…em (#1508)

Includes verification script (for Travis) that CMakeLists.txt contents match
repo & submodule source files

* fix sdmmc config

* Fix warnings in EEPROM

from @Curclamas

* remove leftover TAG in EEPROM

* Initial add of @stickbreaker i2c

* Add log_n

* fix warnings when log is off

* i2c code clean up and reorganization

* add flags to interrupt allocator

* fix sdmmc config

* Fix warnings in EEPROM

from @Curclamas

* remove leftover TAG in EEPROM

* fix errors with latest IDF

* fix debug optimization (#1365)

incorrect optimization for debugging tick markers.

* Fix some missing BT header

* Change BTSerial log calls

* Update BLE lib

* Arduino-ESP32 release management scripted (#1515)

* Calculate an absolute path for a custom partitions table (#1452)

* * Arduino-ESP32 release management scripted
(ready-to-merge)

* * secure env for espressif/arduino-esp32

* * build tests enabled
* gitter webhook enabled

* * gitter room link fixed
* better comment

* * filepaths fixed

* BT Serial adjustments

* * don't run sketch builds & tests for tagged builds

* Return false from WiFi.hostByName() if hostname is not resolved

* Free BT Memory when BT is not used

* WIFI_MODE_NULL is not supported anymore

* Select some key examples to build with PlatformIO to save some time

* Update BLE lib

* Fixed BLE lib

* Major WiFi overhaul

- auto reconnect on connection loss now works
- moved to event groups
- some code clean up and procedure optimizations
- new methods to get a more elaborate system ststus

* Add cmake tests to travis

* Add initial AsyncUDP

* Add NetBIOS lib and fix CMake includes

* Add Initial WebServer

* Fix WebServer and examples

* travis not quiting on build fail

* Try different travis build

* Update IDF to aaf1239

* Fix WPS Example

* fix script permission and add some fail tests to sketch builder

* Add missing space in WiFiClient::write(Stream &stream)

* Changed pinmap to show pins34-39 as GPI

* ArduinoOTA could have endless loop b/c udp.read can return negative result

#1538)

* added OTAWebUpdater

* added OTAWebUpdater

* Updated OTAWebUpdater

* Add PSRAM init and malloc funtions

* Rebuild IDF libs

If Core Debug Level is at DEBUG, a confusing debug message will be emitted if the I2C transaction takes longer complete than the  calculated minimum time.  This original debug message was just to prove that this new i2c code could correctly handle SCL stretching or interrupt latency issues. This delay is not a problem, or an error.  Usually it is caused by a higher priory interrupt starving the i2c ISR.  Usually WiFi is the culprit.  As long of this delay is within the configured timeout (by default 50ms, or can be set with Wire.setTimeOut(milliseconds);) no problem will occur and the transaction will successfully complete.
Chuck.

…bServer (#1562)

Thanks @igrr

* script exec fails on curl error

Fixes: #1597

…s component

Fixes: #1724

add a troubleshooting hint

If the esp32 is reset during a i2c read cycle the slave device may be in control of the SDA line.  

If the SDA line is held low, the esp32 cannot issue a START or STOP to recover the bus. 

The previous code did not correctly configure the SCL output pin, and it cycled SCL 9 times with SDA Low.  Since the slave device was in a READ cycle, it just continued outputting the bits of the current byte.  When the ACK/NAK bit space occurred, The low output value of SDA was interpreted as ACK so the slave device continued with the next byte.  It never terminated the READ cycle. 

This new code will correctly recover from an interrupted READ

The original pins_arduino.h did not correspond to the actual hardware.

…FreeHeap

- Delete queue at end
- Close BT connection before end
- DeInit SPP

* Updated ISSUE_TEMPLATE to try to get better postings

* Added line for PSRAM enabled

* More complete info request as per @stickbreaker

…n size via HardwareSerial::setRxBufferSize. (#1855)

…#1849)

(removed quotes from last line, and fixed indentation, no text changes)

see #1800

* Add delay into example to allow print before sleep

* Changed to Serial.flush()

fixes #1734

Few testers let me know, they were unable with connection to Eduroam network under PEAP+MsCHAPv2 methods.
They were trying many modifications. Solution is very absurd. 
Change board to STA mode manually. 
One tester from Italy was able to connect to Eduroam network under TTLS + MsCHAPv2 with that sketch too!

Sketch was tested and worked almost for all testers with that problem.

* Add wESP32 support

* Add default Ethernet config

* Add BPI-BIT boards connfig

* Add BPI-BIT v1.3 boards

* First commit of FFat library

* Fixed reboot loops if no fat present. Added CMakeLists

* Functionalize the partition checks

* Cleanup, especially in format

* Dont format if mounted.  More wording cleanup

* 16M ffat should only be on 16M board

* Fix some casting issues that trip up the compiler when building as ESP-IDF component

* Initial

* Implementation

* Add to CMakelist.txt

* Add example

* Add IRAM_ATTR

* rmt driver initial version

* supporting conti mode plus interrupts

* using conitnous mode for sending more data

* working continous mode

* rmt driver cleanup after conti mode

* initial version of rmt driver

* adding a simple example

* adding channel and block locks

* modified of rmt interface for simpler/easier usage

* adding header sentinels, split interface to common and additional settings

* Fixes per code review + support for rx callback mode

* renamed internal structures and enums, fixed formatting

* cmake support for rmt

* refactored tx-conti interrupts to function to make it more readable

* added Tx and Rx examples

* added license headers

* minor updates per review

* used struct access, renamed defines, corrected diagram

* TX Flow Control and Code cleanup

* Use semaphore instead of delay

TX functionality is done.

* Use single buffer and empty queue on exit

* Fix compile issues because of LwIP code relocation

* Add temporary header to fix Azure not compiling

* Fix AsyncUDP early init

* AsyncUDP Multicast fixes

* Add source mac address and rework multicast

* Allow redefinition of default pins for Serials 1 and 2

* Update IDF to 3276a13

* Update esptool.py to 2.5.0

* Fix sketches

* Fix log level in BluetoothSetial

#1869 exposed a resource exhaustion issue. The current HAL layer for I2C support is designed to use a shared interrupt, But, during debugging to solve the interrupt overloading condition identified in #1588, and the generation of pr #1717, the interrupt allocation parameters were changed.  This change was unnecessary, the code will work successfully with shared interrupts.  So, there is no need to assign a private interrupt for each I2C peripheral.