PCI: loongson: Fix supported link speeds for Loongson 3c19/3c29 PCIe devices proper dynamic speed negotiation. #2

AydenMeng · 2025-06-04T03:45:59Z

The "Supported Link Speeds" field reported by Loongson PCIe devices 3c19 and 3c29 is incorrect, which prevents the AMDGPU driver (and potentially others) from correctly detecting the dynamic link speed capabilities of the device. As a result, the PCIe card is incorrectly identified as a GEN1-only device, even when higher speeds are supported.

This patch manually overrides the supported_speeds field for these devices to reflect the actual supported link speeds.

Tested-by: Lain "Fearyncess" Yang [email protected]

series steppings Older steppings of the Loongson 3C6000 series incorrectly report the supported link speeds on their PCIe bridges (device IDs 3c19, 3c29) as only 2.5 GT/s, despite the upstream bus supporting speeds from 2.5 GT/s up to 16 GT/s. As a result, certain PCIe devices would be incorrectly probed as a Gen1- only, even if higher link speeds are supported, harming performance and prevents dynamic link speed functionality from being enabled in drivers such as amdgpu. Manually override the `supported_speeds` field for affected PCIe bridges with those found on the upstream bus to correctly reflect the supported link speeds. Tested-by: Lain "Fearyncess" Yang <[email protected]> Reviewed-by: Mingcong Bai <[email protected]> Signed-off-by: Ayden Meng <[email protected]>

Add a compile-time check that `*$ptr` is of the type of `$type->$($f)*`. Rename those placeholders for clarity. Given the incorrect usage: > diff --git a/rust/kernel/rbtree.rs b/rust/kernel/rbtree.rs > index 8d978c8..6a7089149878 100644 > --- a/rust/kernel/rbtree.rs > +++ b/rust/kernel/rbtree.rs > @@ -329,7 +329,7 @@ fn raw_entry(&mut self, key: &K) -> RawEntry<'_, K, V> { > while !(*child_field_of_parent).is_null() { > let curr = *child_field_of_parent; > // SAFETY: All links fields we create are in a `Node<K, V>`. > - let node = unsafe { container_of!(curr, Node<K, V>, links) }; > + let node = unsafe { container_of!(curr, Node<K, V>, key) }; > > // SAFETY: `node` is a non-null node so it is valid by the type invariants. > match key.cmp(unsafe { &(*node).key }) { this patch produces the compilation error: > error[E0308]: mismatched types > --> rust/kernel/lib.rs:220:45 > | > 220 | $crate::assert_same_type(field_ptr, (&raw const (*container_ptr).$($fields)*).cast_mut()); > | ------------------------ --------- ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ expected `*mut rb_node`, found `*mut K` > | | | > | | expected all arguments to be this `*mut bindings::rb_node` type because they need to match the type of this parameter > | arguments to this function are incorrect > | > ::: rust/kernel/rbtree.rs:270:6 > | > 270 | impl<K, V> RBTree<K, V> > | - found this type parameter > ... > 332 | let node = unsafe { container_of!(curr, Node<K, V>, key) }; > | ------------------------------------ in this macro invocation > | > = note: expected raw pointer `*mut bindings::rb_node` > found raw pointer `*mut K` > note: function defined here > --> rust/kernel/lib.rs:227:8 > | > 227 | pub fn assert_same_type<T>(_: T, _: T) {} > | ^^^^^^^^^^^^^^^^ - ---- ---- this parameter needs to match the `*mut bindings::rb_node` type of parameter #1 > | | | > | | parameter #2 needs to match the `*mut bindings::rb_node` type of this parameter > | parameter #1 and parameter #2 both reference this parameter `T` > = note: this error originates in the macro `container_of` (in Nightly builds, run with -Z macro-backtrace for more info) [ We decided to go with a variation of v1 [1] that became v4, since it seems like the obvious approach, the error messages seem good enough and the debug performance should be fine, given the kernel is always built with -O2. In the future, we may want to make the helper non-hidden, with proper documentation, for others to use. [1] https://lore.kernel.org/rust-for-linux/CANiq72kQWNfSV0KK6qs6oJt+aGdgY=hXg=wJcmK3zYcokY1LNw@mail.gmail.com/ - Miguel ] Suggested-by: Alice Ryhl <[email protected]> Link: https://lore.kernel.org/all/CAH5fLgh6gmqGBhPMi2SKn7mCmMWfOSiS0WP5wBuGPYh9ZTAiww@mail.gmail.com/ Signed-off-by: Tamir Duberstein <[email protected]> Reviewed-by: Benno Lossin <[email protected]> Link: https://lore.kernel.org/r/[email protected] [ Added intra-doc link. - Miguel ] Signed-off-by: Miguel Ojeda <[email protected]>

Batch #2 of next window Signed-off-by: Nishanth Menon <[email protected]>

Some architectures (e.g. arm64) only support memory hotplug operations on a restricted set of physical addresses. This applies even when we are faking some CXL fixed memory windows for the purposes of cxl_test. That range can be queried with mhp_get_pluggable_range(true). Use the minimum of that the top of that range and iomem_resource.end to establish the 64GiB region used by cxl_test. From thread #2 which was related to the issue in #1. [ dj: Add CONFIG_MEMORY_HOTPLUG config check, from Alison ] Link: https://lore.kernel.org/linux-cxl/[email protected]/ #2 Reported-by: Itaru Kitayama <[email protected]> Closes: pmem/ndctl#278 #1 Reviewed-by: Dan Williams <[email protected]> Tested-by: Itaru Kitayama <[email protected] <mailto:[email protected]> Tested-by: Marc Herbert <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Dave Jiang <[email protected]>

pert script tests fails with segmentation fault as below: 92: perf script tests: --- start --- test child forked, pid 103769 DB test [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.012 MB /tmp/perf-test-script.7rbftEpOzX/perf.data (9 samples) ] /usr/libexec/perf-core/tests/shell/script.sh: line 35: 103780 Segmentation fault (core dumped) perf script -i "${perfdatafile}" -s "${db_test}" --- Cleaning up --- ---- end(-1) ---- 92: perf script tests : FAILED! Backtrace pointed to : #0 0x0000000010247dd0 in maps.machine () #1 0x00000000101d178c in db_export.sample () #2 0x00000000103412c8 in python_process_event () #3 0x000000001004eb28 in process_sample_event () #4 0x000000001024fcd0 in machines.deliver_event () #5 0x000000001025005c in perf_session.deliver_event () #6 0x00000000102568b0 in __ordered_events__flush.part.0 () #7 0x0000000010251618 in perf_session.process_events () #8 0x0000000010053620 in cmd_script () #9 0x00000000100b5a28 in run_builtin () #10 0x00000000100b5f94 in handle_internal_command () #11 0x0000000010011114 in main () Further investigation reveals that this occurs in the `perf script tests`, because it uses `db_test.py` script. This script sets `perf_db_export_mode = True`. With `perf_db_export_mode` enabled, if a sample originates from a hypervisor, perf doesn't set maps for "[H]" sample in the code. Consequently, `al->maps` remains NULL when `maps__machine(al->maps)` is called from `db_export__sample`. As al->maps can be NULL in case of Hypervisor samples , use thread->maps because even for Hypervisor sample, machine should exist. If we don't have machine for some reason, return -1 to avoid segmentation fault. Reported-by: Disha Goel <[email protected]> Signed-off-by: Aditya Bodkhe <[email protected]> Reviewed-by: Adrian Hunter <[email protected]> Tested-by: Disha Goel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Suggested-by: Adrian Hunter <[email protected]> Signed-off-by: Namhyung Kim <[email protected]>

Some architectures (e.g. arm64) only support memory hotplug operations on a restricted set of physical addresses. This applies even when we are faking some CXL fixed memory windows for the purposes of cxl_test. That range can be queried with mhp_get_pluggable_range(true). Use the minimum of that the top of that range and iomem_resource.end to establish the 64GiB region used by cxl_test. From thread #2 which was related to the issue in #1. [ dj: Add CONFIG_MEMORY_HOTPLUG config check, from Alison ] Link: https://lore.kernel.org/linux-cxl/[email protected]/ #2 Reported-by: Itaru Kitayama <[email protected]> Closes: pmem/ndctl#278 #1 Reviewed-by: Dan Williams <[email protected]> Tested-by: Itaru Kitayama <[email protected] <mailto:[email protected]> Tested-by: Marc Herbert <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Dave Jiang <[email protected]>

[ Upstream commit ee684de ] As shown in [1], it is possible to corrupt a BPF ELF file such that arbitrary BPF instructions are loaded by libbpf. This can be done by setting a symbol (BPF program) section offset to a large (unsigned) number such that <section start + symbol offset> overflows and points before the section data in the memory. Consider the situation below where: - prog_start = sec_start + symbol_offset <-- size_t overflow here - prog_end = prog_start + prog_size prog_start sec_start prog_end sec_end | | | | v v v v .....................|################################|............ The report in [1] also provides a corrupted BPF ELF which can be used as a reproducer: $ readelf -S crash Section Headers: [Nr] Name Type Address Offset Size EntSize Flags Link Info Align ... [ 2] uretprobe.mu[...] PROGBITS 0000000000000000 00000040 0000000000000068 0000000000000000 AX 0 0 8 $ readelf -s crash Symbol table '.symtab' contains 8 entries: Num: Value Size Type Bind Vis Ndx Name ... 6: ffffffffffffffb8 104 FUNC GLOBAL DEFAULT 2 handle_tp Here, the handle_tp prog has section offset ffffffffffffffb8, i.e. will point before the actual memory where section 2 is allocated. This is also reported by AddressSanitizer: ================================================================= ==1232==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7c7302fe0000 at pc 0x7fc3046e4b77 bp 0x7ffe64677cd0 sp 0x7ffe64677490 READ of size 104 at 0x7c7302fe0000 thread T0 #0 0x7fc3046e4b76 in memcpy (/lib64/libasan.so.8+0xe4b76) #1 0x00000040df3e in bpf_object__init_prog /src/libbpf/src/libbpf.c:856 #2 0x00000040df3e in bpf_object__add_programs /src/libbpf/src/libbpf.c:928 #3 0x00000040df3e in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3930 #4 0x00000040df3e in bpf_object_open /src/libbpf/src/libbpf.c:8067 #5 0x00000040f176 in bpf_object__open_file /src/libbpf/src/libbpf.c:8090 #6 0x000000400c16 in main /poc/poc.c:8 #7 0x7fc3043d25b4 in __libc_start_call_main (/lib64/libc.so.6+0x35b4) #8 0x7fc3043d2667 in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x3667) #9 0x000000400b34 in _start (/poc/poc+0x400b34) 0x7c7302fe0000 is located 64 bytes before 104-byte region [0x7c7302fe0040,0x7c7302fe00a8) allocated by thread T0 here: #0 0x7fc3046e716b in malloc (/lib64/libasan.so.8+0xe716b) #1 0x7fc3045ee600 in __libelf_set_rawdata_wrlock (/lib64/libelf.so.1+0xb600) #2 0x7fc3045ef018 in __elf_getdata_rdlock (/lib64/libelf.so.1+0xc018) #3 0x00000040642f in elf_sec_data /src/libbpf/src/libbpf.c:3740 The problem here is that currently, libbpf only checks that the program end is within the section bounds. There used to be a check `while (sec_off < sec_sz)` in bpf_object__add_programs, however, it was removed by commit 6245947 ("libbpf: Allow gaps in BPF program sections to support overriden weak functions"). Add a check for detecting the overflow of `sec_off + prog_sz` to bpf_object__init_prog to fix this issue. [1] https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md Fixes: 6245947 ("libbpf: Allow gaps in BPF program sections to support overriden weak functions") Reported-by: lmarch2 <[email protected]> Signed-off-by: Viktor Malik <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Reviewed-by: Shung-Hsi Yu <[email protected]> Link: https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>

commit c98cc97 upstream. Running a modified trace-cmd record --nosplice where it does a mmap of the ring buffer when '--nosplice' is set, caused the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 6.15.0-rc7-test-00002-gfb7d03d8a82f torvalds#551 Not tainted ------------------------------------------------------ trace-cmd/1113 is trying to acquire lock: ffff888100062888 (&buffer->mutex){+.+.}-{4:4}, at: ring_buffer_map+0x11c/0xe70 but task is already holding lock: ffff888100a5f9f8 (&cpu_buffer->mapping_lock){+.+.}-{4:4}, at: ring_buffer_map+0xcf/0xe70 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #5 (&cpu_buffer->mapping_lock){+.+.}-{4:4}: __mutex_lock+0x192/0x18c0 ring_buffer_map+0xcf/0xe70 tracing_buffers_mmap+0x1c4/0x3b0 __mmap_region+0xd8d/0x1f70 do_mmap+0x9d7/0x1010 vm_mmap_pgoff+0x20b/0x390 ksys_mmap_pgoff+0x2e9/0x440 do_syscall_64+0x79/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #4 (&mm->mmap_lock){++++}-{4:4}: __might_fault+0xa5/0x110 _copy_to_user+0x22/0x80 _perf_ioctl+0x61b/0x1b70 perf_ioctl+0x62/0x90 __x64_sys_ioctl+0x134/0x190 do_syscall_64+0x79/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #3 (&cpuctx_mutex){+.+.}-{4:4}: __mutex_lock+0x192/0x18c0 perf_event_init_cpu+0x325/0x7c0 perf_event_init+0x52a/0x5b0 start_kernel+0x263/0x3e0 x86_64_start_reservations+0x24/0x30 x86_64_start_kernel+0x95/0xa0 common_startup_64+0x13e/0x141 -> #2 (pmus_lock){+.+.}-{4:4}: __mutex_lock+0x192/0x18c0 perf_event_init_cpu+0xb7/0x7c0 cpuhp_invoke_callback+0x2c0/0x1030 __cpuhp_invoke_callback_range+0xbf/0x1f0 _cpu_up+0x2e7/0x690 cpu_up+0x117/0x170 cpuhp_bringup_mask+0xd5/0x120 bringup_nonboot_cpus+0x13d/0x170 smp_init+0x2b/0xf0 kernel_init_freeable+0x441/0x6d0 kernel_init+0x1e/0x160 ret_from_fork+0x34/0x70 ret_from_fork_asm+0x1a/0x30 -> #1 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x2a/0xd0 ring_buffer_resize+0x610/0x14e0 __tracing_resize_ring_buffer.part.0+0x42/0x120 tracing_set_tracer+0x7bd/0xa80 tracing_set_trace_write+0x132/0x1e0 vfs_write+0x21c/0xe80 ksys_write+0xf9/0x1c0 do_syscall_64+0x79/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&buffer->mutex){+.+.}-{4:4}: __lock_acquire+0x1405/0x2210 lock_acquire+0x174/0x310 __mutex_lock+0x192/0x18c0 ring_buffer_map+0x11c/0xe70 tracing_buffers_mmap+0x1c4/0x3b0 __mmap_region+0xd8d/0x1f70 do_mmap+0x9d7/0x1010 vm_mmap_pgoff+0x20b/0x390 ksys_mmap_pgoff+0x2e9/0x440 do_syscall_64+0x79/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e other info that might help us debug this: Chain exists of: &buffer->mutex --> &mm->mmap_lock --> &cpu_buffer->mapping_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&cpu_buffer->mapping_lock); lock(&mm->mmap_lock); lock(&cpu_buffer->mapping_lock); lock(&buffer->mutex); *** DEADLOCK *** 2 locks held by trace-cmd/1113: #0: ffff888106b847e0 (&mm->mmap_lock){++++}-{4:4}, at: vm_mmap_pgoff+0x192/0x390 #1: ffff888100a5f9f8 (&cpu_buffer->mapping_lock){+.+.}-{4:4}, at: ring_buffer_map+0xcf/0xe70 stack backtrace: CPU: 5 UID: 0 PID: 1113 Comm: trace-cmd Not tainted 6.15.0-rc7-test-00002-gfb7d03d8a82f torvalds#551 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6e/0xa0 print_circular_bug.cold+0x178/0x1be check_noncircular+0x146/0x160 __lock_acquire+0x1405/0x2210 lock_acquire+0x174/0x310 ? ring_buffer_map+0x11c/0xe70 ? ring_buffer_map+0x11c/0xe70 ? __mutex_lock+0x169/0x18c0 __mutex_lock+0x192/0x18c0 ? ring_buffer_map+0x11c/0xe70 ? ring_buffer_map+0x11c/0xe70 ? function_trace_call+0x296/0x370 ? __pfx___mutex_lock+0x10/0x10 ? __pfx_function_trace_call+0x10/0x10 ? __pfx___mutex_lock+0x10/0x10 ? _raw_spin_unlock+0x2d/0x50 ? ring_buffer_map+0x11c/0xe70 ? ring_buffer_map+0x11c/0xe70 ? __mutex_lock+0x5/0x18c0 ring_buffer_map+0x11c/0xe70 ? do_raw_spin_lock+0x12d/0x270 ? find_held_lock+0x2b/0x80 ? _raw_spin_unlock+0x2d/0x50 ? rcu_is_watching+0x15/0xb0 ? _raw_spin_unlock+0x2d/0x50 ? trace_preempt_on+0xd0/0x110 tracing_buffers_mmap+0x1c4/0x3b0 __mmap_region+0xd8d/0x1f70 ? ring_buffer_lock_reserve+0x99/0xff0 ? __pfx___mmap_region+0x10/0x10 ? ring_buffer_lock_reserve+0x99/0xff0 ? __pfx_ring_buffer_lock_reserve+0x10/0x10 ? __pfx_ring_buffer_lock_reserve+0x10/0x10 ? bpf_lsm_mmap_addr+0x4/0x10 ? security_mmap_addr+0x46/0xd0 ? lock_is_held_type+0xd9/0x130 do_mmap+0x9d7/0x1010 ? 0xffffffffc0370095 ? __pfx_do_mmap+0x10/0x10 vm_mmap_pgoff+0x20b/0x390 ? __pfx_vm_mmap_pgoff+0x10/0x10 ? 0xffffffffc0370095 ksys_mmap_pgoff+0x2e9/0x440 do_syscall_64+0x79/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fb0963a7de2 Code: 00 00 00 0f 1f 44 00 00 41 f7 c1 ff 0f 00 00 75 27 55 89 cd 53 48 89 fb 48 85 ff 74 3b 41 89 ea 48 89 df b8 09 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 76 5b 5d c3 0f 1f 00 48 8b 05 e1 9f 0d 00 64 RSP: 002b:00007ffdcc8fb878 EFLAGS: 00000246 ORIG_RAX: 0000000000000009 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fb0963a7de2 RDX: 0000000000000001 RSI: 0000000000001000 RDI: 0000000000000000 RBP: 0000000000000001 R08: 0000000000000006 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffdcc8fbe68 R14: 00007fb096628000 R15: 00005633e01a5c90 </TASK> The issue is that cpus_read_lock() is taken within buffer->mutex. The memory mapped pages are taken with the mmap_lock held. The buffer->mutex is taken within the cpu_buffer->mapping_lock. There's quite a chain with all these locks, where the deadlock can be fixed by moving the cpus_read_lock() outside the taking of the buffer->mutex. Cc: [email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Mathieu Desnoyers <[email protected]> Cc: Vincent Donnefort <[email protected]> Link: https://lore.kernel.org/[email protected] Fixes: 117c392 ("ring-buffer: Introducing ring-buffer mapping functions") Signed-off-by: Steven Rostedt (Google) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.16, take #2 - Rework of system register accessors for system registers that are directly writen to memory, so that sanitisation of the in-memory value happens at the correct time (after the read, or before the write). For convenience, RMW-style accessors are also provided. - Multiple fixes for the so-called "arch-timer-edge-cases' selftest, which was always broken.

