Thanks to visit codestin.com
Credit goes to github.com

Skip to content

Buggy USB device #151

New issue
New issue
Open
Open
Buggy USB device#151
@curiousercreative

Description

@curiousercreative
curiousercreative
opened on Jun 14, 2022

Hello, apologies if this isn't the proper channel for report. This is a CFast2.0 USB3 card reader. These dmesg logs are when attempting to read and then I unmount/mount in there, it doesn't do that by itself. Without looking at dmesg, you'd just think the reader was extremely "bursty". It'll read at ~400MB/s for 10-15 seconds and then not respond for 30 seconds, but without a fixed cadence of how long it'll read for versus how long it'll hang for.

Hardware diagram:
HP Z840 <=> GC-MAPLE RIDGE USB controller <=> Launch keyboard USB-C <=> Lexar card reader

$ uname -a
Linux shredder-curiouser 5.17.5-76051705-generic #202204271406~1653440576~22.04~6277a18 SMP PREEMPT Wed May 25 01 x86_64 x86_64 x86_64 GNU/Linux

$ cat /etc/os-release
NAME="Pop!_OS"
VERSION="22.04 LTS"
ID=pop
ID_LIKE="ubuntu debian"
PRETTY_NAME="Pop!_OS 22.04 LTS"
VERSION_ID="22.04"
HOME_URL="https://pop.system76.com"
SUPPORT_URL="https://support.system76.com"
BUG_REPORT_URL="https://github.com/pop-os/pop/issues"
PRIVACY_POLICY_URL="https://system76.com/privacy"
VERSION_CODENAME=jammy
UBUNTU_CODENAME=jammy
LOGO=distributor-logo-pop-os

