Modules changes for v6.12-rc1 #2

modules-kpd-app · 2024-10-03T23:06:15Z

Pull request for series with
subject: Modules changes for v6.12-rc1
version: 1
url: https://patchwork.kernel.org/project/linux-modules/list/?series=893576

modules-kpd-app · 2024-10-03T23:06:16Z

Upstream branch: 9852d85
series: https://patchwork.kernel.org/project/linux-modules/list/?series=893576
version: 1

Pull request is NOT updated. Failed to apply https://patchwork.kernel.org/project/linux-modules/list/?series=893576
error message:

Cmd('git') failed due to: exit code(128)
  cmdline: git am --3way
  stdout: 'Patch is empty.'
  stderr: 'hint: When you have resolved this problem, run "git am --continue".
hint: If you prefer to skip this patch, run "git am --skip" instead.
hint: To record the empty patch as an empty commit, run "git am --allow-empty".
hint: To restore the original branch and stop patching, run "git am --abort".
hint: Disable this message with "git config advice.mergeConflict false"'

conflict:

On the node of an NFS client, some files saved in the mountpoint of the NFS server were copied to another location of the same NFS server. Accidentally, the nfs42_complete_copies() got a NULL-pointer dereference crash with the following syslog: [232064.838881] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116 [232064.839360] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116 [232066.588183] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058 [232066.588586] Mem abort info: [232066.588701] ESR = 0x0000000096000007 [232066.588862] EC = 0x25: DABT (current EL), IL = 32 bits [232066.589084] SET = 0, FnV = 0 [232066.589216] EA = 0, S1PTW = 0 [232066.589340] FSC = 0x07: level 3 translation fault [232066.589559] Data abort info: [232066.589683] ISV = 0, ISS = 0x00000007 [232066.589842] CM = 0, WnR = 0 [232066.589967] user pgtable: 64k pages, 48-bit VAs, pgdp=00002000956ff400 [232066.590231] [0000000000000058] pgd=08001100ae100003, p4d=08001100ae100003, pud=08001100ae100003, pmd=08001100b3c00003, pte=0000000000000000 [232066.590757] Internal error: Oops: 96000007 [#1] SMP [232066.590958] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm vhost_net vhost vhost_iotlb tap tun ipt_rpfilter xt_multiport ip_set_hash_ip ip_set_hash_net xfrm_interface xfrm6_tunnel tunnel4 tunnel6 esp4 ah4 wireguard libcurve25519_generic veth xt_addrtype xt_set nf_conntrack_netlink ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_bitmap_port ip_set_hash_ipport dummy ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs iptable_filter sch_ingress nfnetlink_cttimeout vport_gre ip_gre ip_tunnel gre vport_geneve geneve vport_vxlan vxlan ip6_udp_tunnel udp_tunnel openvswitch nf_conncount dm_round_robin dm_service_time dm_multipath xt_nat xt_MASQUERADE nft_chain_nat nf_nat xt_mark xt_conntrack xt_comment nft_compat nft_counter nf_tables nfnetlink ocfs2 ocfs2_nodemanager ocfs2_stackglue iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_ssif nbd overlay 8021q garp mrp bonding tls rfkill sunrpc ext4 mbcache jbd2 [232066.591052] vfat fat cas_cache cas_disk ses enclosure scsi_transport_sas sg acpi_ipmi ipmi_si ipmi_devintf ipmi_msghandler ip_tables vfio_pci vfio_pci_core vfio_virqfd vfio_iommu_type1 vfio dm_mirror dm_region_hash dm_log dm_mod nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc fuse xfs libcrc32c ast drm_vram_helper qla2xxx drm_kms_helper syscopyarea crct10dif_ce sysfillrect ghash_ce sysimgblt sha2_ce fb_sys_fops cec sha256_arm64 sha1_ce drm_ttm_helper ttm nvme_fc igb sbsa_gwdt nvme_fabrics drm nvme_core i2c_algo_bit i40e scsi_transport_fc megaraid_sas aes_neon_bs [232066.596953] CPU: 6 PID: 4124696 Comm: 10.253.166.125- Kdump: loaded Not tainted 5.15.131-9.cl9_ocfs2.aarch64 #1 [232066.597356] Hardware name: Great Wall .\x93\x8e...RF6260 V5/GWMSSE2GL1T, BIOS T656FBE_V3.0.18 2024-01-06 [232066.597721] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [232066.598034] pc : nfs4_reclaim_open_state+0x220/0x800 [nfsv4] [232066.598327] lr : nfs4_reclaim_open_state+0x12c/0x800 [nfsv4] [232066.598595] sp : ffff8000f568fc70 [232066.598731] x29: ffff8000f568fc70 x28: 0000000000001000 x27: ffff21003db33000 [232066.599030] x26: ffff800005521ae0 x25: ffff0100f98fa3f0 x24: 0000000000000001 [232066.599319] x23: ffff800009920008 x22: ffff21003db33040 x21: ffff21003db33050 [232066.599628] x20: ffff410172fe9e40 x19: ffff410172fe9e00 x18: 0000000000000000 [232066.599914] x17: 0000000000000000 x16: 0000000000000004 x15: 0000000000000000 [232066.600195] x14: 0000000000000000 x13: ffff800008e685a8 x12: 00000000eac0c6e6 [232066.600498] x11: 0000000000000000 x10: 0000000000000008 x9 : ffff8000054e5828 [232066.600784] x8 : 00000000ffffffbf x7 : 0000000000000001 x6 : 000000000a9eb14a [232066.601062] x5 : 0000000000000000 x4 : ffff70ff8a14a800 x3 : 0000000000000058 [232066.601348] x2 : 0000000000000001 x1 : 54dce46366daa6c6 x0 : 0000000000000000 [232066.601636] Call trace: [232066.601749] nfs4_reclaim_open_state+0x220/0x800 [nfsv4] [232066.601998] nfs4_do_reclaim+0x1b8/0x28c [nfsv4] [232066.602218] nfs4_state_manager+0x928/0x10f0 [nfsv4] [232066.602455] nfs4_run_state_manager+0x78/0x1b0 [nfsv4] [232066.602690] kthread+0x110/0x114 [232066.602830] ret_from_fork+0x10/0x20 [232066.602985] Code: 1400000d f9403f20 f9402e61 91016003 (f9402c00) [232066.603284] SMP: stopping secondary CPUs [232066.606936] Starting crashdump kernel... [232066.607146] Bye! Analysing the vmcore, we know that nfs4_copy_state listed by destination nfs_server->ss_copies was added by the field copies in handle_async_copy(), and we found a waiting copy process with the stack as: PID: 3511963 TASK: ffff710028b47e00 CPU: 0 COMMAND: "cp" #0 [ffff8001116ef740] __switch_to at ffff8000081b92f4 #1 [ffff8001116ef760] __schedule at ffff800008dd0650 #2 [ffff8001116ef7c0] schedule at ffff800008dd0a00 #3 [ffff8001116ef7e0] schedule_timeout at ffff800008dd6aa0 #4 [ffff8001116ef860] __wait_for_common at ffff800008dd166c #5 [ffff8001116ef8e0] wait_for_completion_interruptible at ffff800008dd1898 #6 [ffff8001116ef8f0] handle_async_copy at ffff8000055142f4 [nfsv4] #7 [ffff8001116ef970] _nfs42_proc_copy at ffff8000055147c8 [nfsv4] #8 [ffff8001116efa80] nfs42_proc_copy at ffff800005514cf0 [nfsv4] #9 [ffff8001116efc50] __nfs4_copy_file_range.constprop.0 at ffff8000054ed694 [nfsv4] The NULL-pointer dereference was due to nfs42_complete_copies() listed the nfs_server->ss_copies by the field ss_copies of nfs4_copy_state. So the nfs4_copy_state address ffff0100f98fa3f0 was offset by 0x10 and the data accessed through this pointer was also incorrect. Generally, the ordered list nfs4_state_owner->so_states indicate open(O_RDWR) or open(O_WRITE) states are reclaimed firstly by nfs4_reclaim_open_state(). When destination state reclaim is failed with NFS_STATE_RECOVERY_FAILED and copies are not deleted in nfs_server->ss_copies, the source state may be passed to the nfs42_complete_copies() process earlier, resulting in this crash scene finally. To solve this issue, we add a list_head nfs_server->ss_src_copies for a server-to-server copy specially. Fixes: 0e65a32 ("NFS: handle source server reboot") Signed-off-by: Yanjun Zhang <[email protected]> Reviewed-by: Trond Myklebust <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>