As-per the SBI specification, an SBI remote fence operation applies to the entire address space if either: 1) start_addr and size are both 0 2) size is equal to 2^XLEN-1 >From the above, only #1 is checked by SBI SFENCE calls so fix the size parameter check in SBI SFENCE calls to cover #2 as well. Fixes: 13acfec ("RISC-V: KVM: Add remote HFENCE functions based on VCPU requests") Reviewed-by: Atish Patra <[email protected]> Signed-off-by: Anup Patel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Anup Patel <[email protected]>

This patch fixes an issue seen in a large-scale deployment under heavy incoming pkts where the aRFS flow wrongly matches a flow and reprograms the NIC with wrong settings. That mis-steering causes RX-path latency spikes and noisy neighbor effects when many connections collide on the same hash (some of our production servers have 20-30K connections). set_rps_cpu() calls ndo_rx_flow_steer() with flow_id that is calculated by hashing the skb sized by the per rx-queue table size. This results in multiple connections (even across different rx-queues) getting the same hash value. The driver steer function modifies the wrong flow to use this rx-queue, e.g.: Flow#1 is first added: Flow#1: <ip1, port1, ip2, port2>, Hash 'h', q#10 Later when a new flow needs to be added: Flow#2: <ip3, port3, ip4, port4>, Hash 'h', q#20 The driver finds the hash 'h' from Flow#1 and updates it to use q#20. This results in both flows getting un-optimized - packets for Flow#1 goes to q#20, and then reprogrammed back to q#10 later and so on; and Flow #2 programming is never done as Flow#1 is matched first for all misses. Many flows may wrongly share the same hash and reprogram rules of the original flow each with their own q#. Tested on two 144-core servers with 16K netperf sessions for 180s. Netperf clients are pinned to cores 0-71 sequentially (so that wrong packets on q#s 72-143 can be measured). IRQs are set 1:1 for queues -> CPUs, enable XPS, enable aRFS (global value is 144 * rps_flow_cnt). Test notes about results from ice_rx_flow_steer(): --------------------------------------------------- 1. "Skip:" counter increments here: if (fltr_info->q_index == rxq_idx || arfs_entry->fltr_state != ICE_ARFS_ACTIVE) goto out; 2. "Add:" counter increments here: ret = arfs_entry->fltr_info.fltr_id; INIT_HLIST_NODE(&arfs_entry->list_entry); 3. "Update:" counter increments here: /* update the queue to forward to on an already existing flow */ Runtime comparison: original code vs with the patch for different rps_flow_cnt values. +-------------------------------+--------------+--------------+ | rps_flow_cnt | 512 | 2048 | +-------------------------------+--------------+--------------+ | Ratio of Pkts on Good:Bad q's | 214 vs 822K | 1.1M vs 980K | | Avoid wrong aRFS programming | 0 vs 310K | 0 vs 30K | | CPU User | 216 vs 183 | 216 vs 206 | | CPU System | 1441 vs 1171 | 1447 vs 1320 | | CPU Softirq | 1245 vs 920 | 1238 vs 961 | | CPU Total | 29 vs 22.7 | 29 vs 24.9 | | aRFS Update | 533K vs 59 | 521K vs 32 | | aRFS Skip | 82M vs 77M | 7.2M vs 4.5M | +-------------------------------+--------------+--------------+ A separate TCP_STREAM and TCP_RR with 1,4,8,16,64,128,256,512 connections showed no performance degradation. Some points on the patch/aRFS behavior: 1. Enabling full tuple matching ensures flows are always correctly matched, even with smaller hash sizes. 2. 5-6% drop in CPU utilization as the packets arrive at the correct CPUs and fewer calls to driver for programming on misses. 3. Larger hash tables reduces mis-steering due to more unique flow hashes, but still has clashes. However, with larger per-device rps_flow_cnt, old flows take more time to expire and new aRFS flows cannot be added if h/w limits are reached (rps_may_expire_flow() succeeds when 10*rps_flow_cnt pkts have been processed by this cpu that are not part of the flow). Fixes: 28bf267 ("ice: Implement aRFS") Signed-off-by: Krishna Kumar <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Rinitha S <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>

syzkaller reported a null-ptr-deref in sock_omalloc() while allocating a CALIPSO option. [0] The NULL is of struct sock, which was fetched by sk_to_full_sk() in calipso_req_setattr(). Since commit a1a5344 ("tcp: avoid two atomic ops for syncookies"), reqsk->rsk_listener could be NULL when SYN Cookie is returned to its client, as hinted by the leading SYN Cookie log. Here are 3 options to fix the bug: 1) Return 0 in calipso_req_setattr() 2) Return an error in calipso_req_setattr() 3) Alaways set rsk_listener 1) is no go as it bypasses LSM, but 2) effectively disables SYN Cookie for CALIPSO. 3) is also no go as there have been many efforts to reduce atomic ops and make TCP robust against DDoS. See also commit 3b24d85 ("tcp/dccp: do not touch listener sk_refcnt under synflood"). As of the blamed commit, SYN Cookie already did not need refcounting, and no one has stumbled on the bug for 9 years, so no CALIPSO user will care about SYN Cookie. Let's return an error in calipso_req_setattr() and calipso_req_delattr() in the SYN Cookie case. This can be reproduced by [1] on Fedora and now connect() of nc times out. [0]: TCP: request_sock_TCPv6: Possible SYN flooding on port [::]:20002. Sending cookies. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 3 UID: 0 PID: 12262 Comm: syz.1.2611 Not tainted 6.14.0 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_pnet include/net/net_namespace.h:406 [inline] RIP: 0010:sock_net include/net/sock.h:655 [inline] RIP: 0010:sock_kmalloc+0x35/0x170 net/core/sock.c:2806 Code: 89 d5 41 54 55 89 f5 53 48 89 fb e8 25 e3 c6 fd e8 f0 91 e3 00 48 8d 7b 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 26 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b RSP: 0018:ffff88811af89038 EFLAGS: 00010216 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffff888105266400 RDX: 0000000000000006 RSI: ffff88800c890000 RDI: 0000000000000030 RBP: 0000000000000050 R08: 0000000000000000 R09: ffff88810526640e R10: ffffed1020a4cc81 R11: ffff88810526640f R12: 0000000000000000 R13: 0000000000000820 R14: ffff888105266400 R15: 0000000000000050 FS: 00007f0653a07640(0000) GS:ffff88811af80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f863ba096f4 CR3: 00000000163c0005 CR4: 0000000000770ef0 PKRU: 80000000 Call Trace: <IRQ> ipv6_renew_options+0x279/0x950 net/ipv6/exthdrs.c:1288 calipso_req_setattr+0x181/0x340 net/ipv6/calipso.c:1204 calipso_req_setattr+0x56/0x80 net/netlabel/netlabel_calipso.c:597 netlbl_req_setattr+0x18a/0x440 net/netlabel/netlabel_kapi.c:1249 selinux_netlbl_inet_conn_request+0x1fb/0x320 security/selinux/netlabel.c:342 selinux_inet_conn_request+0x1eb/0x2c0 security/selinux/hooks.c:5551 security_inet_conn_request+0x50/0xa0 security/security.c:4945 tcp_v6_route_req+0x22c/0x550 net/ipv6/tcp_ipv6.c:825 tcp_conn_request+0xec8/0x2b70 net/ipv4/tcp_input.c:7275 tcp_v6_conn_request+0x1e3/0x440 net/ipv6/tcp_ipv6.c:1328 tcp_rcv_state_process+0xafa/0x52b0 net/ipv4/tcp_input.c:6781 tcp_v6_do_rcv+0x8a6/0x1a40 net/ipv6/tcp_ipv6.c:1667 tcp_v6_rcv+0x505e/0x5b50 net/ipv6/tcp_ipv6.c:1904 ip6_protocol_deliver_rcu+0x17c/0x1da0 net/ipv6/ip6_input.c:436 ip6_input_finish+0x103/0x180 net/ipv6/ip6_input.c:480 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ip6_input+0x13c/0x6b0 net/ipv6/ip6_input.c:491 dst_input include/net/dst.h:469 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] ip6_rcv_finish+0xb6/0x490 net/ipv6/ip6_input.c:69 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ipv6_rcv+0xf9/0x490 net/ipv6/ip6_input.c:309 __netif_receive_skb_one_core+0x12e/0x1f0 net/core/dev.c:5896 __netif_receive_skb+0x1d/0x170 net/core/dev.c:6009 process_backlog+0x41e/0x13b0 net/core/dev.c:6357 __napi_poll+0xbd/0x710 net/core/dev.c:7191 napi_poll net/core/dev.c:7260 [inline] net_rx_action+0x9de/0xde0 net/core/dev.c:7382 handle_softirqs+0x19a/0x770 kernel/softirq.c:561 do_softirq.part.0+0x36/0x70 kernel/softirq.c:462 </IRQ> <TASK> do_softirq arch/x86/include/asm/preempt.h:26 [inline] __local_bh_enable_ip+0xf1/0x110 kernel/softirq.c:389 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline] __dev_queue_xmit+0xc2a/0x3c40 net/core/dev.c:4679 dev_queue_xmit include/linux/netdevice.h:3313 [inline] neigh_hh_output include/net/neighbour.h:523 [inline] neigh_output include/net/neighbour.h:537 [inline] ip6_finish_output2+0xd69/0x1f80 net/ipv6/ip6_output.c:141 __ip6_finish_output net/ipv6/ip6_output.c:215 [inline] ip6_finish_output+0x5dc/0xd60 net/ipv6/ip6_output.c:226 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x24b/0x8d0 net/ipv6/ip6_output.c:247 dst_output include/net/dst.h:459 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ip6_xmit+0xbbc/0x20d0 net/ipv6/ip6_output.c:366 inet6_csk_xmit+0x39a/0x720 net/ipv6/inet6_connection_sock.c:135 __tcp_transmit_skb+0x1a7b/0x3b40 net/ipv4/tcp_output.c:1471 tcp_transmit_skb net/ipv4/tcp_output.c:1489 [inline] tcp_send_syn_data net/ipv4/tcp_output.c:4059 [inline] tcp_connect+0x1c0c/0x4510 net/ipv4/tcp_output.c:4148 tcp_v6_connect+0x156c/0x2080 net/ipv6/tcp_ipv6.c:333 __inet_stream_connect+0x3a7/0xed0 net/ipv4/af_inet.c:677 tcp_sendmsg_fastopen+0x3e2/0x710 net/ipv4/tcp.c:1039 tcp_sendmsg_locked+0x1e82/0x3570 net/ipv4/tcp.c:1091 tcp_sendmsg+0x2f/0x50 net/ipv4/tcp.c:1358 inet6_sendmsg+0xb9/0x150 net/ipv6/af_inet6.c:659 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0xf4/0x2a0 net/socket.c:733 __sys_sendto+0x29a/0x390 net/socket.c:2187 __do_sys_sendto net/socket.c:2194 [inline] __se_sys_sendto net/socket.c:2190 [inline] __x64_sys_sendto+0xe1/0x1c0 net/socket.c:2190 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xc3/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f06553c47ed Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f0653a06fc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f0655605fa0 RCX: 00007f06553c47ed RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000000000b RBP: 00007f065545db38 R08: 0000200000000140 R09: 000000000000001c R10: f7384d4ea84b01bd R11: 0000000000000246 R12: 0000000000000000 R13: 00007f0655605fac R14: 00007f0655606038 R15: 00007f06539e7000 </TASK> Modules linked in: [1]: dnf install -y selinux-policy-targeted policycoreutils netlabel_tools procps-ng nmap-ncat mount -t selinuxfs none /sys/fs/selinux load_policy netlabelctl calipso add pass doi:1 netlabelctl map del default netlabelctl map add default address:::1 protocol:calipso,1 sysctl net.ipv4.tcp_syncookies=2 nc -l ::1 80 & nc ::1 80 Fixes: e1adea9 ("calipso: Allow request sockets to be relabelled by the lsm.") Reported-by: syzkaller <[email protected]> Reported-by: John Cheung <[email protected]> Closes: https://lore.kernel.org/netdev/CAP=Rh=MvfhrGADy+-WJiftV2_WzMH4VEhEFmeT28qY+4yxNu4w@mail.gmail.com/ Signed-off-by: Kuniyuki Iwashima <[email protected]> Acked-by: Paul Moore <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

