168 dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac suspend_devices_and_enter from pm_suspend+0x254/0x2e4 pm_suspend from state_store+0xa8/0xd4 state_store from kernfs_fop_write_iter+0x154/0x1a0 kernfs_fop_write_iter from vfs_write+0x12c/0x184 vfs_write from ksys_write+0x78/0xc0 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xcc93dfa8 to 0xcc93dff0) [...] PM: noirq suspend of devices complete after 3095.584 msecs Link: raspberrypi/firmware#1894 Fixes: 0bae6af ("mailbox: Enable BCM2835 mailbox support") Signed-off-by: Stefan Wahren <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: Jassi Brar <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 9af2efe upstream. The fields in the hist_entry are filled on-demand which means they only have meaningful values when relevant sort keys are used. So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in the hist entry can be garbage. So it shouldn't access it unconditionally. I got a segfault, when I wanted to see cgroup profiles. $ sudo perf record -a --all-cgroups --synth=cgroup true $ sudo perf report -s cgroup Program received signal SIGSEGV, Segmentation fault. 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 48 return RC_CHK_ACCESS(map)->dso; (gdb) bt #0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 #1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344 #2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385 ChimeraOS#3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true) at util/hist.c:644 ChimeraOS#4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761 ChimeraOS#5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779 ChimeraOS#6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015 ChimeraOS#7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0) at util/hist.c:1260 ChimeraOS#8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at builtin-report.c:334 ChimeraOS#9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232 ChimeraOS#10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128, sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271 ChimeraOS#11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354 ChimeraOS#12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132 ChimeraOS#13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245 ChimeraOS#14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324 ChimeraOS#15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342 ChimeraOS#16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60) at util/session.c:780 ChimeraOS#17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688, file_path=0x555556038ff0 "perf.data") at util/session.c:1406 As you can see the entry->ms.map was NULL even if he->ms.map has a value. This is because 'sym' sort key is not given, so it cannot assume whether he->ms.sym and entry->ms.sym is the same. I only checked the 'sym' sort key here as it implies 'dso' behavior (so maps are the same). Fixes: ac01c8c ("perf hist: Update hist symbol when updating maps") Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Matt Fleming <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

My colleague Wupeng found the following problems during fault injection: BUG: unable to handle page fault for address: fffffbfff809d073 PGD 6e648067 P4D 123ec8067 PUD 123ec4067 PMD 100e38067 PTE 0 Oops: Oops: 0000 [ChimeraOS#1] PREEMPT SMP KASAN NOPTI CPU: 5 UID: 0 PID: 755 Comm: modprobe Not tainted 6.12.0-rc3+ ChimeraOS#17 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:__asan_load8+0x4c/0xa0 ... Call Trace: <TASK> blkdev_put_whole+0x41/0x70 bdev_release+0x1a3/0x250 blkdev_release+0x11/0x20 __fput+0x1d7/0x4a0 task_work_run+0xfc/0x180 syscall_exit_to_user_mode+0x1de/0x1f0 do_syscall_64+0x6b/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e loop_init() is calling loop_add() after __register_blkdev() succeeds and is ignoring disk_add() failure from loop_add(), for loop_add() failure is not fatal and successfully created disks are already visible to bdev_open(). brd_init() is currently calling brd_alloc() before __register_blkdev() succeeds and is releasing successfully created disks when brd_init() returns an error. This can cause UAF for the latter two case: case 1: T1: modprobe brd brd_init brd_alloc(0) // success add_disk disk_scan_partitions bdev_file_open_by_dev // alloc file fput // won't free until back to userspace brd_alloc(1) // failed since mem alloc error inject // error path for modprobe will release code segment // back to userspace __fput blkdev_release bdev_release blkdev_put_whole bdev->bd_disk->fops->release // fops is freed now, UAF! case 2: T1: T2: modprobe brd brd_init brd_alloc(0) // success open(/dev/ram0) brd_alloc(1) // fail // error path for modprobe close(/dev/ram0) ... /* UAF! */ bdev->bd_disk->fops->release Fix this problem by following what loop_init() does. Besides, reintroduce brd_devices_mutex to help serialize modifications to brd_list. Fixes: 7f9b348 ("brd: convert to blk_alloc_disk/blk_cleanup_disk") Reported-by: Wupeng Ma <[email protected]> Signed-off-by: Yang Erkun <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>

…dfl() When getting an LLC CPU mask in the default CPU selection policy, scx_select_cpu_dfl(), a pointer to the sched_domain is dereferenced using rcu_read_lock() without holding rcu_read_lock(). Such an unprotected dereference often causes the following warning and can cause an invalid memory access in the worst case. Therefore, protect dereference of a sched_domain pointer using a pair of rcu_read_lock() and unlock(). [ 20.996135] ============================= [ 20.996345] WARNING: suspicious RCU usage [ 20.996563] 6.11.0-virtme ChimeraOS#17 Tainted: G W [ 20.996576] ----------------------------- [ 20.996576] kernel/sched/ext.c:3323 suspicious rcu_dereference_check() usage! [ 20.996576] [ 20.996576] other info that might help us debug this: [ 20.996576] [ 20.996576] [ 20.996576] rcu_scheduler_active = 2, debug_locks = 1 [ 20.996576] 4 locks held by kworker/8:1/140: [ 20.996576] #0: ffff8b18c00dd348 ((wq_completion)pm){+.+.}-{0:0}, at: process_one_work+0x4a0/0x590 [ 20.996576] ChimeraOS#1: ffffb3da01f67e58 ((work_completion)(&dev->power.work)){+.+.}-{0:0}, at: process_one_work+0x1ba/0x590 [ 20.996576] ChimeraOS#2: ffffffffa316f9f0 (&rcu_state.gp_wq){..-.}-{2:2}, at: swake_up_one+0x15/0x60 [ 20.996576] ChimeraOS#3: ffff8b1880398a60 (&p->pi_lock){-.-.}-{2:2}, at: try_to_wake_up+0x59/0x7d0 [ 20.996576] [ 20.996576] stack backtrace: [ 20.996576] CPU: 8 UID: 0 PID: 140 Comm: kworker/8:1 Tainted: G W 6.11.0-virtme ChimeraOS#17 [ 20.996576] Tainted: [W]=WARN [ 20.996576] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 20.996576] Workqueue: pm pm_runtime_work [ 20.996576] Sched_ext: simple (disabling+all), task: runnable_at=-6ms [ 20.996576] Call Trace: [ 20.996576] <IRQ> [ 20.996576] dump_stack_lvl+0x6f/0xb0 [ 20.996576] lockdep_rcu_suspicious.cold+0x4e/0x96 [ 20.996576] scx_select_cpu_dfl+0x234/0x260 [ 20.996576] select_task_rq_scx+0xfb/0x190 [ 20.996576] select_task_rq+0x47/0x110 [ 20.996576] try_to_wake_up+0x110/0x7d0 [ 20.996576] swake_up_one+0x39/0x60 [ 20.996576] rcu_core+0xb08/0xe50 [ 20.996576] ? srso_alias_return_thunk+0x5/0xfbef5 [ 20.996576] ? mark_held_locks+0x40/0x70 [ 20.996576] handle_softirqs+0xd3/0x410 [ 20.996576] irq_exit_rcu+0x78/0xa0 [ 20.996576] sysvec_apic_timer_interrupt+0x73/0x80 [ 20.996576] </IRQ> [ 20.996576] <TASK> [ 20.996576] asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ 20.996576] RIP: 0010:_raw_spin_unlock_irqrestore+0x36/0x70 [ 20.996576] Code: f5 53 48 8b 74 24 10 48 89 fb 48 83 c7 18 e8 11 b4 36 ff 48 89 df e8 99 0d 37 ff f7 c5 00 02 00 00 75 17 9c 58 f6 c4 02 75 2b <65> ff 0d 5b 55 3c 5e 74 16 5b 5d e9 95 8e 28 00 e8 a5 ee 44 ff 9c [ 20.996576] RSP: 0018:ffffb3da01f67d20 EFLAGS: 00000246 [ 20.996576] RAX: 0000000000000002 RBX: ffffffffa4640220 RCX: 0000000000000040 [ 20.996576] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffa1c7b27b [ 20.996576] RBP: 0000000000000246 R08: 0000000000000001 R09: 0000000000000000 [ 20.996576] R10: 0000000000000001 R11: 000000000000021c R12: 0000000000000246 [ 20.996576] R13: ffff8b1881363958 R14: 0000000000000000 R15: ffff8b1881363800 [ 20.996576] ? _raw_spin_unlock_irqrestore+0x4b/0x70 [ 20.996576] serial_port_runtime_resume+0xd4/0x1a0 [ 20.996576] ? __pfx_serial_port_runtime_resume+0x10/0x10 [ 20.996576] __rpm_callback+0x44/0x170 [ 20.996576] ? __pfx_serial_port_runtime_resume+0x10/0x10 [ 20.996576] rpm_callback+0x55/0x60 [ 20.996576] ? __pfx_serial_port_runtime_resume+0x10/0x10 [ 20.996576] rpm_resume+0x582/0x7b0 [ 20.996576] pm_runtime_work+0x7c/0xb0 [ 20.996576] process_one_work+0x1fb/0x590 [ 20.996576] worker_thread+0x18e/0x350 [ 20.996576] ? __pfx_worker_thread+0x10/0x10 [ 20.996576] kthread+0xe2/0x110 [ 20.996576] ? __pfx_kthread+0x10/0x10 [ 20.996576] ret_from_fork+0x34/0x50 [ 20.996576] ? __pfx_kthread+0x10/0x10 [ 20.996576] ret_from_fork_asm+0x1a/0x30 [ 20.996576] </TASK> [ 21.056592] sched_ext: BPF scheduler "simple" disabled (unregistered from user space) Signed-off-by: Changwoo Min <[email protected]> Acked-by: Andrea Righi <[email protected]> Signed-off-by: Tejun Heo <[email protected]>

