Async utilities for ReactPHP.
This library allows you to manage async control flow. It provides a number of combinators for Promise-based APIs. Instead of nesting or chaining promise callbacks, you can declare them as a list, which is resolved sequentially in an async manner. React/Async will not automagically change blocking code to be async. You need to have an actual event loop and non-blocking libraries interacting with that event loop for it to work. As long as you have a Promise-based API that runs in an event loop, it can be used with this library.
Table of Contents
This lightweight library consists only of a few simple functions.
All functions reside under the React\Async namespace.
The below examples refer to all functions with their fully-qualified names like this:
React\Async\await(…);As of PHP 5.6+ you can also import each required function into your code like this:
use function React\Async\await;
await(…);Alternatively, you can also use an import statement similar to this:
use React\Async;
Async\await(…);The await(PromiseInterface $promise): mixed function can be used to
block waiting for the given $promise to be fulfilled.
$result = React\Async\await($promise);This function will only return after the given $promise has settled, i.e.
either fulfilled or rejected.
While the promise is pending, this function will assume control over the event
loop. Internally, it will run() the default loop
until the promise settles and then calls stop() to terminate execution of the
loop. This means this function is more suited for short-lived promise executions
when using promise-based APIs is not feasible. For long-running applications,
using promise-based APIs by leveraging chained then() calls is usually preferable.
Once the promise is fulfilled, this function will return whatever the promise resolved to.
Once the promise is rejected, this will throw whatever the promise rejected
with. If the promise did not reject with an Exception or Throwable, then
this function will throw an UnexpectedValueException instead.
try {
$result = React\Async\await($promise);
// promise successfully fulfilled with $result
echo 'Result: ' . $result;
} catch (Throwable $e) {
// promise rejected with $e
echo 'Error: ' . $e->getMessage();
}The coroutine(callable $function, mixed ...$args): PromiseInterface<mixed> function can be used to
execute a Generator-based coroutine to "await" promises.
React\Async\coroutine(function () {
$browser = new React\Http\Browser();
try {
$response = yield $browser->get('https://example.com/');
assert($response instanceof Psr\Http\Message\ResponseInterface);
echo $response->getBody();
} catch (Exception $e) {
echo 'Error: ' . $e->getMessage() . PHP_EOL;
}
});Using Generator-based coroutines is an alternative to directly using the underlying promise APIs. For many use cases, this makes using promise-based APIs much simpler, as it resembles a synchronous code flow more closely. The above example performs the equivalent of directly using the promise APIs:
$browser = new React\Http\Browser();
$browser->get('https://example.com/')->then(function (Psr\Http\Message\ResponseInterface $response) {
echo $response->getBody();
}, function (Exception $e) {
echo 'Error: ' . $e->getMessage() . PHP_EOL;
});The yield keyword can be used to "await" a promise resolution. Internally,
it will turn the entire given $function into a Generator.
This allows the execution to be interrupted and resumed at the same place
when the promise is fulfilled. The yield statement returns whatever the
promise is fulfilled with. If the promise is rejected, it will throw an
Exception or Throwable.
The coroutine() function will always return a Proimise which will be
fulfilled with whatever your $function returns. Likewise, it will return
a promise that will be rejected if you throw an Exception or Throwable
from your $function. This allows you easily create Promise-based functions:
$promise = React\Async\coroutine(function () {
$browser = new React\Http\Browser();
$urls = [
'https://example.com/alice',
'https://example.com/bob'
];
$bytes = 0;
foreach ($urls as $url) {
$response = yield $browser->get($url);
assert($response instanceof Psr\Http\Message\ResponseInterface);
$bytes += $response->getBody()->getSize();
}
return $bytes;
});
$promise->then(function (int $bytes) {
echo 'Total size: ' . $bytes . PHP_EOL;
}, function (Exception $e) {
echo 'Error: ' . $e->getMessage() . PHP_EOL;
});The previous example uses a yield statement inside a loop to highlight how
this vastly simplifies consuming asynchronous operations. At the same time,
this naive example does not leverage concurrent execution, as it will
essentially "await" between each operation. In order to take advantage of
concurrent execution within the given $function, you can "await" multiple
promises by using a single yield together with Promise-based primitives
like this:
$promise = React\Async\coroutine(function () {
$browser = new React\Http\Browser();
$urls = [
'https://example.com/alice',
'https://example.com/bob'
];
$promises = [];
foreach ($urls as $url) {
$promises[] = $browser->get($url);
}
try {
$responses = yield React\Promise\all($promises);
} catch (Exception $e) {
foreach ($promises as $promise) {
$promise->cancel();
}
throw $e;
}
$bytes = 0;
foreach ($responses as $response) {
assert($response instanceof Psr\Http\Message\ResponseInterface);
$bytes += $response->getBody()->getSize();
}
return $bytes;
});
$promise->then(function (int $bytes) {
echo 'Total size: ' . $bytes . PHP_EOL;
}, function (Exception $e) {
echo 'Error: ' . $e->getMessage() . PHP_EOL;
});The delay(float $seconds): void function can be used to
delay program execution for duration given in $seconds.