…mage commit 42cb74a upstream. WARNING: CPU: 1 PID: 9426 at fs/inode.c:417 drop_nlink+0xac/0xd0 home/cc/linux/fs/inode.c:417 Modules linked in: CPU: 1 UID: 0 PID: 9426 Comm: syz-executor568 Not tainted 6.14.0-12627-g94d471a4f428 #2 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:drop_nlink+0xac/0xd0 home/cc/linux/fs/inode.c:417 Code: 48 8b 5d 28 be 08 00 00 00 48 8d bb 70 07 00 00 e8 f9 67 e6 ff f0 48 ff 83 70 07 00 00 5b 5d e9 9a 12 82 ff e8 95 12 82 ff 90 <0f> 0b 90 c7 45 48 ff ff ff ff 5b 5d e9 83 12 82 ff e8 fe 5f e6 ff RSP: 0018:ffffc900026b7c28 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff8239710f RDX: ffff888041345a00 RSI: ffffffff8239717b RDI: 0000000000000005 RBP: ffff888054509ad0 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: ffffffff9ab36f08 R12: ffff88804bb40000 R13: ffff8880545091e0 R14: 0000000000008000 R15: ffff8880545091e0 FS: 000055555d0c5880(0000) GS:ffff8880eb3e3000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f915c55b178 CR3: 0000000050d20000 CR4: 0000000000352ef0 Call Trace: <task> f2fs_i_links_write home/cc/linux/fs/f2fs/f2fs.h:3194 [inline] f2fs_drop_nlink+0xd1/0x3c0 home/cc/linux/fs/f2fs/dir.c:845 f2fs_delete_entry+0x542/0x1450 home/cc/linux/fs/f2fs/dir.c:909 f2fs_unlink+0x45c/0x890 home/cc/linux/fs/f2fs/namei.c:581 vfs_unlink+0x2fb/0x9b0 home/cc/linux/fs/namei.c:4544 do_unlinkat+0x4c5/0x6a0 home/cc/linux/fs/namei.c:4608 __do_sys_unlink home/cc/linux/fs/namei.c:4654 [inline] __se_sys_unlink home/cc/linux/fs/namei.c:4652 [inline] __x64_sys_unlink+0xc5/0x110 home/cc/linux/fs/namei.c:4652 do_syscall_x64 home/cc/linux/arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xc7/0x250 home/cc/linux/arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fb3d092324b Code: 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 57 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffdc232d938 EFLAGS: 00000206 ORIG_RAX: 0000000000000057 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fb3d092324b RDX: 00007ffdc232d960 RSI: 00007ffdc232d960 RDI: 00007ffdc232d9f0 RBP: 00007ffdc232d9f0 R08: 0000000000000001 R09: 00007ffdc232d7c0 R10: 00000000fffffffd R11: 0000000000000206 R12: 00007ffdc232eaf0 R13: 000055555d0cebb0 R14: 00007ffdc232d958 R15: 0000000000000001 </task> Cc: [email protected] Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit eedf3e3 ] ACPICA commit 1c28da2242783579d59767617121035dafba18c3 This was originally done in NetBSD: NetBSD/src@b69d1ac and is the correct alternative to the smattering of `memcpy`s I previously contributed to this repository. This also sidesteps the newly strict checks added in UBSAN: llvm/llvm-project@7926744 Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021afcfdeca5e in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:329 <platform-bus-x86.so>+0x6aca5e #1.2 0x000021982bc4af3c in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x41f3c #1.1 0x000021982bc4af3c in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x41f3c #1 0x000021982bc4af3c in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:395 <libclang_rt.asan.so>+0x41f3c #2 0x000021982bc4bb6f in handletype_mismatch_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:137 <libclang_rt.asan.so>+0x42b6f #3 0x000021982bc4b723 in __ubsan_handle_type_mismatch_v1 compiler-rt/lib/ubsan/ubsan_handlers.cpp:142 <libclang_rt.asan.so>+0x42723 #4 0x000021afcfdeca5e in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:329 <platform-bus-x86.so>+0x6aca5e #5 0x000021afcfdf2089 in acpi_rs_convert_aml_to_resource(struct acpi_resource*, union aml_resource*, struct acpi_rsconvert_info*) ../../third_party/acpica/source/components/resources/rsmisc.c:355 <platform-bus-x86.so>+0x6b2089 #6 0x000021afcfded169 in acpi_rs_convert_aml_to_resources(u8*, u32, u32, u8, void**) ../../third_party/acpica/source/components/resources/rslist.c:137 <platform-bus-x86.so>+0x6ad169 #7 0x000021afcfe2d24a in acpi_ut_walk_aml_resources(struct acpi_walk_state*, u8*, acpi_size, acpi_walk_aml_callback, void**) ../../third_party/acpica/source/components/utilities/utresrc.c:237 <platform-bus-x86.so>+0x6ed24a #8 0x000021afcfde66b7 in acpi_rs_create_resource_list(union acpi_operand_object*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rscreate.c:199 <platform-bus-x86.so>+0x6a66b7 #9 0x000021afcfdf6979 in acpi_rs_get_method_data(acpi_handle, const char*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rsutils.c:770 <platform-bus-x86.so>+0x6b6979 #10 0x000021afcfdf708f in acpi_walk_resources(acpi_handle, char*, acpi_walk_resource_callback, void*) ../../third_party/acpica/source/components/resources/rsxface.c:731 <platform-bus-x86.so>+0x6b708f #11 0x000021afcfa95dcf in acpi::acpi_impl::walk_resources(acpi::acpi_impl*, acpi_handle, const char*, acpi::Acpi::resources_callable) ../../src/devices/board/lib/acpi/acpi-impl.cc:41 <platform-bus-x86.so>+0x355dcf #12 0x000021afcfaa8278 in acpi::device_builder::gather_resources(acpi::device_builder*, acpi::Acpi*, fidl::any_arena&, acpi::Manager*, acpi::device_builder::gather_resources_callback) ../../src/devices/board/lib/acpi/device-builder.cc:84 <platform-bus-x86.so>+0x368278 torvalds#13 0x000021afcfbddb87 in acpi::Manager::configure_discovered_devices(acpi::Manager*) ../../src/devices/board/lib/acpi/manager.cc:75 <platform-bus-x86.so>+0x49db87 torvalds#14 0x000021afcf99091d in publish_acpi_devices(acpi::Manager*, zx_device_t*, zx_device_t*) ../../src/devices/board/drivers/x86/acpi-nswalk.cc:95 <platform-bus-x86.so>+0x25091d torvalds#15 0x000021afcf9c1d4e in x86::X86::do_init(x86::X86*) ../../src/devices/board/drivers/x86/x86.cc:60 <platform-bus-x86.so>+0x281d4e torvalds#16 0x000021afcf9e33ad in λ(x86::X86::ddk_init::(anon class)*) ../../src/devices/board/drivers/x86/x86.cc:77 <platform-bus-x86.so>+0x2a33ad torvalds#17 0x000021afcf9e313e in fit::internal::target<(lambda at../../src/devices/board/drivers/x86/x86.cc:76:19), false, false, std::__2::allocator<std::byte>, void>::invoke(void*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:183 <platform-bus-x86.so>+0x2a313e torvalds#18 0x000021afcfbab4c7 in fit::internal::function_base<16UL, false, void(), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<16UL, false, void (), std::__2::allocator<std::byte> >*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <platform-bus-x86.so>+0x46b4c7 torvalds#19 0x000021afcfbab342 in fit::function_impl<16UL, false, void(), std::__2::allocator<std::byte>>::operator()(const fit::function_impl<16UL, false, void (), std::__2::allocator<std::byte> >*) ../../sdk/lib/fit/include/lib/fit/function.h:315 <platform-bus-x86.so>+0x46b342 torvalds#20 0x000021afcfcd98c3 in async::internal::retained_task::Handler(async_dispatcher_t*, async_task_t*, zx_status_t) ../../sdk/lib/async/task.cc:24 <platform-bus-x86.so>+0x5998c3 torvalds#21 0x00002290f9924616 in λ(const driver_runtime::Dispatcher::post_task::(anon class)*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/dispatcher.cc:789 <libdriver_runtime.so>+0x10a616 torvalds#22 0x00002290f9924323 in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:788:7), true, false, std::__2::allocator<std::byte>, void, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int>::invoke(void*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0x10a323 torvalds#23 0x00002290f9904b76 in fit::internal::function_base<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <libdriver_runtime.so>+0xeab76 torvalds#24 0x00002290f9904831 in fit::callback_impl<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int), std::__2::allocator<std::byte>>::operator()(fit::callback_impl<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/function.h:471 <libdriver_runtime.so>+0xea831 torvalds#25 0x00002290f98d5adc in driver_runtime::callback_request::Call(driver_runtime::callback_request*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/callback_request.h:74 <libdriver_runtime.so>+0xbbadc torvalds#26 0x00002290f98e1e58 in driver_runtime::Dispatcher::dispatch_callback(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >) ../../src/devices/bin/driver_runtime/dispatcher.cc:1248 <libdriver_runtime.so>+0xc7e58 torvalds#27 0x00002290f98e4159 in driver_runtime::Dispatcher::dispatch_callbacks(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:1308 <libdriver_runtime.so>+0xca159 torvalds#28 0x00002290f9918414 in λ(const driver_runtime::Dispatcher::create_with_adder::(anon class)*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:353 <libdriver_runtime.so>+0xfe414 torvalds#29 0x00002290f991812d in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:351:7), true, false, std::__2::allocator<std::byte>, void, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>>::invoke(void*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0xfe12d torvalds#30 0x00002290f9906fc7 in fit::internal::function_base<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <libdriver_runtime.so>+0xecfc7 torvalds#31 0x00002290f9906c66 in fit::function_impl<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte>>::operator()(const fit::function_impl<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/function.h:315 <libdriver_runtime.so>+0xecc66 torvalds#32 0x00002290f98e73d9 in driver_runtime::Dispatcher::event_waiter::invoke_callback(driver_runtime::Dispatcher::event_waiter*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.h:543 <libdriver_runtime.so>+0xcd3d9 torvalds#33 0x00002290f98e700d in driver_runtime::Dispatcher::event_waiter::handle_event(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/dispatcher.cc:1442 <libdriver_runtime.so>+0xcd00d torvalds#34 0x00002290f9918983 in async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event(async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>*, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/async_loop_owned_event_handler.h:59 <libdriver_runtime.so>+0xfe983 torvalds#35 0x00002290f9918b9e in async::wait_method<async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>, &async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event>::call_handler(async_dispatcher_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../sdk/lib/async/include/lib/async/cpp/wait.h:201 <libdriver_runtime.so>+0xfeb9e torvalds#36 0x00002290f99bf509 in async_loop_dispatch_wait(async_loop_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../sdk/lib/async-loop/loop.c:394 <libdriver_runtime.so>+0x1a5509 torvalds#37 0x00002290f99b9958 in async_loop_run_once(async_loop_t*, zx_time_t) ../../sdk/lib/async-loop/loop.c:343 <libdriver_runtime.so>+0x19f958 torvalds#38 0x00002290f99b9247 in async_loop_run(async_loop_t*, zx_time_t, _Bool) ../../sdk/lib/async-loop/loop.c:301 <libdriver_runtime.so>+0x19f247 torvalds#39 0x00002290f99ba962 in async_loop_run_thread(void*) ../../sdk/lib/async-loop/loop.c:860 <libdriver_runtime.so>+0x1a0962 torvalds#40 0x000041afd176ef30 in start_c11(void*) ../../zircon/third_party/ulib/musl/pthread/pthread_create.c:63 <libc.so>+0x84f30 torvalds#41 0x000041afd18a448d in thread_trampoline(uintptr_t, uintptr_t) ../../zircon/system/ulib/runtime/thread.cc:100 <libc.so>+0x1ba48d Link: acpica/acpica@1c28da22 Signed-off-by: Rafael J. Wysocki <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Tamir Duberstein <[email protected]> [ rjw: Pick up the tag from Tamir ] Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 5d3bc9e ] This patch fixes an issue seen in a large-scale deployment under heavy incoming pkts where the aRFS flow wrongly matches a flow and reprograms the NIC with wrong settings. That mis-steering causes RX-path latency spikes and noisy neighbor effects when many connections collide on the same hash (some of our production servers have 20-30K connections). set_rps_cpu() calls ndo_rx_flow_steer() with flow_id that is calculated by hashing the skb sized by the per rx-queue table size. This results in multiple connections (even across different rx-queues) getting the same hash value. The driver steer function modifies the wrong flow to use this rx-queue, e.g.: Flow#1 is first added: Flow#1: <ip1, port1, ip2, port2>, Hash 'h', q#10 Later when a new flow needs to be added: Flow#2: <ip3, port3, ip4, port4>, Hash 'h', q#20 The driver finds the hash 'h' from Flow#1 and updates it to use q#20. This results in both flows getting un-optimized - packets for Flow#1 goes to q#20, and then reprogrammed back to q#10 later and so on; and Flow #2 programming is never done as Flow#1 is matched first for all misses. Many flows may wrongly share the same hash and reprogram rules of the original flow each with their own q#. Tested on two 144-core servers with 16K netperf sessions for 180s. Netperf clients are pinned to cores 0-71 sequentially (so that wrong packets on q#s 72-143 can be measured). IRQs are set 1:1 for queues -> CPUs, enable XPS, enable aRFS (global value is 144 * rps_flow_cnt). Test notes about results from ice_rx_flow_steer(): --------------------------------------------------- 1. "Skip:" counter increments here: if (fltr_info->q_index == rxq_idx || arfs_entry->fltr_state != ICE_ARFS_ACTIVE) goto out; 2. "Add:" counter increments here: ret = arfs_entry->fltr_info.fltr_id; INIT_HLIST_NODE(&arfs_entry->list_entry); 3. "Update:" counter increments here: /* update the queue to forward to on an already existing flow */ Runtime comparison: original code vs with the patch for different rps_flow_cnt values. +-------------------------------+--------------+--------------+ | rps_flow_cnt | 512 | 2048 | +-------------------------------+--------------+--------------+ | Ratio of Pkts on Good:Bad q's | 214 vs 822K | 1.1M vs 980K | | Avoid wrong aRFS programming | 0 vs 310K | 0 vs 30K | | CPU User | 216 vs 183 | 216 vs 206 | | CPU System | 1441 vs 1171 | 1447 vs 1320 | | CPU Softirq | 1245 vs 920 | 1238 vs 961 | | CPU Total | 29 vs 22.7 | 29 vs 24.9 | | aRFS Update | 533K vs 59 | 521K vs 32 | | aRFS Skip | 82M vs 77M | 7.2M vs 4.5M | +-------------------------------+--------------+--------------+ A separate TCP_STREAM and TCP_RR with 1,4,8,16,64,128,256,512 connections showed no performance degradation. Some points on the patch/aRFS behavior: 1. Enabling full tuple matching ensures flows are always correctly matched, even with smaller hash sizes. 2. 5-6% drop in CPU utilization as the packets arrive at the correct CPUs and fewer calls to driver for programming on misses. 3. Larger hash tables reduces mis-steering due to more unique flow hashes, but still has clashes. However, with larger per-device rps_flow_cnt, old flows take more time to expire and new aRFS flows cannot be added if h/w limits are reached (rps_may_expire_flow() succeeds when 10*rps_flow_cnt pkts have been processed by this cpu that are not part of the flow). Fixes: 28bf267 ("ice: Implement aRFS") Signed-off-by: Krishna Kumar <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Rinitha S <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 10876da ] syzkaller reported a null-ptr-deref in sock_omalloc() while allocating a CALIPSO option. [0] The NULL is of struct sock, which was fetched by sk_to_full_sk() in calipso_req_setattr(). Since commit a1a5344 ("tcp: avoid two atomic ops for syncookies"), reqsk->rsk_listener could be NULL when SYN Cookie is returned to its client, as hinted by the leading SYN Cookie log. Here are 3 options to fix the bug: 1) Return 0 in calipso_req_setattr() 2) Return an error in calipso_req_setattr() 3) Alaways set rsk_listener 1) is no go as it bypasses LSM, but 2) effectively disables SYN Cookie for CALIPSO. 3) is also no go as there have been many efforts to reduce atomic ops and make TCP robust against DDoS. See also commit 3b24d85 ("tcp/dccp: do not touch listener sk_refcnt under synflood"). As of the blamed commit, SYN Cookie already did not need refcounting, and no one has stumbled on the bug for 9 years, so no CALIPSO user will care about SYN Cookie. Let's return an error in calipso_req_setattr() and calipso_req_delattr() in the SYN Cookie case. This can be reproduced by [1] on Fedora and now connect() of nc times out. [0]: TCP: request_sock_TCPv6: Possible SYN flooding on port [::]:20002. Sending cookies. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 3 UID: 0 PID: 12262 Comm: syz.1.2611 Not tainted 6.14.0 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_pnet include/net/net_namespace.h:406 [inline] RIP: 0010:sock_net include/net/sock.h:655 [inline] RIP: 0010:sock_kmalloc+0x35/0x170 net/core/sock.c:2806 Code: 89 d5 41 54 55 89 f5 53 48 89 fb e8 25 e3 c6 fd e8 f0 91 e3 00 48 8d 7b 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 26 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b RSP: 0018:ffff88811af89038 EFLAGS: 00010216 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffff888105266400 RDX: 0000000000000006 RSI: ffff88800c890000 RDI: 0000000000000030 RBP: 0000000000000050 R08: 0000000000000000 R09: ffff88810526640e R10: ffffed1020a4cc81 R11: ffff88810526640f R12: 0000000000000000 R13: 0000000000000820 R14: ffff888105266400 R15: 0000000000000050 FS: 00007f0653a07640(0000) GS:ffff88811af80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f863ba096f4 CR3: 00000000163c0005 CR4: 0000000000770ef0 PKRU: 80000000 Call Trace: <IRQ> ipv6_renew_options+0x279/0x950 net/ipv6/exthdrs.c:1288 calipso_req_setattr+0x181/0x340 net/ipv6/calipso.c:1204 calipso_req_setattr+0x56/0x80 net/netlabel/netlabel_calipso.c:597 netlbl_req_setattr+0x18a/0x440 net/netlabel/netlabel_kapi.c:1249 selinux_netlbl_inet_conn_request+0x1fb/0x320 security/selinux/netlabel.c:342 selinux_inet_conn_request+0x1eb/0x2c0 security/selinux/hooks.c:5551 security_inet_conn_request+0x50/0xa0 security/security.c:4945 tcp_v6_route_req+0x22c/0x550 net/ipv6/tcp_ipv6.c:825 tcp_conn_request+0xec8/0x2b70 net/ipv4/tcp_input.c:7275 tcp_v6_conn_request+0x1e3/0x440 net/ipv6/tcp_ipv6.c:1328 tcp_rcv_state_process+0xafa/0x52b0 net/ipv4/tcp_input.c:6781 tcp_v6_do_rcv+0x8a6/0x1a40 net/ipv6/tcp_ipv6.c:1667 tcp_v6_rcv+0x505e/0x5b50 net/ipv6/tcp_ipv6.c:1904 ip6_protocol_deliver_rcu+0x17c/0x1da0 net/ipv6/ip6_input.c:436 ip6_input_finish+0x103/0x180 net/ipv6/ip6_input.c:480 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ip6_input+0x13c/0x6b0 net/ipv6/ip6_input.c:491 dst_input include/net/dst.h:469 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] ip6_rcv_finish+0xb6/0x490 net/ipv6/ip6_input.c:69 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ipv6_rcv+0xf9/0x490 net/ipv6/ip6_input.c:309 __netif_receive_skb_one_core+0x12e/0x1f0 net/core/dev.c:5896 __netif_receive_skb+0x1d/0x170 net/core/dev.c:6009 process_backlog+0x41e/0x13b0 net/core/dev.c:6357 __napi_poll+0xbd/0x710 net/core/dev.c:7191 napi_poll net/core/dev.c:7260 [inline] net_rx_action+0x9de/0xde0 net/core/dev.c:7382 handle_softirqs+0x19a/0x770 kernel/softirq.c:561 do_softirq.part.0+0x36/0x70 kernel/softirq.c:462 </IRQ> <TASK> do_softirq arch/x86/include/asm/preempt.h:26 [inline] __local_bh_enable_ip+0xf1/0x110 kernel/softirq.c:389 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline] __dev_queue_xmit+0xc2a/0x3c40 net/core/dev.c:4679 dev_queue_xmit include/linux/netdevice.h:3313 [inline] neigh_hh_output include/net/neighbour.h:523 [inline] neigh_output include/net/neighbour.h:537 [inline] ip6_finish_output2+0xd69/0x1f80 net/ipv6/ip6_output.c:141 __ip6_finish_output net/ipv6/ip6_output.c:215 [inline] ip6_finish_output+0x5dc/0xd60 net/ipv6/ip6_output.c:226 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x24b/0x8d0 net/ipv6/ip6_output.c:247 dst_output include/net/dst.h:459 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ip6_xmit+0xbbc/0x20d0 net/ipv6/ip6_output.c:366 inet6_csk_xmit+0x39a/0x720 net/ipv6/inet6_connection_sock.c:135 __tcp_transmit_skb+0x1a7b/0x3b40 net/ipv4/tcp_output.c:1471 tcp_transmit_skb net/ipv4/tcp_output.c:1489 [inline] tcp_send_syn_data net/ipv4/tcp_output.c:4059 [inline] tcp_connect+0x1c0c/0x4510 net/ipv4/tcp_output.c:4148 tcp_v6_connect+0x156c/0x2080 net/ipv6/tcp_ipv6.c:333 __inet_stream_connect+0x3a7/0xed0 net/ipv4/af_inet.c:677 tcp_sendmsg_fastopen+0x3e2/0x710 net/ipv4/tcp.c:1039 tcp_sendmsg_locked+0x1e82/0x3570 net/ipv4/tcp.c:1091 tcp_sendmsg+0x2f/0x50 net/ipv4/tcp.c:1358 inet6_sendmsg+0xb9/0x150 net/ipv6/af_inet6.c:659 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0xf4/0x2a0 net/socket.c:733 __sys_sendto+0x29a/0x390 net/socket.c:2187 __do_sys_sendto net/socket.c:2194 [inline] __se_sys_sendto net/socket.c:2190 [inline] __x64_sys_sendto+0xe1/0x1c0 net/socket.c:2190 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xc3/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f06553c47ed Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f0653a06fc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f0655605fa0 RCX: 00007f06553c47ed RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000000000b RBP: 00007f065545db38 R08: 0000200000000140 R09: 000000000000001c R10: f7384d4ea84b01bd R11: 0000000000000246 R12: 0000000000000000 R13: 00007f0655605fac R14: 00007f0655606038 R15: 00007f06539e7000 </TASK> Modules linked in: [1]: dnf install -y selinux-policy-targeted policycoreutils netlabel_tools procps-ng nmap-ncat mount -t selinuxfs none /sys/fs/selinux load_policy netlabelctl calipso add pass doi:1 netlabelctl map del default netlabelctl map add default address:::1 protocol:calipso,1 sysctl net.ipv4.tcp_syncookies=2 nc -l ::1 80 & nc ::1 80 Fixes: e1adea9 ("calipso: Allow request sockets to be relabelled by the lsm.") Reported-by: syzkaller <[email protected]> Reported-by: John Cheung <[email protected]> Closes: https://lore.kernel.org/netdev/CAP=Rh=MvfhrGADy+-WJiftV2_WzMH4VEhEFmeT28qY+4yxNu4w@mail.gmail.com/ Signed-off-by: Kuniyuki Iwashima <[email protected]> Acked-by: Paul Moore <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 6aba0cb ] As-per the SBI specification, an SBI remote fence operation applies to the entire address space if either: 1) start_addr and size are both 0 2) size is equal to 2^XLEN-1 >From the above, only #1 is checked by SBI SFENCE calls so fix the size parameter check in SBI SFENCE calls to cover #2 as well. Fixes: 13acfec ("RISC-V: KVM: Add remote HFENCE functions based on VCPU requests") Reviewed-by: Atish Patra <[email protected]> Signed-off-by: Anup Patel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Anup Patel <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

