Update ROG Ally support #15
Closed
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Our default behavior continues to match the vanilla kernel.
The Nvidia proprietary driver has some bugs that leads to issues if used with the simpledrm driver. The most noticeable is that does not register an emulated fbdev device. It just relies on a fbdev to be registered by another driver, that could be that could be attached to the framebuffer console. On UEFI machines, this is the efifb driver. This means that disabling the efifb driver will cause virtual consoles to not be present in the system when using the Nvidia driver. Legacy BIOS is not affected just because fbcon is not used there, but instead vgacon. Unless a VGA mode is specified using the vga= kernel command line option, in that case the vesafb driver is used instead and its fbdev attached to the fbcon. This is a problem because with CONFIG_SYSFB_SIMPLEFB=y, the sysfb platform code attempts to register a "simple-framebuffer" platform device (that is matched against simpledrm) and only registers either an "efi-framebuffer" or "vesa-framebuffer" if this fails to be registered due the video modes not being compatible. The Nvidia driver relying on another driver to register the fbdev is quite fragile, since it can't really assume those will stick around. For example there are patches posted to remove the EFI and VESA platform devices once a real DRM or fbdev driver probes. But in any case, moving to a simpledrm + emulated fbdev only breaks this assumption and causes users to not have VT if the Nvidia driver is used. So to prevent this, let's add a workaround and make the sysfb to skip the "simple-framebuffer" registration when nvidia-drm.modeset=1 option is set. This is quite horrible, but honestly I can't think of any other approach. For this to work, the CONFIG_FB_EFI and CONFIG_FB_VESA config options must be enabled besides CONFIG_DRM_SIMPLEDRM. Signed-off-by: Javier Martinez Canillas <[email protected]> Cherry-picked-for: https://bugs.archlinux.org/task/73720
To mitigate https://zolutal.github.io/aslrnt/; do this with a patch to avoid having to enable `CONFIG_EXPERT`.
Add quirk orientation for AYA NEO 2. The name appears without spaces in dmi strings. That made it difficult to reuse the 2021 match and the display is greater in resolution. Tested by the JELOS team that has been patching their own kernel for a while now and confirmed by users in the AYA NEO and ChimeraOS discord servers. Signed-off-by: Joaquín Ignacio Aramendía <[email protected]>
Add quirk orientation for AYA NEO Founder. The name appears with spaces in dmi strings as other devices of the brand. The panel is the same as the NEXT and 2021 models. Those could not be reused as the former has VENDOR name as "AYANEO" without spaces and the latter has "AYADEVICE". Tested by the JELOS team that has been patching their own kernel for a while now and confirmed by users in the AYA NEO and ChimeraOS discord servers. Signed-off-by: Joaquín Ignacio Aramendía <[email protected]>
Add quirk orientation for AYA NEO GEEK. One of the more recent devices by the brand. The name appears without spaces in dmi strings. The board name is completely different to the previous models making it difficult to reuse their quirks despite being the same resolution and mounting. Tested by the JELOS team that has been patching their own kernel for a while now and confirmed by users in the AYA NEO and ChimeraOS discord servers. Signed-off-by: Joaquín Ignacio Aramendía <[email protected]>
Add quirk orientation for the Ayn Loki Zero. This also has been tested/used by the JELOS team. Signed-off-by: Bouke Sybren Haarsma <[email protected]>
Add quirk orientation for Ayn Loki Max model. This has been tested by JELOS team that uses their own patched kernel for a while now and confirmed by users in the ChimeraOS discord servers. Signed-off-by: Bouke Sybren Haarsma <[email protected]>
We are enabling a large set of color calibration features to enhance KMS color mgmt but these properties are specific of AMD display HW, and cannot be provided by other vendors. Therefore, set a config option to enable AMD driver-private properties used on Steam Deck color mgmt pipeline. Replace the agreed name `AMD_PRIVATE_COLOR` with our downstream version `CONFIG_DRM_AMD_COLOR_STEAMDECK`. Signed-off-by: Melissa Wen <[email protected]>
