commit 78ab4be upstream.

A warning on driver removal started occurring after commit 9dd05df
("net: warn if NAPI instance wasn't shut down"). Disable tx napi before
deleting it in mt76_dma_cleanup().

 WARNING: CPU: 4 PID: 18828 at net/core/dev.c:7288 __netif_napi_del_locked+0xf0/0x100
 CPU: 4 UID: 0 PID: 18828 Comm: modprobe Not tainted 6.15.0-rc4 #4 PREEMPT(lazy)
 Hardware name: ASUS System Product Name/PRIME X670E-PRO WIFI, BIOS 3035 09/05/2024
 RIP: 0010:__netif_napi_del_locked+0xf0/0x100
 Call Trace:
 <TASK>
 mt76_dma_cleanup+0x54/0x2f0 [mt76]
 mt7921_pci_remove+0xd5/0x190 [mt7921e]
 pci_device_remove+0x47/0xc0
 device_release_driver_internal+0x19e/0x200
 driver_detach+0x48/0x90
 bus_remove_driver+0x6d/0xf0
 pci_unregister_driver+0x2e/0xb0
 __do_sys_delete_module.isra.0+0x197/0x2e0
 do_syscall_64+0x7b/0x160
 entry_SYSCALL_64_after_hwframe+0x76/0x7e

Tested with mt7921e but the same pattern can be actually applied to other
mt76 drivers calling mt76_dma_cleanup() during removal. Tx napi is enabled
in their *_dma_init() functions and only toggled off and on again inside
their suspend/resume/reset paths. So it should be okay to disable tx
napi in such a generic way.

Found by Linux Verification Center (linuxtesting.org).

Fixes: 2ac515a ("mt76: mt76x02: use napi polling for tx cleanup")
Cc: [email protected]
Signed-off-by: Fedor Pchelkin <[email protected]>
Tested-by: Ming Yen Hsieh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 88f7f56 ]

When a bio with REQ_PREFLUSH is submitted to dm, __send_empty_flush()
generates a flush_bio with REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC,
which causes the flush_bio to be throttled by wbt_wait().

An example from v5.4, similar problem also exists in upstream:

    crash> bt 2091206
    PID: 2091206  TASK: ffff2050df92a300  CPU: 109  COMMAND: "kworker/u260:0"
     #0 [ffff800084a2f7f0] __switch_to at ffff80004008aeb8
     #1 [ffff800084a2f820] __schedule at ffff800040bfa0c4
     #2 [ffff800084a2f880] schedule at ffff800040bfa4b4
     #3 [ffff800084a2f8a0] io_schedule at ffff800040bfa9c4
     #4 [ffff800084a2f8c0] rq_qos_wait at ffff8000405925bc
     #5 [ffff800084a2f940] wbt_wait at ffff8000405bb3a0
     #6 [ffff800084a2f9a0] __rq_qos_throttle at ffff800040592254
     #7 [ffff800084a2f9c0] blk_mq_make_request at ffff80004057cf38
     #8 [ffff800084a2fa60] generic_make_request at ffff800040570138
     #9 [ffff800084a2fae0] submit_bio at ffff8000405703b4
    #10 [ffff800084a2fb50] xlog_write_iclog at ffff800001280834 [xfs]
    #11 [ffff800084a2fbb0] xlog_sync at ffff800001280c3c [xfs]
    #12 [ffff800084a2fbf0] xlog_state_release_iclog at ffff800001280df4 [xfs]
    #13 [ffff800084a2fc10] xlog_write at ffff80000128203c [xfs]
    #14 [ffff800084a2fcd0] xlog_cil_push at ffff8000012846dc [xfs]
    #15 [ffff800084a2fda0] xlog_cil_push_work at ffff800001284a2c [xfs]
    #16 [ffff800084a2fdb0] process_one_work at ffff800040111d08
    #17 [ffff800084a2fe00] worker_thread at ffff8000401121cc
    torvalds#18 [ffff800084a2fe70] kthread at ffff800040118de4

After commit 2def284 ("xfs: don't allow log IO to be throttled"),
the metadata submitted by xlog_write_iclog() should not be throttled.
But due to the existence of the dm layer, throttling flush_bio indirectly
causes the metadata bio to be throttled.

Fix this by conditionally adding REQ_IDLE to flush_bio.bi_opf, which makes
wbt_should_throttle() return false to avoid wbt_wait().

Signed-off-by: Jinliang Zheng <[email protected]>
Reviewed-by: Tianxiang Peng <[email protected]>
Reviewed-by: Hao Peng <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit ee684de ]

As shown in [1], it is possible to corrupt a BPF ELF file such that
arbitrary BPF instructions are loaded by libbpf. This can be done by
setting a symbol (BPF program) section offset to a large (unsigned)
number such that <section start + symbol offset> overflows and points
before the section data in the memory.

Consider the situation below where:
- prog_start = sec_start + symbol_offset    <-- size_t overflow here
- prog_end   = prog_start + prog_size

    prog_start        sec_start        prog_end        sec_end
        |                |                 |              |
        v                v                 v              v
    .....................|################################|............