The issue arises when kzalloc() is invoked while holding umem_mutex or any other lock acquired under umem_mutex. This is problematic because kzalloc() can trigger fs_reclaim_aqcuire(), which may, in turn, invoke mmu_notifier_invalidate_range_start(). This function can lead to mlx5_ib_invalidate_range(), which attempts to acquire umem_mutex again, resulting in a deadlock. The problematic flow: CPU0 | CPU1 ---------------------------------------|------------------------------------------------ mlx5_ib_dereg_mr() | → revoke_mr() | → mutex_lock(&umem_odp->umem_mutex) | | mlx5_mkey_cache_init() | → mutex_lock(&dev->cache.rb_lock) | → mlx5r_cache_create_ent_locked() | → kzalloc(GFP_KERNEL) | → fs_reclaim() | → mmu_notifier_invalidate_range_start() | → mlx5_ib_invalidate_range() | → mutex_lock(&umem_odp->umem_mutex) → cache_ent_find_and_store() | → mutex_lock(&dev->cache.rb_lock) | Additionally, when kzalloc() is called from within cache_ent_find_and_store(), we encounter the same deadlock due to re-acquisition of umem_mutex. Solve by releasing umem_mutex in dereg_mr() after umr_revoke_mr() and before acquiring rb_lock. This ensures that we don't hold umem_mutex while performing memory allocations that could trigger the reclaim path. This change prevents the deadlock by ensuring proper lock ordering and avoiding holding locks during memory allocation operations that could trigger the reclaim path. The following lockdep warning demonstrates the deadlock: python3/20557 is trying to acquire lock: ffff888387542128 (&umem_odp->umem_mutex){+.+.}-{4:4}, at: mlx5_ib_invalidate_range+0x5b/0x550 [mlx5_ib] but task is already holding lock: ffffffff82f6b840 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}, at: unmap_vmas+0x7b/0x1a0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}: fs_reclaim_acquire+0x60/0xd0 mem_cgroup_css_alloc+0x6f/0x9b0 cgroup_init_subsys+0xa4/0x240 cgroup_init+0x1c8/0x510 start_kernel+0x747/0x760 x86_64_start_reservations+0x25/0x30 x86_64_start_kernel+0x73/0x80 common_startup_64+0x129/0x138 -> #2 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire+0x91/0xd0 __kmalloc_cache_noprof+0x4d/0x4c0 mlx5r_cache_create_ent_locked+0x75/0x620 [mlx5_ib] mlx5_mkey_cache_init+0x186/0x360 [mlx5_ib] mlx5_ib_stage_post_ib_reg_umr_init+0x3c/0x60 [mlx5_ib] __mlx5_ib_add+0x4b/0x190 [mlx5_ib] mlx5r_probe+0xd9/0x320 [mlx5_ib] auxiliary_bus_probe+0x42/0x70 really_probe+0xdb/0x360 __driver_probe_device+0x8f/0x130 driver_probe_device+0x1f/0xb0 __driver_attach+0xd4/0x1f0 bus_for_each_dev+0x79/0xd0 bus_add_driver+0xf0/0x200 driver_register+0x6e/0xc0 __auxiliary_driver_register+0x6a/0xc0 do_one_initcall+0x5e/0x390 do_init_module+0x88/0x240 init_module_from_file+0x85/0xc0 idempotent_init_module+0x104/0x300 __x64_sys_finit_module+0x68/0xc0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 -> #1 (&dev->cache.rb_lock){+.+.}-{4:4}: __mutex_lock+0x98/0xf10 __mlx5_ib_dereg_mr+0x6f2/0x890 [mlx5_ib] mlx5_ib_dereg_mr+0x21/0x110 [mlx5_ib] ib_dereg_mr_user+0x85/0x1f0 [ib_core] uverbs_free_mr+0x19/0x30 [ib_uverbs] destroy_hw_idr_uobject+0x21/0x80 [ib_uverbs] uverbs_destroy_uobject+0x60/0x3d0 [ib_uverbs] uobj_destroy+0x57/0xa0 [ib_uverbs] ib_uverbs_cmd_verbs+0x4d5/0x1210 [ib_uverbs] ib_uverbs_ioctl+0x129/0x230 [ib_uverbs] __x64_sys_ioctl+0x596/0xaa0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 -> #0 (&umem_odp->umem_mutex){+.+.}-{4:4}: __lock_acquire+0x1826/0x2f00 lock_acquire+0xd3/0x2e0 __mutex_lock+0x98/0xf10 mlx5_ib_invalidate_range+0x5b/0x550 [mlx5_ib] __mmu_notifier_invalidate_range_start+0x18e/0x1f0 unmap_vmas+0x182/0x1a0 exit_mmap+0xf3/0x4a0 mmput+0x3a/0x100 do_exit+0x2b9/0xa90 do_group_exit+0x32/0xa0 get_signal+0xc32/0xcb0 arch_do_signal_or_restart+0x29/0x1d0 syscall_exit_to_user_mode+0x105/0x1d0 do_syscall_64+0x79/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Chain exists of: &dev->cache.rb_lock --> mmu_notifier_invalidate_range_start --> &umem_odp->umem_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&umem_odp->umem_mutex); lock(mmu_notifier_invalidate_range_start); lock(&umem_odp->umem_mutex); lock(&dev->cache.rb_lock); *** DEADLOCK *** Fixes: abb604a ("RDMA/mlx5: Fix a race for an ODP MR which leads to CQE with error") Signed-off-by: Or Har-Toov <[email protected]> Reviewed-by: Michael Guralnik <[email protected]> Link: https://patch.msgid.link/3c8f225a8a9fade647d19b014df1172544643e4a.1750061612.git.leon@kernel.org Signed-off-by: Leon Romanovsky <[email protected]>

The WARN_ON_ONCE is introduced on truncate_folio_batch_exceptionals() to capture whether the filesystem has removed all DAX entries or not. And the fix has been applied on the filesystem xfs and ext4 by the commit 0e2f80a ("fs/dax: ensure all pages are idle prior to filesystem unmount"). Apply the missed fix on filesystem fuse to fix the runtime warning: [ 2.011450] ------------[ cut here ]------------ [ 2.011873] WARNING: CPU: 0 PID: 145 at mm/truncate.c:89 truncate_folio_batch_exceptionals+0x272/0x2b0 [ 2.012468] Modules linked in: [ 2.012718] CPU: 0 UID: 1000 PID: 145 Comm: weston Not tainted 6.16.0-rc2-WSL2-STABLE #2 PREEMPT(undef) [ 2.013292] RIP: 0010:truncate_folio_batch_exceptionals+0x272/0x2b0 [ 2.013704] Code: 48 63 d0 41 29 c5 48 8d 1c d5 00 00 00 00 4e 8d 6c 2a 01 49 c1 e5 03 eb 09 48 83 c3 08 49 39 dd 74 83 41 f6 44 1c 08 01 74 ef <0f> 0b 49 8b 34 1e 48 89 ef e8 10 a2 17 00 eb df 48 8b 7d 00 e8 35 [ 2.014845] RSP: 0018:ffffa47ec33f3b10 EFLAGS: 00010202 [ 2.015279] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 2.015884] RDX: 0000000000000000 RSI: ffffa47ec33f3ca0 RDI: ffff98aa44f3fa80 [ 2.016377] RBP: ffff98aa44f3fbf0 R08: ffffa47ec33f3ba8 R09: 0000000000000000 [ 2.016942] R10: 0000000000000001 R11: 0000000000000000 R12: ffffa47ec33f3ca0 [ 2.017437] R13: 0000000000000008 R14: ffffa47ec33f3ba8 R15: 0000000000000000 [ 2.017972] FS: 000079ce006afa40(0000) GS:ffff98aade441000(0000) knlGS:0000000000000000 [ 2.018510] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2.018987] CR2: 000079ce03e74000 CR3: 000000010784f006 CR4: 0000000000372eb0 [ 2.019518] Call Trace: [ 2.019729] <TASK> [ 2.019901] truncate_inode_pages_range+0xd8/0x400 [ 2.020280] ? timerqueue_add+0x66/0xb0 [ 2.020574] ? get_nohz_timer_target+0x2a/0x140 [ 2.020904] ? timerqueue_add+0x66/0xb0 [ 2.021231] ? timerqueue_del+0x2e/0x50 [ 2.021646] ? __remove_hrtimer+0x39/0x90 [ 2.022017] ? srso_alias_untrain_ret+0x1/0x10 [ 2.022497] ? psi_group_change+0x136/0x350 [ 2.023046] ? _raw_spin_unlock+0xe/0x30 [ 2.023514] ? finish_task_switch.isra.0+0x8d/0x280 [ 2.024068] ? __schedule+0x532/0xbd0 [ 2.024551] fuse_evict_inode+0x29/0x190 [ 2.025131] evict+0x100/0x270 [ 2.025641] ? _atomic_dec_and_lock+0x39/0x50 [ 2.026316] ? __pfx_generic_delete_inode+0x10/0x10 [ 2.026843] __dentry_kill+0x71/0x180 [ 2.027335] dput+0xeb/0x1b0 [ 2.027725] __fput+0x136/0x2b0 [ 2.028054] __x64_sys_close+0x3d/0x80 [ 2.028469] do_syscall_64+0x6d/0x1b0 [ 2.028832] ? clear_bhb_loop+0x30/0x80 [ 2.029182] ? clear_bhb_loop+0x30/0x80 [ 2.029533] ? clear_bhb_loop+0x30/0x80 [ 2.029902] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 2.030423] RIP: 0033:0x79ce03d0d067 [ 2.030820] Code: b8 ff ff ff ff e9 3e ff ff ff 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 c3 a7 f8 ff [ 2.032354] RSP: 002b:00007ffef0498948 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 [ 2.032939] RAX: ffffffffffffffda RBX: 00007ffef0498960 RCX: 000079ce03d0d067 [ 2.033612] RDX: 0000000000000003 RSI: 0000000000001000 RDI: 000000000000000d [ 2.034289] RBP: 00007ffef0498a30 R08: 000000000000000d R09: 0000000000000000 [ 2.034944] R10: 00007ffef0498978 R11: 0000000000000246 R12: 0000000000000001 [ 2.035610] R13: 00007ffef0498960 R14: 000079ce03e09ce0 R15: 0000000000000003 [ 2.036301] </TASK> [ 2.036532] ---[ end trace 0000000000000000 ]--- Link: https://lkml.kernel.org/r/[email protected] Fixes: bde708f ("fs/dax: always remove DAX page-cache entries when breaking layouts") Signed-off-by: Haiyue Wang <[email protected]> Cc: Alistair Popple <[email protected]> Cc: Dan Williams <[email protected]> Cc: Miklos Szeredi <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

Fix cifs_signal_cifsd_for_reconnect() to take the correct lock order and prevent the following deadlock from happening ====================================================== WARNING: possible circular locking dependency detected 6.16.0-rc3-build2+ torvalds#1301 Tainted: G S W ------------------------------------------------------ cifsd/6055 is trying to acquire lock: ffff88810ad56038 (&tcp_ses->srv_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x134/0x200 but task is already holding lock: ffff888119c64330 (&ret_buf->chan_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0xcf/0x200 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&ret_buf->chan_lock){+.+.}-{3:3}: validate_chain+0x1cf/0x270 __lock_acquire+0x60e/0x780 lock_acquire.part.0+0xb4/0x1f0 _raw_spin_lock+0x2f/0x40 cifs_setup_session+0x81/0x4b0 cifs_get_smb_ses+0x771/0x900 cifs_mount_get_session+0x7e/0x170 cifs_mount+0x92/0x2d0 cifs_smb3_do_mount+0x161/0x460 smb3_get_tree+0x55/0x90 vfs_get_tree+0x46/0x180 do_new_mount+0x1b0/0x2e0 path_mount+0x6ee/0x740 do_mount+0x98/0xe0 __do_sys_mount+0x148/0x180 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&ret_buf->ses_lock){+.+.}-{3:3}: validate_chain+0x1cf/0x270 __lock_acquire+0x60e/0x780 lock_acquire.part.0+0xb4/0x1f0 _raw_spin_lock+0x2f/0x40 cifs_match_super+0x101/0x320 sget+0xab/0x270 cifs_smb3_do_mount+0x1e0/0x460 smb3_get_tree+0x55/0x90 vfs_get_tree+0x46/0x180 do_new_mount+0x1b0/0x2e0 path_mount+0x6ee/0x740 do_mount+0x98/0xe0 __do_sys_mount+0x148/0x180 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&tcp_ses->srv_lock){+.+.}-{3:3}: check_noncircular+0x95/0xc0 check_prev_add+0x115/0x2f0 validate_chain+0x1cf/0x270 __lock_acquire+0x60e/0x780 lock_acquire.part.0+0xb4/0x1f0 _raw_spin_lock+0x2f/0x40 cifs_signal_cifsd_for_reconnect+0x134/0x200 __cifs_reconnect+0x8f/0x500 cifs_handle_standard+0x112/0x280 cifs_demultiplex_thread+0x64d/0xbc0 kthread+0x2f7/0x310 ret_from_fork+0x2a/0x230 ret_from_fork_asm+0x1a/0x30 other info that might help us debug this: Chain exists of: &tcp_ses->srv_lock --> &ret_buf->ses_lock --> &ret_buf->chan_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ret_buf->chan_lock); lock(&ret_buf->ses_lock); lock(&ret_buf->chan_lock); lock(&tcp_ses->srv_lock); *** DEADLOCK *** 3 locks held by cifsd/6055: #0: ffffffff857de398 (&cifs_tcp_ses_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x7b/0x200 #1: ffff888119c64060 (&ret_buf->ses_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x9c/0x200 #2: ffff888119c64330 (&ret_buf->chan_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0xcf/0x200 Cc: [email protected] Reported-by: David Howells <[email protected]> Fixes: d7d7a66 ("cifs: avoid use of global locks for high contention data") Reviewed-by: David Howells <[email protected]> Tested-by: David Howells <[email protected]> Signed-off-by: Paulo Alcantara (Red Hat) <[email protected]> Signed-off-by: David Howells <[email protected]> Signed-off-by: Steve French <[email protected]>

When I run the NVME over TCP test in virtme-ng, I get the following "suspicious RCU usage" warning in nvme_mpath_add_sysfs_link(): ''' [ 5.024557][ T44] nvmet: Created nvm controller 1 for subsystem nqn.2025-06.org.nvmexpress.mptcp for NQN nqn.2014-08.org.nvmexpress:uuid:f7f6b5e0-ff97-4894-98ac-c85309e0bc77. [ 5.027401][ T183] nvme nvme0: creating 2 I/O queues. [ 5.029017][ T183] nvme nvme0: mapped 2/0/0 default/read/poll queues. [ 5.032587][ T183] nvme nvme0: new ctrl: NQN "nqn.2025-06.org.nvmexpress.mptcp", addr 127.0.0.1:4420, hostnqn: nqn.2014-08.org.nvmexpress:uuid:f7f6b5e0-ff97-4894-98ac-c85309e0bc77 [ 5.042214][ T25] [ 5.042440][ T25] ============================= [ 5.042579][ T25] WARNING: suspicious RCU usage [ 5.042705][ T25] 6.16.0-rc3+ torvalds#23 Not tainted [ 5.042812][ T25] ----------------------------- [ 5.042934][ T25] drivers/nvme/host/multipath.c:1203 RCU-list traversed in non-reader section!! [ 5.043111][ T25] [ 5.043111][ T25] other info that might help us debug this: [ 5.043111][ T25] [ 5.043341][ T25] [ 5.043341][ T25] rcu_scheduler_active = 2, debug_locks = 1 [ 5.043502][ T25] 3 locks held by kworker/u9:0/25: [ 5.043615][ T25] #0: ffff888008730948 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x7ed/0x1350 [ 5.043830][ T25] #1: ffffc900001afd40 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0xcf3/0x1350 [ 5.044084][ T25] #2: ffff888013ee0020 (&head->srcu){.+.+}-{0:0}, at: nvme_mpath_add_sysfs_link.part.0+0xb4/0x3a0 [ 5.044300][ T25] [ 5.044300][ T25] stack backtrace: [ 5.044439][ T25] CPU: 0 UID: 0 PID: 25 Comm: kworker/u9:0 Not tainted 6.16.0-rc3+ torvalds#23 PREEMPT(full) [ 5.044441][ T25] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 5.044442][ T25] Workqueue: async async_run_entry_fn [ 5.044445][ T25] Call Trace: [ 5.044446][ T25] <TASK> [ 5.044449][ T25] dump_stack_lvl+0x6f/0xb0 [ 5.044453][ T25] lockdep_rcu_suspicious.cold+0x4f/0xb1 [ 5.044457][ T25] nvme_mpath_add_sysfs_link.part.0+0x2fb/0x3a0 [ 5.044459][ T25] ? queue_work_on+0x90/0xf0 [ 5.044461][ T25] ? lockdep_hardirqs_on+0x78/0x110 [ 5.044466][ T25] nvme_mpath_set_live+0x1e9/0x4f0 [ 5.044470][ T25] nvme_mpath_add_disk+0x240/0x2f0 [ 5.044472][ T25] ? __pfx_nvme_mpath_add_disk+0x10/0x10 [ 5.044475][ T25] ? add_disk_fwnode+0x361/0x580 [ 5.044480][ T25] nvme_alloc_ns+0x81c/0x17c0 [ 5.044483][ T25] ? kasan_quarantine_put+0x104/0x240 [ 5.044487][ T25] ? __pfx_nvme_alloc_ns+0x10/0x10 [ 5.044495][ T25] ? __pfx_nvme_find_get_ns+0x10/0x10 [ 5.044496][ T25] ? rcu_read_lock_any_held+0x45/0xa0 [ 5.044498][ T25] ? validate_chain+0x232/0x4f0 [ 5.044503][ T25] nvme_scan_ns+0x4c8/0x810 [ 5.044506][ T25] ? __pfx_nvme_scan_ns+0x10/0x10 [ 5.044508][ T25] ? find_held_lock+0x2b/0x80 [ 5.044512][ T25] ? ktime_get+0x16d/0x220 [ 5.044517][ T25] ? kvm_clock_get_cycles+0x18/0x30 [ 5.044520][ T25] ? __pfx_nvme_scan_ns_async+0x10/0x10 [ 5.044522][ T25] async_run_entry_fn+0x97/0x560 [ 5.044523][ T25] ? rcu_is_watching+0x12/0xc0 [ 5.044526][ T25] process_one_work+0xd3c/0x1350 [ 5.044532][ T25] ? __pfx_process_one_work+0x10/0x10 [ 5.044536][ T25] ? assign_work+0x16c/0x240 [ 5.044539][ T25] worker_thread+0x4da/0xd50 [ 5.044545][ T25] ? __pfx_worker_thread+0x10/0x10 [ 5.044546][ T25] kthread+0x356/0x5c0 [ 5.044548][ T25] ? __pfx_kthread+0x10/0x10 [ 5.044549][ T25] ? ret_from_fork+0x1b/0x2e0 [ 5.044552][ T25] ? __lock_release.isra.0+0x5d/0x180 [ 5.044553][ T25] ? ret_from_fork+0x1b/0x2e0 [ 5.044555][ T25] ? rcu_is_watching+0x12/0xc0 [ 5.044557][ T25] ? __pfx_kthread+0x10/0x10 [ 5.044559][ T25] ret_from_fork+0x218/0x2e0 [ 5.044561][ T25] ? __pfx_kthread+0x10/0x10 [ 5.044562][ T25] ret_from_fork_asm+0x1a/0x30 [ 5.044570][ T25] </TASK> ''' This patch uses sleepable RCU version of helper list_for_each_entry_srcu() instead of list_for_each_entry_rcu() to fix it. Fixes: 4dbd2b2 ("nvme-multipath: Add visibility for round-robin io-policy") Signed-off-by: Geliang Tang <[email protected]> Reviewed-by: Keith Busch <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Reviewed-by: Nilay Shroff <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>