This patch adds a new sysfs event, which will indicate the userland about a GPU reset, and can also provide some information like: - process ID of the process involved with the GPU reset - process name of the involved process - the GPU status info (using flags) This patch also introduces the first flag of the flags bitmap, which can be appended as and when required. V2: Addressed review comments from Christian and Amar - move the reset information structure to DRM layer - drop _ctx from struct name - make pid 32 bit(than 64) - set flag when VRAM invalid (than valid) - add process name as well (Amar) Cc: Alexandar Deucher <[email protected]> Cc: Christian Koenig <[email protected]> Cc: Amaranath Somalapuram <[email protected]> Signed-off-by: Shashank Sharma <[email protected]> (cherry picked from commit 90230bd) [Forward port to 6.0] Signed-off-by: Cristian Ciocaltea <[email protected]>
This patch adds a work function, which sends a GPU reset uevent and some contextual infomration, like the PID and some status flags. This work should be scheduled during a GPU reset. The userspace can do some recovery and post-processing work based on this event and information. V2: Addressed review comments from Christian - Changed the name of the work to gpu_reset_event_work - Added a structure to accommodate some additional information (like a PID and some flags) - Do not add new structure in amdgpu.h Cc: Alexander Deucher <[email protected]> Cc: Christian Koenig <[email protected]> Cc: Amaranath Somalapuram <[email protected]> Signed-off-by: Shashank Sharma <[email protected]> (cherry picked from commit f63b09e) [Forward port to 6.0] Signed-off-by: Cristian Ciocaltea <[email protected]>
Schedule work function with valid PID, process name, and vram lost status during a GPU reset/ recovery. Signed-off-by: Somalapuram Amaranath <[email protected]> (cherry picked from commit 293c019) [Forward ported to 6.0] Signed-off-by: Cristian Ciocaltea <[email protected]> [Forward ported to 6.9] Signed-off-by: Bouke Sybren Haarsma <[email protected]>
Add OrangePi NEO handheld device. The OrangePi Neo uses different registers for PWM manual mode, set PWM, and read fan speed than previous devices. Valid PWM input and duty cycle is 1-244, we scale this to 1-155 to maintain compatibility with existing userspace tools.
Add OneXPlayer 2 series and OneXFly handhelds. The 2 series uses a new register for turbo button takeover. While at it, adjust formatting of some constants and reorder all cases alphabetically for consistency. Rename some constants for disambiguation.
Add GPD Win Mini. GPD devices don't have a separate enable register, the PWM register is used for this purpose. A write value of 0 puts the PWM into auto mode, writing anything 1-244 puts the PWM into manual mode, and 245-255 are undefined. We scale to 1-255 and handle manual by writing a value to 70% as a common sense default.
Bumps the sensitivity of AMD sfh gyro and accelerometers by removing the division operation and rebasing the units in the hid descriptor. This helps with the gyro deadzone of the Legion Go. Should not affect existing devices.
The ultra-low power BMI260 is an IMU consisting of a 16-bit tri-axial gyroscope and a 16-bit tri-axial accelerometer combining precise acceleration, angular rate measurement and intelligent on-chip motion-triggered interrupt features. The driver supports the BMI260 over I2C. It is based on the BMI160 driver, and like that driver supports accelerometer and gyroscope reading, as well as data ready interrupts.
Contribution by CVMagic (https://github.com/CVMagic) aw87xxx: Use strscpy instead of strlcpy awinic: i2c_driver cleanup and fixes
… also fixed Reset Pin GPIO initialization issue with Ayn Loki Mini
…f specified in ACPI
bmi150-accel and bmi323-imu are declared in an almost identical way in the ACPI and in some devices such as the Asus RC71L the "ROTM" property can be found: parse and use the ACPI-defined mount-matrix. Co-developed-by: Luke D. Jones <[email protected]> Co-developed-by: Jonathan LoBue <[email protected]> Signed-off-by: Denis Benato <[email protected]>
The new ROG Ally X functions the same as the previus model so we can use the same method to ensure the MCU USB devices wake and reconnect correctly. Given that two devices marks the start of a trend, this patch also adds a quirk table to make future additions easier if the MCU is the same. Signed-off-by: Luke D. Jones <[email protected]>
The fw_attributes_class provides a much cleaner interface to all of the attributes introduced to asus-wmi. This patch moves all of these extra attributes over to fw_attributes_class, and shifts the bulk of these definitions to a new kernel module to reduce the clutter of asus-wmi with the intention of deprecating the asus-wmi attributes in future. The work applies only to WMI methods which don't have a clearly defined place within the sysfs and as a result ended up lumped together in /sys/devices/platform/asus-nb-wmi/ with no standard API. Where possible the fw attrs now implement defaults, min, max, scalar, choices, etc. As en example dgpu_disable becomes: /sys/class/firmware-attributes/asus-armoury/attributes/dgpu_disable/ ├── current_value ├── display_name ├── possible_values └── type as do other attributes. Signed-off-by: Luke D. Jones <[email protected]>