[ Upstream commit 826cc42 ] My colleague Wupeng found the following problems during fault injection: BUG: unable to handle page fault for address: fffffbfff809d073 PGD 6e648067 P4D 123ec8067 PUD 123ec4067 PMD 100e38067 PTE 0 Oops: Oops: 0000 [ChimeraOS#1] PREEMPT SMP KASAN NOPTI CPU: 5 UID: 0 PID: 755 Comm: modprobe Not tainted 6.12.0-rc3+ ChimeraOS#17 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:__asan_load8+0x4c/0xa0 ... Call Trace: <TASK> blkdev_put_whole+0x41/0x70 bdev_release+0x1a3/0x250 blkdev_release+0x11/0x20 __fput+0x1d7/0x4a0 task_work_run+0xfc/0x180 syscall_exit_to_user_mode+0x1de/0x1f0 do_syscall_64+0x6b/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e loop_init() is calling loop_add() after __register_blkdev() succeeds and is ignoring disk_add() failure from loop_add(), for loop_add() failure is not fatal and successfully created disks are already visible to bdev_open(). brd_init() is currently calling brd_alloc() before __register_blkdev() succeeds and is releasing successfully created disks when brd_init() returns an error. This can cause UAF for the latter two case: case 1: T1: modprobe brd brd_init brd_alloc(0) // success add_disk disk_scan_partitions bdev_file_open_by_dev // alloc file fput // won't free until back to userspace brd_alloc(1) // failed since mem alloc error inject // error path for modprobe will release code segment // back to userspace __fput blkdev_release bdev_release blkdev_put_whole bdev->bd_disk->fops->release // fops is freed now, UAF! case 2: T1: T2: modprobe brd brd_init brd_alloc(0) // success open(/dev/ram0) brd_alloc(1) // fail // error path for modprobe close(/dev/ram0) ... /* UAF! */ bdev->bd_disk->fops->release Fix this problem by following what loop_init() does. Besides, reintroduce brd_devices_mutex to help serialize modifications to brd_list. Fixes: 7f9b348 ("brd: convert to blk_alloc_disk/blk_cleanup_disk") Reported-by: Wupeng Ma <[email protected]> Signed-off-by: Yang Erkun <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 17af2b3 upstream. The workqueue should be destroyed in mtk_jpeg_core.c since commit 09aea13 ("media: mtk-jpeg: refactor some variables"), otherwise the below calltrace can be easily triggered. [ 677.862514] Unable to handle kernel paging request at virtual address dfff800000000023 [ 677.863633] KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f] ... [ 677.879654] CPU: 6 PID: 1071 Comm: modprobe Tainted: G O 6.8.12-mtk+gfa1a78e5d24b+ #17 ... [ 677.882838] pc : destroy_workqueue+0x3c/0x770 [ 677.883413] lr : mtk_jpegdec_destroy_workqueue+0x70/0x88 [mtk_jpeg_dec_hw] [ 677.884314] sp : ffff80008ad974f0 [ 677.884744] x29: ffff80008ad974f0 x28: ffff0000d7115580 x27: ffff0000dd691070 [ 677.885669] x26: ffff0000dd691408 x25: ffff8000844af3e0 x24: ffff80008ad97690 [ 677.886592] x23: ffff0000e051d400 x22: ffff0000dd691010 x21: dfff800000000000 [ 677.887515] x20: 0000000000000000 x19: 0000000000000000 x18: ffff800085397ac0 [ 677.888438] x17: 0000000000000000 x16: ffff8000801b87c8 x15: 1ffff000115b2e10 [ 677.889361] x14: 00000000f1f1f1f1 x13: 0000000000000000 x12: ffff7000115b2e4d [ 677.890285] x11: 1ffff000115b2e4c x10: ffff7000115b2e4c x9 : ffff80000aa43e90 [ 677.891208] x8 : 00008fffeea4d1b4 x7 : ffff80008ad97267 x6 : 0000000000000001 [ 677.892131] x5 : ffff80008ad97260 x4 : ffff7000115b2e4d x3 : 0000000000000000 [ 677.893054] x2 : 0000000000000023 x1 : dfff800000000000 x0 : 0000000000000118 [ 677.893977] Call trace: [ 677.894297] destroy_workqueue+0x3c/0x770 [ 677.894826] mtk_jpegdec_destroy_workqueue+0x70/0x88 [mtk_jpeg_dec_hw] [ 677.895677] devm_action_release+0x50/0x90 [ 677.896211] release_nodes+0xe8/0x170 [ 677.896688] devres_release_all+0xf8/0x178 [ 677.897219] device_unbind_cleanup+0x24/0x170 [ 677.897785] device_release_driver_internal+0x35c/0x480 [ 677.898461] device_release_driver+0x20/0x38 ... [ 677.912665] ---[ end trace 0000000000000000 ]--- Fixes: 09aea13 ("media: mtk-jpeg: refactor some variables") Cc: <[email protected]> Signed-off-by: Guoqing Jiang <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit dc8aea4 upstream. In binder_add_freeze_work() we iterate over the proc->nodes with the proc->inner_lock held. However, this lock is temporarily dropped in order to acquire the node->lock first (lock nesting order). This can race with binder_node_release() and trigger a use-after-free: ================================================================== BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x19c Write of size 4 at addr ffff53c04c29dd04 by task freeze/640 CPU: 5 UID: 0 PID: 640 Comm: freeze Not tainted 6.11.0-07343-ga727812a8d45 #17 Hardware name: linux,dummy-virt (DT) Call trace: _raw_spin_lock+0xe4/0x19c binder_add_freeze_work+0x148/0x478 binder_ioctl+0x1e70/0x25ac __arm64_sys_ioctl+0x124/0x190 Allocated by task 637: __kmalloc_cache_noprof+0x12c/0x27c binder_new_node+0x50/0x700 binder_transaction+0x35ac/0x6f74 binder_thread_write+0xfb8/0x42a0 binder_ioctl+0x18f0/0x25ac __arm64_sys_ioctl+0x124/0x190 Freed by task 637: kfree+0xf0/0x330 binder_thread_read+0x1e88/0x3a68 binder_ioctl+0x16d8/0x25ac __arm64_sys_ioctl+0x124/0x190 ================================================================== Fix the race by taking a temporary reference on the node before releasing the proc->inner lock. This ensures the node remains alive while in use. Fixes: d579b04 ("binder: frozen notification") Cc: [email protected] Reviewed-by: Alice Ryhl <[email protected]> Acked-by: Todd Kjos <[email protected]> Signed-off-by: Carlos Llamas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