With VIRTCHNL2_CAP_MACFILTER enabled, the following warning is generated on module load: [ 324.701677] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:578 [ 324.701684] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1582, name: NetworkManager [ 324.701689] preempt_count: 201, expected: 0 [ 324.701693] RCU nest depth: 0, expected: 0 [ 324.701697] 2 locks held by NetworkManager/1582: [ 324.701702] #0: ffffffff9f7be770 (rtnl_mutex){....}-{3:3}, at: rtnl_newlink+0x791/0x21e0 [ 324.701730] #1: ff1100216c380368 (_xmit_ETHER){....}-{2:2}, at: __dev_open+0x3f0/0x870 [ 324.701749] Preemption disabled at: [ 324.701752] [<ffffffff9cd23b9d>] __dev_open+0x3dd/0x870 [ 324.701765] CPU: 30 UID: 0 PID: 1582 Comm: NetworkManager Not tainted 6.15.0-rc5+ #2 PREEMPT(voluntary) [ 324.701771] Hardware name: Intel Corporation M50FCP2SBSTD/M50FCP2SBSTD, BIOS SE5C741.86B.01.01.0001.2211140926 11/14/2022 [ 324.701774] Call Trace: [ 324.701777] <TASK> [ 324.701779] dump_stack_lvl+0x5d/0x80 [ 324.701788] ? __dev_open+0x3dd/0x870 [ 324.701793] __might_resched.cold+0x1ef/0x23d <..> [ 324.701818] __mutex_lock+0x113/0x1b80 <..> [ 324.701917] idpf_ctlq_clean_sq+0xad/0x4b0 [idpf] [ 324.701935] ? kasan_save_track+0x14/0x30 [ 324.701941] idpf_mb_clean+0x143/0x380 [idpf] <..> [ 324.701991] idpf_send_mb_msg+0x111/0x720 [idpf] [ 324.702009] idpf_vc_xn_exec+0x4cc/0x990 [idpf] [ 324.702021] ? rcu_is_watching+0x12/0xc0 [ 324.702035] idpf_add_del_mac_filters+0x3ed/0xb50 [idpf] <..> [ 324.702122] __hw_addr_sync_dev+0x1cf/0x300 [ 324.702126] ? find_held_lock+0x32/0x90 [ 324.702134] idpf_set_rx_mode+0x317/0x390 [idpf] [ 324.702152] __dev_open+0x3f8/0x870 [ 324.702159] ? __pfx___dev_open+0x10/0x10 [ 324.702174] __dev_change_flags+0x443/0x650 <..> [ 324.702208] netif_change_flags+0x80/0x160 [ 324.702218] do_setlink.isra.0+0x16a0/0x3960 <..> [ 324.702349] rtnl_newlink+0x12fd/0x21e0 The sequence is as follows: rtnl_newlink()-> __dev_change_flags()-> __dev_open()-> dev_set_rx_mode() - > # disables BH and grabs "dev->addr_list_lock" idpf_set_rx_mode() -> # proceed only if VIRTCHNL2_CAP_MACFILTER is ON __dev_uc_sync() -> idpf_add_mac_filter -> idpf_add_del_mac_filters -> idpf_send_mb_msg() -> idpf_mb_clean() -> idpf_ctlq_clean_sq() # mutex_lock(cq_lock) Fix by converting cq_lock to a spinlock. All operations under the new lock are safe except freeing the DMA memory, which may use vunmap(). Fix by requesting a contiguous physical memory for the DMA mapping. Fixes: a251eee ("idpf: add SRIOV support and other ndo_ops") Reviewed-by: Aleksandr Loktionov <[email protected]> Signed-off-by: Ahmed Zaki <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Samuel Salin <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>

…-flight Reject migration of SEV{-ES} state if either the source or destination VM is actively creating a vCPU, i.e. if kvm_vm_ioctl_create_vcpu() is in the section between incrementing created_vcpus and online_vcpus. The bulk of vCPU creation runs _outside_ of kvm->lock to allow creating multiple vCPUs in parallel, and so sev_info.es_active can get toggled from false=>true in the destination VM after (or during) svm_vcpu_create(), resulting in an SEV{-ES} VM effectively having a non-SEV{-ES} vCPU. The issue manifests most visibly as a crash when trying to free a vCPU's NULL VMSA page in an SEV-ES VM, but any number of things can go wrong. BUG: unable to handle page fault for address: ffffebde00000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP KASAN NOPTI CPU: 227 UID: 0 PID: 64063 Comm: syz.5.60023 Tainted: G U O 6.15.0-smp-DEV #2 NONE Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.52.0-0 10/28/2024 RIP: 0010:constant_test_bit arch/x86/include/asm/bitops.h:206 [inline] RIP: 0010:arch_test_bit arch/x86/include/asm/bitops.h:238 [inline] RIP: 0010:_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:142 [inline] RIP: 0010:PageHead include/linux/page-flags.h:866 [inline] RIP: 0010:___free_pages+0x3e/0x120 mm/page_alloc.c:5067 Code: <49> f7 06 40 00 00 00 75 05 45 31 ff eb 0c 66 90 4c 89 f0 4c 39 f0 RSP: 0018:ffff8984551978d0 EFLAGS: 00010246 RAX: 0000777f80000001 RBX: 0000000000000000 RCX: ffffffff918aeb98 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffebde00000000 RBP: 0000000000000000 R08: ffffebde00000007 R09: 1ffffd7bc0000000 R10: dffffc0000000000 R11: fffff97bc0000001 R12: dffffc0000000000 R13: ffff8983e19751a8 R14: ffffebde00000000 R15: 1ffffd7bc0000000 FS: 0000000000000000(0000) GS:ffff89ee661d3000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffebde00000000 CR3: 000000793ceaa000 CR4: 0000000000350ef0 DR0: 0000000000000000 DR1: 0000000000000b5f DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: <TASK> sev_free_vcpu+0x413/0x630 arch/x86/kvm/svm/sev.c:3169 svm_vcpu_free+0x13a/0x2a0 arch/x86/kvm/svm/svm.c:1515 kvm_arch_vcpu_destroy+0x6a/0x1d0 arch/x86/kvm/x86.c:12396 kvm_vcpu_destroy virt/kvm/kvm_main.c:470 [inline] kvm_destroy_vcpus+0xd1/0x300 virt/kvm/kvm_main.c:490 kvm_arch_destroy_vm+0x636/0x820 arch/x86/kvm/x86.c:12895 kvm_put_kvm+0xb8e/0xfb0 virt/kvm/kvm_main.c:1310 kvm_vm_release+0x48/0x60 virt/kvm/kvm_main.c:1369 __fput+0x3e4/0x9e0 fs/file_table.c:465 task_work_run+0x1a9/0x220 kernel/task_work.c:227 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0x7f0/0x25b0 kernel/exit.c:953 do_group_exit+0x203/0x2d0 kernel/exit.c:1102 get_signal+0x1357/0x1480 kernel/signal.c:3034 arch_do_signal_or_restart+0x40/0x690 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop kernel/entry/common.c:111 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x67/0xb0 kernel/entry/common.c:218 do_syscall_64+0x7c/0x150 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f87a898e969 </TASK> Modules linked in: gq(O) gsmi: Log Shutdown Reason 0x03 CR2: ffffebde00000000 ---[ end trace 0000000000000000 ]--- Deliberately don't check for a NULL VMSA when freeing the vCPU, as crashing the host is likely desirable due to the VMSA being consumed by hardware. E.g. if KVM manages to allow VMRUN on the vCPU, hardware may read/write a bogus VMSA page. Accessing PFN 0 is "fine"-ish now that it's sequestered away thanks to L1TF, but panicking in this scenario is preferable to potentially running with corrupted state. Reported-by: Alexander Potapenko <[email protected]> Tested-by: Alexander Potapenko <[email protected]> Fixes: 0b020f5 ("KVM: SEV: Add support for SEV-ES intra host migration") Fixes: b566393 ("KVM: SEV: Add support for SEV intra host migration") Cc: [email protected] Cc: James Houghton <[email protected]> Cc: Peter Gonda <[email protected]> Reviewed-by: Liam Merwick <[email protected]> Tested-by: Liam Merwick <[email protected]> Reviewed-by: James Houghton <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Christopherson <[email protected]>

If "try_verify_in_tasklet" is set for dm-verity, DM_BUFIO_CLIENT_NO_SLEEP is enabled for dm-bufio. However, when bufio tries to evict buffers, there is a chance to trigger scheduling in spin_lock_bh, the following warning is hit: BUG: sleeping function called from invalid context at drivers/md/dm-bufio.c:2745 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 123, name: kworker/2:2 preempt_count: 201, expected: 0 RCU nest depth: 0, expected: 0 4 locks held by kworker/2:2/123: #0: ffff88800a2d1548 ((wq_completion)dm_bufio_cache){....}-{0:0}, at: process_one_work+0xe46/0x1970 #1: ffffc90000d97d20 ((work_completion)(&dm_bufio_replacement_work)){....}-{0:0}, at: process_one_work+0x763/0x1970 #2: ffffffff8555b528 (dm_bufio_clients_lock){....}-{3:3}, at: do_global_cleanup+0x1ce/0x710 #3: ffff88801d5820b8 (&c->spinlock){....}-{2:2}, at: do_global_cleanup+0x2a5/0x710 Preemption disabled at: [<0000000000000000>] 0x0 CPU: 2 UID: 0 PID: 123 Comm: kworker/2:2 Not tainted 6.16.0-rc3-g90548c634bd0 torvalds#305 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: dm_bufio_cache do_global_cleanup Call Trace: <TASK> dump_stack_lvl+0x53/0x70 __might_resched+0x360/0x4e0 do_global_cleanup+0x2f5/0x710 process_one_work+0x7db/0x1970 worker_thread+0x518/0xea0 kthread+0x359/0x690 ret_from_fork+0xf3/0x1b0 ret_from_fork_asm+0x1a/0x30 </TASK> That can be reproduced by: veritysetup format --data-block-size=4096 --hash-block-size=4096 /dev/vda /dev/vdb SIZE=$(blockdev --getsz /dev/vda) dmsetup create myverity -r --table "0 $SIZE verity 1 /dev/vda /dev/vdb 4096 4096 <data_blocks> 1 sha256 <root_hash> <salt> 1 try_verify_in_tasklet" mount /dev/dm-0 /mnt -o ro echo 102400 > /sys/module/dm_bufio/parameters/max_cache_size_bytes [read files in /mnt] Cc: [email protected] # v6.4+ Fixes: 450e8de ("dm bufio: improve concurrent IO performance") Signed-off-by: Wang Shuai <[email protected]> Signed-off-by: Sheng Yong <[email protected]> Signed-off-by: Mikulas Patocka <[email protected]>

If the PHY driver uses another PHY internally (e.g. in case of eUSB2, repeaters are represented as PHYs), then it would trigger the following lockdep splat because all PHYs use a single static lockdep key and thus lockdep can not identify whether there is a dependency or not and reports a false positive. Make PHY subsystem use dynamic lockdep keys, assigning each driver a separate key. This way lockdep can correctly identify dependency graph between mutexes. ============================================ WARNING: possible recursive locking detected 6.15.0-rc7-next-20250522-12896-g3932f283970c #3455 Not tainted -------------------------------------------- kworker/u51:0/78 is trying to acquire lock: ffff0008116554f0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c but task is already holding lock: ffff000813c10cf0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&phy->mutex); lock(&phy->mutex); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/u51:0/78: #0: ffff000800010948 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x18c/0x5ec #1: ffff80008036bdb0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x1b4/0x5ec #2: ffff0008094ac8f8 (&dev->mutex){....}-{4:4}, at: __device_attach+0x38/0x188 #3: ffff000813c10cf0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c stack backtrace: CPU: 0 UID: 0 PID: 78 Comm: kworker/u51:0 Not tainted 6.15.0-rc7-next-20250522-12896-g3932f283970c #3455 PREEMPT Hardware name: Qualcomm CRD, BIOS 6.0.240904.BOOT.MXF.2.4-00528.1-HAMOA-1 09/ 4/2024 Workqueue: events_unbound deferred_probe_work_func Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0x90/0xd0 dump_stack+0x18/0x24 print_deadlock_bug+0x258/0x348 __lock_acquire+0x10fc/0x1f84 lock_acquire+0x1c8/0x338 __mutex_lock+0xb8/0x59c mutex_lock_nested+0x24/0x30 phy_init+0x4c/0x12c snps_eusb2_hsphy_init+0x54/0x1a0 phy_init+0xe0/0x12c dwc3_core_init+0x450/0x10b4 dwc3_core_probe+0xce4/0x15fc dwc3_probe+0x64/0xb0 platform_probe+0x68/0xc4 really_probe+0xbc/0x298 __driver_probe_device+0x78/0x12c driver_probe_device+0x3c/0x160 __device_attach_driver+0xb8/0x138 bus_for_each_drv+0x84/0xe0 __device_attach+0x9c/0x188 device_initial_probe+0x14/0x20 bus_probe_device+0xac/0xb0 deferred_probe_work_func+0x8c/0xc8 process_one_work+0x208/0x5ec worker_thread+0x1c0/0x368 kthread+0x14c/0x20c ret_from_fork+0x10/0x20 Fixes: 3584f63 ("phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater") Fixes: e246355 ("phy: amlogic: Add Amlogic AXG PCIE PHY Driver") Reviewed-by: Neil Armstrong <[email protected]> Reviewed-by: Abel Vesa <[email protected]> Reported-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/lkml/[email protected]/ Reviewed-by: Johan Hovold <[email protected]> Tested-by: Johan Hovold <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>

With CONFIG_DEBUG_OBJECTS_TIMERS unloading hfcpci module leads to the following splat: [ 250.215892] ODEBUG: assert_init not available (active state 0) object: ffffffffc01a3dc0 object type: timer_list hint: 0x0 [ 250.217520] WARNING: CPU: 0 PID: 233 at lib/debugobjects.c:612 debug_print_object+0x1b6/0x2c0 [ 250.218775] Modules linked in: hfcpci(-) mISDN_core [ 250.219537] CPU: 0 UID: 0 PID: 233 Comm: rmmod Not tainted 6.17.0-rc2-g6f713187ac98 #2 PREEMPT(voluntary) [ 250.220940] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 250.222377] RIP: 0010:debug_print_object+0x1b6/0x2c0 [ 250.223131] Code: fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 75 4f 41 56 48 8b 14 dd a0 4e 01 9f 48 89 ee 48 c7 c7 20 46 01 9f e8 cb 84d [ 250.225805] RSP: 0018:ffff888015ea7c08 EFLAGS: 00010286 [ 250.226608] RAX: 0000000000000000 RBX: 0000000000000005 RCX: ffffffff9be93a95 [ 250.227708] RDX: 1ffff1100d945138 RSI: 0000000000000008 RDI: ffff88806ca289c0 [ 250.228993] RBP: ffffffff9f014a00 R08: 0000000000000001 R09: ffffed1002bd4f39 [ 250.230043] R10: ffff888015ea79cf R11: 0000000000000001 R12: 0000000000000001 [ 250.231185] R13: ffffffff9eea0520 R14: 0000000000000000 R15: ffff888015ea7cc8 [ 250.232454] FS: 00007f3208f01540(0000) GS:ffff8880caf5a000(0000) knlGS:0000000000000000 [ 250.233851] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 250.234856] CR2: 00007f32090a7421 CR3: 0000000004d63000 CR4: 00000000000006f0 [ 250.236117] Call Trace: [ 250.236599] <TASK> [ 250.236967] ? trace_irq_enable.constprop.0+0xd4/0x130 [ 250.237920] debug_object_assert_init+0x1f6/0x310 [ 250.238762] ? __pfx_debug_object_assert_init+0x10/0x10 [ 250.239658] ? __lock_acquire+0xdea/0x1c70 [ 250.240369] __try_to_del_timer_sync+0x69/0x140 [ 250.241172] ? __pfx___try_to_del_timer_sync+0x10/0x10 [ 250.242058] ? __timer_delete_sync+0xc6/0x120 [ 250.242842] ? lock_acquire+0x30/0x80 [ 250.243474] ? __timer_delete_sync+0xc6/0x120 [ 250.244262] __timer_delete_sync+0x98/0x120 [ 250.245015] HFC_cleanup+0x10/0x20 [hfcpci] [ 250.245704] __do_sys_delete_module+0x348/0x510 [ 250.246461] ? __pfx___do_sys_delete_module+0x10/0x10 [ 250.247338] do_syscall_64+0xc1/0x360 [ 250.247924] entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by initializing hfc_tl timer with DEFINE_TIMER macro. Also, use mod_timer instead of manual timeout update. Fixes: 87c5fa1 ("mISDN: Add different different timer settings for hfc-pci") Fixes: 175302f ("mISDN: hfcpci: Fix use-after-free bug in hfcpci_softirq") Signed-off-by: Vladimir Riabchun <[email protected]> Link: https://patch.msgid.link/aKiy2D_LiWpQ5kXq@vova-pc Signed-off-by: Jakub Kicinski <[email protected]>