Implement the dgpu TGP control under the asus-armoury module using the fw_attributes class. Signed-off-by: Luke D. Jones <[email protected]>
Implement the APU memory size control under the asus-armoury module using the fw_attributes class. This allows the APU allocated memory size to be adjusted depending on the users priority. A reboot is required after change. Signed-off-by: Luke D. Jones <[email protected]>
Implement Intel core enablement under the asus-armoury module using the fw_attributes class. This allows users to enable or disable preformance or efficiency cores depending on their requirements. After change a reboot is required. Signed-off-by: Luke D. Jones <[email protected]>
With the existence of the asus-bioscfg module the attributes no-longer need to live under the /sys/devices/platform/asus-nb-wmi/ path. Deprecate all those that were implemented in asus-bioscfg with the goal of removing them fully in the next LTS cycle. Signed-off-by: Luke D. Jones <[email protected]>
The ASUS ROG Ally X has the same issue as the G14 where it advertises SPS support but doesn't use it. Signed-off-by: Luke D. Jones <[email protected]>
13e20eb to
f8595b4
Compare
This driver adds full support of the ASUS ROG Ally gamepad:
- dinput is translated to XBox controller (Ally-X only)
- default mode has the QAM buttons mapped (Ally-X only)
* left is XBox button
* right is an XBox + A combo for steam QAM
- force feedback is supported (Ally-X only)
- LED brightness control (0-2)
- LED multicolor class support
- Support all configuration
The configuration options available are:
- Gamepad mode (game, wasd, mouse)
- Remapping each button, plus macro map (hold a macro button and press other)
- Joystrick and trigger deadzones
- Gamepad vibration intensity
- Leds (using multicolor class)
- Button turbo abilities (per button)
- Joystick repsonse curves
- Joystick anti-deadzones
The attribute path tree looks like this:
- `./sys/../<USB HID>/`
- `joystick_left/
- `deadzone`
- `mapping` (mouse, wasd, custom)
- `anti_deadzone`
- `response_curve`
- `calibration`
- `calibration_reset`
- `trigger_left/
- `deadzone`
- `response_curve`
- `calibration`
- `calibration_reset`
- `gamepad_mode`
- `button_mapping`
- `A`
- `B`
- `dpad_left`
- etc
No settings are applied until `apply_all` is written to. The exception is
for calibrations.
While there is calibration ability, it can be difficult to get correct
and is heavily device dependent, as such it is set when written and not
when `apply_all` is written to. On driver load the set calibrations are
retrieved - this may be what you've set in Linux, Windows, or factory
defaults.
Signed-off-by: Luke D. Jones <[email protected]>
f8595b4 to
4558a02
Compare
|
I don't know what commit these conflicts are coming from. Possibly I dropped a series instead of revert? In either case if main branch drops any that match what I've submitted here it should fix itself up. |
e41dbad to
c4bd15e
Compare
|
Latest patch added to v6.9.12-chos7. Should be in v46-2 when it comes out. |
flukejones
pushed a commit
to flukejones/linux
that referenced
this pull request
Aug 31, 2024
A sysfs reader can race with a device reset or removal, attempting to
read device state when the device is not actually present. eg:
[exception RIP: qed_get_current_link+17]
ChimeraOS#8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede]
ChimeraOS#9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3
ChimeraOS#10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4
ChimeraOS#11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300
ChimeraOS#12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c
ChimeraOS#13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b
ChimeraOS#14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3
ChimeraOS#15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1
ChimeraOS#16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f
ChimeraOS#17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb
crash> struct net_device.state ffff9a9d21336000
state = 5,
state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100).
The device is not present, note lack of __LINK_STATE_PRESENT (0b10).
This is the same sort of panic as observed in commit 4224cfd
("net-sysfs: add check for netdevice being present to speed_show").
There are many other callers of __ethtool_get_link_ksettings() which
don't have a device presence check.
Move this check into ethtool to protect all callers.