…dfl() [ Upstream commit f39489f ] When getting an LLC CPU mask in the default CPU selection policy, scx_select_cpu_dfl(), a pointer to the sched_domain is dereferenced using rcu_read_lock() without holding rcu_read_lock(). Such an unprotected dereference often causes the following warning and can cause an invalid memory access in the worst case. Therefore, protect dereference of a sched_domain pointer using a pair of rcu_read_lock() and unlock(). [ 20.996135] ============================= [ 20.996345] WARNING: suspicious RCU usage [ 20.996563] 6.11.0-virtme ChimeraOS#17 Tainted: G W [ 20.996576] ----------------------------- [ 20.996576] kernel/sched/ext.c:3323 suspicious rcu_dereference_check() usage! [ 20.996576] [ 20.996576] other info that might help us debug this: [ 20.996576] [ 20.996576] [ 20.996576] rcu_scheduler_active = 2, debug_locks = 1 [ 20.996576] 4 locks held by kworker/8:1/140: [ 20.996576] #0: ffff8b18c00dd348 ((wq_completion)pm){+.+.}-{0:0}, at: process_one_work+0x4a0/0x590 [ 20.996576] #1: ffffb3da01f67e58 ((work_completion)(&dev->power.work)){+.+.}-{0:0}, at: process_one_work+0x1ba/0x590 [ 20.996576] #2: ffffffffa316f9f0 (&rcu_state.gp_wq){..-.}-{2:2}, at: swake_up_one+0x15/0x60 [ 20.996576] ChimeraOS#3: ffff8b1880398a60 (&p->pi_lock){-.-.}-{2:2}, at: try_to_wake_up+0x59/0x7d0 [ 20.996576] [ 20.996576] stack backtrace: [ 20.996576] CPU: 8 UID: 0 PID: 140 Comm: kworker/8:1 Tainted: G W 6.11.0-virtme ChimeraOS#17 [ 20.996576] Tainted: [W]=WARN [ 20.996576] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 20.996576] Workqueue: pm pm_runtime_work [ 20.996576] Sched_ext: simple (disabling+all), task: runnable_at=-6ms [ 20.996576] Call Trace: [ 20.996576] <IRQ> [ 20.996576] dump_stack_lvl+0x6f/0xb0 [ 20.996576] lockdep_rcu_suspicious.cold+0x4e/0x96 [ 20.996576] scx_select_cpu_dfl+0x234/0x260 [ 20.996576] select_task_rq_scx+0xfb/0x190 [ 20.996576] select_task_rq+0x47/0x110 [ 20.996576] try_to_wake_up+0x110/0x7d0 [ 20.996576] swake_up_one+0x39/0x60 [ 20.996576] rcu_core+0xb08/0xe50 [ 20.996576] ? srso_alias_return_thunk+0x5/0xfbef5 [ 20.996576] ? mark_held_locks+0x40/0x70 [ 20.996576] handle_softirqs+0xd3/0x410 [ 20.996576] irq_exit_rcu+0x78/0xa0 [ 20.996576] sysvec_apic_timer_interrupt+0x73/0x80 [ 20.996576] </IRQ> [ 20.996576] <TASK> [ 20.996576] asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ 20.996576] RIP: 0010:_raw_spin_unlock_irqrestore+0x36/0x70 [ 20.996576] Code: f5 53 48 8b 74 24 10 48 89 fb 48 83 c7 18 e8 11 b4 36 ff 48 89 df e8 99 0d 37 ff f7 c5 00 02 00 00 75 17 9c 58 f6 c4 02 75 2b <65> ff 0d 5b 55 3c 5e 74 16 5b 5d e9 95 8e 28 00 e8 a5 ee 44 ff 9c [ 20.996576] RSP: 0018:ffffb3da01f67d20 EFLAGS: 00000246 [ 20.996576] RAX: 0000000000000002 RBX: ffffffffa4640220 RCX: 0000000000000040 [ 20.996576] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffa1c7b27b [ 20.996576] RBP: 0000000000000246 R08: 0000000000000001 R09: 0000000000000000 [ 20.996576] R10: 0000000000000001 R11: 000000000000021c R12: 0000000000000246 [ 20.996576] R13: ffff8b1881363958 R14: 0000000000000000 R15: ffff8b1881363800 [ 20.996576] ? _raw_spin_unlock_irqrestore+0x4b/0x70 [ 20.996576] serial_port_runtime_resume+0xd4/0x1a0 [ 20.996576] ? __pfx_serial_port_runtime_resume+0x10/0x10 [ 20.996576] __rpm_callback+0x44/0x170 [ 20.996576] ? __pfx_serial_port_runtime_resume+0x10/0x10 [ 20.996576] rpm_callback+0x55/0x60 [ 20.996576] ? __pfx_serial_port_runtime_resume+0x10/0x10 [ 20.996576] rpm_resume+0x582/0x7b0 [ 20.996576] pm_runtime_work+0x7c/0xb0 [ 20.996576] process_one_work+0x1fb/0x590 [ 20.996576] worker_thread+0x18e/0x350 [ 20.996576] ? __pfx_worker_thread+0x10/0x10 [ 20.996576] kthread+0xe2/0x110 [ 20.996576] ? __pfx_kthread+0x10/0x10 [ 20.996576] ret_from_fork+0x34/0x50 [ 20.996576] ? __pfx_kthread+0x10/0x10 [ 20.996576] ret_from_fork_asm+0x1a/0x30 [ 20.996576] </TASK> [ 21.056592] sched_ext: BPF scheduler "simple" disabled (unregistered from user space) Signed-off-by: Changwoo Min <[email protected]> Acked-by: Andrea Righi <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit d62b04f upstream. Haowei Yan <[email protected]> found that ets_class_from_arg() can index an Out-Of-Bound class in ets_class_from_arg() when passed clid of 0. The overflow may cause local privilege escalation. [ 18.852298] ------------[ cut here ]------------ [ 18.853271] UBSAN: array-index-out-of-bounds in net/sched/sch_ets.c:93:20 [ 18.853743] index 18446744073709551615 is out of range for type 'ets_class [16]' [ 18.854254] CPU: 0 UID: 0 PID: 1275 Comm: poc Not tainted 6.12.6-dirty ChimeraOS#17 [ 18.854821] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [ 18.856532] Call Trace: [ 18.857441] <TASK> [ 18.858227] dump_stack_lvl+0xc2/0xf0 [ 18.859607] dump_stack+0x10/0x20 [ 18.860908] __ubsan_handle_out_of_bounds+0xa7/0xf0 [ 18.864022] ets_class_change+0x3d6/0x3f0 [ 18.864322] tc_ctl_tclass+0x251/0x910 [ 18.864587] ? lock_acquire+0x5e/0x140 [ 18.865113] ? __mutex_lock+0x9c/0xe70 [ 18.866009] ? __mutex_lock+0xa34/0xe70 [ 18.866401] rtnetlink_rcv_msg+0x170/0x6f0 [ 18.866806] ? __lock_acquire+0x578/0xc10 [ 18.867184] ? __pfx_rtnetlink_rcv_msg+0x10/0x10 [ 18.867503] netlink_rcv_skb+0x59/0x110 [ 18.867776] rtnetlink_rcv+0x15/0x30 [ 18.868159] netlink_unicast+0x1c3/0x2b0 [ 18.868440] netlink_sendmsg+0x239/0x4b0 [ 18.868721] ____sys_sendmsg+0x3e2/0x410 [ 18.869012] ___sys_sendmsg+0x88/0xe0 [ 18.869276] ? rseq_ip_fixup+0x198/0x260 [ 18.869563] ? rseq_update_cpu_node_id+0x10a/0x190 [ 18.869900] ? trace_hardirqs_off+0x5a/0xd0 [ 18.870196] ? syscall_exit_to_user_mode+0xcc/0x220 [ 18.870547] ? do_syscall_64+0x93/0x150 [ 18.870821] ? __memcg_slab_free_hook+0x69/0x290 [ 18.871157] __sys_sendmsg+0x69/0xd0 [ 18.871416] __x64_sys_sendmsg+0x1d/0x30 [ 18.871699] x64_sys_call+0x9e2/0x2670 [ 18.871979] do_syscall_64+0x87/0x150 [ 18.873280] ? do_syscall_64+0x93/0x150 [ 18.874742] ? lock_release+0x7b/0x160 [ 18.876157] ? do_user_addr_fault+0x5ce/0x8f0 [ 18.877833] ? irqentry_exit_to_user_mode+0xc2/0x210 [ 18.879608] ? irqentry_exit+0x77/0xb0 [ 18.879808] ? clear_bhb_loop+0x15/0x70 [ 18.880023] ? clear_bhb_loop+0x15/0x70 [ 18.880223] ? clear_bhb_loop+0x15/0x70 [ 18.880426] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 18.880683] RIP: 0033:0x44a957 [ 18.880851] Code: ff ff e8 fc 00 00 00 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 8974 24 10 [ 18.881766] RSP: 002b:00007ffcdd00fad8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 18.882149] RAX: ffffffffffffffda RBX: 00007ffcdd010db8 RCX: 000000000044a957 [ 18.882507] RDX: 0000000000000000 RSI: 00007ffcdd00fb70 RDI: 0000000000000003 [ 18.885037] RBP: 00007ffcdd010bc0 R08: 000000000703c770 R09: 000000000703c7c0 [ 18.887203] R10: 0000000000000080 R11: 0000000000000246 R12: 0000000000000001 [ 18.888026] R13: 00007ffcdd010da8 R14: 00000000004ca7d0 R15: 0000000000000001 [ 18.888395] </TASK> [ 18.888610] ---[ end trace ]--- Fixes: dcc68b4 ("net: sch_ets: Add a new Qdisc") Reported-by: Haowei Yan <[email protected]> Suggested-by: Haowei Yan <[email protected]> Signed-off-by: Jamal Hadi Salim <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Reviewed-by: Petr Machata <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit ee1b504 upstream. The following kernel oops is thrown when trying to remove the max96712 module: Unable to handle kernel paging request at virtual address 00007375746174db Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000010af89000 [00007375746174db] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [ChimeraOS#1] PREEMPT SMP Modules linked in: crct10dif_ce polyval_ce mxc_jpeg_encdec flexcan snd_soc_fsl_sai snd_soc_fsl_asoc_card snd_soc_fsl_micfil dwc_mipi_csi2 imx_csi_formatter polyval_generic v4l2_jpeg imx_pcm_dma can_dev snd_soc_imx_audmux snd_soc_wm8962 snd_soc_imx_card snd_soc_fsl_utils max96712(C-) rpmsg_ctrl rpmsg_char pwm_fan fuse [last unloaded: imx8_isi] CPU: 0 UID: 0 PID: 754 Comm: rmmod Tainted: G C 6.12.0-rc6-06364-g327fec852c31 ChimeraOS#17 Tainted: [C]=CRAP Hardware name: NXP i.MX95 19X19 board (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : led_put+0x1c/0x40 lr : v4l2_subdev_put_privacy_led+0x48/0x58 sp : ffff80008699bbb0 x29: ffff80008699bbb0 x28: ffff00008ac233c0 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 x23: ffff000080cf1170 x22: ffff00008b53bd00 x21: ffff8000822ad1c8 x20: ffff000080ff5c00 x19: ffff00008b53be40 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000004 x13: ffff0000800f8010 x12: 0000000000000000 x11: ffff000082acf5c0 x10: ffff000082acf478 x9 : ffff0000800f8010 x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff6364626d x5 : 8080808000000000 x4 : 0000000000000020 x3 : 00000000553a3dc1 x2 : ffff00008ac233c0 x1 : ffff00008ac233c0 x0 : ff00737574617473 Call trace: led_put+0x1c/0x40 v4l2_subdev_put_privacy_led+0x48/0x58 v4l2_async_unregister_subdev+0x2c/0x1a4 max96712_remove+0x1c/0x38 [max96712] i2c_device_remove+0x2c/0x9c device_remove+0x4c/0x80 device_release_driver_internal+0x1cc/0x228 driver_detach+0x4c/0x98 bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 i2c_del_driver+0x54/0x64 max96712_i2c_driver_exit+0x18/0x1d0 [max96712] __arm64_sys_delete_module+0x1a4/0x290 invoke_syscall+0x48/0x10c el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xd8 el0t_64_sync_handler+0x120/0x12c el0t_64_sync+0x190/0x194 Code: f9000bf3 aa0003f3 f9402800 f9402000 (f9403400) ---[ end trace 0000000000000000 ]--- This happens because in v4l2_i2c_subdev_init(), the i2c_set_cliendata() is called again and the data is overwritten to point to sd, instead of priv. So, in remove(), the wrong pointer is passed to v4l2_async_unregister_subdev(), leading to a crash. Fixes: 5814f32 ("media: staging: max96712: Add basic support for MAX96712 GMSL2 deserializer") Signed-off-by: Laurentiu Palcu <[email protected]> Cc: [email protected] Reviewed-by: Niklas Söderlund <[email protected]> Reviewed-by: Ricardo Ribalda <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit d62b04f upstream. Haowei Yan <[email protected]> found that ets_class_from_arg() can index an Out-Of-Bound class in ets_class_from_arg() when passed clid of 0. The overflow may cause local privilege escalation. [ 18.852298] ------------[ cut here ]------------ [ 18.853271] UBSAN: array-index-out-of-bounds in net/sched/sch_ets.c:93:20 [ 18.853743] index 18446744073709551615 is out of range for type 'ets_class [16]' [ 18.854254] CPU: 0 UID: 0 PID: 1275 Comm: poc Not tainted 6.12.6-dirty ChimeraOS#17 [ 18.854821] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [ 18.856532] Call Trace: [ 18.857441] <TASK> [ 18.858227] dump_stack_lvl+0xc2/0xf0 [ 18.859607] dump_stack+0x10/0x20 [ 18.860908] __ubsan_handle_out_of_bounds+0xa7/0xf0 [ 18.864022] ets_class_change+0x3d6/0x3f0 [ 18.864322] tc_ctl_tclass+0x251/0x910 [ 18.864587] ? lock_acquire+0x5e/0x140 [ 18.865113] ? __mutex_lock+0x9c/0xe70 [ 18.866009] ? __mutex_lock+0xa34/0xe70 [ 18.866401] rtnetlink_rcv_msg+0x170/0x6f0 [ 18.866806] ? __lock_acquire+0x578/0xc10 [ 18.867184] ? __pfx_rtnetlink_rcv_msg+0x10/0x10 [ 18.867503] netlink_rcv_skb+0x59/0x110 [ 18.867776] rtnetlink_rcv+0x15/0x30 [ 18.868159] netlink_unicast+0x1c3/0x2b0 [ 18.868440] netlink_sendmsg+0x239/0x4b0 [ 18.868721] ____sys_sendmsg+0x3e2/0x410 [ 18.869012] ___sys_sendmsg+0x88/0xe0 [ 18.869276] ? rseq_ip_fixup+0x198/0x260 [ 18.869563] ? rseq_update_cpu_node_id+0x10a/0x190 [ 18.869900] ? trace_hardirqs_off+0x5a/0xd0 [ 18.870196] ? syscall_exit_to_user_mode+0xcc/0x220 [ 18.870547] ? do_syscall_64+0x93/0x150 [ 18.870821] ? __memcg_slab_free_hook+0x69/0x290 [ 18.871157] __sys_sendmsg+0x69/0xd0 [ 18.871416] __x64_sys_sendmsg+0x1d/0x30 [ 18.871699] x64_sys_call+0x9e2/0x2670 [ 18.871979] do_syscall_64+0x87/0x150 [ 18.873280] ? do_syscall_64+0x93/0x150 [ 18.874742] ? lock_release+0x7b/0x160 [ 18.876157] ? do_user_addr_fault+0x5ce/0x8f0 [ 18.877833] ? irqentry_exit_to_user_mode+0xc2/0x210 [ 18.879608] ? irqentry_exit+0x77/0xb0 [ 18.879808] ? clear_bhb_loop+0x15/0x70 [ 18.880023] ? clear_bhb_loop+0x15/0x70 [ 18.880223] ? clear_bhb_loop+0x15/0x70 [ 18.880426] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 18.880683] RIP: 0033:0x44a957 [ 18.880851] Code: ff ff e8 fc 00 00 00 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 8974 24 10 [ 18.881766] RSP: 002b:00007ffcdd00fad8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 18.882149] RAX: ffffffffffffffda RBX: 00007ffcdd010db8 RCX: 000000000044a957 [ 18.882507] RDX: 0000000000000000 RSI: 00007ffcdd00fb70 RDI: 0000000000000003 [ 18.885037] RBP: 00007ffcdd010bc0 R08: 000000000703c770 R09: 000000000703c7c0 [ 18.887203] R10: 0000000000000080 R11: 0000000000000246 R12: 0000000000000001 [ 18.888026] R13: 00007ffcdd010da8 R14: 00000000004ca7d0 R15: 0000000000000001 [ 18.888395] </TASK> [ 18.888610] ---[ end trace ]--- Fixes: dcc68b4 ("net: sch_ets: Add a new Qdisc") Reported-by: Haowei Yan <[email protected]> Suggested-by: Haowei Yan <[email protected]> Signed-off-by: Jamal Hadi Salim <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Reviewed-by: Petr Machata <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit ee1b504 upstream. The following kernel oops is thrown when trying to remove the max96712 module: Unable to handle kernel paging request at virtual address 00007375746174db Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000010af89000 [00007375746174db] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [ChimeraOS#1] PREEMPT SMP Modules linked in: crct10dif_ce polyval_ce mxc_jpeg_encdec flexcan snd_soc_fsl_sai snd_soc_fsl_asoc_card snd_soc_fsl_micfil dwc_mipi_csi2 imx_csi_formatter polyval_generic v4l2_jpeg imx_pcm_dma can_dev snd_soc_imx_audmux snd_soc_wm8962 snd_soc_imx_card snd_soc_fsl_utils max96712(C-) rpmsg_ctrl rpmsg_char pwm_fan fuse [last unloaded: imx8_isi] CPU: 0 UID: 0 PID: 754 Comm: rmmod Tainted: G C 6.12.0-rc6-06364-g327fec852c31 ChimeraOS#17 Tainted: [C]=CRAP Hardware name: NXP i.MX95 19X19 board (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : led_put+0x1c/0x40 lr : v4l2_subdev_put_privacy_led+0x48/0x58 sp : ffff80008699bbb0 x29: ffff80008699bbb0 x28: ffff00008ac233c0 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 x23: ffff000080cf1170 x22: ffff00008b53bd00 x21: ffff8000822ad1c8 x20: ffff000080ff5c00 x19: ffff00008b53be40 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000004 x13: ffff0000800f8010 x12: 0000000000000000 x11: ffff000082acf5c0 x10: ffff000082acf478 x9 : ffff0000800f8010 x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff6364626d x5 : 8080808000000000 x4 : 0000000000000020 x3 : 00000000553a3dc1 x2 : ffff00008ac233c0 x1 : ffff00008ac233c0 x0 : ff00737574617473 Call trace: led_put+0x1c/0x40 v4l2_subdev_put_privacy_led+0x48/0x58 v4l2_async_unregister_subdev+0x2c/0x1a4 max96712_remove+0x1c/0x38 [max96712] i2c_device_remove+0x2c/0x9c device_remove+0x4c/0x80 device_release_driver_internal+0x1cc/0x228 driver_detach+0x4c/0x98 bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 i2c_del_driver+0x54/0x64 max96712_i2c_driver_exit+0x18/0x1d0 [max96712] __arm64_sys_delete_module+0x1a4/0x290 invoke_syscall+0x48/0x10c el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xd8 el0t_64_sync_handler+0x120/0x12c el0t_64_sync+0x190/0x194 Code: f9000bf3 aa0003f3 f9402800 f9402000 (f9403400) ---[ end trace 0000000000000000 ]--- This happens because in v4l2_i2c_subdev_init(), the i2c_set_cliendata() is called again and the data is overwritten to point to sd, instead of priv. So, in remove(), the wrong pointer is passed to v4l2_async_unregister_subdev(), leading to a crash. Fixes: 5814f32 ("media: staging: max96712: Add basic support for MAX96712 GMSL2 deserializer") Signed-off-by: Laurentiu Palcu <[email protected]> Cc: [email protected] Reviewed-by: Niklas Söderlund <[email protected]> Reviewed-by: Ricardo Ribalda <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…O write After commit ac325fc ("btrfs: do not hold the extent lock for entire read") we can now trigger a race between a task doing a direct IO write and readahead. When this race is triggered it results in tasks getting stale data when they attempt do a buffered read (including the task that did the direct IO write). This race can be sporadically triggered with test case generic/418, failing like this: $ ./check generic/418 FSTYP -- btrfs PLATFORM -- Linux/x86_64 debian0 6.13.0-rc7-btrfs-next-185+ ChimeraOS#17 SMP PREEMPT_DYNAMIC Mon Feb 3 12:28:46 WET 2025 MKFS_OPTIONS -- /dev/sdc MOUNT_OPTIONS -- /dev/sdc /home/fdmanana/btrfs-tests/scratch_1 generic/418 14s ... - output mismatch (see /home/fdmanana/git/hub/xfstests/results//generic/418.out.bad) --- tests/generic/418.out 2020-06-10 19:29:03.850519863 +0100 +++ /home/fdmanana/git/hub/xfstests/results//generic/418.out.bad 2025-02-03 15:42:36.974609476 +0000 @@ -1,2 +1,5 @@ QA output created by 418 +cmpbuf: offset 0: Expected: 0x1, got 0x0 +[6:0] FAIL - comparison failed, offset 24576 +diotest -wp -b 4096 -n 8 -i 4 failed at loop 3 Silence is golden ... (Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/generic/418.out /home/fdmanana/git/hub/xfstests/results//generic/418.out.bad' to see the entire diff) Ran: generic/418 Failures: generic/418 Failed 1 of 1 tests The race happens like this: 1) A file has a prealloc extent for the range [16K, 28K); 2) Task A starts a direct IO write against file range [24K, 28K). At the start of the direct IO write it invalidates the page cache at __iomap_dio_rw() with kiocb_invalidate_pages() for the 4K page at file offset 24K; 3) Task A enters btrfs_dio_iomap_begin() and locks the extent range [24K, 28K); 4) Task B starts a readahead for file range [16K, 28K), entering btrfs_readahead(). First it attempts to read the page at offset 16K by entering btrfs_do_readpage(), where it calls get_extent_map(), locks the range [16K, 20K) and gets the extent map for the range [16K, 28K), caching it into the 'em_cached' variable declared in the local stack of btrfs_readahead(), and then unlocks the range [16K, 20K). Since the extent map has the prealloc flag, at btrfs_do_readpage() we zero out the page's content and don't submit any bio to read the page from the extent. Then it attempts to read the page at offset 20K entering btrfs_do_readpage() where we reuse the previously cached extent map (decided by get_extent_map()) since it spans the page's range and it's still in the inode's extent map tree. Just like for the previous page, we zero out the page's content since the extent map has the prealloc flag set. Then it attempts to read the page at offset 24K entering btrfs_do_readpage() where we reuse the previously cached extent map (decided by get_extent_map()) since it spans the page's range and it's still in the inode's extent map tree. Just like for the previous pages, we zero out the page's content since the extent map has the prealloc flag set. Note that we didn't lock the extent range [24K, 28K), so we didn't synchronize with the ongoing direct IO write being performed by task A; 5) Task A enters btrfs_create_dio_extent() and creates an ordered extent for the range [24K, 28K), with the flags BTRFS_ORDERED_DIRECT and BTRFS_ORDERED_PREALLOC set; 6) Task A unlocks the range [24K, 28K) at btrfs_dio_iomap_begin(); 7) The ordered extent enters btrfs_finish_one_ordered() and locks the range [24K, 28K); 8) Task A enters fs/iomap/direct-io.c:iomap_dio_complete() and it tries to invalidate the page at offset 24K by calling kiocb_invalidate_post_direct_write(), resulting in a call chain that ends up at btrfs_release_folio(). The btrfs_release_folio() call ends up returning false because the range for the page at file offset 24K is currently locked by the task doing the ordered extent completion in the previous step (7), so we have: btrfs_release_folio() -> __btrfs_release_folio() -> try_release_extent_mapping() -> try_release_extent_state() This last function checking that the range is locked and returning false and propagating it up to btrfs_release_folio(). So this results in a failure to invalidate the page and kiocb_invalidate_post_direct_write() triggers this message logged in dmesg: Page cache invalidation failure on direct I/O. Possible data corruption due to collision with buffered I/O! After this we leave the page cache with stale data for the file range [24K, 28K), filled with zeroes instead of the data written by direct IO write (all bytes with a 0x01 value), so any task attempting to read with buffered IO, including the task that did the direct IO write, will get all bytes in the range with a 0x00 value instead of the written data. Fix this by locking the range, with btrfs_lock_and_flush_ordered_range(), at the two callers of btrfs_do_readpage() instead of doing it at get_extent_map(), just like we did before commit ac325fc ("btrfs: do not hold the extent lock for entire read"), and unlocking the range after all the calls to btrfs_do_readpage(). This way we never reuse a cached extent map without flushing any pending ordered extents from a concurrent direct IO write. Fixes: ac325fc ("btrfs: do not hold the extent lock for entire read") Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>