These iterations require the read lock, otherwise RCU lockdep will splat: ============================= WARNING: suspicious RCU usage 6.17.0-rc3-00014-g31419c045d64 #6 Tainted: G O ----------------------------- drivers/base/power/main.c:1333 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 5 locks held by rtcwake/547: #0: 00000000643ab418 (sb_writers#6){.+.+}-{0:0}, at: file_start_write+0x2b/0x3a #1: 0000000067a0ca88 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0x181/0x24b #2: 00000000631eac40 (kn->active#3){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x191/0x24b #3: 00000000609a1308 (system_transition_mutex){+.+.}-{4:4}, at: pm_suspend+0xaf/0x30b #4: 0000000060c0fdb0 (device_links_srcu){.+.+}-{0:0}, at: device_links_read_lock+0x75/0x98 stack backtrace: CPU: 0 UID: 0 PID: 547 Comm: rtcwake Tainted: G O 6.17.0-rc3-00014-g31419c045d64 #6 VOLUNTARY Tainted: [O]=OOT_MODULE Stack: 223721b3a80 6089eac6 00000001 00000001 ffffff00 6089eac6 00000535 6086e528 721b3ac0 6003c294 00000000 60031fc0 Call Trace: [<600407ed>] show_stack+0x10e/0x127 [<6003c294>] dump_stack_lvl+0x77/0xc6 [<6003c2fd>] dump_stack+0x1a/0x20 [<600bc2f8>] lockdep_rcu_suspicious+0x116/0x13e [<603d8ea1>] dpm_async_suspend_superior+0x117/0x17e [<603d980f>] device_suspend+0x528/0x541 [<603da24b>] dpm_suspend+0x1a2/0x267 [<603da837>] dpm_suspend_start+0x5d/0x72 [<600ca0c9>] suspend_devices_and_enter+0xab/0x736 [...] Add the fourth argument to the iteration to annotate this and avoid the splat. Fixes: 0679963 ("PM: sleep: Make async suspend handle suppliers like parents") Fixes: ed18738 ("PM: sleep: Make async resume handle consumers like children") Signed-off-by: Johannes Berg <[email protected]> Link: https://patch.msgid.link/20250826134348.aba79f6e6299.I9ecf55da46ccf33778f2c018a82e1819d815b348@changeid Signed-off-by: Rafael J. Wysocki <[email protected]>

If preparing a write bio fails then blk_zone_wplug_bio_work() calls bio_endio() with zwplug->lock held. If a device mapper driver is stacked on top of the zoned block device then this results in nested locking of zwplug->lock. The resulting lockdep complaint is a false positive because this is nested locking and not recursive locking. Suppress this false positive by calling blk_zone_wplug_bio_io_error() without holding zwplug->lock. This is safe because no code in blk_zone_wplug_bio_io_error() depends on zwplug->lock being held. This patch suppresses the following lockdep complaint: WARNING: possible recursive locking detected -------------------------------------------- kworker/3:0H/46 is trying to acquire lock: ffffff882968b830 (&zwplug->lock){-...}-{2:2}, at: blk_zone_write_plug_bio_endio+0x64/0x1f0 but task is already holding lock: ffffff88315bc230 (&zwplug->lock){-...}-{2:2}, at: blk_zone_wplug_bio_work+0x8c/0x48c other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&zwplug->lock); lock(&zwplug->lock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/3:0H/46: #0: ffffff8809486758 ((wq_completion)sdd_zwplugs){+.+.}-{0:0}, at: process_one_work+0x1bc/0x65c #1: ffffffc085de3d70 ((work_completion)(&zwplug->bio_work)){+.+.}-{0:0}, at: process_one_work+0x1e4/0x65c #2: ffffff88315bc230 (&zwplug->lock){-...}-{2:2}, at: blk_zone_wplug_bio_work+0x8c/0x48c stack backtrace: CPU: 3 UID: 0 PID: 46 Comm: kworker/3:0H Tainted: G W OE 6.12.38-android16-5-maybe-dirty-4k #1 8b362b6f76e3645a58cd27d86982bce10d150025 Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Spacecraft board based on MALIBU (DT) Workqueue: sdd_zwplugs blk_zone_wplug_bio_work Call trace: dump_backtrace+0xfc/0x17c show_stack+0x18/0x28 dump_stack_lvl+0x40/0xa0 dump_stack+0x18/0x24 print_deadlock_bug+0x38c/0x398 __lock_acquire+0x13e8/0x2e1c lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 blk_zone_write_plug_bio_endio+0x64/0x1f0 bio_endio+0x9c/0x240 __dm_io_complete+0x214/0x260 clone_endio+0xe8/0x214 bio_endio+0x218/0x240 blk_zone_wplug_bio_work+0x204/0x48c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 Cc: [email protected] Cc: Damien Le Moal <[email protected]> Cc: Christoph Hellwig <[email protected]> Fixes: dd291d7 ("block: Introduce zone write plugging") Signed-off-by: Bart Van Assche <[email protected]> Reviewed-by: Damien Le Moal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>

…ux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 changes for 6.17, take #2 - Correctly handle 'invariant' system registers for protected VMs - Improved handling of VNCR data aborts, including external aborts - Fixes for handling of FEAT_RAS for NV guests, providing a sane fault context during SEA injection and preventing the use of RASv1p1 fault injection hardware - Ensure that page table destruction when a VM is destroyed gives an opportunity to reschedule - Large fix to KVM's infrastructure for managing guest context loaded on the CPU, addressing issues where the output of AT emulation doesn't get reflected to the guest - Fix AT S12 emulation to actually perform stage-2 translation when necessary - Avoid attempting vLPI irqbypass when GICv4 has been explicitly disabled for a VM - Minor KVM + selftest fixes

In gicv5_irs_of_init_affinity() a WARN_ON() is triggered if: 1) a phandle in the "cpus" property does not correspond to a valid OF node 2 a CPU logical id does not exist for a given OF cpu_node #1 is a firmware bug and should be reported as such but does not warrant a WARN_ON() backtrace. #2 is not necessarily an error condition (eg a kernel can be booted with nr_cpus=X limiting the number of cores artificially) and therefore there is no reason to clutter the kernel log with WARN_ON() output when the condition is hit. Rework the IRS affinity parsing code to remove undue WARN_ON()s thus making it less noisy. Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/all/[email protected]

…on 3C6000 series steppings Older steppings of the Loongson 3C6000 series incorrectly report the supported link speeds on their PCIe bridges (device IDs 3c19, 3c29) as only 2.5 GT/s, despite the upstream bus supporting speeds from 2.5 GT/s up to 16 GT/s. As a result, certain PCIe devices would be incorrectly probed as a Gen1- only, even if higher link speeds are supported, harming performance and prevents dynamic link speed functionality from being enabled in drivers such as amdgpu. Manually override the `supported_speeds` field for affected PCIe bridges with those found on the upstream bus to correctly reflect the supported link speeds. This patch is found from AOSC OS[1]. Link: #2 #1 Tested-by: Lain Fearyncess Yang <[email protected]> Tested-by: Mingcong Bai <[email protected]> Tested-by: Ayden Meng <[email protected]> Signed-off-by: Ayden Meng <[email protected]> Signed-off-by: Ziyao <[email protected]> Link: https://lore.kernel.org/loongarch/[email protected]/ Signed-off-by: Mingcong Bai <[email protected]>

When the "proxy" option is enabled on a VXLAN device, the device will suppress ARP requests and IPv6 Neighbor Solicitation messages if it is able to reply on behalf of the remote host. That is, if a matching and valid neighbor entry is configured on the VXLAN device whose MAC address is not behind the "any" remote (0.0.0.0 / ::). The code currently assumes that the FDB entry for the neighbor's MAC address points to a valid remote destination, but this is incorrect if the entry is associated with an FDB nexthop group. This can result in a NPD [1][3] which can be reproduced using [2][4]. Fix by checking that the remote destination exists before dereferencing it. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 4 UID: 0 PID: 365 Comm: arping Not tainted 6.17.0-rc2-virtme-g2a89cb21162c #2 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014 RIP: 0010:vxlan_xmit+0xb58/0x15f0 [...] Call Trace: <TASK> dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 packet_sendmsg+0x113a/0x1850 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] #!/bin/bash ip address add 192.0.2.1/32 dev lo ip nexthop add id 1 via 192.0.2.2 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 4789 proxy ip neigh add 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 arping -b -c 1 -s 192.0.2.1 -I vx0 192.0.2.3 [3] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 13 UID: 0 PID: 372 Comm: ndisc6 Not tainted 6.17.0-rc2-virtmne-g6ee90cb26014 #3 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1v996), BIOS 1.17.0-4.fc41 04/01/2x014 RIP: 0010:vxlan_xmit+0x803/0x1600 [...] Call Trace: <TASK> dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 ip6_finish_output2+0x210/0x6c0 ip6_finish_output+0x1af/0x2b0 ip6_mr_output+0x92/0x3e0 ip6_send_skb+0x30/0x90 rawv6_sendmsg+0xe6e/0x12e0 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f383422ec77 [4] #!/bin/bash ip address add 2001:db8:1::1/128 dev lo ip nexthop add id 1 via 2001:db8:1::1 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 2001:db8:1::1 dstport 4789 proxy ip neigh add 2001:db8:1::3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 ndisc6 -r 1 -s 2001:db8:1::1 -w 1 2001:db8:1::3 vx0 Fixes: 1274e1c ("vxlan: ecmp support for mac fdb entries") Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Nikolay Aleksandrov <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Ido Schimmel says: ==================== vxlan: Fix NPDs when using nexthop objects With FDB nexthop groups, VXLAN FDB entries do not necessarily point to a remote destination but rather to an FDB nexthop group. This means that first_remote_{rcu,rtnl}() can return NULL and a few places in the driver were not ready for that, resulting in NULL pointer dereferences. Patches #1-#2 fix these NPDs. Note that vxlan_fdb_find_uc() still dereferences the remote returned by first_remote_rcu() without checking that it is not NULL, but this function is only invoked by a single driver which vetoes the creation of FDB nexthop groups. I will patch this in net-next to make the code less fragile. Patch #3 adds a selftests which exercises these code paths and tests basic Tx functionality with FDB nexthop groups. I verified that the test crashes the kernel without the first two patches. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

When transmitting a PTP frame which is timestamp using 2 step, the following warning appears if CONFIG_PROVE_LOCKING is enabled: ============================= [ BUG: Invalid wait context ] 6.17.0-rc1-00326-ge6160462704e torvalds#427 Not tainted ----------------------------- ptp4l/119 is trying to lock: c2a44ed4 (&vsc8531->ts_lock){+.+.}-{3:3}, at: vsc85xx_txtstamp+0x50/0xac other info that might help us debug this: context-{4:4} 4 locks held by ptp4l/119: #0: c145f068 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x58/0x1440 #1: c29df974 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x5c4/0x1440 #2: c2aaaad0 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x108/0x350 #3: c2aac170 (&lan966x->tx_lock){+.-.}-{2:2}, at: lan966x_port_xmit+0xd0/0x350 stack backtrace: CPU: 0 UID: 0 PID: 119 Comm: ptp4l Not tainted 6.17.0-rc1-00326-ge6160462704e torvalds#427 NONE Hardware name: Generic DT based system Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x7c/0xac dump_stack_lvl from __lock_acquire+0x8e8/0x29dc __lock_acquire from lock_acquire+0x108/0x38c lock_acquire from __mutex_lock+0xb0/0xe78 __mutex_lock from mutex_lock_nested+0x1c/0x24 mutex_lock_nested from vsc85xx_txtstamp+0x50/0xac vsc85xx_txtstamp from lan966x_fdma_xmit+0xd8/0x3a8 lan966x_fdma_xmit from lan966x_port_xmit+0x1bc/0x350 lan966x_port_xmit from dev_hard_start_xmit+0xc8/0x2c0 dev_hard_start_xmit from sch_direct_xmit+0x8c/0x350 sch_direct_xmit from __dev_queue_xmit+0x680/0x1440 __dev_queue_xmit from packet_sendmsg+0xfa4/0x1568 packet_sendmsg from __sys_sendto+0x110/0x19c __sys_sendto from sys_send+0x18/0x20 sys_send from ret_fast_syscall+0x0/0x1c Exception stack(0xf0b05fa8 to 0xf0b05ff0) 5fa0: 00000001 0000000 0000000 0004b47a 0000003a 00000000 5fc0: 00000001 0000000 00000000 00000121 0004af58 00044874 00000000 00000000 5fe0: 00000001 bee9d420 00025a10 b6e75c7c So, instead of using the ts_lock for tx_queue, use the spinlock that skb_buff_head has. Reviewed-by: Vadim Fedorenko <[email protected]> Fixes: 7d272e6 ("net: phy: mscc: timestamping and PHC support") Signed-off-by: Horatiu Vultur <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

The commit ced17ee ("Revert "virtio: reject shm region if length is zero"") exposes the following DAX page fault bug (this fix the failure that getting shm region alway returns false because of zero length): The commit 21aa65b ("mm: remove callers of pfn_t functionality") handles the DAX physical page address incorrectly: the removed macro 'phys_to_pfn_t()' should be replaced with 'PHYS_PFN()'. [ 1.390321] BUG: unable to handle page fault for address: ffffd3fb40000008 [ 1.390875] #PF: supervisor read access in kernel mode [ 1.391257] #PF: error_code(0x0000) - not-present page [ 1.391509] PGD 0 P4D 0 [ 1.391626] Oops: Oops: 0000 [#1] SMP NOPTI [ 1.391806] CPU: 6 UID: 1000 PID: 162 Comm: weston Not tainted 6.17.0-rc3-WSL2-STABLE #2 PREEMPT(none) [ 1.392361] RIP: 0010:dax_to_folio+0x14/0x60 [ 1.392653] Code: 52 c9 c3 00 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 c1 ef 05 48 c1 e7 06 48 03 3d 34 b5 31 01 <48> 8b 57 08 48 89 f8 f6 c2 01 75 2b 66 90 c3 cc cc cc cc f7 c7 ff [ 1.393727] RSP: 0000:ffffaf7d04407aa8 EFLAGS: 00010086 [ 1.394003] RAX: 000000a000000000 RBX: ffffaf7d04407bb0 RCX: 0000000000000000 [ 1.394524] RDX: ffffd17b40000008 RSI: 0000000000000083 RDI: ffffd3fb40000000 [ 1.394967] RBP: 0000000000000011 R08: 000000a000000000 R09: 0000000000000000 [ 1.395400] R10: 0000000000001000 R11: ffffaf7d04407c10 R12: 0000000000000000 [ 1.395806] R13: ffffa020557be9c0 R14: 0000014000000001 R15: 0000725970e94000 [ 1.396268] FS: 000072596d6d2ec0(0000) GS:ffffa0222dc59000(0000) knlGS:0000000000000000 [ 1.396715] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.397100] CR2: ffffd3fb40000008 CR3: 000000011579c005 CR4: 0000000000372ef0 [ 1.397518] Call Trace: [ 1.397663] <TASK> [ 1.397900] dax_insert_entry+0x13b/0x390 [ 1.398179] dax_fault_iter+0x2a5/0x6c0 [ 1.398443] dax_iomap_pte_fault+0x193/0x3c0 [ 1.398750] __fuse_dax_fault+0x8b/0x270 [ 1.398997] ? vm_mmap_pgoff+0x161/0x210 [ 1.399175] __do_fault+0x30/0x180 [ 1.399360] do_fault+0xc4/0x550 [ 1.399547] __handle_mm_fault+0x8e3/0xf50 [ 1.399731] ? do_syscall_64+0x72/0x1e0 [ 1.399958] handle_mm_fault+0x192/0x2f0 [ 1.400204] do_user_addr_fault+0x20e/0x700 [ 1.400418] exc_page_fault+0x66/0x150 [ 1.400602] asm_exc_page_fault+0x26/0x30 [ 1.400831] RIP: 0033:0x72596d1bf703 [ 1.401076] Code: 31 f6 45 31 e4 48 8d 15 b3 73 00 00 e8 06 03 00 00 8b 83 68 01 00 00 e9 8e fa ff ff 0f 1f 00 48 8b 44 24 08 4c 89 ee 48 89 df <c7> 00 21 43 34 12 e8 72 09 00 00 e9 6a fa ff ff 0f 1f 44 00 00 e8 [ 1.402172] RSP: 002b:00007ffc350f6dc0 EFLAGS: 00010202 [ 1.402488] RAX: 0000725970e94000 RBX: 00005b7c642c2560 RCX: 0000725970d359a7 [ 1.402898] RDX: 0000000000000003 RSI: 00007ffc350f6dc0 RDI: 00005b7c642c2560 [ 1.403284] RBP: 00007ffc350f6e90 R08: 000000000000000d R09: 0000000000000000 [ 1.403634] R10: 00007ffc350f6dd8 R11: 0000000000000246 R12: 0000000000000001 [ 1.404078] R13: 00007ffc350f6dc0 R14: 0000725970e29ce0 R15: 0000000000000003 [ 1.404450] </TASK> [ 1.404570] Modules linked in: [ 1.404821] CR2: ffffd3fb40000008 [ 1.405029] ---[ end trace 0000000000000000 ]--- [ 1.405323] RIP: 0010:dax_to_folio+0x14/0x60 [ 1.405556] Code: 52 c9 c3 00 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 c1 ef 05 48 c1 e7 06 48 03 3d 34 b5 31 01 <48> 8b 57 08 48 89 f8 f6 c2 01 75 2b 66 90 c3 cc cc cc cc f7 c7 ff [ 1.406639] RSP: 0000:ffffaf7d04407aa8 EFLAGS: 00010086 [ 1.406910] RAX: 000000a000000000 RBX: ffffaf7d04407bb0 RCX: 0000000000000000 [ 1.407379] RDX: ffffd17b40000008 RSI: 0000000000000083 RDI: ffffd3fb40000000 [ 1.407800] RBP: 0000000000000011 R08: 000000a000000000 R09: 0000000000000000 [ 1.408246] R10: 0000000000001000 R11: ffffaf7d04407c10 R12: 0000000000000000 [ 1.408666] R13: ffffa020557be9c0 R14: 0000014000000001 R15: 0000725970e94000 [ 1.409170] FS: 000072596d6d2ec0(0000) GS:ffffa0222dc59000(0000) knlGS:0000000000000000 [ 1.409608] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.409977] CR2: ffffd3fb40000008 CR3: 000000011579c005 CR4: 0000000000372ef0 [ 1.410437] Kernel panic - not syncing: Fatal exception [ 1.410857] Kernel Offset: 0xc000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Fixes: 21aa65b ("mm: remove callers of pfn_t functionality") Signed-off-by: Haiyue Wang <[email protected]> Link: https://lore.kernel.org/[email protected] Acked-by: David Hildenbrand <[email protected]> Reviewed-by: Miklos Szeredi <[email protected]> Signed-off-by: Christian Brauner <[email protected]>