Fixes: d519e17 ("net: export device speed and duplex via sysfs")
Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show")
Signed-off-by: Jamie Bainbridge <[email protected]>
Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com
Signed-off-by: Jakub Kicinski <[email protected]>
flukejones
pushed a commit
to flukejones/linux
that referenced
this pull request
Sep 6, 2024
[ Upstream commit a699781 ] A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] ChimeraOS#8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] ChimeraOS#9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 ChimeraOS#10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 ChimeraOS#11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 ChimeraOS#12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c ChimeraOS#13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b ChimeraOS#14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 ChimeraOS#15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 ChimeraOS#16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f ChimeraOS#17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers. Fixes: d519e17 ("net: export device speed and duplex via sysfs") Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show") Signed-off-by: Jamie Bainbridge <[email protected]> Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
honjow
pushed a commit
to SkorionOS/linux
that referenced
this pull request
Oct 11, 2024
commit 9af2efe upstream. The fields in the hist_entry are filled on-demand which means they only have meaningful values when relevant sort keys are used. So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in the hist entry can be garbage. So it shouldn't access it unconditionally. I got a segfault, when I wanted to see cgroup profiles. $ sudo perf record -a --all-cgroups --synth=cgroup true $ sudo perf report -s cgroup Program received signal SIGSEGV, Segmentation fault. 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 48 return RC_CHK_ACCESS(map)->dso; (gdb) bt #0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 #1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344 #2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385 ChimeraOS#3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true) at util/hist.c:644 ChimeraOS#4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761 ChimeraOS#5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779 ChimeraOS#6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015 ChimeraOS#7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0) at util/hist.c:1260 ChimeraOS#8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at builtin-report.c:334 ChimeraOS#9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232 ChimeraOS#10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128, sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271 ChimeraOS#11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354 ChimeraOS#12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132 ChimeraOS#13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245 ChimeraOS#14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324 ChimeraOS#15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342 ChimeraOS#16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60) at util/session.c:780 ChimeraOS#17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688, file_path=0x555556038ff0 "perf.data") at util/session.c:1406 As you can see the entry->ms.map was NULL even if he->ms.map has a value. This is because 'sym' sort key is not given, so it cannot assume whether he->ms.sym and entry->ms.sym is the same. I only checked the 'sym' sort key here as it implies 'dso' behavior (so maps are the same). Fixes: ac01c8c ("perf hist: Update hist symbol when updating maps") Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Matt Fleming <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
flukejones
pushed a commit
to flukejones/linux
that referenced
this pull request
Nov 11, 2024