Fix a kernel panic in the br_netfilter module when sending untagged traffic via a VxLAN device. This happens during the check for fragmentation in br_nf_dev_queue_xmit. It is dependent on: 1) the br_netfilter module being loaded; 2) net.bridge.bridge-nf-call-iptables set to 1; 3) a bridge with a VxLAN (single-vxlan-device) netdevice as a bridge port; 4) untagged frames with size higher than the VxLAN MTU forwarded/flooded When forwarding the untagged packet to the VxLAN bridge port, before the netfilter hooks are called, br_handle_egress_vlan_tunnel is called and changes the skb_dst to the tunnel dst. The tunnel_dst is a metadata type of dst, i.e., skb_valid_dst(skb) is false, and metadata->dst.dev is NULL. Then in the br_netfilter hooks, in br_nf_dev_queue_xmit, there's a check for frames that needs to be fragmented: frames with higher MTU than the VxLAN device end up calling br_nf_ip_fragment, which in turns call ip_skb_dst_mtu. The ip_dst_mtu tries to use the skb_dst(skb) as if it was a valid dst with valid dst->dev, thus the crash. This case was never supported in the first place, so drop the packet instead. PING 10.0.0.2 (10.0.0.2) from 0.0.0.0 h1-eth0: 2000(2028) bytes of data. [ 176.291791] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000110 [ 176.292101] Mem abort info: [ 176.292184] ESR = 0x0000000096000004 [ 176.292322] EC = 0x25: DABT (current EL), IL = 32 bits [ 176.292530] SET = 0, FnV = 0 [ 176.292709] EA = 0, S1PTW = 0 [ 176.292862] FSC = 0x04: level 0 translation fault [ 176.293013] Data abort info: [ 176.293104] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 176.293488] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 176.293787] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 176.293995] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000043ef5000 [ 176.294166] [0000000000000110] pgd=0000000000000000, p4d=0000000000000000 [ 176.294827] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 176.295252] Modules linked in: vxlan ip6_udp_tunnel udp_tunnel veth br_netfilter bridge stp llc ipv6 crct10dif_ce [ 176.295923] CPU: 0 PID: 188 Comm: ping Not tainted 6.8.0-rc3-g5b3fbd61b9d1 #2 [ 176.296314] Hardware name: linux,dummy-virt (DT) [ 176.296535] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 176.296808] pc : br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter] [ 176.297382] lr : br_nf_dev_queue_xmit+0x2ac/0x4ec [br_netfilter] [ 176.297636] sp : ffff800080003630 [ 176.297743] x29: ffff800080003630 x28: 0000000000000008 x27: ffff6828c49ad9f8 [ 176.298093] x26: ffff6828c49ad000 x25: 0000000000000000 x24: 00000000000003e8 [ 176.298430] x23: 0000000000000000 x22: ffff6828c4960b40 x21: ffff6828c3b16d28 [ 176.298652] x20: ffff6828c3167048 x19: ffff6828c3b16d00 x18: 0000000000000014 [ 176.298926] x17: ffffb0476322f000 x16: ffffb7e164023730 x15: 0000000095744632 [ 176.299296] x14: ffff6828c3f1c880 x13: 0000000000000002 x12: ffffb7e137926a70 [ 176.299574] x11: 0000000000000001 x10: ffff6828c3f1c898 x9 : 0000000000000000 [ 176.300049] x8 : ffff6828c49bf070 x7 : 0008460f18d5f20e x6 : f20e0100bebafeca [ 176.300302] x5 : ffff6828c7f918fe x4 : ffff6828c49bf070 x3 : 0000000000000000 [ 176.300586] x2 : 0000000000000000 x1 : ffff6828c3c7ad00 x0 : ffff6828c7f918f0 [ 176.300889] Call trace: [ 176.301123] br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter] [ 176.301411] br_nf_post_routing+0x2a8/0x3e4 [br_netfilter] [ 176.301703] nf_hook_slow+0x48/0x124 [ 176.302060] br_forward_finish+0xc8/0xe8 [bridge] [ 176.302371] br_nf_hook_thresh+0x124/0x134 [br_netfilter] [ 176.302605] br_nf_forward_finish+0x118/0x22c [br_netfilter] [ 176.302824] br_nf_forward_ip.part.0+0x264/0x290 [br_netfilter] [ 176.303136] br_nf_forward+0x2b8/0x4e0 [br_netfilter] [ 176.303359] nf_hook_slow+0x48/0x124 [ 176.303803] __br_forward+0xc4/0x194 [bridge] [ 176.304013] br_flood+0xd4/0x168 [bridge] [ 176.304300] br_handle_frame_finish+0x1d4/0x5c4 [bridge] [ 176.304536] br_nf_hook_thresh+0x124/0x134 [br_netfilter] [ 176.304978] br_nf_pre_routing_finish+0x29c/0x494 [br_netfilter] [ 176.305188] br_nf_pre_routing+0x250/0x524 [br_netfilter] [ 176.305428] br_handle_frame+0x244/0x3cc [bridge] [ 176.305695] __netif_receive_skb_core.constprop.0+0x33c/0xecc [ 176.306080] __netif_receive_skb_one_core+0x40/0x8c [ 176.306197] __netif_receive_skb+0x18/0x64 [ 176.306369] process_backlog+0x80/0x124 [ 176.306540] __napi_poll+0x38/0x17c [ 176.306636] net_rx_action+0x124/0x26c [ 176.306758] __do_softirq+0x100/0x26c [ 176.307051] ____do_softirq+0x10/0x1c [ 176.307162] call_on_irq_stack+0x24/0x4c [ 176.307289] do_softirq_own_stack+0x1c/0x2c [ 176.307396] do_softirq+0x54/0x6c [ 176.307485] __local_bh_enable_ip+0x8c/0x98 [ 176.307637] __dev_queue_xmit+0x22c/0xd28 [ 176.307775] neigh_resolve_output+0xf4/0x1a0 [ 176.308018] ip_finish_output2+0x1c8/0x628 [ 176.308137] ip_do_fragment+0x5b4/0x658 [ 176.308279] ip_fragment.constprop.0+0x48/0xec [ 176.308420] __ip_finish_output+0xa4/0x254 [ 176.308593] ip_finish_output+0x34/0x130 [ 176.308814] ip_output+0x6c/0x108 [ 176.308929] ip_send_skb+0x50/0xf0 [ 176.309095] ip_push_pending_frames+0x30/0x54 [ 176.309254] raw_sendmsg+0x758/0xaec [ 176.309568] inet_sendmsg+0x44/0x70 [ 176.309667] __sys_sendto+0x110/0x178 [ 176.309758] __arm64_sys_sendto+0x28/0x38 [ 176.309918] invoke_syscall+0x48/0x110 [ 176.310211] el0_svc_common.constprop.0+0x40/0xe0 [ 176.310353] do_el0_svc+0x1c/0x28 [ 176.310434] el0_svc+0x34/0xb4 [ 176.310551] el0t_64_sync_handler+0x120/0x12c [ 176.310690] el0t_64_sync+0x190/0x194 [ 176.311066] Code: f9402e61 79402aa2 927ff821 f9400023 (f9408860) [ 176.315743] ---[ end trace 0000000000000000 ]--- [ 176.316060] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 176.316371] Kernel Offset: 0x37e0e3000000 from 0xffff800080000000 [ 176.316564] PHYS_OFFSET: 0xffff97d780000000 [ 176.316782] CPU features: 0x0,88000203,3c020000,0100421b [ 176.317210] Memory Limit: none [ 176.317527] ---[ end Kernel panic - not syncing: Oops: Fatal Exception in interrupt ]---\ Fixes: 11538d0 ("bridge: vlan dst_metadata hooks in ingress and egress paths") Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: Andy Roulin <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Andy Roulin says: ==================== netfilter: br_netfilter: fix panic with metadata_dst skb There's a kernel panic possible in the br_netfilter module when sending untagged traffic via a VxLAN device. Traceback is included below. This happens during the check for fragmentation in br_nf_dev_queue_xmit if the MTU on the VxLAN device is not big enough. It is dependent on: 1) the br_netfilter module being loaded; 2) net.bridge.bridge-nf-call-iptables set to 1; 3) a bridge with a VxLAN (single-vxlan-device) netdevice as a bridge port; 4) untagged frames with size higher than the VxLAN MTU forwarded/flooded This case was never supported in the first place, so the first patch drops such packets. A regression selftest is added as part of the second patch. PING 10.0.0.2 (10.0.0.2) from 0.0.0.0 h1-eth0: 2000(2028) bytes of data. [ 176.291791] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000110 [ 176.292101] Mem abort info: [ 176.292184] ESR = 0x0000000096000004 [ 176.292322] EC = 0x25: DABT (current EL), IL = 32 bits [ 176.292530] SET = 0, FnV = 0 [ 176.292709] EA = 0, S1PTW = 0 [ 176.292862] FSC = 0x04: level 0 translation fault [ 176.293013] Data abort info: [ 176.293104] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 176.293488] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 176.293787] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 176.293995] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000043ef5000 [ 176.294166] [0000000000000110] pgd=0000000000000000, p4d=0000000000000000 [ 176.294827] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 176.295252] Modules linked in: vxlan ip6_udp_tunnel udp_tunnel veth br_netfilter bridge stp llc ipv6 crct10dif_ce [ 176.295923] CPU: 0 PID: 188 Comm: ping Not tainted 6.8.0-rc3-g5b3fbd61b9d1 #2 [ 176.296314] Hardware name: linux,dummy-virt (DT) [ 176.296535] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 176.296808] pc : br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter] [ 176.297382] lr : br_nf_dev_queue_xmit+0x2ac/0x4ec [br_netfilter] [ 176.297636] sp : ffff800080003630 [ 176.297743] x29: ffff800080003630 x28: 0000000000000008 x27: ffff6828c49ad9f8 [ 176.298093] x26: ffff6828c49ad000 x25: 0000000000000000 x24: 00000000000003e8 [ 176.298430] x23: 0000000000000000 x22: ffff6828c4960b40 x21: ffff6828c3b16d28 [ 176.298652] x20: ffff6828c3167048 x19: ffff6828c3b16d00 x18: 0000000000000014 [ 176.298926] x17: ffffb0476322f000 x16: ffffb7e164023730 x15: 0000000095744632 [ 176.299296] x14: ffff6828c3f1c880 x13: 0000000000000002 x12: ffffb7e137926a70 [ 176.299574] x11: 0000000000000001 x10: ffff6828c3f1c898 x9 : 0000000000000000 [ 176.300049] x8 : ffff6828c49bf070 x7 : 0008460f18d5f20e x6 : f20e0100bebafeca [ 176.300302] x5 : ffff6828c7f918fe x4 : ffff6828c49bf070 x3 : 0000000000000000 [ 176.300586] x2 : 0000000000000000 x1 : ffff6828c3c7ad00 x0 : ffff6828c7f918f0 [ 176.300889] Call trace: [ 176.301123] br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter] [ 176.301411] br_nf_post_routing+0x2a8/0x3e4 [br_netfilter] [ 176.301703] nf_hook_slow+0x48/0x124 [ 176.302060] br_forward_finish+0xc8/0xe8 [bridge] [ 176.302371] br_nf_hook_thresh+0x124/0x134 [br_netfilter] [ 176.302605] br_nf_forward_finish+0x118/0x22c [br_netfilter] [ 176.302824] br_nf_forward_ip.part.0+0x264/0x290 [br_netfilter] [ 176.303136] br_nf_forward+0x2b8/0x4e0 [br_netfilter] [ 176.303359] nf_hook_slow+0x48/0x124 [ 176.303803] __br_forward+0xc4/0x194 [bridge] [ 176.304013] br_flood+0xd4/0x168 [bridge] [ 176.304300] br_handle_frame_finish+0x1d4/0x5c4 [bridge] [ 176.304536] br_nf_hook_thresh+0x124/0x134 [br_netfilter] [ 176.304978] br_nf_pre_routing_finish+0x29c/0x494 [br_netfilter] [ 176.305188] br_nf_pre_routing+0x250/0x524 [br_netfilter] [ 176.305428] br_handle_frame+0x244/0x3cc [bridge] [ 176.305695] __netif_receive_skb_core.constprop.0+0x33c/0xecc [ 176.306080] __netif_receive_skb_one_core+0x40/0x8c [ 176.306197] __netif_receive_skb+0x18/0x64 [ 176.306369] process_backlog+0x80/0x124 [ 176.306540] __napi_poll+0x38/0x17c [ 176.306636] net_rx_action+0x124/0x26c [ 176.306758] __do_softirq+0x100/0x26c [ 176.307051] ____do_softirq+0x10/0x1c [ 176.307162] call_on_irq_stack+0x24/0x4c [ 176.307289] do_softirq_own_stack+0x1c/0x2c [ 176.307396] do_softirq+0x54/0x6c [ 176.307485] __local_bh_enable_ip+0x8c/0x98 [ 176.307637] __dev_queue_xmit+0x22c/0xd28 [ 176.307775] neigh_resolve_output+0xf4/0x1a0 [ 176.308018] ip_finish_output2+0x1c8/0x628 [ 176.308137] ip_do_fragment+0x5b4/0x658 [ 176.308279] ip_fragment.constprop.0+0x48/0xec [ 176.308420] __ip_finish_output+0xa4/0x254 [ 176.308593] ip_finish_output+0x34/0x130 [ 176.308814] ip_output+0x6c/0x108 [ 176.308929] ip_send_skb+0x50/0xf0 [ 176.309095] ip_push_pending_frames+0x30/0x54 [ 176.309254] raw_sendmsg+0x758/0xaec [ 176.309568] inet_sendmsg+0x44/0x70 [ 176.309667] __sys_sendto+0x110/0x178 [ 176.309758] __arm64_sys_sendto+0x28/0x38 [ 176.309918] invoke_syscall+0x48/0x110 [ 176.310211] el0_svc_common.constprop.0+0x40/0xe0 [ 176.310353] do_el0_svc+0x1c/0x28 [ 176.310434] el0_svc+0x34/0xb4 [ 176.310551] el0t_64_sync_handler+0x120/0x12c [ 176.310690] el0t_64_sync+0x190/0x194 [ 176.311066] Code: f9402e61 79402aa2 927ff821 f9400023 (f9408860) [ 176.315743] ---[ end trace 0000000000000000 ]--- [ 176.316060] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 176.316371] Kernel Offset: 0x37e0e3000000 from 0xffff800080000000 [ 176.316564] PHYS_OFFSET: 0xffff97d780000000 [ 176.316782] CPU features: 0x0,88000203,3c020000,0100421b [ 176.317210] Memory Limit: none [ 176.317527] ---[ end Kernel panic - not syncing: Oops: Fatal Exception in interrupt ]---\ ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

modules-kpd-app · 2024-10-19T22:12:12Z

At least one diff in series https://patchwork.kernel.org/project/linux-modules/list/?series=893576 irrelevant now. Closing PR.

…ux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 changes for 6.13, part #2 - Constrain invalidations from GICR_INVLPIR to only affect the LPI INTID space - Set of robustness improvements to the management of vgic irqs and GIC ITS table entries - Fix compilation issue w/ CONFIG_CC_OPTIMIZE_FOR_SIZE=y where set_sysreg_masks() wasn't getting inlined, breaking check for a constant sysreg index - Correct KVM's vPMU overflow condition to match the architecture for hyp and non-hyp counters

…ndex Intel SoundWire machine driver always uses Pin number 2 and above. Currently, the pin number is used as the FW DAI index directly. As a result, FW DAI 0 and 1 are never used. That worked fine because we use up to 2 DAIs in a SDW link. Convert the topology pin index to ALH dai index, the mapping is using 2-off indexing, iow, pin #2 is ALH dai #0. The issue exists since beginning. And the Fixes tag is the first commit that this commit can be applied. Fixes: b66bfc3 ("ASoC: SOF: sof-audio: Fix broken early bclk feature for SSP") Signed-off-by: Bard Liao <[email protected]> Reviewed-by: Péter Ujfalusi <[email protected]> Reviewed-by: Liam Girdwood <[email protected]> Reviewed-by: Kai Vehmanen <[email protected]> Reviewed-by: Ranjani Sridharan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>

…to HEAD KVM/riscv changes for 6.13 part #2 - Svade and Svadu extension support for Host and Guest/VM

Kernel will hang on destroy admin_q while we create ctrl failed, such as following calltrace: PID: 23644 TASK: ff2d52b40f439fc0 CPU: 2 COMMAND: "nvme" #0 [ff61d23de260fb78] __schedule at ffffffff8323bc15 #1 [ff61d23de260fc08] schedule at ffffffff8323c014 #2 [ff61d23de260fc28] blk_mq_freeze_queue_wait at ffffffff82a3dba1 #3 [ff61d23de260fc78] blk_freeze_queue at ffffffff82a4113a #4 [ff61d23de260fc90] blk_cleanup_queue at ffffffff82a33006 #5 [ff61d23de260fcb0] nvme_rdma_destroy_admin_queue at ffffffffc12686ce #6 [ff61d23de260fcc8] nvme_rdma_setup_ctrl at ffffffffc1268ced #7 [ff61d23de260fd28] nvme_rdma_create_ctrl at ffffffffc126919b #8 [ff61d23de260fd68] nvmf_dev_write at ffffffffc024f362 #9 [ff61d23de260fe38] vfs_write at ffffffff827d5f25 RIP: 00007fda7891d574 RSP: 00007ffe2ef06958 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 000055e8122a4d90 RCX: 00007fda7891d574 RDX: 000000000000012b RSI: 000055e8122a4d90 RDI: 0000000000000004 RBP: 00007ffe2ef079c0 R8: 000000000000012b R9: 000055e8122a4d90 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000004 R13: 000055e8122923c0 R14: 000000000000012b R15: 00007fda78a54500 ORIG_RAX: 0000000000000001 CS: 0033 SS: 002b This due to we have quiesced admi_q before cancel requests, but forgot to unquiesce before destroy it, as a result we fail to drain the pending requests, and hang on blk_mq_freeze_queue_wait() forever. Here try to reuse nvme_rdma_teardown_admin_queue() to fix this issue and simplify the code. Fixes: 958dc1d ("nvme-rdma: add clean action for failed reconnection") Reported-by: Yingfu.zhou <[email protected]> Signed-off-by: Chunguang.xu <[email protected]> Signed-off-by: Yue.zhao <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Keith Busch <[email protected]>

Konstantin Shkolnyy says: ==================== vsock/test: fix wrong setsockopt() parameters Parameters were created using wrong C types, which caused them to be of wrong size on some architectures, causing problems. The problem with SO_RCVLOWAT was found on s390 (big endian), while x86-64 didn't show it. After the fix, all tests pass on s390. Then Stefano Garzarella pointed out that SO_VM_SOCKETS_* calls might have a similar problem, which turned out to be true, hence, the second patch. Changes for v8: - Fix whitespace warnings from "checkpatch.pl --strict" - Add maintainers to Cc: Changes for v7: - Rebase on top of https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git - Add the "net" tags to the subjects Changes for v6: - rework the patch #3 to avoid creating a new file for new functions, and exclude vsock_perf from calling the new functions. - add "Reviewed-by:" to the patch #2. Changes for v5: - in the patch #2 replace the introduced uint64_t with unsigned long long to match documentation - add a patch #3 that verifies every setsockopt() call. Changes for v4: - add "Reviewed-by:" to the first patch, and add a second patch fixing SO_VM_SOCKETS_* calls, which depends on the first one (hence, it's now a patch series.) Changes for v3: - fix the same problem in vsock_perf and update commit message Changes for v2: - add "Fixes:" lines to the commit message ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