[ Upstream commit 9776651 ] With CONFIG_DEBUG_OBJECTS_TIMERS unloading hfcpci module leads to the following splat: [ 250.215892] ODEBUG: assert_init not available (active state 0) object: ffffffffc01a3dc0 object type: timer_list hint: 0x0 [ 250.217520] WARNING: CPU: 0 PID: 233 at lib/debugobjects.c:612 debug_print_object+0x1b6/0x2c0 [ 250.218775] Modules linked in: hfcpci(-) mISDN_core [ 250.219537] CPU: 0 UID: 0 PID: 233 Comm: rmmod Not tainted 6.17.0-rc2-g6f713187ac98 #2 PREEMPT(voluntary) [ 250.220940] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 250.222377] RIP: 0010:debug_print_object+0x1b6/0x2c0 [ 250.223131] Code: fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 75 4f 41 56 48 8b 14 dd a0 4e 01 9f 48 89 ee 48 c7 c7 20 46 01 9f e8 cb 84d [ 250.225805] RSP: 0018:ffff888015ea7c08 EFLAGS: 00010286 [ 250.226608] RAX: 0000000000000000 RBX: 0000000000000005 RCX: ffffffff9be93a95 [ 250.227708] RDX: 1ffff1100d945138 RSI: 0000000000000008 RDI: ffff88806ca289c0 [ 250.228993] RBP: ffffffff9f014a00 R08: 0000000000000001 R09: ffffed1002bd4f39 [ 250.230043] R10: ffff888015ea79cf R11: 0000000000000001 R12: 0000000000000001 [ 250.231185] R13: ffffffff9eea0520 R14: 0000000000000000 R15: ffff888015ea7cc8 [ 250.232454] FS: 00007f3208f01540(0000) GS:ffff8880caf5a000(0000) knlGS:0000000000000000 [ 250.233851] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 250.234856] CR2: 00007f32090a7421 CR3: 0000000004d63000 CR4: 00000000000006f0 [ 250.236117] Call Trace: [ 250.236599] <TASK> [ 250.236967] ? trace_irq_enable.constprop.0+0xd4/0x130 [ 250.237920] debug_object_assert_init+0x1f6/0x310 [ 250.238762] ? __pfx_debug_object_assert_init+0x10/0x10 [ 250.239658] ? __lock_acquire+0xdea/0x1c70 [ 250.240369] __try_to_del_timer_sync+0x69/0x140 [ 250.241172] ? __pfx___try_to_del_timer_sync+0x10/0x10 [ 250.242058] ? __timer_delete_sync+0xc6/0x120 [ 250.242842] ? lock_acquire+0x30/0x80 [ 250.243474] ? __timer_delete_sync+0xc6/0x120 [ 250.244262] __timer_delete_sync+0x98/0x120 [ 250.245015] HFC_cleanup+0x10/0x20 [hfcpci] [ 250.245704] __do_sys_delete_module+0x348/0x510 [ 250.246461] ? __pfx___do_sys_delete_module+0x10/0x10 [ 250.247338] do_syscall_64+0xc1/0x360 [ 250.247924] entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by initializing hfc_tl timer with DEFINE_TIMER macro. Also, use mod_timer instead of manual timeout update. Fixes: 87c5fa1 ("mISDN: Add different different timer settings for hfc-pci") Fixes: 175302f ("mISDN: hfcpci: Fix use-after-free bug in hfcpci_softirq") Signed-off-by: Vladimir Riabchun <[email protected]> Link: https://patch.msgid.link/aKiy2D_LiWpQ5kXq@vova-pc Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 198f36f upstream. If preparing a write bio fails then blk_zone_wplug_bio_work() calls bio_endio() with zwplug->lock held. If a device mapper driver is stacked on top of the zoned block device then this results in nested locking of zwplug->lock. The resulting lockdep complaint is a false positive because this is nested locking and not recursive locking. Suppress this false positive by calling blk_zone_wplug_bio_io_error() without holding zwplug->lock. This is safe because no code in blk_zone_wplug_bio_io_error() depends on zwplug->lock being held. This patch suppresses the following lockdep complaint: WARNING: possible recursive locking detected -------------------------------------------- kworker/3:0H/46 is trying to acquire lock: ffffff882968b830 (&zwplug->lock){-...}-{2:2}, at: blk_zone_write_plug_bio_endio+0x64/0x1f0 but task is already holding lock: ffffff88315bc230 (&zwplug->lock){-...}-{2:2}, at: blk_zone_wplug_bio_work+0x8c/0x48c other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&zwplug->lock); lock(&zwplug->lock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/3:0H/46: #0: ffffff8809486758 ((wq_completion)sdd_zwplugs){+.+.}-{0:0}, at: process_one_work+0x1bc/0x65c #1: ffffffc085de3d70 ((work_completion)(&zwplug->bio_work)){+.+.}-{0:0}, at: process_one_work+0x1e4/0x65c #2: ffffff88315bc230 (&zwplug->lock){-...}-{2:2}, at: blk_zone_wplug_bio_work+0x8c/0x48c stack backtrace: CPU: 3 UID: 0 PID: 46 Comm: kworker/3:0H Tainted: G W OE 6.12.38-android16-5-maybe-dirty-4k #1 8b362b6f76e3645a58cd27d86982bce10d150025 Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Spacecraft board based on MALIBU (DT) Workqueue: sdd_zwplugs blk_zone_wplug_bio_work Call trace: dump_backtrace+0xfc/0x17c show_stack+0x18/0x28 dump_stack_lvl+0x40/0xa0 dump_stack+0x18/0x24 print_deadlock_bug+0x38c/0x398 __lock_acquire+0x13e8/0x2e1c lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 blk_zone_write_plug_bio_endio+0x64/0x1f0 bio_endio+0x9c/0x240 __dm_io_complete+0x214/0x260 clone_endio+0xe8/0x214 bio_endio+0x218/0x240 blk_zone_wplug_bio_work+0x204/0x48c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 Cc: [email protected] Cc: Damien Le Moal <[email protected]> Cc: Christoph Hellwig <[email protected]> Fixes: dd291d7 ("block: Introduce zone write plugging") Signed-off-by: Bart Van Assche <[email protected]> Reviewed-by: Damien Le Moal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 1f5d2fd ] When the "proxy" option is enabled on a VXLAN device, the device will suppress ARP requests and IPv6 Neighbor Solicitation messages if it is able to reply on behalf of the remote host. That is, if a matching and valid neighbor entry is configured on the VXLAN device whose MAC address is not behind the "any" remote (0.0.0.0 / ::). The code currently assumes that the FDB entry for the neighbor's MAC address points to a valid remote destination, but this is incorrect if the entry is associated with an FDB nexthop group. This can result in a NPD [1][3] which can be reproduced using [2][4]. Fix by checking that the remote destination exists before dereferencing it. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 4 UID: 0 PID: 365 Comm: arping Not tainted 6.17.0-rc2-virtme-g2a89cb21162c #2 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014 RIP: 0010:vxlan_xmit+0xb58/0x15f0 [...] Call Trace: <TASK> dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 packet_sendmsg+0x113a/0x1850 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] #!/bin/bash ip address add 192.0.2.1/32 dev lo ip nexthop add id 1 via 192.0.2.2 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 4789 proxy ip neigh add 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 arping -b -c 1 -s 192.0.2.1 -I vx0 192.0.2.3 [3] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 13 UID: 0 PID: 372 Comm: ndisc6 Not tainted 6.17.0-rc2-virtmne-g6ee90cb26014 #3 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1v996), BIOS 1.17.0-4.fc41 04/01/2x014 RIP: 0010:vxlan_xmit+0x803/0x1600 [...] Call Trace: <TASK> dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 ip6_finish_output2+0x210/0x6c0 ip6_finish_output+0x1af/0x2b0 ip6_mr_output+0x92/0x3e0 ip6_send_skb+0x30/0x90 rawv6_sendmsg+0xe6e/0x12e0 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f383422ec77 [4] #!/bin/bash ip address add 2001:db8:1::1/128 dev lo ip nexthop add id 1 via 2001:db8:1::1 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 2001:db8:1::1 dstport 4789 proxy ip neigh add 2001:db8:1::3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 ndisc6 -r 1 -s 2001:db8:1::1 -w 1 2001:db8:1::3 vx0 Fixes: 1274e1c ("vxlan: ecmp support for mac fdb entries") Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Nikolay Aleksandrov <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 9b2bfdb ] When transmitting a PTP frame which is timestamp using 2 step, the following warning appears if CONFIG_PROVE_LOCKING is enabled: ============================= [ BUG: Invalid wait context ] 6.17.0-rc1-00326-ge6160462704e torvalds#427 Not tainted ----------------------------- ptp4l/119 is trying to lock: c2a44ed4 (&vsc8531->ts_lock){+.+.}-{3:3}, at: vsc85xx_txtstamp+0x50/0xac other info that might help us debug this: context-{4:4} 4 locks held by ptp4l/119: #0: c145f068 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x58/0x1440 #1: c29df974 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x5c4/0x1440 #2: c2aaaad0 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x108/0x350 #3: c2aac170 (&lan966x->tx_lock){+.-.}-{2:2}, at: lan966x_port_xmit+0xd0/0x350 stack backtrace: CPU: 0 UID: 0 PID: 119 Comm: ptp4l Not tainted 6.17.0-rc1-00326-ge6160462704e torvalds#427 NONE Hardware name: Generic DT based system Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x7c/0xac dump_stack_lvl from __lock_acquire+0x8e8/0x29dc __lock_acquire from lock_acquire+0x108/0x38c lock_acquire from __mutex_lock+0xb0/0xe78 __mutex_lock from mutex_lock_nested+0x1c/0x24 mutex_lock_nested from vsc85xx_txtstamp+0x50/0xac vsc85xx_txtstamp from lan966x_fdma_xmit+0xd8/0x3a8 lan966x_fdma_xmit from lan966x_port_xmit+0x1bc/0x350 lan966x_port_xmit from dev_hard_start_xmit+0xc8/0x2c0 dev_hard_start_xmit from sch_direct_xmit+0x8c/0x350 sch_direct_xmit from __dev_queue_xmit+0x680/0x1440 __dev_queue_xmit from packet_sendmsg+0xfa4/0x1568 packet_sendmsg from __sys_sendto+0x110/0x19c __sys_sendto from sys_send+0x18/0x20 sys_send from ret_fast_syscall+0x0/0x1c Exception stack(0xf0b05fa8 to 0xf0b05ff0) 5fa0: 00000001 0000000 0000000 0004b47a 0000003a 00000000 5fc0: 00000001 0000000 00000000 00000121 0004af58 00044874 00000000 00000000 5fe0: 00000001 bee9d420 00025a10 b6e75c7c So, instead of using the ts_lock for tx_queue, use the spinlock that skb_buff_head has. Reviewed-by: Vadim Fedorenko <[email protected]> Fixes: 7d272e6 ("net: phy: mscc: timestamping and PHC support") Signed-off-by: Horatiu Vultur <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…on 3C6000 series steppings Older steppings of the Loongson 3C6000 series incorrectly report the supported link speeds on their PCIe bridges (device IDs 3c19, 3c29) as only 2.5 GT/s, despite the upstream bus supporting speeds from 2.5 GT/s up to 16 GT/s. As a result, certain PCIe devices would be incorrectly probed as a Gen1- only, even if higher link speeds are supported, harming performance and prevents dynamic link speed functionality from being enabled in drivers such as amdgpu. Manually override the `supported_speeds` field for affected PCIe bridges with those found on the upstream bus to correctly reflect the supported link speeds. This patch is found from AOSC OS[1]. Link: #2 #1 Tested-by: Lain Fearyncess Yang <[email protected]> Tested-by: Mingcong Bai <[email protected]> Tested-by: Ayden Meng <[email protected]> Signed-off-by: Ayden Meng <[email protected]> Signed-off-by: Ziyao <[email protected]> Link: https://lore.kernel.org/loongarch/[email protected]/ Signed-off-by: Mingcong Bai <[email protected]>

[ Upstream commit 1f5d2fd ] When the "proxy" option is enabled on a VXLAN device, the device will suppress ARP requests and IPv6 Neighbor Solicitation messages if it is able to reply on behalf of the remote host. That is, if a matching and valid neighbor entry is configured on the VXLAN device whose MAC address is not behind the "any" remote (0.0.0.0 / ::). The code currently assumes that the FDB entry for the neighbor's MAC address points to a valid remote destination, but this is incorrect if the entry is associated with an FDB nexthop group. This can result in a NPD [1][3] which can be reproduced using [2][4]. Fix by checking that the remote destination exists before dereferencing it. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 4 UID: 0 PID: 365 Comm: arping Not tainted 6.17.0-rc2-virtme-g2a89cb21162c #2 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014 RIP: 0010:vxlan_xmit+0xb58/0x15f0 [...] Call Trace: <TASK> dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 packet_sendmsg+0x113a/0x1850 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] #!/bin/bash ip address add 192.0.2.1/32 dev lo ip nexthop add id 1 via 192.0.2.2 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 4789 proxy ip neigh add 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 arping -b -c 1 -s 192.0.2.1 -I vx0 192.0.2.3 [3] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 13 UID: 0 PID: 372 Comm: ndisc6 Not tainted 6.17.0-rc2-virtmne-g6ee90cb26014 #3 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1v996), BIOS 1.17.0-4.fc41 04/01/2x014 RIP: 0010:vxlan_xmit+0x803/0x1600 [...] Call Trace: <TASK> dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 ip6_finish_output2+0x210/0x6c0 ip6_finish_output+0x1af/0x2b0 ip6_mr_output+0x92/0x3e0 ip6_send_skb+0x30/0x90 rawv6_sendmsg+0xe6e/0x12e0 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f383422ec77 [4] #!/bin/bash ip address add 2001:db8:1::1/128 dev lo ip nexthop add id 1 via 2001:db8:1::1 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 2001:db8:1::1 dstport 4789 proxy ip neigh add 2001:db8:1::3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 ndisc6 -r 1 -s 2001:db8:1::1 -w 1 2001:db8:1::3 vx0 Fixes: 1274e1c ("vxlan: ecmp support for mac fdb entries") Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Nikolay Aleksandrov <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 9b2bfdb ] When transmitting a PTP frame which is timestamp using 2 step, the following warning appears if CONFIG_PROVE_LOCKING is enabled: ============================= [ BUG: Invalid wait context ] 6.17.0-rc1-00326-ge6160462704e torvalds#427 Not tainted ----------------------------- ptp4l/119 is trying to lock: c2a44ed4 (&vsc8531->ts_lock){+.+.}-{3:3}, at: vsc85xx_txtstamp+0x50/0xac other info that might help us debug this: context-{4:4} 4 locks held by ptp4l/119: #0: c145f068 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x58/0x1440 #1: c29df974 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x5c4/0x1440 #2: c2aaaad0 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x108/0x350 #3: c2aac170 (&lan966x->tx_lock){+.-.}-{2:2}, at: lan966x_port_xmit+0xd0/0x350 stack backtrace: CPU: 0 UID: 0 PID: 119 Comm: ptp4l Not tainted 6.17.0-rc1-00326-ge6160462704e torvalds#427 NONE Hardware name: Generic DT based system Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x7c/0xac dump_stack_lvl from __lock_acquire+0x8e8/0x29dc __lock_acquire from lock_acquire+0x108/0x38c lock_acquire from __mutex_lock+0xb0/0xe78 __mutex_lock from mutex_lock_nested+0x1c/0x24 mutex_lock_nested from vsc85xx_txtstamp+0x50/0xac vsc85xx_txtstamp from lan966x_fdma_xmit+0xd8/0x3a8 lan966x_fdma_xmit from lan966x_port_xmit+0x1bc/0x350 lan966x_port_xmit from dev_hard_start_xmit+0xc8/0x2c0 dev_hard_start_xmit from sch_direct_xmit+0x8c/0x350 sch_direct_xmit from __dev_queue_xmit+0x680/0x1440 __dev_queue_xmit from packet_sendmsg+0xfa4/0x1568 packet_sendmsg from __sys_sendto+0x110/0x19c __sys_sendto from sys_send+0x18/0x20 sys_send from ret_fast_syscall+0x0/0x1c Exception stack(0xf0b05fa8 to 0xf0b05ff0) 5fa0: 00000001 0000000 0000000 0004b47a 0000003a 00000000 5fc0: 00000001 0000000 00000000 00000121 0004af58 00044874 00000000 00000000 5fe0: 00000001 bee9d420 00025a10 b6e75c7c So, instead of using the ts_lock for tx_queue, use the spinlock that skb_buff_head has. Reviewed-by: Vadim Fedorenko <[email protected]> Fixes: 7d272e6 ("net: phy: mscc: timestamping and PHC support") Signed-off-by: Horatiu Vultur <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…on 3C6000 series steppings Older steppings of the Loongson 3C6000 series incorrectly report the supported link speeds on their PCIe bridges (device IDs 3c19, 3c29) as only 2.5 GT/s, despite the upstream bus supporting speeds from 2.5 GT/s up to 16 GT/s. As a result, certain PCIe devices would be incorrectly probed as a Gen1- only, even if higher link speeds are supported, harming performance and prevents dynamic link speed functionality from being enabled in drivers such as amdgpu. Manually override the `supported_speeds` field for affected PCIe bridges with those found on the upstream bus to correctly reflect the supported link speeds. This patch is found from AOSC OS[1]. Link: #2 #1 Tested-by: Lain Fearyncess Yang <[email protected]> Tested-by: Mingcong Bai <[email protected]> Tested-by: Ayden Meng <[email protected]> Signed-off-by: Ayden Meng <[email protected]> Signed-off-by: Ziyao <[email protected]> Link: https://lore.kernel.org/loongarch/[email protected]/ Signed-off-by: Mingcong Bai <[email protected]>

