ASoC: tas2770: Power cycle amp on ISENSE/VSENSE change

[ Upstream commit f529c91 ] The ISENSE/VSENSE blocks are only powered up when the amplifier transitions from shutdown to active. This means that if those controls are flipped on while the amplifier is already playing back audio, they will have no effect. Fix this by forcing a power cycle around transitions in those controls. Reviewed-by: Neal Gompa <[email protected]> Signed-off-by: Hector Martin <[email protected]> Signed-off-by: James Calligeros <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
chargebyte · lategoodbye · Jul 7, 2025 · Apr 9, 2023 · Jun 6, 2023 · May 21, 2025
commit c81a60bf4b18a9a658bc4766b20190c47bf7a2b9
diff --git a/sound/soc/codecs/tas2770.c b/sound/soc/codecs/tas2770.c
@@ -158,11 +158,37 @@ static const struct snd_kcontrol_new isense_switch =
 static const struct snd_kcontrol_new vsense_switch =
 	SOC_DAPM_SINGLE("Switch", TAS2770_PWR_CTRL, 2, 1, 1);
 
+static int sense_event(struct snd_soc_dapm_widget *w,
+			struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
+	struct tas2770_priv *tas2770 = snd_soc_component_get_drvdata(component);
+
+	/*
+	 * Powering up ISENSE/VSENSE requires a trip through the shutdown state.
+	 * Do that here to ensure that our changes are applied properly, otherwise
+	 * we might end up with non-functional IVSENSE if playback started earlier,
+	 * which would break software speaker protection.
+	 */
+	switch (event) {
+	case SND_SOC_DAPM_PRE_REG:
+		return snd_soc_component_update_bits(component, TAS2770_PWR_CTRL,
+						    TAS2770_PWR_CTRL_MASK,
+						    TAS2770_PWR_CTRL_SHUTDOWN);
+	case SND_SOC_DAPM_POST_REG:
+		return tas2770_update_pwr_ctrl(tas2770);
+	default:
+		return 0;
+	}
+}
+
 static const struct snd_soc_dapm_widget tas2770_dapm_widgets[] = {
 	SND_SOC_DAPM_AIF_IN("ASI1", "ASI1 Playback", 0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_MUX("ASI1 Sel", SND_SOC_NOPM, 0, 0, &tas2770_asi1_mux),
-	SND_SOC_DAPM_SWITCH("ISENSE", TAS2770_PWR_CTRL, 3, 1, &isense_switch),
-	SND_SOC_DAPM_SWITCH("VSENSE", TAS2770_PWR_CTRL, 2, 1, &vsense_switch),
+	SND_SOC_DAPM_SWITCH_E("ISENSE", TAS2770_PWR_CTRL, 3, 1, &isense_switch,
+		sense_event, SND_SOC_DAPM_PRE_REG | SND_SOC_DAPM_POST_REG),
+	SND_SOC_DAPM_SWITCH_E("VSENSE", TAS2770_PWR_CTRL, 2, 1, &vsense_switch,
+		sense_event, SND_SOC_DAPM_PRE_REG | SND_SOC_DAPM_POST_REG),
 	SND_SOC_DAPM_DAC_E("DAC", NULL, SND_SOC_NOPM, 0, 0, tas2770_dac_event,
 			   SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
 	SND_SOC_DAPM_OUTPUT("OUT"),