KASAN reports an out of bounds read: BUG: KASAN: slab-out-of-bounds in __kuid_val include/linux/uidgid.h:36 BUG: KASAN: slab-out-of-bounds in uid_eq include/linux/uidgid.h:63 [inline] BUG: KASAN: slab-out-of-bounds in key_task_permission+0x394/0x410 security/keys/permission.c:54 Read of size 4 at addr ffff88813c3ab618 by task stress-ng/4362 CPU: 2 PID: 4362 Comm: stress-ng Not tainted 5.10.0-14930-gafbffd6c3ede ChimeraOS#15 Call Trace: __dump_stack lib/dump_stack.c:82 [inline] dump_stack+0x107/0x167 lib/dump_stack.c:123 print_address_description.constprop.0+0x19/0x170 mm/kasan/report.c:400 __kasan_report.cold+0x6c/0x84 mm/kasan/report.c:560 kasan_report+0x3a/0x50 mm/kasan/report.c:585 __kuid_val include/linux/uidgid.h:36 [inline] uid_eq include/linux/uidgid.h:63 [inline] key_task_permission+0x394/0x410 security/keys/permission.c:54 search_nested_keyrings+0x90e/0xe90 security/keys/keyring.c:793 This issue was also reported by syzbot. It can be reproduced by following these steps(more details [1]): 1. Obtain more than 32 inputs that have similar hashes, which ends with the pattern '0xxxxxxxe6'. 2. Reboot and add the keys obtained in step 1. The reproducer demonstrates how this issue happened: 1. In the search_nested_keyrings function, when it iterates through the slots in a node(below tag ascend_to_node), if the slot pointer is meta and node->back_pointer != NULL(it means a root), it will proceed to descend_to_node. However, there is an exception. If node is the root, and one of the slots points to a shortcut, it will be treated as a keyring. 2. Whether the ptr is keyring decided by keyring_ptr_is_keyring function. However, KEYRING_PTR_SUBTYPE is 0x2UL, the same as ASSOC_ARRAY_PTR_SUBTYPE_MASK. 3. When 32 keys with the similar hashes are added to the tree, the ROOT has keys with hashes that are not similar (e.g. slot 0) and it splits NODE A without using a shortcut. When NODE A is filled with keys that all hashes are xxe6, the keys are similar, NODE A will split with a shortcut. Finally, it forms the tree as shown below, where slot 6 points to a shortcut. NODE A +------>+---+ ROOT | | 0 | xxe6 +---+ | +---+ xxxx | 0 | shortcut : : xxe6 +---+ | +---+ xxe6 : : | | | xxe6 +---+ | +---+ | 6 |---+ : : xxe6 +---+ +---+ xxe6 : : | f | xxe6 +---+ +---+ xxe6 | f | +---+ 4. As mentioned above, If a slot(slot 6) of the root points to a shortcut, it may be mistakenly transferred to a key*, leading to a read out-of-bounds read. To fix this issue, one should jump to descend_to_node if the ptr is a shortcut, regardless of whether the node is root or not. [1] https://lore.kernel.org/linux-kernel/[email protected]/ [jarkko: tweaked the commit message a bit to have an appropriate closes tag.] Fixes: b2a4df2 ("KEYS: Expand the capacity of a keyring") Reported-by: [email protected] Closes: https://lore.kernel.org/all/[email protected]/T/ Signed-off-by: Chen Ridong <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]>
honjow
pushed a commit
to SkorionOS/linux
that referenced
this pull request
Nov 17, 2024
[ Upstream commit 4a74da0 ] KASAN reports an out of bounds read: BUG: KASAN: slab-out-of-bounds in __kuid_val include/linux/uidgid.h:36 BUG: KASAN: slab-out-of-bounds in uid_eq include/linux/uidgid.h:63 [inline] BUG: KASAN: slab-out-of-bounds in key_task_permission+0x394/0x410 security/keys/permission.c:54 Read of size 4 at addr ffff88813c3ab618 by task stress-ng/4362 CPU: 2 PID: 4362 Comm: stress-ng Not tainted 5.10.0-14930-gafbffd6c3ede ChimeraOS#15 Call Trace: __dump_stack lib/dump_stack.c:82 [inline] dump_stack+0x107/0x167 lib/dump_stack.c:123 print_address_description.constprop.0+0x19/0x170 mm/kasan/report.c:400 __kasan_report.cold+0x6c/0x84 mm/kasan/report.c:560 kasan_report+0x3a/0x50 mm/kasan/report.c:585 __kuid_val include/linux/uidgid.h:36 [inline] uid_eq include/linux/uidgid.h:63 [inline] key_task_permission+0x394/0x410 security/keys/permission.c:54 search_nested_keyrings+0x90e/0xe90 security/keys/keyring.c:793 This issue was also reported by syzbot. It can be reproduced by following these steps(more details [1]): 1. Obtain more than 32 inputs that have similar hashes, which ends with the pattern '0xxxxxxxe6'. 2. Reboot and add the keys obtained in step 1. The reproducer demonstrates how this issue happened: 1. In the search_nested_keyrings function, when it iterates through the slots in a node(below tag ascend_to_node), if the slot pointer is meta and node->back_pointer != NULL(it means a root), it will proceed to descend_to_node. However, there is an exception. If node is the root, and one of the slots points to a shortcut, it will be treated as a keyring. 