At btrfs_write_check() if our file's i_size is not sector size aligned and we have a write that starts at an offset larger than the i_size that falls within the same page of the i_size, then we end up not zeroing the file range [i_size, write_offset). The code is this: start_pos = round_down(pos, fs_info->sectorsize); oldsize = i_size_read(inode); if (start_pos > oldsize) { /* Expand hole size to cover write data, preventing empty gap */ loff_t end_pos = round_up(pos + count, fs_info->sectorsize); ret = btrfs_cont_expand(BTRFS_I(inode), oldsize, end_pos); if (ret) return ret; } So if our file's i_size is 90269 bytes and a write at offset 90365 bytes comes in, we get 'start_pos' set to 90112 bytes, which is less than the i_size and therefore we don't zero out the range [90269, 90365) by calling btrfs_cont_expand(). This is an old bug introduced in commit 9036c10 ("Btrfs: update hole handling v2"), from 2008, and the buggy code got moved around over the years. Fix this by discarding 'start_pos' and comparing against the write offset ('pos') without any alignment. This bug was recently exposed by test case generic/363 which tests this scenario by polluting ranges beyond EOF with an mmap write and than verify that after a file increases we get zeroes for the range which is supposed to be a hole and not what we wrote with the previous mmaped write. We're only seeing this exposed now because generic/363 used to run only on xfs until last Sunday's fstests update. The test was failing like this: $ ./check generic/363 FSTYP -- btrfs PLATFORM -- Linux/x86_64 debian0 6.13.0-rc7-btrfs-next-185+ ChimeraOS#17 SMP PREEMPT_DYNAMIC Mon Feb 3 12:28:46 WET 2025 MKFS_OPTIONS -- /dev/sdc MOUNT_OPTIONS -- /dev/sdc /home/fdmanana/btrfs-tests/scratch_1 generic/363 0s ... [failed, exit status 1]- output mismatch (see /home/fdmanana/git/hub/xfstests/results//generic/363.out.bad) --- tests/generic/363.out 2025-02-05 15:31:14.013646509 +0000 +++ /home/fdmanana/git/hub/xfstests/results//generic/363.out.bad 2025-02-05 17:25:33.112630781 +0000 @@ -1 +1,46 @@ QA output created by 363 +READ BAD DATA: offset = 0xdcad, size = 0xd921, fname = /home/fdmanana/btrfs-tests/dev/junk +OFFSET GOOD BAD RANGE +0x1609d 0x0000 0x3104 0x0 +operation# (mod 256) for the bad data may be 4 +0x1609e 0x0000 0x0472 0x1 +operation# (mod 256) for the bad data may be 4 ... (Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/generic/363.out /home/fdmanana/git/hub/xfstests/results//generic/363.out.bad' to see the entire diff) Ran: generic/363 Failures: generic/363 Failed 1 of 1 tests Fixes: 9036c10 ("Btrfs: update hole handling v2") CC: [email protected] Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>