React\Async\delay($seconds);This function will only return after the given number of $seconds have
elapsed. If there are no other events attached to this loop, it will behave
similar to PHP's sleep() function.
echo 'a';
React\Async\delay(1.0);
echo 'b';
// prints "a" at t=0.0s
// prints "b" at t=1.0sUnlike PHP's sleep() function,
this function may not necessarily halt execution of the entire process thread.
Instead, it allows the event loop to run any other events attached to the
same loop until the delay returns:
echo 'a';
Loop::addTimer(1.0, function () {
echo 'b';
});
React\Async\delay(3.0);
echo 'c';
// prints "a" at t=0.0s
// prints "b" at t=1.0s
// prints "c" at t=3.0sThis behavior is especially useful if you want to delay the program execution of a particular routine, such as when building a simple polling or retry mechanism:
try {
something();
} catch (Throwable $e) {
// in case of error, retry after a short delay
React\Async\delay(1.0);
something();
}Because this function only returns after some time has passed, it can be
considered blocking from the perspective of the calling code. While the
delay is running, this function will assume control over the event loop.
Internally, it will run() the default loop
until the delay returns and then calls stop() to terminate execution of the
loop. This means this function is more suited for short-lived promise executions
when using promise-based APIs is not feasible. For long-running applications,
using promise-based APIs by leveraging chained then() calls is usually preferable.
Internally, the $seconds argument will be used as a timer for the loop so that
it keeps running until this timer triggers. This implies that if you pass a
really small (or negative) value, it will still start a timer and will thus
trigger at the earliest possible time in the future.
The parallel(iterable<callable():PromiseInterface<mixed>> $tasks): PromiseInterface<array<mixed>> function can be used
like this:
<?php
use React\EventLoop\Loop;
use React\Promise\Promise;
React\Async\parallel([
function () {
return new Promise(function ($resolve) {
Loop::addTimer(1, function () use ($resolve) {
$resolve('Slept for a whole second');
});
});
},
function () {
return new Promise(function ($resolve) {
Loop::addTimer(1, function () use ($resolve) {
$resolve('Slept for another whole second');
});
});
},
function () {
return new Promise(function ($resolve) {
Loop::addTimer(1, function () use ($resolve) {
$resolve('Slept for yet another whole second');
});
});
},
])->then(function (array $results) {
foreach ($results as $result) {
var_dump($result);
}
}, function (Exception $e) {
echo 'Error: ' . $e->getMessage() . PHP_EOL;
});The series(iterable<callable():PromiseInterface<mixed>> $tasks): PromiseInterface<array<mixed>> function can be used
like this:
<?php
use React\EventLoop\Loop;
use React\Promise\Promise;
React\Async\series([
function () {
return new Promise(function ($resolve) {
Loop::addTimer(1, function () use ($resolve) {
$resolve('Slept for a whole second');
});
});
},
function () {
return new Promise(function ($resolve) {
Loop::addTimer(1, function () use ($resolve) {
$resolve('Slept for another whole second');
});
});
},
function () {
return new Promise(function ($resolve) {
Loop::addTimer(1, function () use ($resolve) {
$resolve('Slept for yet another whole second');
});
});
},
])->then(function (array $results) {
foreach ($results as $result) {
var_dump($result);
}
}, function (Exception $e) {
echo 'Error: ' . $e->getMessage() . PHP_EOL;
});The waterfall(iterable<callable(mixed=):PromiseInterface<mixed>> $tasks): PromiseInterface<mixed> function can be used
like this:
<?php
use React\EventLoop\Loop;
use React\Promise\Promise;
$addOne = function ($prev = 0) {
return new Promise(function ($resolve) use ($prev) {
Loop::addTimer(1, function () use ($prev, $resolve) {
$resolve($prev + 1);
});
});
};
React\Async\waterfall([
$addOne,
$addOne,
$addOne
])->then(function ($prev) {
echo "Final result is $prev\n";
}, function (Exception $e) {
echo 'Error: ' . $e->getMessage() . PHP_EOL;
});- Implement queue()
The recommended way to install this library is through Composer. New to Composer?
This project follows SemVer. This will install the latest supported version from this branch:
composer require react/async:^3.1See also the CHANGELOG for details about version upgrades.
This project aims to run on any platform and thus does not require any PHP extensions and supports running on PHP 7.1 through current PHP 8+. It's highly recommended to use the latest supported PHP version for this project.
To run the test suite, you first need to clone this repo and then install all dependencies through Composer:
composer installTo run the test suite, go to the project root and run:
vendor/bin/phpunitOn top of this, we use PHPStan on max level to ensure type safety across the project:
vendor/bin/phpstanMIT, see LICENSE file.
This project is heavily influenced by async.js.