2. Whether the ptr is keyring decided by keyring_ptr_is_keyring function. However, KEYRING_PTR_SUBTYPE is 0x2UL, the same as ASSOC_ARRAY_PTR_SUBTYPE_MASK. 3. When 32 keys with the similar hashes are added to the tree, the ROOT has keys with hashes that are not similar (e.g. slot 0) and it splits NODE A without using a shortcut. When NODE A is filled with keys that all hashes are xxe6, the keys are similar, NODE A will split with a shortcut. Finally, it forms the tree as shown below, where slot 6 points to a shortcut. NODE A +------>+---+ ROOT | | 0 | xxe6 +---+ | +---+ xxxx | 0 | shortcut : : xxe6 +---+ | +---+ xxe6 : : | | | xxe6 +---+ | +---+ | 6 |---+ : : xxe6 +---+ +---+ xxe6 : : | f | xxe6 +---+ +---+ xxe6 | f | +---+ 4. As mentioned above, If a slot(slot 6) of the root points to a shortcut, it may be mistakenly transferred to a key*, leading to a read out-of-bounds read. To fix this issue, one should jump to descend_to_node if the ptr is a shortcut, regardless of whether the node is root or not. [1] https://lore.kernel.org/linux-kernel/[email protected]/ [jarkko: tweaked the commit message a bit to have an appropriate closes tag.] Fixes: b2a4df2 ("KEYS: Expand the capacity of a keyring") Reported-by: [email protected] Closes: https://lore.kernel.org/all/[email protected]/T/ Signed-off-by: Chen Ridong <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
flukejones
pushed a commit
to flukejones/linux
that referenced
this pull request
Dec 8, 2024
Shinichiro reported the following use-after free that sometimes is happening in our CI system when running fstests' btrfs/284 on a TCMU runner device: BUG: KASAN: slab-use-after-free in lock_release+0x708/0x780 Read of size 8 at addr ffff888106a83f18 by task kworker/u80:6/219 CPU: 8 UID: 0 PID: 219 Comm: kworker/u80:6 Not tainted 6.12.0-rc6-kts+ ChimeraOS#15 Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020 Workqueue: btrfs-endio btrfs_end_bio_work [btrfs] Call Trace: <TASK> dump_stack_lvl+0x6e/0xa0 ? lock_release+0x708/0x780 print_report+0x174/0x505 ? lock_release+0x708/0x780 ? __virt_addr_valid+0x224/0x410 ? lock_release+0x708/0x780 kasan_report+0xda/0x1b0 ? lock_release+0x708/0x780 ? __wake_up+0x44/0x60 lock_release+0x708/0x780 ? __pfx_lock_release+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 ? lock_is_held_type+0x9a/0x110 _raw_spin_unlock_irqrestore+0x1f/0x60 __wake_up+0x44/0x60 btrfs_encoded_read_endio+0x14b/0x190 [btrfs] btrfs_check_read_bio+0x8d9/0x1360 [btrfs] ? lock_release+0x1b0/0x780 ? trace_lock_acquire+0x12f/0x1a0 ? __pfx_btrfs_check_read_bio+0x10/0x10 [btrfs] ? process_one_work+0x7e3/0x1460 ? lock_acquire+0x31/0xc0 ? process_one_work+0x7e3/0x1460 process_one_work+0x85c/0x1460 ? __pfx_process_one_work+0x10/0x10 ? assign_work+0x16c/0x240 worker_thread+0x5e6/0xfc0 ? __pfx_worker_thread+0x10/0x10 kthread+0x2c3/0x3a0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 3661: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 btrfs_encoded_read_regular_fill_pages+0x16c/0x6d0 [btrfs] send_extent_data+0xf0f/0x24a0 [btrfs] process_extent+0x48a/0x1830 [btrfs] changed_cb+0x178b/0x2ea0 [btrfs] btrfs_ioctl_send+0x3bf9/0x5c20 [btrfs] _btrfs_ioctl_send+0x117/0x330 [btrfs] btrfs_ioctl+0x184a/0x60a0 [btrfs] __x64_sys_ioctl+0x12e/0x1a0 do_syscall_64+0x95/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 3661: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x70 __kasan_slab_free+0x4f/0x70 kfree+0x143/0x490 btrfs_encoded_read_regular_fill_pages+0x531/0x6d0 [btrfs] send_extent_data+0xf0f/0x24a0 [btrfs] process_extent+0x48a/0x1830 [btrfs] changed_cb+0x178b/0x2ea0 [btrfs] btrfs_ioctl_send+0x3bf9/0x5c20 [btrfs] _btrfs_ioctl_send+0x117/0x330 [btrfs] btrfs_ioctl+0x184a/0x60a0 [btrfs] __x64_sys_ioctl+0x12e/0x1a0 do_syscall_64+0x95/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e The buggy address belongs to the object at ffff888106a83f00 which belongs to the cache kmalloc-rnd-07-96 of size 96 The buggy address is located 24 bytes inside of freed 96-byte region [ffff888106a83f00, ffff888106a83f60) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888106a83800 