$ sudo dmesg
[10338.920610] usb 6-1.2: USB disconnect, device number 3
[10370.078811] pcieport 0000:80:03.2: PME: Spurious native interrupt!
[10370.362433] usb 6-1.2: new SuperSpeed USB device number 4 using xhci_hcd
[10370.382941] usb 6-1.2: New USB device found, idVendor=05dc, idProduct=ba04, bcdDevice= 4.08
[10370.382945] usb 6-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[10370.382947] usb 6-1.2: Product: WorkflowCR1
[10370.382949] usb 6-1.2: Manufacturer: Lexar
[10370.382950] usb 6-1.2: SerialNumber: 24060853500986
[10370.386180] scsi host5: uas
[10370.386862] scsi 5:0:0:0: Direct-Access     Lexar    WorkflowCR1      0    PQ: 0 ANSI: 6
[10370.387533] sd 5:0:0:0: Attached scsi generic sg7 type 0
[10370.387544] sd 5:0:0:0: [sdg] Media removed, stopped polling
[10370.388479] sd 5:0:0:0: [sdg] Attached SCSI removable disk
[10380.541072] sd 5:0:0:0: [sdg] 500137984 512-byte logical blocks: (256 GB/238 GiB)
[10380.541589] sdg: detected capacity change from 0 to 500137984
[10380.542194]  sdg: sdg1
[10380.705865] UDF-fs: INFO Mounting volume 'A005N1RJ', timestamp 2022/06/13 19:53 (1000)
[10392.975536] usb 6-1.2: cmd cmplt err -71
[10392.983746] usb 6-1.2: cmd cmplt err -71
[10394.844272] usb 6-1.2: cmd cmplt err -71
[10423.679969] sd 5:0:0:0: [sdg] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD IN 
[10423.679983] sd 5:0:0:0: [sdg] tag#1 CDB: Read(10) 28 00 00 06 dc 00 00 01 00 00
[10423.680088] sd 5:0:0:0: [sdg] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN 
[10423.680091] sd 5:0:0:0: [sdg] tag#0 CDB: Read(10) 28 00 00 06 dd 00 00 02 00 00
[10424.863965] sd 5:0:0:0: [sdg] tag#5 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD 
[10424.863979] sd 5:0:0:0: [sdg] tag#5 CDB: Test Unit Ready 00 00 00 00 00 00
[10424.891955] scsi host5: uas_eh_device_reset_handler start
[10424.972393] usb 6-1.2: reset SuperSpeed USB device number 4 using xhci_hcd
[10424.993715] scsi host5: uas_eh_device_reset_handler success
[10428.822862] usb 6-1.2: cmd cmplt err -71
[10428.822981] usb 6-1.2: cmd cmplt err -71
[10429.011880] usb 6-1.2: cmd cmplt err -71
[10460.542349] sd 5:0:0:0: [sdg] tag#9 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD 
[10460.542362] sd 5:0:0:0: [sdg] tag#9 CDB: Test Unit Ready 00 00 00 00 00 00
[10460.542369] sd 5:0:0:0: [sdg] tag#7 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD IN 
[10460.542373] sd 5:0:0:0: [sdg] tag#7 CDB: Read(10) 28 00 00 35 28 00 00 04 00 00
[10460.542531] sd 5:0:0:0: [sdg] tag#6 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN 
[10460.542539] sd 5:0:0:0: [sdg] tag#6 CDB: Read(10) 28 00 00 35 24 00 00 04 00 00
[10460.574355] scsi host5: uas_eh_device_reset_handler start
[10460.654686] usb 6-1.2: reset SuperSpeed USB device number 4 using xhci_hcd
[10460.680083] scsi host5: uas_eh_device_reset_handler success
[10481.017104] usb 6-1.2: cmd cmplt err -71
[10481.024570] usb 6-1.2: cmd cmplt err -71
[10482.872118] usb 6-1.2: cmd cmplt err -71
[10511.740001] sd 5:0:0:0: [sdg] tag#3 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD IN 
[10511.740010] sd 5:0:0:0: [sdg] tag#3 CDB: Read(10) 28 00 01 2a 8b 00 00 02 00 00
[10511.740155] sd 5:0:0:0: [sdg] tag#2 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN 
[10511.740159] sd 5:0:0:0: [sdg] tag#2 CDB: Read(10) 28 00 01 2a 8a 00 00 01 00 00
[10512.891970] sd 5:0:0:0: [sdg] tag#0 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD 
[10512.891981] sd 5:0:0:0: [sdg] tag#0 CDB: Test Unit Ready 00 00 00 00 00 00
[10512.907987] scsi host5: uas_eh_device_reset_handler start
[10512.988385] usb 6-1.2: reset SuperSpeed USB device number 4 using xhci_hcd
[10513.009699] scsi host5: uas_eh_device_reset_handler success
[10513.365783] usb 6-1.2: cmd cmplt err -71
[10513.373067] usb 6-1.2: cmd cmplt err -71
[10515.030622] usb 6-1.2: cmd cmplt err -71
[10544.506547] sd 5:0:0:0: [sdg] tag#11 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD IN 
[10544.506560] sd 5:0:0:0: [sdg] tag#11 CDB: Read(10) 28 00 01 2e c5 00 00 04 00 00
[10544.506712] sd 5:0:0:0: [sdg] tag#10 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN 
[10544.506720] sd 5:0:0:0: [sdg] tag#10 CDB: Read(10) 28 00 01 2e c9 00 00 03 00 00
[10545.050532] sd 5:0:0:0: [sdg] tag#13 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD 
[10545.050539] sd 5:0:0:0: [sdg] tag#13 CDB: Test Unit Ready 00 00 00 00 00 00
[10545.082543] scsi host5: uas_eh_device_reset_handler start
[10545.162906] usb 6-1.2: reset SuperSpeed USB device number 4 using xhci_hcd
[10545.188093] scsi host5: uas_eh_device_reset_handler success
[10557.536970] usb 6-1.2: cmd cmplt err -71
[10557.543745] usb 6-1.2: cmd cmplt err -71
[10559.316807] usb 6-1.2: cmd cmplt err -71
[10589.560454] sd 5:0:0:0: [sdg] tag#12 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD 
[10589.560465] sd 5:0:0:0: [sdg] tag#12 CDB: Test Unit Ready 00 00 00 00 00 00
[10589.560469] sd 5:0:0:0: [sdg] tag#11 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD IN 
[10589.560472] sd 5:0:0:0: [sdg] tag#11 CDB: Read(10) 28 00 01 c7 65 00 00 04 00 00
[10589.560541] sd 5:0:0:0: [sdg] tag#10 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN 
[10589.560544] sd 5:0:0:0: [sdg] tag#10 CDB: Read(10) 28 00 01 c7 69 00 00 03 00 00
[10589.588473] scsi host5: uas_eh_device_reset_handler start
[10589.672718] usb 6-1.2: reset SuperSpeed USB device number 4 using xhci_hcd
[10589.693820] scsi host5: uas_eh_device_reset_handler success
[10590.706950] usb 6-1.2: cmd cmplt err -71
[10590.714764] usb 6-1.2: cmd cmplt err -71
[10591.731237] usb 6-1.2: cmd cmplt err -71
[10622.327035] sd 5:0:0:0: [sdg] tag#9 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD IN 
[10622.327048] sd 5:0:0:0: [sdg] tag#9 CDB: Read(10) 28 00 01 d4 34 00 00 01 00 00
[10622.327157] sd 5:0:0:0: [sdg] tag#8 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN 
[10622.327159] sd 5:0:0:0: [sdg] tag#8 CDB: Read(10) 28 00 01 d4 35 00 00 02 00 00
[10622.327289] sd 5:0:0:0: [sdg] tag#4 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD 
[10622.327293] sd 5:0:0:0: [sdg] tag#4 CDB: Test Unit Ready 00 00 00 00 00 00
[10622.342954] scsi host5: uas_eh_device_reset_handler start
[10622.427295] usb 6-1.2: reset SuperSpeed USB device number 4 using xhci_hcd
[10622.448564] scsi host5: uas_eh_device_reset_handler success
[10654.332784] usb 6-1.2: cmd cmplt err -71
[10654.339733] usb 6-1.2: cmd cmplt err -71
[10654.708276] usb 6-1.2: cmd cmplt err -71
[10661.987377] usb 6-1.2: cmd cmplt err -71

Metadata

Metadata

Assignees

No one assigned

    Labels

    No labels
    No labels

    Type

    No type

    Projects

    No projects

    Milestone

    No milestone

    Relationships

    None yet

    Development

    No branches or pull requests

    Issue actions