Add more test cases for LPM trie in test_maps: 1) test_lpm_trie_update_flags It constructs various use cases for BPF_EXIST and BPF_NOEXIST and check whether the return value of update operation is expected. 2) test_lpm_trie_update_full_maps It tests the update operations on a full LPM trie map. Adding new node will fail and overwriting the value of existed node will succeed. 3) test_lpm_trie_iterate_strs and test_lpm_trie_iterate_ints There two test cases test whether the iteration through get_next_key is sorted and expected. These two test cases delete the minimal key after each iteration and check whether next iteration returns the second minimal key. The only difference between these two test cases is the former one saves strings in the LPM trie and the latter saves integers. Without the fix of get_next_key, these two cases will fail as shown below: test_lpm_trie_iterate_strs(1091):FAIL:iterate #2 got abc exp abS test_lpm_trie_iterate_ints(1142):FAIL:iterate #1 got 0x2 exp 0x1 Signed-off-by: Hou Tao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>

Hou Tao says: ==================== This patch set fixes several issues for LPM trie. These issues were found during adding new test cases or were reported by syzbot. The patch set is structured as follows: Patch #1~#2 are clean-ups for lpm_trie_update_elem(). Patch #3 handles BPF_EXIST and BPF_NOEXIST correctly for LPM trie. Patch #4 fixes the accounting of n_entries when doing in-place update. Patch #5 fixes the exact match condition in trie_get_next_key() and it may skip keys when the passed key is not found in the map. Patch #6~#7 switch from kmalloc() to bpf memory allocator for LPM trie to fix several lock order warnings reported by syzbot. It also enables raw_spinlock_t for LPM trie again. After these changes, the LPM trie will be closer to being usable in any context (though the reentrance check of trie->lock is still missing, but it is on my todo list). Patch #8: move test_lpm_map to map_tests to make it run regularly. Patch #9: add test cases for the issues fixed by patch #3~#5. Please see individual patches for more details. Comments are always welcome. Change Log: v3: * patch #2: remove the unnecessary NULL-init for im_node * patch #6: alloc the leaf node before disabling IRQ to low the possibility of -ENOMEM when leaf_size is large; Free these nodes outside the trie lock (Suggested by Alexei) * collect review and ack tags (Thanks for Toke & Daniel) v2: https://lore.kernel.org/bpf/[email protected]/ * collect review tags (Thanks for Toke) * drop "Add bpf_mem_cache_is_mergeable() helper" patch * patch #3~#4: add fix tag * patch #4: rename the helper to trie_check_add_elem() and increase n_entries in it. * patch #6: use one bpf mem allocator and update commit message to clarify that using bpf mem allocator is more appropriate. * patch #7: update commit message to add the possible max running time for update operation. * patch #9: update commit message to specify the purpose of these test cases. v1: https://lore.kernel.org/bpf/[email protected]/ ==================== Link: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Alexei Starovoitov <[email protected]>

Since the netlink attribute range validation provides inclusive checking, the *max* of attribute NL80211_ATTR_MLO_LINK_ID should be IEEE80211_MLD_MAX_NUM_LINKS - 1 otherwise causing an off-by-one. One crash stack for demonstration: ================================================================== BUG: KASAN: wild-memory-access in ieee80211_tx_control_port+0x3b6/0xca0 net/mac80211/tx.c:5939 Read of size 6 at addr 001102080000000c by task fuzzer.386/9508 CPU: 1 PID: 9508 Comm: syz.1.386 Not tainted 6.1.70 #2 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x177/0x231 lib/dump_stack.c:106 print_report+0xe0/0x750 mm/kasan/report.c:398 kasan_report+0x139/0x170 mm/kasan/report.c:495 kasan_check_range+0x287/0x290 mm/kasan/generic.c:189 memcpy+0x25/0x60 mm/kasan/shadow.c:65 ieee80211_tx_control_port+0x3b6/0xca0 net/mac80211/tx.c:5939 rdev_tx_control_port net/wireless/rdev-ops.h:761 [inline] nl80211_tx_control_port+0x7b3/0xc40 net/wireless/nl80211.c:15453 genl_family_rcv_msg_doit+0x22e/0x320 net/netlink/genetlink.c:756 genl_family_rcv_msg net/netlink/genetlink.c:833 [inline] genl_rcv_msg+0x539/0x740 net/netlink/genetlink.c:850 netlink_rcv_skb+0x1de/0x420 net/netlink/af_netlink.c:2508 genl_rcv+0x24/0x40 net/netlink/genetlink.c:861 netlink_unicast_kernel net/netlink/af_netlink.c:1326 [inline] netlink_unicast+0x74b/0x8c0 net/netlink/af_netlink.c:1352 netlink_sendmsg+0x882/0xb90 net/netlink/af_netlink.c:1874 sock_sendmsg_nosec net/socket.c:716 [inline] __sock_sendmsg net/socket.c:728 [inline] ____sys_sendmsg+0x5cc/0x8f0 net/socket.c:2499 ___sys_sendmsg+0x21c/0x290 net/socket.c:2553 __sys_sendmsg net/socket.c:2582 [inline] __do_sys_sendmsg net/socket.c:2591 [inline] __se_sys_sendmsg+0x19e/0x270 net/socket.c:2589 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x45/0x90 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x63/0xcd Update the policy to ensure correct validation. Fixes: 7b0a0e3 ("wifi: cfg80211: do some rework towards MLO link APIs") Signed-off-by: Lin Ma <[email protected]> Suggested-by: Cengiz Can <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Johannes Berg <[email protected]>

Its used from trace__run(), for the 'perf trace' live mode, i.e. its strace-like, non-perf.data file processing mode, the most common one. The trace__run() function will set trace->host using machine__new_host() that is supposed to give a machine instance representing the running machine, and since we'll use perf_env__arch_strerrno() to get the right errno -> string table, we need to use machine->env, so initialize it in machine__new_host(). Before the patch: (gdb) run trace --errno-summary -a sleep 1 <SNIP> Summary of events: gvfs-afc-volume (3187), 2 events, 0.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ pselect6 1 0 0.000 0.000 0.000 0.000 0.00% GUsbEventThread (3519), 2 events, 0.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ poll 1 0 0.000 0.000 0.000 0.000 0.00% <SNIP> Program received signal SIGSEGV, Segmentation fault. 0x00000000005caba0 in perf_env__arch_strerrno (env=0x0, err=110) at util/env.c:478 478 if (env->arch_strerrno == NULL) (gdb) bt #0 0x00000000005caba0 in perf_env__arch_strerrno (env=0x0, err=110) at util/env.c:478 #1 0x00000000004b75d2 in thread__dump_stats (ttrace=0x14f58f0, trace=0x7fffffffa5b0, fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>) at builtin-trace.c:4673 #2 0x00000000004b78bf in trace__fprintf_thread (fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>, thread=0x10fa0b0, trace=0x7fffffffa5b0) at builtin-trace.c:4708 #3 0x00000000004b7ad9 in trace__fprintf_thread_summary (trace=0x7fffffffa5b0, fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>) at builtin-trace.c:4747 #4 0x00000000004b656e in trace__run (trace=0x7fffffffa5b0, argc=2, argv=0x7fffffffde60) at builtin-trace.c:4456 #5 0x00000000004ba43e in cmd_trace (argc=2, argv=0x7fffffffde60) at builtin-trace.c:5487 #6 0x00000000004c0414 in run_builtin (p=0xec3068 <commands+648>, argc=5, argv=0x7fffffffde60) at perf.c:351 #7 0x00000000004c06bb in handle_internal_command (argc=5, argv=0x7fffffffde60) at perf.c:404 #8 0x00000000004c0814 in run_argv (argcp=0x7fffffffdc4c, argv=0x7fffffffdc40) at perf.c:448 #9 0x00000000004c0b5d in main (argc=5, argv=0x7fffffffde60) at perf.c:560 (gdb) After: root@number:~# perf trace -a --errno-summary sleep 1 <SNIP> pw-data-loop (2685), 1410 events, 16.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ epoll_wait 188 0 983.428 0.000 5.231 15.595 8.68% ioctl 94 0 0.811 0.004 0.009 0.016 2.82% read 188 0 0.322 0.001 0.002 0.006 5.15% write 141 0 0.280 0.001 0.002 0.018 8.39% timerfd_settime 94 0 0.138 0.001 0.001 0.007 6.47% gnome-control-c (179406), 1848 events, 20.9% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ poll 222 0 959.577 0.000 4.322 21.414 11.40% recvmsg 150 0 0.539 0.001 0.004 0.013 5.12% write 300 0 0.442 0.001 0.001 0.007 3.29% read 150 0 0.183 0.001 0.001 0.009 5.53% getpid 102 0 0.101 0.000 0.001 0.008 7.82% root@number:~# Fixes: 54373b5 ("perf env: Introduce perf_env__arch_strerrno()") Reported-by: Veronika Molnarova <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Veronika Molnarova <[email protected]> Acked-by: Michael Petlan <[email protected]> Tested-by: Michael Petlan <[email protected]> Link: https://lore.kernel.org/r/Z0XffUgNSv_9OjOi@x1 Signed-off-by: Namhyung Kim <[email protected]>

When virtnet_close is followed by virtnet_open, some TX completions can possibly remain unconsumed, until they are finally processed during the first NAPI poll after the netdev_tx_reset_queue(), resulting in a crash [1]. Commit b96ed2c ("virtio_net: move netdev_tx_reset_queue() call before RX napi enable") was not sufficient to eliminate all BQL crash cases for virtio-net. This issue can be reproduced with the latest net-next master by running: `while :; do ip l set DEV down; ip l set DEV up; done` under heavy network TX load from inside the machine. netdev_tx_reset_queue() can actually be dropped from virtnet_open path; the device is not stopped in any case. For BQL core part, it's just like traffic nearly ceases to exist for some period. For stall detector added to BQL, even if virtnet_close could somehow lead to some TX completions delayed for long, followed by virtnet_open, we can just take it as stall as mentioned in commit 6025b91 ("net: dqs: add NIC stall detector based on BQL"). Note also that users can still reset stall_max via sysfs. So, drop netdev_tx_reset_queue() from virtnet_enable_queue_pair(). This eliminates the BQL crashes. As a result, netdev_tx_reset_queue() is now explicitly required in freeze/restore path. This patch adds it to immediately after free_unused_bufs(), following the rule of thumb: netdev_tx_reset_queue() should follow any SKB freeing not followed by netdev_tx_completed_queue(). This seems the most consistent and streamlined approach, and now netdev_tx_reset_queue() runs whenever free_unused_bufs() is done. [1]: ------------[ cut here ]------------ kernel BUG at lib/dynamic_queue_limits.c:99! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 UID: 0 PID: 1598 Comm: ip Tainted: G N 6.12.0net-next_main+ #2 Tainted: [N]=TEST Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), \ BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:dql_completed+0x26b/0x290 Code: b7 c2 49 89 e9 44 89 da 89 c6 4c 89 d7 e8 ed 17 47 00 58 65 ff 0d 4d 27 90 7e 0f 85 fd fe ff ff e8 ea 53 8d ff e9 f3 fe ff ff <0f> 0b 01 d2 44 89 d1 29 d1 ba 00 00 00 00 0f 48 ca e9 28 ff ff ff RSP: 0018:ffffc900002b0d08 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffff888102398c80 RCX: 0000000080190009 RDX: 0000000000000000 RSI: 000000000000006a RDI: 0000000000000000 RBP: ffff888102398c00 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000000000ca R11: 0000000000015681 R12: 0000000000000001 R13: ffffc900002b0d68 R14: ffff88811115e000 R15: ffff8881107aca40 FS: 00007f41ded69500(0000) GS:ffff888667dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556ccc2dc1a0 CR3: 0000000104fd8003 CR4: 0000000000772ef0 PKRU: 55555554 Call Trace: <IRQ> ? die+0x32/0x80 ? do_trap+0xd9/0x100 ? dql_completed+0x26b/0x290 ? dql_completed+0x26b/0x290 ? do_error_trap+0x6d/0xb0 ? dql_completed+0x26b/0x290 ? exc_invalid_op+0x4c/0x60 ? dql_completed+0x26b/0x290 ? asm_exc_invalid_op+0x16/0x20 ? dql_completed+0x26b/0x290 __free_old_xmit+0xff/0x170 [virtio_net] free_old_xmit+0x54/0xc0 [virtio_net] virtnet_poll+0xf4/0xe30 [virtio_net] ? __update_load_avg_cfs_rq+0x264/0x2d0 ? update_curr+0x35/0x260 ? reweight_entity+0x1be/0x260 __napi_poll.constprop.0+0x28/0x1c0 net_rx_action+0x329/0x420 ? enqueue_hrtimer+0x35/0x90 ? trace_hardirqs_on+0x1d/0x80 ? kvm_sched_clock_read+0xd/0x20 ? sched_clock+0xc/0x30 ? kvm_sched_clock_read+0xd/0x20 ? sched_clock+0xc/0x30 ? sched_clock_cpu+0xd/0x1a0 handle_softirqs+0x138/0x3e0 do_softirq.part.0+0x89/0xc0 </IRQ> <TASK> __local_bh_enable_ip+0xa7/0xb0 virtnet_open+0xc8/0x310 [virtio_net] __dev_open+0xfa/0x1b0 __dev_change_flags+0x1de/0x250 dev_change_flags+0x22/0x60 do_setlink.isra.0+0x2df/0x10b0 ? rtnetlink_rcv_msg+0x34f/0x3f0 ? netlink_rcv_skb+0x54/0x100 ? netlink_unicast+0x23e/0x390 ? netlink_sendmsg+0x21e/0x490 ? ____sys_sendmsg+0x31b/0x350 ? avc_has_perm_noaudit+0x67/0xf0 ? cred_has_capability.isra.0+0x75/0x110 ? __nla_validate_parse+0x5f/0xee0 ? __pfx___probestub_irq_enable+0x3/0x10 ? __create_object+0x5e/0x90 ? security_capable+0x3b/0x70 rtnl_newlink+0x784/0xaf0 ? avc_has_perm_noaudit+0x67/0xf0 ? cred_has_capability.isra.0+0x75/0x110 ? stack_depot_save_flags+0x24/0x6d0 ? __pfx_rtnl_newlink+0x10/0x10 rtnetlink_rcv_msg+0x34f/0x3f0 ? do_syscall_64+0x6c/0x180 ? entry_SYSCALL_64_after_hwframe+0x76/0x7e ? __pfx_rtnetlink_rcv_msg+0x10/0x10 netlink_rcv_skb+0x54/0x100 netlink_unicast+0x23e/0x390 netlink_sendmsg+0x21e/0x490 ____sys_sendmsg+0x31b/0x350 ? copy_msghdr_from_user+0x6d/0xa0 ___sys_sendmsg+0x86/0xd0 ? __pte_offset_map+0x17/0x160 ? preempt_count_add+0x69/0xa0 ? __call_rcu_common.constprop.0+0x147/0x610 ? preempt_count_add+0x69/0xa0 ? preempt_count_add+0x69/0xa0 ? _raw_spin_trylock+0x13/0x60 ? trace_hardirqs_on+0x1d/0x80 __sys_sendmsg+0x66/0xc0 do_syscall_64+0x6c/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f41defe5b34 Code: 15 e1 12 0f 00 f7 d8 64 89 02 b8 ff ff ff ff eb bf 0f 1f 44 00 00 f3 0f 1e fa 80 3d 35 95 0f 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 4c c3 0f 1f 00 55 48 89 e5 48 83 ec 20 89 55 RSP: 002b:00007ffe5336ecc8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f41defe5b34 RDX: 0000000000000000 RSI: 00007ffe5336ed30 RDI: 0000000000000003 RBP: 00007ffe5336eda0 R08: 0000000000000010 R09: 0000000000000001 R10: 00007ffe5336f6f9 R11: 0000000000000202 R12: 0000000000000003 R13: 0000000067452259 R14: 0000556ccc28b040 R15: 0000000000000000 </TASK> [...] Fixes: c8bd1f7 ("virtio_net: add support for Byte Queue Limits") Cc: <[email protected]> # v6.11+ Signed-off-by: Koichiro Den <[email protected]> Acked-by: Jason Wang <[email protected]> Reviewed-by: Xuan Zhuo <[email protected]> [ pabeni: trimmed possibly troublesome separator ] Signed-off-by: Paolo Abeni <[email protected]>