pfn:0x106a83 flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff) page_type: f5(slab) raw: 0017ffffc0000000 ffff888100053680 ffffea0004917200 0000000000000004 raw: ffff888106a83800 0000000080200019 00000001f5000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888106a83e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff888106a83e80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc >ffff888106a83f00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ^ ffff888106a83f80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff888106a84000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Further analyzing the trace and the crash dump's vmcore file shows that the wake_up() call in btrfs_encoded_read_endio() is calling wake_up() on the wait_queue that is in the private data passed to the end_io handler. Commit 4ff47df ("btrfs: move priv off stack in btrfs_encoded_read_regular_fill_pages()") moved 'struct btrfs_encoded_read_private' off the stack. Before that commit one can see a corruption of the private data when analyzing the vmcore after a crash: *(struct btrfs_encoded_read_private *)0xffff88815626eec8 = { .wait = (wait_queue_head_t){ .lock = (spinlock_t){ .rlock = (struct raw_spinlock){ .raw_lock = (arch_spinlock_t){ .val = (atomic_t){ .counter = (int)-2005885696, }, .locked = (u8)0, .pending = (u8)157, .locked_pending = (u16)40192, .tail = (u16)34928, }, .magic = (unsigned int)536325682, .owner_cpu = (unsigned int)29, .owner = (void *)__SCT__tp_func_btrfs_transaction_commit+0x0 = 0x0, .dep_map = (struct lockdep_map){ .key = (struct lock_class_key *)0xffff8881575a3b6c, .class_cache = (struct lock_class *[2]){ 0xffff8882a71985c0, 0xffffea00066f5d40 }, .name = (const char *)0xffff88815626f100 = "", .wait_type_outer = (u8)37, .wait_type_inner = (u8)178, .lock_type = (u8)154, }, }, .__padding = (u8 [24]){ 0, 157, 112, 136, 50, 174, 247, 31, 29 }, .dep_map = (struct lockdep_map){ .key = (struct lock_class_key *)0xffff8881575a3b6c, .class_cache = (struct lock_class *[2]){ 0xffff8882a71985c0, 0xffffea00066f5d40 }, .name = (const char *)0xffff88815626f100 = "", .wait_type_outer = (u8)37, .wait_type_inner = (u8)178, .lock_type = (u8)154, }, }, .head = (struct list_head){ .next = (struct list_head *)0x112cca, .prev = (struct list_head *)0x47, }, }, .pending = (atomic_t){ .counter = (int)-1491499288, }, .status = (blk_status_t)130, } Here we can see several indicators of in-memory data corruption, e.g. the large negative atomic values of ->pending or ->wait->lock->rlock->raw_lock->val, as well as the bogus spinlock magic 0x1ff7ae32 (decimal 536325682 above) instead of 0xdead4ead or the bogus pointer values for ->wait->head. To fix this, change atomic_dec_return() to atomic_dec_and_test() to fix the corruption, as atomic_dec_return() is defined as two instructions on x86_64, whereas atomic_dec_and_test() is defined as a single atomic operation. This can lead to a situation where counter value is already decremented but the if statement in btrfs_encoded_read_endio() is not completely processed, i.e. the 0 test has not completed. If another thread continues executing btrfs_encoded_read_regular_fill_pages() the atomic_dec_return() there can see an already updated ->pending counter and continues by freeing the private data. Continuing in the endio handler the test for 0 succeeds and the wait_queue is woken up, resulting in a use-after-free. Reported-by: Shinichiro Kawasaki <[email protected]> Suggested-by: Damien Le Moal <[email protected]> Fixes: 1881fba ("btrfs: add BTRFS_IOC_ENCODED_READ ioctl") CC: [email protected] # 6.1+ Reviewed-by: Filipe Manana <[email protected]> Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Johannes Thumshirn <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
NeroReflex
pushed a commit
that referenced
this pull request
Dec 12, 2024