commit da2dccd upstream. At btrfs_write_check() if our file's i_size is not sector size aligned and we have a write that starts at an offset larger than the i_size that falls within the same page of the i_size, then we end up not zeroing the file range [i_size, write_offset). The code is this: start_pos = round_down(pos, fs_info->sectorsize); oldsize = i_size_read(inode); if (start_pos > oldsize) { /* Expand hole size to cover write data, preventing empty gap */ loff_t end_pos = round_up(pos + count, fs_info->sectorsize); ret = btrfs_cont_expand(BTRFS_I(inode), oldsize, end_pos); if (ret) return ret; } So if our file's i_size is 90269 bytes and a write at offset 90365 bytes comes in, we get 'start_pos' set to 90112 bytes, which is less than the i_size and therefore we don't zero out the range [90269, 90365) by calling btrfs_cont_expand(). This is an old bug introduced in commit 9036c10 ("Btrfs: update hole handling v2"), from 2008, and the buggy code got moved around over the years. Fix this by discarding 'start_pos' and comparing against the write offset ('pos') without any alignment. This bug was recently exposed by test case generic/363 which tests this scenario by polluting ranges beyond EOF with an mmap write and than verify that after a file increases we get zeroes for the range which is supposed to be a hole and not what we wrote with the previous mmaped write. We're only seeing this exposed now because generic/363 used to run only on xfs until last Sunday's fstests update. The test was failing like this: $ ./check generic/363 FSTYP -- btrfs PLATFORM -- Linux/x86_64 debian0 6.13.0-rc7-btrfs-next-185+ ChimeraOS#17 SMP PREEMPT_DYNAMIC Mon Feb 3 12:28:46 WET 2025 MKFS_OPTIONS -- /dev/sdc MOUNT_OPTIONS -- /dev/sdc /home/fdmanana/btrfs-tests/scratch_1 generic/363 0s ... [failed, exit status 1]- output mismatch (see /home/fdmanana/git/hub/xfstests/results//generic/363.out.bad) # --- tests/generic/363.out 2025-02-05 15:31:14.013646509 +0000 # +++ /home/fdmanana/git/hub/xfstests/results//generic/363.out.bad 2025-02-05 17:25:33.112630781 +0000 @@ -1 +1,46 @@ QA output created by 363 +READ BAD DATA: offset = 0xdcad, size = 0xd921, fname = /home/fdmanana/btrfs-tests/dev/junk +OFFSET GOOD BAD RANGE +0x1609d 0x0000 0x3104 0x0 +operation# (mod 256) for the bad data may be 4 +0x1609e 0x0000 0x0472 0x1 +operation# (mod 256) for the bad data may be 4 ... (Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/generic/363.out /home/fdmanana/git/hub/xfstests/results//generic/363.out.bad' to see the entire diff) Ran: generic/363 Failures: generic/363 Failed 1 of 1 tests Fixes: 9036c10 ("Btrfs: update hole handling v2") CC: [email protected] Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…O write [ Upstream commit acc18e1 ] After commit ac325fc ("btrfs: do not hold the extent lock for entire read") we can now trigger a race between a task doing a direct IO write and readahead. When this race is triggered it results in tasks getting stale data when they attempt do a buffered read (including the task that did the direct IO write). This race can be sporadically triggered with test case generic/418, failing like this: $ ./check generic/418 FSTYP -- btrfs PLATFORM -- Linux/x86_64 debian0 6.13.0-rc7-btrfs-next-185+ ChimeraOS#17 SMP PREEMPT_DYNAMIC Mon Feb 3 12:28:46 WET 2025 MKFS_OPTIONS -- /dev/sdc MOUNT_OPTIONS -- /dev/sdc /home/fdmanana/btrfs-tests/scratch_1 generic/418 14s ... - output mismatch (see /home/fdmanana/git/hub/xfstests/results//generic/418.out.bad) # --- tests/generic/418.out 2020-06-10 19:29:03.850519863 +0100 # +++ /home/fdmanana/git/hub/xfstests/results//generic/418.out.bad 2025-02-03 15:42:36.974609476 +0000 @@ -1,2 +1,5 @@ QA output created by 418 +cmpbuf: offset 0: Expected: 0x1, got 0x0 +[6:0] FAIL - comparison failed, offset 24576 +diotest -wp -b 4096 -n 8 -i 4 failed at loop 3 Silence is golden ... (Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/generic/418.out /home/fdmanana/git/hub/xfstests/results//generic/418.out.bad' to see the entire diff) Ran: generic/418 Failures: generic/418 Failed 1 of 1 tests The race happens like this: 1) A file has a prealloc extent for the range [16K, 28K); 2) Task A starts a direct IO write against file range [24K, 28K). At the start of the direct IO write it invalidates the page cache at __iomap_dio_rw() with kiocb_invalidate_pages() for the 4K page at file offset 24K; 3) Task A enters btrfs_dio_iomap_begin() and locks the extent range [24K, 28K); 4) Task B starts a readahead for file range [16K, 28K), entering btrfs_readahead(). First it attempts to read the page at offset 16K by entering btrfs_do_readpage(), where it calls get_extent_map(), locks the range [16K, 20K) and gets the extent map for the range [16K, 28K), caching it into the 'em_cached' variable declared in the local stack of btrfs_readahead(), and then unlocks the range [16K, 20K). Since the extent map has the prealloc flag, at btrfs_do_readpage() we zero out the page's content and don't submit any bio to read the page from the extent. Then it attempts to read the page at offset 20K entering btrfs_do_readpage() where we reuse the previously cached extent map (decided by get_extent_map()) since it spans the page's range and it's still in the inode's extent map tree. Just like for the previous page, we zero out the page's content since the extent map has the prealloc flag set. Then it attempts to read the page at offset 24K entering btrfs_do_readpage() where we reuse the previously cached extent map (decided by get_extent_map()) since it spans the page's range and it's still in the inode's extent map tree. Just like for the previous pages, we zero out the page's content since the extent map has the prealloc flag set. Note that we didn't lock the extent range [24K, 28K), so we didn't synchronize with the ongoing direct IO write being performed by task A; 5) Task A enters btrfs_create_dio_extent() and creates an ordered extent for the range [24K, 28K), with the flags BTRFS_ORDERED_DIRECT and BTRFS_ORDERED_PREALLOC set; 6) Task A unlocks the range [24K, 28K) at btrfs_dio_iomap_begin(); 7) The ordered extent enters btrfs_finish_one_ordered() and locks the range [24K, 28K); 8) Task A enters fs/iomap/direct-io.c:iomap_dio_complete() and it tries to invalidate the page at offset 24K by calling kiocb_invalidate_post_direct_write(), resulting in a call chain that ends up at btrfs_release_folio(). The btrfs_release_folio() call ends up returning false because the range for the page at file offset 24K is currently locked by the task doing the ordered extent completion in the previous step (7), so we have: btrfs_release_folio() -> __btrfs_release_folio() -> try_release_extent_mapping() -> try_release_extent_state() This last function checking that the range is locked and returning false and propagating it up to btrfs_release_folio(). So this results in a failure to invalidate the page and kiocb_invalidate_post_direct_write() triggers this message logged in dmesg: Page cache invalidation failure on direct I/O. Possible data corruption due to collision with buffered I/O! After this we leave the page cache with stale data for the file range [24K, 28K), filled with zeroes instead of the data written by direct IO write (all bytes with a 0x01 value), so any task attempting to read with buffered IO, including the task that did the direct IO write, will get all bytes in the range with a 0x00 value instead of the written data. Fix this by locking the range, with btrfs_lock_and_flush_ordered_range(), at the two callers of btrfs_do_readpage() instead of doing it at get_extent_map(), just like we did before commit ac325fc ("btrfs: do not hold the extent lock for entire read"), and unlocking the range after all the calls to btrfs_do_readpage(). This way we never reuse a cached extent map without flushing any pending ordered extents from a concurrent direct IO write. Fixes: ac325fc ("btrfs: do not hold the extent lock for entire read") Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit da2dccd upstream. At btrfs_write_check() if our file's i_size is not sector size aligned and we have a write that starts at an offset larger than the i_size that falls within the same page of the i_size, then we end up not zeroing the file range [i_size, write_offset). The code is this: start_pos = round_down(pos, fs_info->sectorsize); oldsize = i_size_read(inode); if (start_pos > oldsize) { /* Expand hole size to cover write data, preventing empty gap */ loff_t end_pos = round_up(pos + count, fs_info->sectorsize); ret = btrfs_cont_expand(BTRFS_I(inode), oldsize, end_pos); if (ret) return ret; } So if our file's i_size is 90269 bytes and a write at offset 90365 bytes comes in, we get 'start_pos' set to 90112 bytes, which is less than the i_size and therefore we don't zero out the range [90269, 90365) by calling btrfs_cont_expand(). This is an old bug introduced in commit 9036c10 ("Btrfs: update hole handling v2"), from 2008, and the buggy code got moved around over the years. Fix this by discarding 'start_pos' and comparing against the write offset ('pos') without any alignment. This bug was recently exposed by test case generic/363 which tests this scenario by polluting ranges beyond EOF with an mmap write and than verify that after a file increases