…nts' Koichiro Den says: ==================== virtio_net: correct netdev_tx_reset_queue() invocation points When virtnet_close is followed by virtnet_open, some TX completions can possibly remain unconsumed, until they are finally processed during the first NAPI poll after the netdev_tx_reset_queue(), resulting in a crash [1]. Commit b96ed2c ("virtio_net: move netdev_tx_reset_queue() call before RX napi enable") was not sufficient to eliminate all BQL crash scenarios for virtio-net. This issue can be reproduced with the latest net-next master by running: `while :; do ip l set DEV down; ip l set DEV up; done` under heavy network TX load from inside the machine. This patch series resolves the issue and also addresses similar existing problems: (a). Drop netdev_tx_reset_queue() from open/close path. This eliminates the BQL crashes due to the problematic open/close path. (b). As a result of (a), netdev_tx_reset_queue() is now explicitly required in freeze/restore path. Add netdev_tx_reset_queue() immediately after free_unused_bufs() invocation. (c). Fix missing resetting in virtnet_tx_resize(). virtnet_tx_resize() has lacked proper resetting since commit c8bd1f7 ("virtio_net: add support for Byte Queue Limits"). (d). Fix missing resetting in the XDP_SETUP_XSK_POOL path. Similar to (c), this path lacked proper resetting. Call netdev_tx_reset_queue() when virtqueue_reset() has actually recycled unused buffers. This patch series consists of six commits: [1/6]: Resolves (a) and (b). # also -stable 6.11.y [2/6]: Minor fix to make [4/6] streamlined. [3/6]: Prerequisite for (c). # also -stable 6.11.y [4/6]: Resolves (c) (incl. Prerequisite for (d)) # also -stable 6.11.y [5/6]: Preresuisite for (d). [6/6]: Resolves (d). Changes for v4: - move netdev_tx_reset_queue() out of free_unused_bufs() - submit to net, not net-next Changes for v3: - replace 'flushed' argument with 'recycle_done' Changes for v2: - add tx queue resetting for (b) to (d) above v3: https://lore.kernel.org/all/[email protected]/ v2: https://lore.kernel.org/all/[email protected]/ v1: https://lore.kernel.org/all/[email protected]/ [1]: ------------[ cut here ]------------ kernel BUG at lib/dynamic_queue_limits.c:99! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 UID: 0 PID: 1598 Comm: ip Tainted: G N 6.12.0net-next_main+ #2 Tainted: [N]=TEST Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), \ BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:dql_completed+0x26b/0x290 Code: b7 c2 49 89 e9 44 89 da 89 c6 4c 89 d7 e8 ed 17 47 00 58 65 ff 0d 4d 27 90 7e 0f 85 fd fe ff ff e8 ea 53 8d ff e9 f3 fe ff ff <0f> 0b 01 d2 44 89 d1 29 d1 ba 00 00 00 00 0f 48 ca e9 28 ff ff ff RSP: 0018:ffffc900002b0d08 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffff888102398c80 RCX: 0000000080190009 RDX: 0000000000000000 RSI: 000000000000006a RDI: 0000000000000000 RBP: ffff888102398c00 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000000000ca R11: 0000000000015681 R12: 0000000000000001 R13: ffffc900002b0d68 R14: ffff88811115e000 R15: ffff8881107aca40 FS: 00007f41ded69500(0000) GS:ffff888667dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556ccc2dc1a0 CR3: 0000000104fd8003 CR4: 0000000000772ef0 PKRU: 55555554 Call Trace: <IRQ> ? die+0x32/0x80 ? do_trap+0xd9/0x100 ? dql_completed+0x26b/0x290 ? dql_completed+0x26b/0x290 ? do_error_trap+0x6d/0xb0 ? dql_completed+0x26b/0x290 ? exc_invalid_op+0x4c/0x60 ? dql_completed+0x26b/0x290 ? asm_exc_invalid_op+0x16/0x20 ? dql_completed+0x26b/0x290 __free_old_xmit+0xff/0x170 [virtio_net] free_old_xmit+0x54/0xc0 [virtio_net] virtnet_poll+0xf4/0xe30 [virtio_net] ? __update_load_avg_cfs_rq+0x264/0x2d0 ? update_curr+0x35/0x260 ? reweight_entity+0x1be/0x260 __napi_poll.constprop.0+0x28/0x1c0 net_rx_action+0x329/0x420 ? enqueue_hrtimer+0x35/0x90 ? trace_hardirqs_on+0x1d/0x80 ? kvm_sched_clock_read+0xd/0x20 ? sched_clock+0xc/0x30 ? kvm_sched_clock_read+0xd/0x20 ? sched_clock+0xc/0x30 ? sched_clock_cpu+0xd/0x1a0 handle_softirqs+0x138/0x3e0 do_softirq.part.0+0x89/0xc0 </IRQ> <TASK> __local_bh_enable_ip+0xa7/0xb0 virtnet_open+0xc8/0x310 [virtio_net] __dev_open+0xfa/0x1b0 __dev_change_flags+0x1de/0x250 dev_change_flags+0x22/0x60 do_setlink.isra.0+0x2df/0x10b0 ? rtnetlink_rcv_msg+0x34f/0x3f0 ? netlink_rcv_skb+0x54/0x100 ? netlink_unicast+0x23e/0x390 ? netlink_sendmsg+0x21e/0x490 ? ____sys_sendmsg+0x31b/0x350 ? avc_has_perm_noaudit+0x67/0xf0 ? cred_has_capability.isra.0+0x75/0x110 ? __nla_validate_parse+0x5f/0xee0 ? __pfx___probestub_irq_enable+0x3/0x10 ? __create_object+0x5e/0x90 ? security_capable+0x3b/0x7�[I0 rtnl_newlink+0x784/0xaf0 ? avc_has_perm_noaudit+0x67/0xf0 ? cred_has_capability.isra.0+0x75/0x110 ? stack_depot_save_flags+0x24/0x6d0 ? __pfx_rtnl_newlink+0x10/0x10 rtnetlink_rcv_msg+0x34f/0x3f0 ? do_syscall_64+0x6c/0x180 ? entry_SYSCALL_64_after_hwframe+0x76/0x7e ? __pfx_rtnetlink_rcv_msg+0x10/0x10 netlink_rcv_skb+0x54/0x100 netlink_unicast+0x23e/0x390 netlink_sendmsg+0x21e/0x490 ____sys_sendmsg+0x31b/0x350 ? copy_msghdr_from_user+0x6d/0xa0 ___sys_sendmsg+0x86/0xd0 ? __pte_offset_map+0x17/0x160 ? preempt_count_add+0x69/0xa0 ? __call_rcu_common.constprop.0+0x147/0x610 ? preempt_count_add+0x69/0xa0 ? preempt_count_add+0x69/0xa0 ? _raw_spin_trylock+0x13/0x60 ? trace_hardirqs_on+0x1d/0x80 __sys_sendmsg+0x66/0xc0 do_syscall_64+0x6c/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f41defe5b34 Code: 15 e1 12 0f 00 f7 d8 64 89 02 b8 ff ff ff ff eb bf 0f 1f 44 00 00 f3 0f 1e fa 80 3d 35 95 0f 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 4c c3 0f 1f 00 55 48 89 e5 48 83 ec 20 89 55 RSP: 002b:00007ffe5336ecc8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f41defe5b34 RDX: 0000000000000000 RSI: 00007ffe5336ed30 RDI: 0000000000000003 RBP: 00007ffe5336eda0 R08: 0000000000000010 R09: 0000000000000001 R10: 00007ffe5336f6f9 R11: 0000000000000202 R12: 0000000000000003 R13: 0000000067452259 R14: 0000556ccc28b040 R15: 0000000000000000 </TASK> [...] ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

…ux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.13, part #2 - Fix confusion with implicitly-shifted MDCR_EL2 masks breaking SPE/TRBE initialization - Align nested page table walker with the intended memory attribute combining rules of the architecture - Prevent userspace from constraining the advertised ASID width, avoiding horrors of guest TLBIs not matching the intended context in hardware - Don't leak references on LPIs when insertion into the translation cache fails

The vmemmap's, which is used for RV64 with SPARSEMEM_VMEMMAP, page tables are populated using pmd (page middle directory) hugetables. However, the pmd allocation is not using the generic mechanism used by the VMA code (e.g. pmd_alloc()), or the RISC-V specific create_pgd_mapping()/alloc_pmd_late(). Instead, the vmemmap page table code allocates a page, and calls vmemmap_set_pmd(). This results in that the pmd ctor is *not* called, nor would it make sense to do so. Now, when tearing down a vmemmap page table pmd, the cleanup code would unconditionally, and incorrectly call the pmd dtor, which results in a crash (best case). This issue was found when running the HMM selftests: | tools/testing/selftests/mm# ./test_hmm.sh smoke | ... # when unloading the test_hmm.ko module | page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10915b | flags: 0x1000000000000000(node=0|zone=1) | raw: 1000000000000000 0000000000000000 dead000000000122 0000000000000000 | raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 | page dumped because: VM_BUG_ON_PAGE(ptdesc->pmd_huge_pte) | ------------[ cut here ]------------ | kernel BUG at include/linux/mm.h:3080! | Kernel BUG [#1] | Modules linked in: test_hmm(-) sch_fq_codel fuse drm drm_panel_orientation_quirks backlight dm_mod | CPU: 1 UID: 0 PID: 514 Comm: modprobe Tainted: G W 6.12.0-00982-gf2a4f1682d07 #2 | Tainted: [W]=WARN | Hardware name: riscv-virtio qemu/qemu, BIOS 2024.10 10/01/2024 | epc : remove_pgd_mapping+0xbec/0x1070 | ra : remove_pgd_mapping+0xbec/0x1070 | epc : ffffffff80010a68 ra : ffffffff80010a68 sp : ff20000000a73940 | gp : ffffffff827b2d88 tp : ff6000008785da40 t0 : ffffffff80fbce04 | t1 : 0720072007200720 t2 : 706d756420656761 s0 : ff20000000a73a50 | s1 : ff6000008915cff8 a0 : 0000000000000039 a1 : 0000000000000008 | a2 : ff600003fff0de20 a3 : 0000000000000000 a4 : 0000000000000000 | a5 : 0000000000000000 a6 : c0000000ffffefff a7 : ffffffff824469b8 | s2 : ff1c0000022456c0 s3 : ff1ffffffdbfffff s4 : ff6000008915c000 | s5 : ff6000008915c000 s6 : ff6000008915c000 s7 : ff1ffffffdc00000 | s8 : 0000000000000001 s9 : ff1ffffffdc00000 s10: ffffffff819a31f0 | s11: ffffffffffffffff t3 : ffffffff8000c950 t4 : ff60000080244f00 | t5 : ff60000080244000 t6 : ff20000000a73708 | status: 0000000200000120 badaddr: ffffffff80010a68 cause: 0000000000000003 | [<ffffffff80010a68>] remove_pgd_mapping+0xbec/0x1070 | [<ffffffff80fd238e>] vmemmap_free+0x14/0x1e | [<ffffffff8032e698>] section_deactivate+0x220/0x452 | [<ffffffff8032ef7e>] sparse_remove_section+0x4a/0x58 | [<ffffffff802f8700>] __remove_pages+0x7e/0xba | [<ffffffff803760d8>] memunmap_pages+0x2bc/0x3fe | [<ffffffff02a3ca28>] dmirror_device_remove_chunks+0x2ea/0x518 [test_hmm] | [<ffffffff02a3e026>] hmm_dmirror_exit+0x3e/0x1018 [test_hmm] | [<ffffffff80102c14>] __riscv_sys_delete_module+0x15a/0x2a6 | [<ffffffff80fd020c>] do_trap_ecall_u+0x1f2/0x266 | [<ffffffff80fde0a2>] _new_vmalloc_restore_context_a0+0xc6/0xd2 | Code: bf51 7597 0184 8593 76a5 854a 4097 0029 80e7 2c00 (9002) 7597 | ---[ end trace 0000000000000000 ]--- | Kernel panic - not syncing: Fatal exception in interrupt Add a check to avoid calling the pmd dtor, if the calling context is vmemmap_free(). Fixes: c75a74f ("riscv: mm: Add memory hotplugging support") Signed-off-by: Björn Töpel <[email protected]> Reviewed-by: Alexandre Ghiti <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]>