Problem description =================== Lockdep reports a possible circular locking dependency (AB/BA) between &pl->state_mutex and &phy->lock, as follows. phylink_resolve() // acquires &pl->state_mutex -> phylink_major_config() -> phy_config_inband() // acquires &pl->phydev->lock whereas all the other call sites where &pl->state_mutex and &pl->phydev->lock have the locking scheme reversed. Everywhere else, &pl->phydev->lock is acquired at the top level, and &pl->state_mutex at the lower level. A clear example is phylink_bringup_phy(). The outlier is the newly introduced phy_config_inband() and the existing lock order is the correct one. To understand why it cannot be the other way around, it is sufficient to consider phylink_phy_change(), phylink's callback from the PHY device's phy->phy_link_change() virtual method, invoked by the PHY state machine. phy_link_up() and phy_link_down(), the (indirect) callers of phylink_phy_change(), are called with &phydev->lock acquired. Then phylink_phy_change() acquires its own &pl->state_mutex, to serialize changes made to its pl->phy_state and pl->link_config. So all other instances of &pl->state_mutex and &phydev->lock must be consistent with this order. Problem impact ============== I think the kernel runs a serious deadlock risk if an existing phylink_resolve() thread, which results in a phy_config_inband() call, is concurrent with a phy_link_up() or phy_link_down() call, which will deadlock on &pl->state_mutex in phylink_phy_change(). Practically speaking, the impact may be limited by the slow speed of the medium auto-negotiation protocol, which makes it unlikely for the current state to still be unresolved when a new one is detected, but I think the problem is there. Nonetheless, the problem was discovered using lockdep. Proposed solution ================= Practically speaking, the phy_config_inband() requirement of having phydev->lock acquired must transfer to the caller (phylink is the only caller). There, it must bubble up until immediately before &pl->state_mutex is acquired, for the cases where that takes place. Solution details, considerations, notes ======================================= This is the phy_config_inband() call graph: sfp_upstream_ops :: connect_phy() | v phylink_sfp_connect_phy() | v phylink_sfp_config_phy() | | sfp_upstream_ops :: module_insert() | | | v | phylink_sfp_module_insert() | | | | sfp_upstream_ops :: module_start() | | | | | v | | phylink_sfp_module_start() | | | | v v | phylink_sfp_config_optical() phylink_start() | | | phylink_resume() v v | | phylink_sfp_set_config() | | | v v v phylink_mac_initial_config() | phylink_resolve() | | phylink_ethtool_ksettings_set() v v v phylink_major_config() | v phy_config_inband() phylink_major_config() caller #1, phylink_mac_initial_config(), does not acquire &pl->state_mutex nor do its callers. It must acquire &pl->phydev->lock prior to calling phylink_major_config(). phylink_major_config() caller #2, phylink_resolve() acquires &pl->state_mutex, thus also needs to acquire &pl->phydev->lock. phylink_major_config() caller #3, phylink_ethtool_ksettings_set(), is completely uninteresting, because it only calls phylink_major_config() if pl->phydev is NULL (otherwise it calls phy_ethtool_ksettings_set()). We need to change nothing there. Other solutions =============== The lock inversion between &pl->state_mutex and &pl->phydev->lock has occurred at least once before, as seen in commit c718af2 ("net: phylink: fix ethtool -A with attached PHYs"). The solution there was to simply not call phy_set_asym_pause() under the &pl->state_mutex. That cannot be extended to our case though, where the phy_config_inband() call is much deeper inside the &pl->state_mutex section. Fixes: 5fd0f1a ("net: phylink: add negotiation of in-band capabilities") Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Russell King (Oracle) <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

5da3d94 ("PCI: mvebu: Use for_each_of_range() iterator for parsing "ranges"") simplified code by using the for_each_of_range() iterator, but it broke PCI enumeration on Turris Omnia (and probably other mvebu targets). Issue #1: To determine range.flags, of_pci_range_parser_one() uses bus->get_flags(), which resolves to of_bus_pci_get_flags(), which already returns an IORESOURCE bit field, and NOT the original flags from the "ranges" resource. Then mvebu_get_tgt_attr() attempts the very same conversion again. Remove the misinterpretation of range.flags in mvebu_get_tgt_attr(), to restore the intended behavior. Issue #2: The driver needs target and attributes, which are encoded in the raw address values of the "/soc/pcie/ranges" resource. According to of_pci_range_parser_one(), the raw values are stored in range.bus_addr and range.parent_bus_addr, respectively. range.cpu_addr is a translated version of range.parent_bus_addr, and not relevant here. Use the correct range structure member, to extract target and attributes. This restores the intended behavior. Fixes: 5da3d94 ("PCI: mvebu: Use for_each_of_range() iterator for parsing "ranges"") Reported-by: Jan Palus <[email protected]> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220479 Signed-off-by: Klaus Kudielka <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Tested-by: Tony Dinh <[email protected]> Tested-by: Jan Palus <[email protected]> Link: https://patch.msgid.link/[email protected]

…ostcopy When you run a KVM guest with vhost-net and migrate that guest to another host, and you immediately enable postcopy after starting the migration, there is a big chance that the network connection of the guest won't work anymore on the destination side after the migration. With a debug kernel v6.16.0, there is also a call trace that looks like this: FAULT_FLAG_ALLOW_RETRY missing 881 CPU: 6 UID: 0 PID: 549 Comm: kworker/6:2 Kdump: loaded Not tainted 6.16.0 torvalds#56 NONE Hardware name: IBM 3931 LA1 400 (LPAR) Workqueue: events irqfd_inject [kvm] Call Trace: [<00003173cbecc634>] dump_stack_lvl+0x104/0x168 [<00003173cca69588>] handle_userfault+0xde8/0x1310 [<00003173cc756f0c>] handle_pte_fault+0x4fc/0x760 [<00003173cc759212>] __handle_mm_fault+0x452/0xa00 [<00003173cc7599ba>] handle_mm_fault+0x1fa/0x6a0 [<00003173cc73409a>] __get_user_pages+0x4aa/0xba0 [<00003173cc7349e8>] get_user_pages_remote+0x258/0x770 [<000031734be6f052>] get_map_page+0xe2/0x190 [kvm] [<000031734be6f910>] adapter_indicators_set+0x50/0x4a0 [kvm] [<000031734be7f674>] set_adapter_int+0xc4/0x170 [kvm] [<000031734be2f268>] kvm_set_irq+0x228/0x3f0 [kvm] [<000031734be27000>] irqfd_inject+0xd0/0x150 [kvm] [<00003173cc00c9ec>] process_one_work+0x87c/0x1490 [<00003173cc00dda6>] worker_thread+0x7a6/0x1010 [<00003173cc02dc36>] kthread+0x3b6/0x710 [<00003173cbed2f0c>] __ret_from_fork+0xdc/0x7f0 [<00003173cdd737ca>] ret_from_fork+0xa/0x30 3 locks held by kworker/6:2/549: #0: 00000000800bc958 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x7ee/0x1490 #1: 000030f3d527fbd0 ((work_completion)(&irqfd->inject)){+.+.}-{0:0}, at: process_one_work+0x81c/0x1490 #2: 00000000f99862b0 (&mm->mmap_lock){++++}-{3:3}, at: get_map_page+0xa8/0x190 [kvm] The "FAULT_FLAG_ALLOW_RETRY missing" indicates that handle_userfaultfd() saw a page fault request without ALLOW_RETRY flag set, hence userfaultfd cannot remotely resolve it (because the caller was asking for an immediate resolution, aka, FAULT_FLAG_NOWAIT, while remote faults can take time). With that, get_map_page() failed and the irq was lost. We should not be strictly in an atomic environment here and the worker should be sleepable (the call is done during an ioctl from userspace), so we can allow adapter_indicators_set() to just sleep waiting for the remote fault instead. Link: https://issues.redhat.com/browse/RHEL-42486 Signed-off-by: Peter Xu <[email protected]> [thuth: Assembled patch description and fixed some cosmetical issues] Signed-off-by: Thomas Huth <[email protected]> Reviewed-by: Claudio Imbrenda <[email protected]> Acked-by: Janosch Frank <[email protected]> Fixes: f654706 ("KVM: s390/interrupt: do not pin adapter interrupt pages") [frankja: Added fixes tag] Signed-off-by: Janosch Frank <[email protected]>

syzkaller has caught us red-handed once more, this time nesting regular spinlocks behind raw spinlocks: ============================= [ BUG: Invalid wait context ] 6.16.0-rc3-syzkaller-g7b8346bd9fce #0 Not tainted ----------------------------- syz.0.29/3743 is trying to lock: a3ff80008e2e9e18 (&xa->xa_lock#20){....}-{3:3}, at: vgic_put_irq+0xb4/0x190 arch/arm64/kvm/vgic/vgic.c:137 other info that might help us debug this: context-{5:5} 3 locks held by syz.0.29/3743: #0: a3ff80008e2e90a8 (&kvm->slots_lock){+.+.}-{4:4}, at: kvm_vgic_destroy+0x50/0x624 arch/arm64/kvm/vgic/vgic-init.c:499 #1: a3ff80008e2e9fa0 (&kvm->arch.config_lock){+.+.}-{4:4}, at: kvm_vgic_destroy+0x5c/0x624 arch/arm64/kvm/vgic/vgic-init.c:500 #2: 58f0000021be1428 (&vgic_cpu->ap_list_lock){....}-{2:2}, at: vgic_flush_pending_lpis+0x3c/0x31c arch/arm64/kvm/vgic/vgic.c:150 stack backtrace: CPU: 0 UID: 0 PID: 3743 Comm: syz.0.29 Not tainted 6.16.0-rc3-syzkaller-g7b8346bd9fce #0 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:466 (C) __dump_stack+0x30/0x40 lib/dump_stack.c:94 dump_stack_lvl+0xd8/0x12c lib/dump_stack.c:120 dump_stack+0x1c/0x28 lib/dump_stack.c:129 print_lock_invalid_wait_context kernel/locking/lockdep.c:4833 [inline] check_wait_context kernel/locking/lockdep.c:4905 [inline] __lock_acquire+0x978/0x299c kernel/locking/lockdep.c:5190 lock_acquire+0x14c/0x2e0 kernel/locking/lockdep.c:5871 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x5c/0x7c kernel/locking/spinlock.c:162 vgic_put_irq+0xb4/0x190 arch/arm64/kvm/vgic/vgic.c:137 vgic_flush_pending_lpis+0x24c/0x31c arch/arm64/kvm/vgic/vgic.c:158 __kvm_vgic_vcpu_destroy+0x44/0x500 arch/arm64/kvm/vgic/vgic-init.c:455 kvm_vgic_destroy+0x100/0x624 arch/arm64/kvm/vgic/vgic-init.c:505 kvm_arch_destroy_vm+0x80/0x138 arch/arm64/kvm/arm.c:244 kvm_destroy_vm virt/kvm/kvm_main.c:1308 [inline] kvm_put_kvm+0x800/0xff8 virt/kvm/kvm_main.c:1344 kvm_vm_release+0x58/0x78 virt/kvm/kvm_main.c:1367 __fput+0x4ac/0x980 fs/file_table.c:465 ____fput+0x20/0x58 fs/file_table.c:493 task_work_run+0x1bc/0x254 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] do_notify_resume+0x1b4/0x270 arch/arm64/kernel/entry-common.c:151 exit_to_user_mode_prepare arch/arm64/kernel/entry-common.c:169 [inline] exit_to_user_mode arch/arm64/kernel/entry-common.c:178 [inline] el0_svc+0xb4/0x160 arch/arm64/kernel/entry-common.c:768 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 This is of course no good, but is at odds with how LPI refcounts are managed. Solve the locking mess by deferring the release of unreferenced LPIs after the ap_list_lock is released. Mark these to-be-released LPIs specially to avoid racing with vgic_put_irq() and causing a double-free. Since references can only be taken on LPIs with a nonzero refcount, extending the lifetime of freed LPIs is still safe. Reviewed-by: Marc Zyngier <[email protected]> Reported-by: [email protected] Closes: https://lore.kernel.org/kvmarm/[email protected]/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Oliver Upton <[email protected]>

[ Upstream commit e2a10da ] Problem description =================== Lockdep reports a possible circular locking dependency (AB/BA) between &pl->state_mutex and &phy->lock, as follows. phylink_resolve() // acquires &pl->state_mutex -> phylink_major_config() -> phy_config_inband() // acquires &pl->phydev->lock whereas all the other call sites where &pl->state_mutex and &pl->phydev->lock have the locking scheme reversed. Everywhere else, &pl->phydev->lock is acquired at the top level, and &pl->state_mutex at the lower level. A clear example is phylink_bringup_phy(). The outlier is the newly introduced phy_config_inband() and the existing lock order is the correct one. To understand why it cannot be the other way around, it is sufficient to consider phylink_phy_change(), phylink's callback from the PHY device's phy->phy_link_change() virtual method, invoked by the PHY state machine. phy_link_up() and phy_link_down(), the (indirect) callers of phylink_phy_change(), are called with &phydev->lock acquired. Then phylink_phy_change() acquires its own &pl->state_mutex, to serialize changes made to its pl->phy_state and pl->link_config. So all other instances of &pl->state_mutex and &phydev->lock must be consistent with this order. Problem impact ============== I think the kernel runs a serious deadlock risk if an existing phylink_resolve() thread, which results in a phy_config_inband() call, is concurrent with a phy_link_up() or phy_link_down() call, which will deadlock on &pl->state_mutex in phylink_phy_change(). Practically speaking, the impact may be limited by the slow speed of the medium auto-negotiation protocol, which makes it unlikely for the current state to still be unresolved when a new one is detected, but I think the problem is there. Nonetheless, the problem was discovered using lockdep. Proposed solution ================= Practically speaking, the phy_config_inband() requirement of having phydev->lock acquired must transfer to the caller (phylink is the only caller). There, it must bubble up until immediately before &pl->state_mutex is acquired, for the cases where that takes place. Solution details, considerations, notes ======================================= This is the phy_config_inband() call graph: sfp_upstream_ops :: connect_phy() | v phylink_sfp_connect_phy() | v phylink_sfp_config_phy() | | sfp_upstream_ops :: module_insert() | | | v | phylink_sfp_module_insert() | | | | sfp_upstream_ops :: module_start() | | | | | v | | phylink_sfp_module_start() | | | | v v | phylink_sfp_config_optical() phylink_start() | | | phylink_resume() v v | | phylink_sfp_set_config() | | | v v v phylink_mac_initial_config() | phylink_resolve() | | phylink_ethtool_ksettings_set() v v v phylink_major_config() | v phy_config_inband() phylink_major_config() caller #1, phylink_mac_initial_config(), does not acquire &pl->state_mutex nor do its callers. It must acquire &pl->phydev->lock prior to calling phylink_major_config(). phylink_major_config() caller #2, phylink_resolve() acquires &pl->state_mutex, thus also needs to acquire &pl->phydev->lock. phylink_major_config() caller #3, phylink_ethtool_ksettings_set(), is completely uninteresting, because it only calls phylink_major_config() if pl->phydev is NULL (otherwise it calls phy_ethtool_ksettings_set()). We need to change nothing there. Other solutions =============== The lock inversion between &pl->state_mutex and &pl->phydev->lock has occurred at least once before, as seen in commit c718af2 ("net: phylink: fix ethtool -A with attached PHYs"). The solution there was to simply not call phy_set_asym_pause() under the &pl->state_mutex. That cannot be extended to our case though, where the phy_config_inband() call is much deeper inside the &pl->state_mutex section. Fixes: 5fd0f1a ("net: phylink: add negotiation of in-band capabilities") Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Russell King (Oracle) <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit b816265 ] 5da3d94 ("PCI: mvebu: Use for_each_of_range() iterator for parsing "ranges"") simplified code by using the for_each_of_range() iterator, but it broke PCI enumeration on Turris Omnia (and probably other mvebu targets). Issue #1: To determine range.flags, of_pci_range_parser_one() uses bus->get_flags(), which resolves to of_bus_pci_get_flags(), which already returns an IORESOURCE bit field, and NOT the original flags from the "ranges" resource. Then mvebu_get_tgt_attr() attempts the very same conversion again. Remove the misinterpretation of range.flags in mvebu_get_tgt_attr(), to restore the intended behavior. Issue #2: The driver needs target and attributes, which are encoded in the raw address values of the "/soc/pcie/ranges" resource. According to of_pci_range_parser_one(), the raw values are stored in range.bus_addr and range.parent_bus_addr, respectively. range.cpu_addr is a translated version of range.parent_bus_addr, and not relevant here. Use the correct range structure member, to extract target and attributes. This restores the intended behavior. Fixes: 5da3d94 ("PCI: mvebu: Use for_each_of_range() iterator for parsing "ranges"") Reported-by: Jan Palus <[email protected]> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220479 Signed-off-by: Klaus Kudielka <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Tested-by: Tony Dinh <[email protected]> Tested-by: Jan Palus <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>

…on 3C6000 series steppings Older steppings of the Loongson 3C6000 series incorrectly report the supported link speeds on their PCIe bridges (device IDs 3c19, 3c29) as only 2.5 GT/s, despite the upstream bus supporting speeds from 2.5 GT/s up to 16 GT/s. As a result, certain PCIe devices would be incorrectly probed as a Gen1- only, even if higher link speeds are supported, harming performance and prevents dynamic link speed functionality from being enabled in drivers such as amdgpu. Manually override the `supported_speeds` field for affected PCIe bridges with those found on the upstream bus to correctly reflect the supported link speeds. This patch is found from AOSC OS[1]. Link: #2 #1 Tested-by: Lain Fearyncess Yang <[email protected]> Tested-by: Mingcong Bai <[email protected]> Tested-by: Ayden Meng <[email protected]> Signed-off-by: Ayden Meng <[email protected]> Signed-off-by: Ziyao <[email protected]> Link: https://lore.kernel.org/loongarch/[email protected]/ Signed-off-by: Mingcong Bai <[email protected]>

AydenMeng force-pushed the v6.14.10-rc1 branch from eeebfde to 1313c7e Compare June 4, 2025 04:01

AydenMeng changed the title ~~PCI: loongson: Fix supported link speeds for Loongson 3c19/3c29 PCIe~~ PCI: loongson: Fix supported link speeds for Loongson 3c19/3c29 PCIe devices proper dynamic speed negotiation. Jun 4, 2025

AydenMeng force-pushed the v6.14.10-rc1 branch from 1313c7e to 55621c2 Compare June 4, 2025 08:46

MingcongBai approved these changes Jun 4, 2025

View reviewed changes

MingcongBai merged this pull request into AOSC-Tracking:aosc/v6.14.10-rc1 Jun 4, 2025

KexyBiscuit pushed a commit that referenced this pull request Jun 9, 2025

Merge branches 'ti-k3-dts-next' and 'ti-drivers-soc-next' into ti-next

4ca9c20

Batch #2 of next window Signed-off-by: Nishanth Menon <[email protected]>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

PCI: loongson: Fix supported link speeds for Loongson 3c19/3c29 PCIe devices proper dynamic speed negotiation. #2

PCI: loongson: Fix supported link speeds for Loongson 3c19/3c29 PCIe devices proper dynamic speed negotiation. #2

Uh oh!

AydenMeng commented Jun 4, 2025 •

edited

Loading

Uh oh!

Uh oh!

PCI: loongson: Fix supported link speeds for Loongson 3c19/3c29 PCIe devices proper dynamic speed negotiation. #2

PCI: loongson: Fix supported link speeds for Loongson 3c19/3c29 PCIe devices proper dynamic speed negotiation. #2

Uh oh!

Conversation

AydenMeng commented Jun 4, 2025 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Uh oh!

Uh oh!

AydenMeng commented Jun 4, 2025 •

edited

Loading