The report in [1] also provides a corrupted BPF ELF which can be used as
a reproducer:

    $ readelf -S crash
    Section Headers:
      [Nr] Name              Type             Address           Offset
           Size              EntSize          Flags  Link  Info  Align
    ...
      [ 2] uretprobe.mu[...] PROGBITS         0000000000000000  00000040
           0000000000000068  0000000000000000  AX       0     0     8

    $ readelf -s crash
    Symbol table '.symtab' contains 8 entries:
       Num:    Value          Size Type    Bind   Vis      Ndx Name
    ...
         6: ffffffffffffffb8   104 FUNC    GLOBAL DEFAULT    2 handle_tp

Here, the handle_tp prog has section offset ffffffffffffffb8, i.e. will
point before the actual memory where section 2 is allocated.

This is also reported by AddressSanitizer:

    =================================================================
    ==1232==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7c7302fe0000 at pc 0x7fc3046e4b77 bp 0x7ffe64677cd0 sp 0x7ffe64677490
    READ of size 104 at 0x7c7302fe0000 thread T0
        #0 0x7fc3046e4b76 in memcpy (/lib64/libasan.so.8+0xe4b76)
        #1 0x00000040df3e in bpf_object__init_prog /src/libbpf/src/libbpf.c:856
        #2 0x00000040df3e in bpf_object__add_programs /src/libbpf/src/libbpf.c:928
        #3 0x00000040df3e in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3930
        #4 0x00000040df3e in bpf_object_open /src/libbpf/src/libbpf.c:8067
        #5 0x00000040f176 in bpf_object__open_file /src/libbpf/src/libbpf.c:8090
        #6 0x000000400c16 in main /poc/poc.c:8
        #7 0x7fc3043d25b4 in __libc_start_call_main (/lib64/libc.so.6+0x35b4)
        #8 0x7fc3043d2667 in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x3667)
        #9 0x000000400b34 in _start (/poc/poc+0x400b34)

    0x7c7302fe0000 is located 64 bytes before 104-byte region [0x7c7302fe0040,0x7c7302fe00a8)
    allocated by thread T0 here:
        #0 0x7fc3046e716b in malloc (/lib64/libasan.so.8+0xe716b)
        #1 0x7fc3045ee600 in __libelf_set_rawdata_wrlock (/lib64/libelf.so.1+0xb600)
        #2 0x7fc3045ef018 in __elf_getdata_rdlock (/lib64/libelf.so.1+0xc018)
        #3 0x00000040642f in elf_sec_data /src/libbpf/src/libbpf.c:3740

The problem here is that currently, libbpf only checks that the program
end is within the section bounds. There used to be a check
`while (sec_off < sec_sz)` in bpf_object__add_programs, however, it was
removed by commit 6245947 ("libbpf: Allow gaps in BPF program
sections to support overriden weak functions").

Add a check for detecting the overflow of `sec_off + prog_sz` to
bpf_object__init_prog to fix this issue.

[1] https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md

Fixes: 6245947 ("libbpf: Allow gaps in BPF program sections to support overriden weak functions")
Reported-by: lmarch2 <[email protected]>
Signed-off-by: Viktor Malik <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Reviewed-by: Shung-Hsi Yu <[email protected]>
Link: https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>

commit be6e843 upstream.

When migrating a THP, concurrent access to the PMD migration entry during
a deferred split scan can lead to an invalid address access, as
illustrated below.  To prevent this invalid access, it is necessary to
check the PMD migration entry and return early.  In this context, there is
no need to use pmd_to_swp_entry and pfn_swap_entry_to_page to verify the
equality of the target folio.  Since the PMD migration entry is locked, it
cannot be served as the target.

Mailing list discussion and explanation from Hugh Dickins: "An anon_vma
lookup points to a location which may contain the folio of interest, but
might instead contain another folio: and weeding out those other folios is
precisely what the "folio != pmd_folio((*pmd)" check (and the "risk of
replacing the wrong folio" comment a few lines above it) is for."

BUG: unable to handle page fault for address: ffffea60001db008
CPU: 0 UID: 0 PID: 2199114 Comm: tee Not tainted 6.14.0+ #4 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:split_huge_pmd_locked+0x3b5/0x2b60
Call Trace:
<TASK>
try_to_migrate_one+0x28c/0x3730
rmap_walk_anon+0x4f6/0x770
unmap_folio+0x196/0x1f0
split_huge_page_to_list_to_order+0x9f6/0x1560
deferred_split_scan+0xac5/0x12a0
shrinker_debugfs_scan_write+0x376/0x470
full_proxy_write+0x15c/0x220
vfs_write+0x2fc/0xcb0
ksys_write+0x146/0x250
do_syscall_64+0x6a/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e

The bug is found by syzkaller on an internal kernel, then confirmed on
upstream.

Link: https://lkml.kernel.org/r/[email protected]
Link: https://lore.kernel.org/all/[email protected]/
Link: https://lore.kernel.org/all/[email protected]/
Fixes: 84c3fc4 ("mm: thp: check pmd migration entry in common path")
Signed-off-by: Gavin Guo <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Acked-by: Hugh Dickins <[email protected]>
Acked-by: Zi Yan <[email protected]>
Reviewed-by: Gavin Shan <[email protected]>
Cc: Florent Revest <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Miaohe Lin <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
[gavin: backport the migration checking logic to __split_huge_pmd]
Signed-off-by: Gavin Guo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>