From v6.13 -> v6.14 the selftests kmod takes around 10s longer to run. Use KMOD_TIMEOUT Makefile cli variable to increase the default 165s timeout to 175s. Output: ok 1 selftests: kmod: kmod.sh real 2m47.077s user 0m0.062s sys 0m0.235s kdevops@dani-kmod:/data/selftests/kselftest/kselftest_install$ uname -a Linux dani-kmod 6.14.0 #3 SMP PREEMPT_DYNAMIC Fri Jun 27 18:28:16 UTC 2025 x86_64 GNU/Linux ok 1 selftests: kmod: kmod.sh real 2m41.456s user 0m0.068s sys 0m0.241s kdevops@dani-kmod:/data/selftests/kselftest/kselftest_install$ uname -a Linux dani-kmod 6.13.0 #2 SMP PREEMPT_DYNAMIC Fri Jun 27 17:13:42 UTC 2025 x86_64 GNU/Linux Signed-off-by: Daniel Gomez <[email protected]>

The commit under the Fixes tag added a netdev_assert_locked() in bnxt_free_ntp_fltrs(). The lock should be held during normal run-time but the assert will be triggered (see below) during bnxt_remove_one() which should not need the lock. The netdev is already unregistered by then. Fix it by calling netdev_assert_locked_or_invisible() which will not assert if the netdev is unregistered. WARNING: CPU: 5 PID: 2241 at ./include/net/netdev_lock.h:17 bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en] Modules linked in: rpcrdma rdma_cm iw_cm ib_cm configfs ib_core bnxt_en(-) bridge stp llc x86_pkg_temp_thermal xfs tg3 [last unloaded: bnxt_re] CPU: 5 UID: 0 PID: 2241 Comm: rmmod Tainted: G S W 6.16.0 #2 PREEMPT(voluntary) Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 RIP: 0010:bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en] Code: 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 8b 47 60 be ff ff ff ff 48 8d b8 28 0c 00 00 e8 d0 cf 41 c3 85 c0 0f 85 2e ff ff ff <0f> 0b e9 27 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffa92082387da0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9e5b593d8000 RCX: 0000000000000001 RDX: 0000000000000001 RSI: ffffffff83dc9a70 RDI: ffffffff83e1a1cf RBP: ffff9e5b593d8c80 R08: 0000000000000000 R09: ffffffff8373a2b3 R10: 000000008100009f R11: 0000000000000001 R12: 0000000000000001 R13: ffffffffc01c4478 R14: dead000000000122 R15: dead000000000100 FS: 00007f3a8a52c740(0000) GS:ffff9e631ad1c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055bb289419c8 CR3: 000000011274e001 CR4: 00000000003706f0 Call Trace: <TASK> bnxt_remove_one+0x57/0x180 [bnxt_en] pci_device_remove+0x39/0xc0 device_release_driver_internal+0xa5/0x130 driver_detach+0x42/0x90 bus_remove_driver+0x61/0xc0 pci_unregister_driver+0x38/0x90 bnxt_exit+0xc/0x7d0 [bnxt_en] Fixes: 004b500 ("eth: bnxt: remove most dependencies on RTNL") Reviewed-by: Pavan Chebbi <[email protected]> Signed-off-by: Michael Chan <[email protected]> Reviewed-by: Vadim Fedorenko <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Commit 3c7ac40 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler") introduced an IRQ lock inversion issue. Fix this lock inversion by changing the spin_lock_irq() calls into spin_lock_irqsave() calls in code that can be called either from interrupt context or from thread context. This patch fixes the following lockdep complaint: WARNING: possible irq lock inversion dependency detected 6.12.30-android16-5-maybe-dirty-4k #1 Tainted: G W OE -------------------------------------------------------- kworker/u28:0/12 just changed the state of lock: ffffff881e29dd60 (&hba->clk_gating.lock){-...}-{2:2}, at: ufshcd_release_scsi_cmd+0x60/0x110 but this lock took another, HARDIRQ-unsafe lock in the past: (shost->host_lock){+.+.}-{2:2} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(shost->host_lock); local_irq_disable(); lock(&hba->clk_gating.lock); lock(shost->host_lock); <Interrupt> lock(&hba->clk_gating.lock); *** DEADLOCK *** 4 locks held by kworker/u28:0/12: #0: ffffff8800ac6158 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x1bc/0x65c #1: ffffffc085c93d70 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1e4/0x65c #2: ffffff881e29c0e0 (&shost->scan_mutex){+.+.}-{3:3}, at: __scsi_add_device+0x74/0x120 #3: ffffff881960ea00 (&hwq->cq_lock){-...}-{2:2}, at: ufshcd_mcq_poll_cqe_lock+0x28/0x104 the shortest dependencies between 2nd lock and 1st lock: -> (shost->host_lock){+.+.}-{2:2} { HARDIRQ-ON-W at: lock_acquire+0x134/0x2b4 _raw_spin_lock+0x48/0x64 ufshcd_sl_intr+0x4c/0xa08 ufshcd_threaded_intr+0x70/0x12c irq_thread_fn+0x48/0xa8 irq_thread+0x130/0x1ec kthread+0x110/0x134 ret_from_fork+0x10/0x20 SOFTIRQ-ON-W at: lock_acquire+0x134/0x2b4 _raw_spin_lock+0x48/0x64 ufshcd_sl_intr+0x4c/0xa08 ufshcd_threaded_intr+0x70/0x12c irq_thread_fn+0x48/0xa8 irq_thread+0x130/0x1ec kthread+0x110/0x134 ret_from_fork+0x10/0x20 INITIAL USE at: lock_acquire+0x134/0x2b4 _raw_spin_lock+0x48/0x64 ufshcd_sl_intr+0x4c/0xa08 ufshcd_threaded_intr+0x70/0x12c irq_thread_fn+0x48/0xa8 irq_thread+0x130/0x1ec kthread+0x110/0x134 ret_from_fork+0x10/0x20 } ... key at: [<ffffffc085ba1a98>] scsi_host_alloc.__key+0x0/0x10 ... acquired at: _raw_spin_lock_irqsave+0x5c/0x80 __ufshcd_release+0x78/0x118 ufshcd_send_uic_cmd+0xe4/0x118 ufshcd_dme_set_attr+0x88/0x1c8 ufs_google_phy_initialization+0x68/0x418 [ufs] ufs_google_link_startup_notify+0x78/0x27c [ufs] ufshcd_link_startup+0x84/0x720 ufshcd_init+0xf3c/0x1330 ufshcd_pltfrm_init+0x728/0x7d8 ufs_google_probe+0x30/0x84 [ufs] platform_probe+0xa0/0xe0 really_probe+0x114/0x454 __driver_probe_device+0xa4/0x160 driver_probe_device+0x44/0x23c __driver_attach_async_helper+0x60/0xd4 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 -> (&hba->clk_gating.lock){-...}-{2:2} { IN-HARDIRQ-W at: lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 ufshcd_release_scsi_cmd+0x60/0x110 ufshcd_compl_one_cqe+0x2c0/0x3f4 ufshcd_mcq_poll_cqe_lock+0xb0/0x104 ufs_google_mcq_intr+0x80/0xa0 [ufs] __handle_irq_event_percpu+0x104/0x32c handle_irq_event+0x40/0x9c handle_fasteoi_irq+0x170/0x2e8 generic_handle_domain_irq+0x58/0x80 gic_handle_irq+0x48/0x104 call_on_irq_stack+0x3c/0x50 do_interrupt_handler+0x7c/0xd8 el1_interrupt+0x34/0x58 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x68/0x6c _raw_spin_unlock_irqrestore+0x3c/0x6c debug_object_assert_init+0x16c/0x21c __mod_timer+0x4c/0x48c schedule_timeout+0xd4/0x16c io_schedule_timeout+0x48/0x70 do_wait_for_common+0x100/0x194 wait_for_completion_io_timeout+0x48/0x6c blk_execute_rq+0x124/0x17c scsi_execute_cmd+0x18c/0x3f8 scsi_probe_and_add_lun+0x204/0xd74 __scsi_add_device+0xbc/0x120 ufshcd_async_scan+0x80/0x3c0 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 INITIAL USE at: lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 ufshcd_hold+0x34/0x14c ufshcd_send_uic_cmd+0x28/0x118 ufshcd_dme_set_attr+0x88/0x1c8 ufs_google_phy_initialization+0x68/0x418 [ufs] ufs_google_link_startup_notify+0x78/0x27c [ufs] ufshcd_link_startup+0x84/0x720 ufshcd_init+0xf3c/0x1330 ufshcd_pltfrm_init+0x728/0x7d8 ufs_google_probe+0x30/0x84 [ufs] platform_probe+0xa0/0xe0 really_probe+0x114/0x454 __driver_probe_device+0xa4/0x160 driver_probe_device+0x44/0x23c __driver_attach_async_helper+0x60/0xd4 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 } ... key at: [<ffffffc085ba6fe8>] ufshcd_init.__key+0x0/0x10 ... acquired at: mark_lock+0x1c4/0x224 __lock_acquire+0x438/0x2e1c lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 ufshcd_release_scsi_cmd+0x60/0x110 ufshcd_compl_one_cqe+0x2c0/0x3f4 ufshcd_mcq_poll_cqe_lock+0xb0/0x104 ufs_google_mcq_intr+0x80/0xa0 [ufs] __handle_irq_event_percpu+0x104/0x32c handle_irq_event+0x40/0x9c handle_fasteoi_irq+0x170/0x2e8 generic_handle_domain_irq+0x58/0x80 gic_handle_irq+0x48/0x104 call_on_irq_stack+0x3c/0x50 do_interrupt_handler+0x7c/0xd8 el1_interrupt+0x34/0x58 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x68/0x6c _raw_spin_unlock_irqrestore+0x3c/0x6c debug_object_assert_init+0x16c/0x21c __mod_timer+0x4c/0x48c schedule_timeout+0xd4/0x16c io_schedule_timeout+0x48/0x70 do_wait_for_common+0x100/0x194 wait_for_completion_io_timeout+0x48/0x6c blk_execute_rq+0x124/0x17c scsi_execute_cmd+0x18c/0x3f8 scsi_probe_and_add_lun+0x204/0xd74 __scsi_add_device+0xbc/0x120 ufshcd_async_scan+0x80/0x3c0 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 stack backtrace: CPU: 6 UID: 0 PID: 12 Comm: kworker/u28:0 Tainted: G W OE 6.12.30-android16-5-maybe-dirty-4k #1 ccd4020fe444bdf629efc3b86df6be920b8df7d0 Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Spacecraft board based on MALIBU (DT) Workqueue: async async_run_entry_fn Call trace: dump_backtrace+0xfc/0x17c show_stack+0x18/0x28 dump_stack_lvl+0x40/0xa0 dump_stack+0x18/0x24 print_irq_inversion_bug+0x2fc/0x304 mark_lock_irq+0x388/0x4fc mark_lock+0x1c4/0x224 __lock_acquire+0x438/0x2e1c lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 ufshcd_release_scsi_cmd+0x60/0x110 ufshcd_compl_one_cqe+0x2c0/0x3f4 ufshcd_mcq_poll_cqe_lock+0xb0/0x104 ufs_google_mcq_intr+0x80/0xa0 [ufs dd6f385554e109da094ab91d5f7be18625a2222a] __handle_irq_event_percpu+0x104/0x32c handle_irq_event+0x40/0x9c handle_fasteoi_irq+0x170/0x2e8 generic_handle_domain_irq+0x58/0x80 gic_handle_irq+0x48/0x104 call_on_irq_stack+0x3c/0x50 do_interrupt_handler+0x7c/0xd8 el1_interrupt+0x34/0x58 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x68/0x6c _raw_spin_unlock_irqrestore+0x3c/0x6c debug_object_assert_init+0x16c/0x21c __mod_timer+0x4c/0x48c schedule_timeout+0xd4/0x16c io_schedule_timeout+0x48/0x70 do_wait_for_common+0x100/0x194 wait_for_completion_io_timeout+0x48/0x6c blk_execute_rq+0x124/0x17c scsi_execute_cmd+0x18c/0x3f8 scsi_probe_and_add_lun+0x204/0xd74 __scsi_add_device+0xbc/0x120 ufshcd_async_scan+0x80/0x3c0 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 Cc: Neil Armstrong <[email protected]> Cc: André Draszik <[email protected]> Reviewed-by: Peter Wang <[email protected]> Fixes: 3c7ac40 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler") Signed-off-by: Bart Van Assche <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]>