we get zeroes for the range which is supposed to be a hole and not what we wrote with the previous mmaped write. We're only seeing this exposed now because generic/363 used to run only on xfs until last Sunday's fstests update. The test was failing like this: $ ./check generic/363 FSTYP -- btrfs PLATFORM -- Linux/x86_64 debian0 6.13.0-rc7-btrfs-next-185+ ChimeraOS#17 SMP PREEMPT_DYNAMIC Mon Feb 3 12:28:46 WET 2025 MKFS_OPTIONS -- /dev/sdc MOUNT_OPTIONS -- /dev/sdc /home/fdmanana/btrfs-tests/scratch_1 generic/363 0s ... [failed, exit status 1]- output mismatch (see /home/fdmanana/git/hub/xfstests/results//generic/363.out.bad) # --- tests/generic/363.out 2025-02-05 15:31:14.013646509 +0000 # +++ /home/fdmanana/git/hub/xfstests/results//generic/363.out.bad 2025-02-05 17:25:33.112630781 +0000 @@ -1 +1,46 @@ QA output created by 363 +READ BAD DATA: offset = 0xdcad, size = 0xd921, fname = /home/fdmanana/btrfs-tests/dev/junk +OFFSET GOOD BAD RANGE +0x1609d 0x0000 0x3104 0x0 +operation# (mod 256) for the bad data may be 4 +0x1609e 0x0000 0x0472 0x1 +operation# (mod 256) for the bad data may be 4 ... (Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/generic/363.out /home/fdmanana/git/hub/xfstests/results//generic/363.out.bad' to see the entire diff) Ran: generic/363 Failures: generic/363 Failed 1 of 1 tests Fixes: 9036c10 ("Btrfs: update hole handling v2") CC: [email protected] Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…O write [ Upstream commit acc18e1 ] After commit ac325fc ("btrfs: do not hold the extent lock for entire read") we can now trigger a race between a task doing a direct IO write and readahead. When this race is triggered it results in tasks getting stale data when they attempt do a buffered read (including the task that did the direct IO write). This race can be sporadically triggered with test case generic/418, failing like this: $ ./check generic/418 FSTYP -- btrfs PLATFORM -- Linux/x86_64 debian0 6.13.0-rc7-btrfs-next-185+ ChimeraOS#17 SMP PREEMPT_DYNAMIC Mon Feb 3 12:28:46 WET 2025 MKFS_OPTIONS -- /dev/sdc MOUNT_OPTIONS -- /dev/sdc /home/fdmanana/btrfs-tests/scratch_1 generic/418 14s ... - output mismatch (see /home/fdmanana/git/hub/xfstests/results//generic/418.out.bad) # --- tests/generic/418.out 2020-06-10 19:29:03.850519863 +0100 # +++ /home/fdmanana/git/hub/xfstests/results//generic/418.out.bad 2025-02-03 15:42:36.974609476 +0000 @@ -1,2 +1,5 @@ QA output created by 418 +cmpbuf: offset 0: Expected: 0x1, got 0x0 +[6:0] FAIL - comparison failed, offset 24576 +diotest -wp -b 4096 -n 8 -i 4 failed at loop 3 Silence is golden ... (Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/generic/418.out /home/fdmanana/git/hub/xfstests/results//generic/418.out.bad' to see the entire diff) Ran: generic/418 Failures: generic/418 Failed 1 of 1 tests The race happens like this: 1) A file has a prealloc extent for the range [16K, 28K); 2) Task A starts a direct IO write against file range [24K, 28K). At the start of the direct IO write it invalidates the page cache at __iomap_dio_rw() with kiocb_invalidate_pages() for the 4K page at file offset 24K; 3) Task A enters btrfs_dio_iomap_begin() and locks the extent range [24K, 28K); 4) Task B starts a readahead for file range [16K, 28K), entering btrfs_readahead(). First it attempts to read the page at offset 16K by entering btrfs_do_readpage(), where it calls get_extent_map(), locks the range [16K, 20K) and gets the extent map for the range [16K, 28K), caching it into the 'em_cached' variable declared in the local stack of btrfs_readahead(), and then unlocks the range [16K, 20K). Since the extent map has the prealloc flag, at btrfs_do_readpage() we zero out the page's content and don't submit any bio to read the page from the extent. Then it attempts to read the page at offset 20K entering btrfs_do_readpage() where we reuse the previously cached extent map (decided by get_extent_map()) since it spans the page's range and it's still in the inode's extent map tree. Just like for the previous page, we zero out the page's content since the extent map has the prealloc flag set. Then it attempts to read the page at offset 24K entering btrfs_do_readpage() where we reuse the previously cached extent map (decided by get_extent_map()) since it spans the page's range and it's still in the inode's extent map tree. Just like for the previous pages, we zero out the page's content since the extent map has the prealloc flag set. Note that we didn't lock the extent range [24K, 28K), so we didn't synchronize with the ongoing direct IO write being performed by task A; 5) Task A enters btrfs_create_dio_extent() and creates an ordered extent for the range [24K, 28K), with the flags BTRFS_ORDERED_DIRECT and BTRFS_ORDERED_PREALLOC set; 6) Task A unlocks the range [24K, 28K) at btrfs_dio_iomap_begin(); 7) The ordered extent enters btrfs_finish_one_ordered() and locks the range [24K, 28K); 8) Task A enters fs/iomap/direct-io.c:iomap_dio_complete() and it tries to invalidate the page at offset 24K by calling kiocb_invalidate_post_direct_write(), resulting in a call chain that ends up at btrfs_release_folio(). The btrfs_release_folio() call ends up returning false because the range for the page at file offset 24K is currently locked by the task doing the ordered extent completion in the previous step (7), so we have: btrfs_release_folio() -> __btrfs_release_folio() -> try_release_extent_mapping() -> try_release_extent_state() This last function checking that the range is locked and returning false and propagating it up to btrfs_release_folio(). So this results in a failure to invalidate the page and kiocb_invalidate_post_direct_write() triggers this message logged in dmesg: Page cache invalidation failure on direct I/O. Possible data corruption due to collision with buffered I/O! After this we leave the page cache with stale data for the file range [24K, 28K), filled with zeroes instead of the data written by direct IO write (all bytes with a 0x01 value), so any task attempting to read with buffered IO, including the task that did the direct IO write, will get all bytes in the range with a 0x00 value instead of the written data. Fix this by locking the range, with btrfs_lock_and_flush_ordered_range(), at the two callers of btrfs_do_readpage() instead of doing it at get_extent_map(), just like we did before commit ac325fc ("btrfs: do not hold the extent lock for entire read"), and unlocking the range after all the calls to btrfs_do_readpage(). This way we never reuse a cached extent map without flushing any pending ordered extents from a concurrent direct IO write. Fixes: ac325fc ("btrfs: do not hold the extent lock for entire read") Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 88f7f56 ] When a bio with REQ_PREFLUSH is submitted to dm, __send_empty_flush() generates a flush_bio with REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC, which causes the flush_bio to be throttled by wbt_wait(). An example from v5.4, similar problem also exists in upstream: crash> bt 2091206 PID: 2091206 TASK: ffff2050df92a300 CPU: 109 COMMAND: "kworker/u260:0" #0 [ffff800084a2f7f0] __switch_to at ffff80004008aeb8 #1 [ffff800084a2f820] __schedule at ffff800040bfa0c4 #2 [ffff800084a2f880] schedule at ffff800040bfa4b4 #3 [ffff800084a2f8a0] io_schedule at ffff800040bfa9c4 #4 [ffff800084a2f8c0] rq_qos_wait at ffff8000405925bc #5 [ffff800084a2f940] wbt_wait at ffff8000405bb3a0 #6 [ffff800084a2f9a0] __rq_qos_throttle at ffff800040592254 #7 [ffff800084a2f9c0] blk_mq_make_request at ffff80004057cf38 #8 [ffff800084a2fa60] generic_make_request at ffff800040570138 #9 [ffff800084a2fae0] submit_bio at ffff8000405703b4 #10 [ffff800084a2fb50] xlog_write_iclog at ffff800001280834 [xfs] #11 [ffff800084a2fbb0] xlog_sync at ffff800001280c3c [xfs] #12 [ffff800084a2fbf0] xlog_state_release_iclog at ffff800001280df4 [xfs] #13 [ffff800084a2fc10] xlog_write at ffff80000128203c [xfs] #14 [ffff800084a2fcd0] xlog_cil_push at ffff8000012846dc [xfs] #15 [ffff800084a2fda0] xlog_cil_push_work at ffff800001284a2c [xfs] #16 [ffff800084a2fdb0] process_one_work at ffff800040111d08 #17 [ffff800084a2fe00] worker_thread at ffff8000401121cc #18 [ffff800084a2fe70] kthread at ffff800040118de4 After commit 2def284 ("xfs: don't allow log IO to be throttled"), the metadata submitted by xlog_write_iclog() should not be throttled. But due to the existence of the dm layer, throttling flush_bio indirectly causes the metadata bio to be throttled. Fix this by conditionally adding REQ_IDLE to flush_bio.bi_opf, which makes wbt_should_throttle() return false to avoid wbt_wait(). Signed-off-by: Jinliang Zheng <[email protected]> Reviewed-by: Tianxiang Peng <[email protected]> Reviewed-by: Hao Peng <[email protected]> Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

superm1 and others added 5 commits August 28, 2024 11:50

Linux v6.9.12-chos9

3317dde

Merge branch '6.9/chimeraos' into 6.9/chimeraos

08952ed

NeroReflex merged commit 41a9a35 into ChimeraOS:6.9/chimeraos Aug 28, 2024

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

6.9/chimeraos #17

6.9/chimeraos #17

Uh oh!

flukejones commented Aug 28, 2024

Uh oh!

Uh oh!

6.9/chimeraos #17

6.9/chimeraos #17

Uh oh!

Conversation

flukejones commented Aug 28, 2024

Uh oh!

Uh oh!