…dlock When a user creates a dualpi2 qdisc it automatically sets a timer. This timer will run constantly and update the qdisc's probability field. The issue is that the timer acquires the qdisc root lock and runs in hardirq. The qdisc root lock is also acquired in dev.c whenever a packet arrives for this qdisc. Since the dualpi2 timer callback runs in hardirq, it may interrupt the packet processing running in softirq. If that happens and it runs on the same CPU, it will acquire the same lock and cause a deadlock. The following splat shows up when running a kernel compiled with lock debugging: [ +0.000224] WARNING: inconsistent lock state [ +0.000224] 6.16.0+ #10 Not tainted [ +0.000169] -------------------------------- [ +0.000029] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ +0.000000] ping/156 [HC0[0]:SC0[2]:HE1:SE0] takes: [ +0.000000] ffff897841242110 (&sch->root_lock_key){?.-.}-{3:3}, at: __dev_queue_xmit+0x86d/0x1140 [ +0.000000] {IN-HARDIRQ-W} state was registered at: [ +0.000000] lock_acquire.part.0+0xb6/0x220 [ +0.000000] _raw_spin_lock+0x31/0x80 [ +0.000000] dualpi2_timer+0x6f/0x270 [ +0.000000] __hrtimer_run_queues+0x1c5/0x360 [ +0.000000] hrtimer_interrupt+0x115/0x260 [ +0.000000] __sysvec_apic_timer_interrupt+0x6d/0x1a0 [ +0.000000] sysvec_apic_timer_interrupt+0x6e/0x80 [ +0.000000] asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ +0.000000] pv_native_safe_halt+0xf/0x20 [ +0.000000] default_idle+0x9/0x10 [ +0.000000] default_idle_call+0x7e/0x1e0 [ +0.000000] do_idle+0x1e8/0x250 [ +0.000000] cpu_startup_entry+0x29/0x30 [ +0.000000] rest_init+0x151/0x160 [ +0.000000] start_kernel+0x6f3/0x700 [ +0.000000] x86_64_start_reservations+0x24/0x30 [ +0.000000] x86_64_start_kernel+0xc8/0xd0 [ +0.000000] common_startup_64+0x13e/0x148 [ +0.000000] irq event stamp: 6884 [ +0.000000] hardirqs last enabled at (6883): [<ffffffffa75700b3>] neigh_resolve_output+0x223/0x270 [ +0.000000] hardirqs last disabled at (6882): [<ffffffffa7570078>] neigh_resolve_output+0x1e8/0x270 [ +0.000000] softirqs last enabled at (6880): [<ffffffffa757006b>] neigh_resolve_output+0x1db/0x270 [ +0.000000] softirqs last disabled at (6884): [<ffffffffa755b533>] __dev_queue_xmit+0x73/0x1140 [ +0.000000] other info that might help us debug this: [ +0.000000] Possible unsafe locking scenario: [ +0.000000] CPU0 [ +0.000000] ---- [ +0.000000] lock(&sch->root_lock_key); [ +0.000000] <Interrupt> [ +0.000000] lock(&sch->root_lock_key); [ +0.000000] *** DEADLOCK *** [ +0.000000] 4 locks held by ping/156: [ +0.000000] #0: ffff897842332e08 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0x41e/0xf40 [ +0.000000] #1: ffffffffa816f880 (rcu_read_lock){....}-{1:3}, at: ip_output+0x2c/0x190 [ +0.000000] #2: ffffffffa816f880 (rcu_read_lock){....}-{1:3}, at: ip_finish_output2+0xad/0x950 [ +0.000000] #3: ffffffffa816f840 (rcu_read_lock_bh){....}-{1:3}, at: __dev_queue_xmit+0x73/0x1140 I am able to reproduce it consistently when running the following: tc qdisc add dev lo handle 1: root dualpi2 ping -f 127.0.0.1 To fix it, make the timer run in softirq. Fixes: 320d031 ("sched: Struct definition and parsing of dualpi2 qdisc") Reviewed-by: Jamal Hadi Salim <[email protected]> Signed-off-by: Victor Nogueira <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

From v6.13 -> v6.14 the selftests kmod takes around 10s longer to run. Use KMOD_TIMEOUT Makefile cli variable to increase the default 165s timeout to 175s. Output: ok 1 selftests: kmod: kmod.sh real 2m47.077s user 0m0.062s sys 0m0.235s kdevops@dani-kmod:/data/selftests/kselftest/kselftest_install$ uname -a Linux dani-kmod 6.14.0 #3 SMP PREEMPT_DYNAMIC Fri Jun 27 18:28:16 UTC 2025 x86_64 GNU/Linux ok 1 selftests: kmod: kmod.sh real 2m41.456s user 0m0.068s sys 0m0.241s kdevops@dani-kmod:/data/selftests/kselftest/kselftest_install$ uname -a Linux dani-kmod 6.13.0 #2 SMP PREEMPT_DYNAMIC Fri Jun 27 17:13:42 UTC 2025 x86_64 GNU/Linux Signed-off-by: Daniel Gomez <[email protected]>

These iterations require the read lock, otherwise RCU lockdep will splat: ============================= WARNING: suspicious RCU usage 6.17.0-rc3-00014-g31419c045d64 #6 Tainted: G O ----------------------------- drivers/base/power/main.c:1333 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 5 locks held by rtcwake/547: #0: 00000000643ab418 (sb_writers#6){.+.+}-{0:0}, at: file_start_write+0x2b/0x3a #1: 0000000067a0ca88 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0x181/0x24b #2: 00000000631eac40 (kn->active#3){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x191/0x24b #3: 00000000609a1308 (system_transition_mutex){+.+.}-{4:4}, at: pm_suspend+0xaf/0x30b #4: 0000000060c0fdb0 (device_links_srcu){.+.+}-{0:0}, at: device_links_read_lock+0x75/0x98 stack backtrace: CPU: 0 UID: 0 PID: 547 Comm: rtcwake Tainted: G O 6.17.0-rc3-00014-g31419c045d64 #6 VOLUNTARY Tainted: [O]=OOT_MODULE Stack: 223721b3a80 6089eac6 00000001 00000001 ffffff00 6089eac6 00000535 6086e528 721b3ac0 6003c294 00000000 60031fc0 Call Trace: [<600407ed>] show_stack+0x10e/0x127 [<6003c294>] dump_stack_lvl+0x77/0xc6 [<6003c2fd>] dump_stack+0x1a/0x20 [<600bc2f8>] lockdep_rcu_suspicious+0x116/0x13e [<603d8ea1>] dpm_async_suspend_superior+0x117/0x17e [<603d980f>] device_suspend+0x528/0x541 [<603da24b>] dpm_suspend+0x1a2/0x267 [<603da837>] dpm_suspend_start+0x5d/0x72 [<600ca0c9>] suspend_devices_and_enter+0xab/0x736 [...] Add the fourth argument to the iteration to annotate this and avoid the splat. Fixes: 0679963 ("PM: sleep: Make async suspend handle suppliers like parents") Fixes: ed18738 ("PM: sleep: Make async resume handle consumers like children") Signed-off-by: Johannes Berg <[email protected]> Link: https://patch.msgid.link/20250826134348.aba79f6e6299.I9ecf55da46ccf33778f2c018a82e1819d815b348@changeid Signed-off-by: Rafael J. Wysocki <[email protected]>

With CONFIG_DEBUG_OBJECTS_TIMERS unloading hfcpci module leads to the following splat: [ 250.215892] ODEBUG: assert_init not available (active state 0) object: ffffffffc01a3dc0 object type: timer_list hint: 0x0 [ 250.217520] WARNING: CPU: 0 PID: 233 at lib/debugobjects.c:612 debug_print_object+0x1b6/0x2c0 [ 250.218775] Modules linked in: hfcpci(-) mISDN_core [ 250.219537] CPU: 0 UID: 0 PID: 233 Comm: rmmod Not tainted 6.17.0-rc2-g6f713187ac98 #2 PREEMPT(voluntary) [ 250.220940] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 250.222377] RIP: 0010:debug_print_object+0x1b6/0x2c0 [ 250.223131] Code: fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 75 4f 41 56 48 8b 14 dd a0 4e 01 9f 48 89 ee 48 c7 c7 20 46 01 9f e8 cb 84d [ 250.225805] RSP: 0018:ffff888015ea7c08 EFLAGS: 00010286 [ 250.226608] RAX: 0000000000000000 RBX: 0000000000000005 RCX: ffffffff9be93a95 [ 250.227708] RDX: 1ffff1100d945138 RSI: 0000000000000008 RDI: ffff88806ca289c0 [ 250.228993] RBP: ffffffff9f014a00 R08: 0000000000000001 R09: ffffed1002bd4f39 [ 250.230043] R10: ffff888015ea79cf R11: 0000000000000001 R12: 0000000000000001 [ 250.231185] R13: ffffffff9eea0520 R14: 0000000000000000 R15: ffff888015ea7cc8 [ 250.232454] FS: 00007f3208f01540(0000) GS:ffff8880caf5a000(0000) knlGS:0000000000000000 [ 250.233851] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 250.234856] CR2: 00007f32090a7421 CR3: 0000000004d63000 CR4: 00000000000006f0 [ 250.236117] Call Trace: [ 250.236599] <TASK> [ 250.236967] ? trace_irq_enable.constprop.0+0xd4/0x130 [ 250.237920] debug_object_assert_init+0x1f6/0x310 [ 250.238762] ? __pfx_debug_object_assert_init+0x10/0x10 [ 250.239658] ? __lock_acquire+0xdea/0x1c70 [ 250.240369] __try_to_del_timer_sync+0x69/0x140 [ 250.241172] ? __pfx___try_to_del_timer_sync+0x10/0x10 [ 250.242058] ? __timer_delete_sync+0xc6/0x120 [ 250.242842] ? lock_acquire+0x30/0x80 [ 250.243474] ? __timer_delete_sync+0xc6/0x120 [ 250.244262] __timer_delete_sync+0x98/0x120 [ 250.245015] HFC_cleanup+0x10/0x20 [hfcpci] [ 250.245704] __do_sys_delete_module+0x348/0x510 [ 250.246461] ? __pfx___do_sys_delete_module+0x10/0x10 [ 250.247338] do_syscall_64+0xc1/0x360 [ 250.247924] entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by initializing hfc_tl timer with DEFINE_TIMER macro. Also, use mod_timer instead of manual timeout update. Fixes: 87c5fa1 ("mISDN: Add different different timer settings for hfc-pci") Fixes: 175302f ("mISDN: hfcpci: Fix use-after-free bug in hfcpci_softirq") Signed-off-by: Vladimir Riabchun <[email protected]> Link: https://patch.msgid.link/aKiy2D_LiWpQ5kXq@vova-pc Signed-off-by: Jakub Kicinski <[email protected]>

If preparing a write bio fails then blk_zone_wplug_bio_work() calls bio_endio() with zwplug->lock held. If a device mapper driver is stacked on top of the zoned block device then this results in nested locking of zwplug->lock. The resulting lockdep complaint is a false positive because this is nested locking and not recursive locking. Suppress this false positive by calling blk_zone_wplug_bio_io_error() without holding zwplug->lock. This is safe because no code in blk_zone_wplug_bio_io_error() depends on zwplug->lock being held. This patch suppresses the following lockdep complaint: WARNING: possible recursive locking detected -------------------------------------------- kworker/3:0H/46 is trying to acquire lock: ffffff882968b830 (&zwplug->lock){-...}-{2:2}, at: blk_zone_write_plug_bio_endio+0x64/0x1f0 but task is already holding lock: ffffff88315bc230 (&zwplug->lock){-...}-{2:2}, at: blk_zone_wplug_bio_work+0x8c/0x48c other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&zwplug->lock); lock(&zwplug->lock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/3:0H/46: #0: ffffff8809486758 ((wq_completion)sdd_zwplugs){+.+.}-{0:0}, at: process_one_work+0x1bc/0x65c #1: ffffffc085de3d70 ((work_completion)(&zwplug->bio_work)){+.+.}-{0:0}, at: process_one_work+0x1e4/0x65c #2: ffffff88315bc230 (&zwplug->lock){-...}-{2:2}, at: blk_zone_wplug_bio_work+0x8c/0x48c stack backtrace: CPU: 3 UID: 0 PID: 46 Comm: kworker/3:0H Tainted: G W OE 6.12.38-android16-5-maybe-dirty-4k #1 8b362b6f76e3645a58cd27d86982bce10d150025 Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Spacecraft board based on MALIBU (DT) Workqueue: sdd_zwplugs blk_zone_wplug_bio_work Call trace: dump_backtrace+0xfc/0x17c show_stack+0x18/0x28 dump_stack_lvl+0x40/0xa0 dump_stack+0x18/0x24 print_deadlock_bug+0x38c/0x398 __lock_acquire+0x13e8/0x2e1c lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 blk_zone_write_plug_bio_endio+0x64/0x1f0 bio_endio+0x9c/0x240 __dm_io_complete+0x214/0x260 clone_endio+0xe8/0x214 bio_endio+0x218/0x240 blk_zone_wplug_bio_work+0x204/0x48c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 Cc: [email protected] Cc: Damien Le Moal <[email protected]> Cc: Christoph Hellwig <[email protected]> Fixes: dd291d7 ("block: Introduce zone write plugging") Signed-off-by: Bart Van Assche <[email protected]> Reviewed-by: Damien Le Moal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>

…ux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 changes for 6.17, take #2 - Correctly handle 'invariant' system registers for protected VMs - Improved handling of VNCR data aborts, including external aborts - Fixes for handling of FEAT_RAS for NV guests, providing a sane fault context during SEA injection and preventing the use of RASv1p1 fault injection hardware - Ensure that page table destruction when a VM is destroyed gives an opportunity to reschedule - Large fix to KVM's infrastructure for managing guest context loaded on the CPU, addressing issues where the output of AT emulation doesn't get reflected to the guest - Fix AT S12 emulation to actually perform stage-2 translation when necessary - Avoid attempting vLPI irqbypass when GICv4 has been explicitly disabled for a VM - Minor KVM + selftest fixes

In gicv5_irs_of_init_affinity() a WARN_ON() is triggered if: 1) a phandle in the "cpus" property does not correspond to a valid OF node 2 a CPU logical id does not exist for a given OF cpu_node #1 is a firmware bug and should be reported as such but does not warrant a WARN_ON() backtrace. #2 is not necessarily an error condition (eg a kernel can be booted with nr_cpus=X limiting the number of cores artificially) and therefore there is no reason to clutter the kernel log with WARN_ON() output when the condition is hit. Rework the IRS affinity parsing code to remove undue WARN_ON()s thus making it less noisy. Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/all/[email protected]

From v6.13 -> v6.14 the selftests kmod takes around 10s longer to run. Use KMOD_TIMEOUT Makefile cli variable to increase the default 165s timeout to 175s. Output: ok 1 selftests: kmod: kmod.sh real 2m47.077s user 0m0.062s sys 0m0.235s kdevops@dani-kmod:/data/selftests/kselftest/kselftest_install$ uname -a Linux dani-kmod 6.14.0 #3 SMP PREEMPT_DYNAMIC Fri Jun 27 18:28:16 UTC 2025 x86_64 GNU/Linux ok 1 selftests: kmod: kmod.sh real 2m41.456s user 0m0.068s sys 0m0.241s kdevops@dani-kmod:/data/selftests/kselftest/kselftest_install$ uname -a Linux dani-kmod 6.13.0 #2 SMP PREEMPT_DYNAMIC Fri Jun 27 17:13:42 UTC 2025 x86_64 GNU/Linux Signed-off-by: Daniel Gomez <[email protected]>

When the "proxy" option is enabled on a VXLAN device, the device will suppress ARP requests and IPv6 Neighbor Solicitation messages if it is able to reply on behalf of the remote host. That is, if a matching and valid neighbor entry is configured on the VXLAN device whose MAC address is not behind the "any" remote (0.0.0.0 / ::). The code currently assumes that the FDB entry for the neighbor's MAC address points to a valid remote destination, but this is incorrect if the entry is associated with an FDB nexthop group. This can result in a NPD [1][3] which can be reproduced using [2][4]. Fix by checking that the remote destination exists before dereferencing it. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 4 UID: 0 PID: 365 Comm: arping Not tainted 6.17.0-rc2-virtme-g2a89cb21162c #2 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014 RIP: 0010:vxlan_xmit+0xb58/0x15f0 [...] Call Trace: <TASK> dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 packet_sendmsg+0x113a/0x1850 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] #!/bin/bash ip address add 192.0.2.1/32 dev lo ip nexthop add id 1 via 192.0.2.2 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 4789 proxy ip neigh add 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 arping -b -c 1 -s 192.0.2.1 -I vx0 192.0.2.3 [3] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 13 UID: 0 PID: 372 Comm: ndisc6 Not tainted 6.17.0-rc2-virtmne-g6ee90cb26014 #3 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1v996), BIOS 1.17.0-4.fc41 04/01/2x014 RIP: 0010:vxlan_xmit+0x803/0x1600 [...] Call Trace: <TASK> dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 ip6_finish_output2+0x210/0x6c0 ip6_finish_output+0x1af/0x2b0 ip6_mr_output+0x92/0x3e0 ip6_send_skb+0x30/0x90 rawv6_sendmsg+0xe6e/0x12e0 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f383422ec77 [4] #!/bin/bash ip address add 2001:db8:1::1/128 dev lo ip nexthop add id 1 via 2001:db8:1::1 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 2001:db8:1::1 dstport 4789 proxy ip neigh add 2001:db8:1::3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 ndisc6 -r 1 -s 2001:db8:1::1 -w 1 2001:db8:1::3 vx0 Fixes: 1274e1c ("vxlan: ecmp support for mac fdb entries") Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Nikolay Aleksandrov <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Ido Schimmel says: ==================== vxlan: Fix NPDs when using nexthop objects With FDB nexthop groups, VXLAN FDB entries do not necessarily point to a remote destination but rather to an FDB nexthop group. This means that first_remote_{rcu,rtnl}() can return NULL and a few places in the driver were not ready for that, resulting in NULL pointer dereferences. Patches #1-#2 fix these NPDs. Note that vxlan_fdb_find_uc() still dereferences the remote returned by first_remote_rcu() without checking that it is not NULL, but this function is only invoked by a single driver which vetoes the creation of FDB nexthop groups. I will patch this in net-next to make the code less fragile. Patch #3 adds a selftests which exercises these code paths and tests basic Tx functionality with FDB nexthop groups. I verified that the test crashes the kernel without the first two patches. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

When transmitting a PTP frame which is timestamp using 2 step, the following warning appears if CONFIG_PROVE_LOCKING is enabled: ============================= [ BUG: Invalid wait context ] 6.17.0-rc1-00326-ge6160462704e torvalds#427 Not tainted ----------------------------- ptp4l/119 is trying to lock: c2a44ed4 (&vsc8531->ts_lock){+.+.}-{3:3}, at: vsc85xx_txtstamp+0x50/0xac other info that might help us debug this: context-{4:4} 4 locks held by ptp4l/119: #0: c145f068 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x58/0x1440 #1: c29df974 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x5c4/0x1440 #2: c2aaaad0 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x108/0x350 #3: c2aac170 (&lan966x->tx_lock){+.-.}-{2:2}, at: lan966x_port_xmit+0xd0/0x350 stack backtrace: CPU: 0 UID: 0 PID: 119 Comm: ptp4l Not tainted 6.17.0-rc1-00326-ge6160462704e torvalds#427 NONE Hardware name: Generic DT based system Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x7c/0xac dump_stack_lvl from __lock_acquire+0x8e8/0x29dc __lock_acquire from lock_acquire+0x108/0x38c lock_acquire from __mutex_lock+0xb0/0xe78 __mutex_lock from mutex_lock_nested+0x1c/0x24 mutex_lock_nested from vsc85xx_txtstamp+0x50/0xac vsc85xx_txtstamp from lan966x_fdma_xmit+0xd8/0x3a8 lan966x_fdma_xmit from lan966x_port_xmit+0x1bc/0x350 lan966x_port_xmit from dev_hard_start_xmit+0xc8/0x2c0 dev_hard_start_xmit from sch_direct_xmit+0x8c/0x350 sch_direct_xmit from __dev_queue_xmit+0x680/0x1440 __dev_queue_xmit from packet_sendmsg+0xfa4/0x1568 packet_sendmsg from __sys_sendto+0x110/0x19c __sys_sendto from sys_send+0x18/0x20 sys_send from ret_fast_syscall+0x0/0x1c Exception stack(0xf0b05fa8 to 0xf0b05ff0) 5fa0: 00000001 0000000 0000000 0004b47a 0000003a 00000000 5fc0: 00000001 0000000 00000000 00000121 0004af58 00044874 00000000 00000000 5fe0: 00000001 bee9d420 00025a10 b6e75c7c So, instead of using the ts_lock for tx_queue, use the spinlock that skb_buff_head has. Reviewed-by: Vadim Fedorenko <[email protected]> Fixes: 7d272e6 ("net: phy: mscc: timestamping and PHC support") Signed-off-by: Horatiu Vultur <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

From v6.13 -> v6.14 the selftests kmod takes around 10s longer to run. Use KMOD_TIMEOUT Makefile cli variable to increase the default 165s timeout to 175s. Output: ok 1 selftests: kmod: kmod.sh real 2m47.077s user 0m0.062s sys 0m0.235s kdevops@dani-kmod:/data/selftests/kselftest/kselftest_install$ uname -a Linux dani-kmod 6.14.0 #3 SMP PREEMPT_DYNAMIC Fri Jun 27 18:28:16 UTC 2025 x86_64 GNU/Linux ok 1 selftests: kmod: kmod.sh real 2m41.456s user 0m0.068s sys 0m0.241s kdevops@dani-kmod:/data/selftests/kselftest/kselftest_install$ uname -a Linux dani-kmod 6.13.0 #2 SMP PREEMPT_DYNAMIC Fri Jun 27 17:13:42 UTC 2025 x86_64 GNU/Linux Signed-off-by: Daniel Gomez <[email protected]>

The commit ced17ee ("Revert "virtio: reject shm region if length is zero"") exposes the following DAX page fault bug (this fix the failure that getting shm region alway returns false because of zero length): The commit 21aa65b ("mm: remove callers of pfn_t functionality") handles the DAX physical page address incorrectly: the removed macro 'phys_to_pfn_t()' should be replaced with 'PHYS_PFN()'. [ 1.390321] BUG: unable to handle page fault for address: ffffd3fb40000008 [ 1.390875] #PF: supervisor read access in kernel mode [ 1.391257] #PF: error_code(0x0000) - not-present page [ 1.391509] PGD 0 P4D 0 [ 1.391626] Oops: Oops: 0000 [#1] SMP NOPTI [ 1.391806] CPU: 6 UID: 1000 PID: 162 Comm: weston Not tainted 6.17.0-rc3-WSL2-STABLE #2 PREEMPT(none) [ 1.392361] RIP: 0010:dax_to_folio+0x14/0x60 [ 1.392653] Code: 52 c9 c3 00 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 c1 ef 05 48 c1 e7 06 48 03 3d 34 b5 31 01 <48> 8b 57 08 48 89 f8 f6 c2 01 75 2b 66 90 c3 cc cc cc cc f7 c7 ff [ 1.393727] RSP: 0000:ffffaf7d04407aa8 EFLAGS: 00010086 [ 1.394003] RAX: 000000a000000000 RBX: ffffaf7d04407bb0 RCX: 0000000000000000 [ 1.394524] RDX: ffffd17b40000008 RSI: 0000000000000083 RDI: ffffd3fb40000000 [ 1.394967] RBP: 0000000000000011 R08: 000000a000000000 R09: 0000000000000000 [ 1.395400] R10: 0000000000001000 R11: ffffaf7d04407c10 R12: 0000000000000000 [ 1.395806] R13: ffffa020557be9c0 R14: 0000014000000001 R15: 0000725970e94000 [ 1.396268] FS: 000072596d6d2ec0(0000) GS:ffffa0222dc59000(0000) knlGS:0000000000000000 [ 1.396715] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.397100] CR2: ffffd3fb40000008 CR3: 000000011579c005 CR4: 0000000000372ef0 [ 1.397518] Call Trace: [ 1.397663] <TASK> [ 1.397900] dax_insert_entry+0x13b/0x390 [ 1.398179] dax_fault_iter+0x2a5/0x6c0 [ 1.398443] dax_iomap_pte_fault+0x193/0x3c0 [ 1.398750] __fuse_dax_fault+0x8b/0x270 [ 1.398997] ? vm_mmap_pgoff+0x161/0x210 [ 1.399175] __do_fault+0x30/0x180 [ 1.399360] do_fault+0xc4/0x550 [ 1.399547] __handle_mm_fault+0x8e3/0xf50 [ 1.399731] ? do_syscall_64+0x72/0x1e0 [ 1.399958] handle_mm_fault+0x192/0x2f0 [ 1.400204] do_user_addr_fault+0x20e/0x700 [ 1.400418] exc_page_fault+0x66/0x150 [ 1.400602] asm_exc_page_fault+0x26/0x30 [ 1.400831] RIP: 0033:0x72596d1bf703 [ 1.401076] Code: 31 f6 45 31 e4 48 8d 15 b3 73 00 00 e8 06 03 00 00 8b 83 68 01 00 00 e9 8e fa ff ff 0f 1f 00 48 8b 44 24 08 4c 89 ee 48 89 df <c7> 00 21 43 34 12 e8 72 09 00 00 e9 6a fa ff ff 0f 1f 44 00 00 e8 [ 1.402172] RSP: 002b:00007ffc350f6dc0 EFLAGS: 00010202 [ 1.402488] RAX: 0000725970e94000 RBX: 00005b7c642c2560 RCX: 0000725970d359a7 [ 1.402898] RDX: 0000000000000003 RSI: 00007ffc350f6dc0 RDI: 00005b7c642c2560 [ 1.403284] RBP: 00007ffc350f6e90 R08: 000000000000000d R09: 0000000000000000 [ 1.403634] R10: 00007ffc350f6dd8 R11: 0000000000000246 R12: 0000000000000001 [ 1.404078] R13: 00007ffc350f6dc0 R14: 0000725970e29ce0 R15: 0000000000000003 [ 1.404450] </TASK> [ 1.404570] Modules linked in: [ 1.404821] CR2: ffffd3fb40000008 [ 1.405029] ---[ end trace 0000000000000000 ]--- [ 1.405323] RIP: 0010:dax_to_folio+0x14/0x60 [ 1.405556] Code: 52 c9 c3 00 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 c1 ef 05 48 c1 e7 06 48 03 3d 34 b5 31 01 <48> 8b 57 08 48 89 f8 f6 c2 01 75 2b 66 90 c3 cc cc cc cc f7 c7 ff [ 1.406639] RSP: 0000:ffffaf7d04407aa8 EFLAGS: 00010086 [ 1.406910] RAX: 000000a000000000 RBX: ffffaf7d04407bb0 RCX: 0000000000000000 [ 1.407379] RDX: ffffd17b40000008 RSI: 0000000000000083 RDI: ffffd3fb40000000 [ 1.407800] RBP: 0000000000000011 R08: 000000a000000000 R09: 0000000000000000 [ 1.408246] R10: 0000000000001000 R11: ffffaf7d04407c10 R12: 0000000000000000 [ 1.408666] R13: ffffa020557be9c0 R14: 0000014000000001 R15: 0000725970e94000 [ 1.409170] FS: 000072596d6d2ec0(0000) GS:ffffa0222dc59000(0000) knlGS:0000000000000000 [ 1.409608] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.409977] CR2: ffffd3fb40000008 CR3: 000000011579c005 CR4: 0000000000372ef0 [ 1.410437] Kernel panic - not syncing: Fatal exception [ 1.410857] Kernel Offset: 0xc000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Fixes: 21aa65b ("mm: remove callers of pfn_t functionality") Signed-off-by: Haiyue Wang <[email protected]> Link: https://lore.kernel.org/[email protected] Acked-by: David Hildenbrand <[email protected]> Reviewed-by: Miklos Szeredi <[email protected]> Signed-off-by: Christian Brauner <[email protected]>

Problem description =================== Lockdep reports a possible circular locking dependency (AB/BA) between &pl->state_mutex and &phy->lock, as follows. phylink_resolve() // acquires &pl->state_mutex -> phylink_major_config() -> phy_config_inband() // acquires &pl->phydev->lock whereas all the other call sites where &pl->state_mutex and &pl->phydev->lock have the locking scheme reversed. Everywhere else, &pl->phydev->lock is acquired at the top level, and &pl->state_mutex at the lower level. A clear example is phylink_bringup_phy(). The outlier is the newly introduced phy_config_inband() and the existing lock order is the correct one. To understand why it cannot be the other way around, it is sufficient to consider phylink_phy_change(), phylink's callback from the PHY device's phy->phy_link_change() virtual method, invoked by the PHY state machine. phy_link_up() and phy_link_down(), the (indirect) callers of phylink_phy_change(), are called with &phydev->lock acquired. Then phylink_phy_change() acquires its own &pl->state_mutex, to serialize changes made to its pl->phy_state and pl->link_config. So all other instances of &pl->state_mutex and &phydev->lock must be consistent with this order. Problem impact ============== I think the kernel runs a serious deadlock risk if an existing phylink_resolve() thread, which results in a phy_config_inband() call, is concurrent with a phy_link_up() or phy_link_down() call, which will deadlock on &pl->state_mutex in phylink_phy_change(). Practically speaking, the impact may be limited by the slow speed of the medium auto-negotiation protocol, which makes it unlikely for the current state to still be unresolved when a new one is detected, but I think the problem is there. Nonetheless, the problem was discovered using lockdep. Proposed solution ================= Practically speaking, the phy_config_inband() requirement of having phydev->lock acquired must transfer to the caller (phylink is the only caller). There, it must bubble up until immediately before &pl->state_mutex is acquired, for the cases where that takes place. Solution details, considerations, notes ======================================= This is the phy_config_inband() call graph: sfp_upstream_ops :: connect_phy() | v phylink_sfp_connect_phy() | v phylink_sfp_config_phy() | | sfp_upstream_ops :: module_insert() | | | v | phylink_sfp_module_insert() | | | | sfp_upstream_ops :: module_start() | | | | | v | | phylink_sfp_module_start() | | | | v v | phylink_sfp_config_optical() phylink_start() | | | phylink_resume() v v | | phylink_sfp_set_config() | | | v v v phylink_mac_initial_config() | phylink_resolve() | | phylink_ethtool_ksettings_set() v v v phylink_major_config() | v phy_config_inband() phylink_major_config() caller #1, phylink_mac_initial_config(), does not acquire &pl->state_mutex nor do its callers. It must acquire &pl->phydev->lock prior to calling phylink_major_config(). phylink_major_config() caller #2, phylink_resolve() acquires &pl->state_mutex, thus also needs to acquire &pl->phydev->lock. phylink_major_config() caller #3, phylink_ethtool_ksettings_set(), is completely uninteresting, because it only calls phylink_major_config() if pl->phydev is NULL (otherwise it calls phy_ethtool_ksettings_set()). We need to change nothing there. Other solutions =============== The lock inversion between &pl->state_mutex and &pl->phydev->lock has occurred at least once before, as seen in commit c718af2 ("net: phylink: fix ethtool -A with attached PHYs"). The solution there was to simply not call phy_set_asym_pause() under the &pl->state_mutex. That cannot be extended to our case though, where the phy_config_inband() call is much deeper inside the &pl->state_mutex section. Fixes: 5fd0f1a ("net: phylink: add negotiation of in-band capabilities") Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Russell King (Oracle) <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

5da3d94 ("PCI: mvebu: Use for_each_of_range() iterator for parsing "ranges"") simplified code by using the for_each_of_range() iterator, but it broke PCI enumeration on Turris Omnia (and probably other mvebu targets). Issue #1: To determine range.flags, of_pci_range_parser_one() uses bus->get_flags(), which resolves to of_bus_pci_get_flags(), which already returns an IORESOURCE bit field, and NOT the original flags from the "ranges" resource. Then mvebu_get_tgt_attr() attempts the very same conversion again. Remove the misinterpretation of range.flags in mvebu_get_tgt_attr(), to restore the intended behavior. Issue #2: The driver needs target and attributes, which are encoded in the raw address values of the "/soc/pcie/ranges" resource. According to of_pci_range_parser_one(), the raw values are stored in range.bus_addr and range.parent_bus_addr, respectively. range.cpu_addr is a translated version of range.parent_bus_addr, and not relevant here. Use the correct range structure member, to extract target and attributes. This restores the intended behavior. Fixes: 5da3d94 ("PCI: mvebu: Use for_each_of_range() iterator for parsing "ranges"") Reported-by: Jan Palus <[email protected]> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220479 Signed-off-by: Klaus Kudielka <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Tested-by: Tony Dinh <[email protected]> Tested-by: Jan Palus <[email protected]> Link: https://patch.msgid.link/[email protected]

From v6.13 -> v6.14 the selftests kmod takes around 10s longer to run. Use KMOD_TIMEOUT Makefile cli variable to increase the default 165s timeout to 175s. Output: ok 1 selftests: kmod: kmod.sh real 2m47.077s user 0m0.062s sys 0m0.235s kdevops@dani-kmod:/data/selftests/kselftest/kselftest_install$ uname -a Linux dani-kmod 6.14.0 #3 SMP PREEMPT_DYNAMIC Fri Jun 27 18:28:16 UTC 2025 x86_64 GNU/Linux ok 1 selftests: kmod: kmod.sh real 2m41.456s user 0m0.068s sys 0m0.241s kdevops@dani-kmod:/data/selftests/kselftest/kselftest_install$ uname -a Linux dani-kmod 6.13.0 #2 SMP PREEMPT_DYNAMIC Fri Jun 27 17:13:42 UTC 2025 x86_64 GNU/Linux Signed-off-by: Daniel Gomez <[email protected]>

syzkaller has caught us red-handed once more, this time nesting regular spinlocks behind raw spinlocks: ============================= [ BUG: Invalid wait context ] 6.16.0-rc3-syzkaller-g7b8346bd9fce #0 Not tainted ----------------------------- syz.0.29/3743 is trying to lock: a3ff80008e2e9e18 (&xa->xa_lock#20){....}-{3:3}, at: vgic_put_irq+0xb4/0x190 arch/arm64/kvm/vgic/vgic.c:137 other info that might help us debug this: context-{5:5} 3 locks held by syz.0.29/3743: #0: a3ff80008e2e90a8 (&kvm->slots_lock){+.+.}-{4:4}, at: kvm_vgic_destroy+0x50/0x624 arch/arm64/kvm/vgic/vgic-init.c:499 #1: a3ff80008e2e9fa0 (&kvm->arch.config_lock){+.+.}-{4:4}, at: kvm_vgic_destroy+0x5c/0x624 arch/arm64/kvm/vgic/vgic-init.c:500 #2: 58f0000021be1428 (&vgic_cpu->ap_list_lock){....}-{2:2}, at: vgic_flush_pending_lpis+0x3c/0x31c arch/arm64/kvm/vgic/vgic.c:150 stack backtrace: CPU: 0 UID: 0 PID: 3743 Comm: syz.0.29 Not tainted 6.16.0-rc3-syzkaller-g7b8346bd9fce #0 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:466 (C) __dump_stack+0x30/0x40 lib/dump_stack.c:94 dump_stack_lvl+0xd8/0x12c lib/dump_stack.c:120 dump_stack+0x1c/0x28 lib/dump_stack.c:129 print_lock_invalid_wait_context kernel/locking/lockdep.c:4833 [inline] check_wait_context kernel/locking/lockdep.c:4905 [inline] __lock_acquire+0x978/0x299c kernel/locking/lockdep.c:5190 lock_acquire+0x14c/0x2e0 kernel/locking/lockdep.c:5871 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x5c/0x7c kernel/locking/spinlock.c:162 vgic_put_irq+0xb4/0x190 arch/arm64/kvm/vgic/vgic.c:137 vgic_flush_pending_lpis+0x24c/0x31c arch/arm64/kvm/vgic/vgic.c:158 __kvm_vgic_vcpu_destroy+0x44/0x500 arch/arm64/kvm/vgic/vgic-init.c:455 kvm_vgic_destroy+0x100/0x624 arch/arm64/kvm/vgic/vgic-init.c:505 kvm_arch_destroy_vm+0x80/0x138 arch/arm64/kvm/arm.c:244 kvm_destroy_vm virt/kvm/kvm_main.c:1308 [inline] kvm_put_kvm+0x800/0xff8 virt/kvm/kvm_main.c:1344 kvm_vm_release+0x58/0x78 virt/kvm/kvm_main.c:1367 __fput+0x4ac/0x980 fs/file_table.c:465 ____fput+0x20/0x58 fs/file_table.c:493 task_work_run+0x1bc/0x254 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] do_notify_resume+0x1b4/0x270 arch/arm64/kernel/entry-common.c:151 exit_to_user_mode_prepare arch/arm64/kernel/entry-common.c:169 [inline] exit_to_user_mode arch/arm64/kernel/entry-common.c:178 [inline] el0_svc+0xb4/0x160 arch/arm64/kernel/entry-common.c:768 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 This is of course no good, but is at odds with how LPI refcounts are managed. Solve the locking mess by deferring the release of unreferenced LPIs after the ap_list_lock is released. Mark these to-be-released LPIs specially to avoid racing with vgic_put_irq() and causing a double-free. Since references can only be taken on LPIs with a nonzero refcount, extending the lifetime of freed LPIs is still safe. Reviewed-by: Marc Zyngier <[email protected]> Reported-by: [email protected] Closes: https://lore.kernel.org/kvmarm/[email protected]/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Oliver Upton <[email protected]>

…ostcopy When you run a KVM guest with vhost-net and migrate that guest to another host, and you immediately enable postcopy after starting the migration, there is a big chance that the network connection of the guest won't work anymore on the destination side after the migration. With a debug kernel v6.16.0, there is also a call trace that looks like this: FAULT_FLAG_ALLOW_RETRY missing 881 CPU: 6 UID: 0 PID: 549 Comm: kworker/6:2 Kdump: loaded Not tainted 6.16.0 #56 NONE Hardware name: IBM 3931 LA1 400 (LPAR) Workqueue: events irqfd_inject [kvm] Call Trace: [<00003173cbecc634>] dump_stack_lvl+0x104/0x168 [<00003173cca69588>] handle_userfault+0xde8/0x1310 [<00003173cc756f0c>] handle_pte_fault+0x4fc/0x760 [<00003173cc759212>] __handle_mm_fault+0x452/0xa00 [<00003173cc7599ba>] handle_mm_fault+0x1fa/0x6a0 [<00003173cc73409a>] __get_user_pages+0x4aa/0xba0 [<00003173cc7349e8>] get_user_pages_remote+0x258/0x770 [<000031734be6f052>] get_map_page+0xe2/0x190 [kvm] [<000031734be6f910>] adapter_indicators_set+0x50/0x4a0 [kvm] [<000031734be7f674>] set_adapter_int+0xc4/0x170 [kvm] [<000031734be2f268>] kvm_set_irq+0x228/0x3f0 [kvm] [<000031734be27000>] irqfd_inject+0xd0/0x150 [kvm] [<00003173cc00c9ec>] process_one_work+0x87c/0x1490 [<00003173cc00dda6>] worker_thread+0x7a6/0x1010 [<00003173cc02dc36>] kthread+0x3b6/0x710 [<00003173cbed2f0c>] __ret_from_fork+0xdc/0x7f0 [<00003173cdd737ca>] ret_from_fork+0xa/0x30 3 locks held by kworker/6:2/549: #0: 00000000800bc958 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x7ee/0x1490 #1: 000030f3d527fbd0 ((work_completion)(&irqfd->inject)){+.+.}-{0:0}, at: process_one_work+0x81c/0x1490 #2: 00000000f99862b0 (&mm->mmap_lock){++++}-{3:3}, at: get_map_page+0xa8/0x190 [kvm] The "FAULT_FLAG_ALLOW_RETRY missing" indicates that handle_userfaultfd() saw a page fault request without ALLOW_RETRY flag set, hence userfaultfd cannot remotely resolve it (because the caller was asking for an immediate resolution, aka, FAULT_FLAG_NOWAIT, while remote faults can take time). With that, get_map_page() failed and the irq was lost. We should not be strictly in an atomic environment here and the worker should be sleepable (the call is done during an ioctl from userspace), so we can allow adapter_indicators_set() to just sleep waiting for the remote fault instead. Link: https://issues.redhat.com/browse/RHEL-42486 Signed-off-by: Peter Xu <[email protected]> [thuth: Assembled patch description and fixed some cosmetical issues] Signed-off-by: Thomas Huth <[email protected]> Reviewed-by: Claudio Imbrenda <[email protected]> Acked-by: Janosch Frank <[email protected]> Fixes: f654706 ("KVM: s390/interrupt: do not pin adapter interrupt pages") [frankja: Added fixes tag] Signed-off-by: Janosch Frank <[email protected]>

From v6.13 -> v6.14 the selftests kmod takes around 10s longer to run. Use KMOD_TIMEOUT Makefile cli variable to increase the default 165s timeout to 175s. Output: ok 1 selftests: kmod: kmod.sh real 2m47.077s user 0m0.062s sys 0m0.235s kdevops@dani-kmod:/data/selftests/kselftest/kselftest_install$ uname -a Linux dani-kmod 6.14.0 #3 SMP PREEMPT_DYNAMIC Fri Jun 27 18:28:16 UTC 2025 x86_64 GNU/Linux ok 1 selftests: kmod: kmod.sh real 2m41.456s user 0m0.068s sys 0m0.241s kdevops@dani-kmod:/data/selftests/kselftest/kselftest_install$ uname -a Linux dani-kmod 6.13.0 #2 SMP PREEMPT_DYNAMIC Fri Jun 27 17:13:42 UTC 2025 x86_64 GNU/Linux Signed-off-by: Daniel Gomez <[email protected]>

Dummy commit

0a6f6e1

modules-kpd-app bot added V1 merge-conflict modules-next new labels Oct 3, 2024

modules-kpd-app bot force-pushed the modules-next_base branch 2 times, most recently from 068d2a6 to f568851 Compare October 19, 2024 22:11

modules-kpd-app bot added handled-elsewhere and removed merge-conflict new labels Oct 19, 2024

modules-kpd-app bot closed this Oct 19, 2024

modules-kpd-app bot deleted the series/893576=>modules-next branch October 19, 2024 22:12

mcgrof pushed a commit that referenced this pull request Dec 4, 2024

Merge tag 'kvm-riscv-6.13-2' of https://github.com/kvm-riscv/linux in…

4d911c7

…to HEAD KVM/riscv changes for 6.13 part #2 - Svade and Svadu extension support for Host and Guest/VM

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Modules changes for v6.12-rc1 #2

Modules changes for v6.12-rc1 #2

Uh oh!

modules-kpd-app bot commented Oct 3, 2024

Uh oh!

modules-kpd-app bot commented Oct 3, 2024

Uh oh!

modules-kpd-app bot commented Oct 19, 2024

Uh oh!

Uh oh!

Modules changes for v6.12-rc1 #2

Modules changes for v6.12-rc1 #2

Uh oh!

Conversation

modules-kpd-app bot commented Oct 3, 2024

Uh oh!

modules-kpd-app bot commented Oct 3, 2024

Uh oh!

modules-kpd-app bot commented Oct 19, 2024

Uh oh!

Uh oh!