[ Upstream commit 05b36b0 ] Shinichiro reported the following use-after free that sometimes is happening in our CI system when running fstests' btrfs/284 on a TCMU runner device: BUG: KASAN: slab-use-after-free in lock_release+0x708/0x780 Read of size 8 at addr ffff888106a83f18 by task kworker/u80:6/219 CPU: 8 UID: 0 PID: 219 Comm: kworker/u80:6 Not tainted 6.12.0-rc6-kts+ #15 Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020 Workqueue: btrfs-endio btrfs_end_bio_work [btrfs] Call Trace: <TASK> dump_stack_lvl+0x6e/0xa0 ? lock_release+0x708/0x780 print_report+0x174/0x505 ? lock_release+0x708/0x780 ? __virt_addr_valid+0x224/0x410 ? lock_release+0x708/0x780 kasan_report+0xda/0x1b0 ? lock_release+0x708/0x780 ? __wake_up+0x44/0x60 lock_release+0x708/0x780 ? __pfx_lock_release+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 ? lock_is_held_type+0x9a/0x110 _raw_spin_unlock_irqrestore+0x1f/0x60 __wake_up+0x44/0x60 btrfs_encoded_read_endio+0x14b/0x190 [btrfs] btrfs_check_read_bio+0x8d9/0x1360 [btrfs] ? lock_release+0x1b0/0x780 ? trace_lock_acquire+0x12f/0x1a0 ? __pfx_btrfs_check_read_bio+0x10/0x10 [btrfs] ? process_one_work+0x7e3/0x1460 ? lock_acquire+0x31/0xc0 ? process_one_work+0x7e3/0x1460 process_one_work+0x85c/0x1460 ? __pfx_process_one_work+0x10/0x10 ? assign_work+0x16c/0x240 worker_thread+0x5e6/0xfc0 ? __pfx_worker_thread+0x10/0x10 kthread+0x2c3/0x3a0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 3661: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 btrfs_encoded_read_regular_fill_pages+0x16c/0x6d0 [btrfs] send_extent_data+0xf0f/0x24a0 [btrfs] process_extent+0x48a/0x1830 [btrfs] changed_cb+0x178b/0x2ea0 [btrfs] btrfs_ioctl_send+0x3bf9/0x5c20 [btrfs] _btrfs_ioctl_send+0x117/0x330 [btrfs] btrfs_ioctl+0x184a/0x60a0 [btrfs] __x64_sys_ioctl+0x12e/0x1a0 do_syscall_64+0x95/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 3661: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x70 __kasan_slab_free+0x4f/0x70 kfree+0x143/0x490 btrfs_encoded_read_regular_fill_pages+0x531/0x6d0 [btrfs] send_extent_data+0xf0f/0x24a0 [btrfs] process_extent+0x48a/0x1830 [btrfs] changed_cb+0x178b/0x2ea0 [btrfs] btrfs_ioctl_send+0x3bf9/0x5c20 [btrfs] _btrfs_ioctl_send+0x117/0x330 [btrfs] btrfs_ioctl+0x184a/0x60a0 [btrfs] __x64_sys_ioctl+0x12e/0x1a0 do_syscall_64+0x95/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e The buggy address belongs to the object at ffff888106a83f00 which belongs to the cache kmalloc-rnd-07-96 of size 96 The buggy address is located 24 bytes inside of freed 96-byte region [ffff888106a83f00, ffff888106a83f60) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888106a83800 pfn:0x106a83 flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff) page_type: f5(slab) raw: 0017ffffc0000000 ffff888100053680 ffffea0004917200 0000000000000004 raw: ffff888106a83800 0000000080200019 00000001f5000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888106a83e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff888106a83e80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc >ffff888106a83f00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ^ ffff888106a83f80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff888106a84000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Further analyzing the trace and the crash dump's vmcore file shows that the wake_up() call in btrfs_encoded_read_endio() is calling wake_up() on the wait_queue that is in the private data passed to the end_io handler. Commit 4ff47df ("btrfs: move priv off stack in btrfs_encoded_read_regular_fill_pages()") moved 'struct btrfs_encoded_read_private' off the stack. Before that commit one can see a corruption of the private data when analyzing the vmcore after a crash: *(struct btrfs_encoded_read_private *)0xffff88815626eec8 = { .wait = (wait_queue_head_t){ .lock = (spinlock_t){ .rlock = (struct raw_spinlock){ .raw_lock = (arch_spinlock_t){ .val = (atomic_t){ .counter = (int)-2005885696, }, .locked = (u8)0, .pending = (u8)157, .locked_pending = (u16)40192, .tail = (u16)34928, }, .magic = (unsigned int)536325682, .owner_cpu = (unsigned int)29, .owner = (void *)__SCT__tp_func_btrfs_transaction_commit+0x0 = 0x0, .dep_map = (struct lockdep_map){ .key = (struct lock_class_key *)0xffff8881575a3b6c, .class_cache = (struct lock_class *[2]){ 0xffff8882a71985c0, 0xffffea00066f5d40 }, .name = (const char *)0xffff88815626f100 = "", .wait_type_outer = (u8)37, .wait_type_inner = (u8)178, .lock_type = (u8)154, }, }, .__padding = (u8 [24]){ 0, 157, 112, 136, 50, 174, 247, 31, 29 }, .dep_map = (struct lockdep_map){ .key = (struct lock_class_key *)0xffff8881575a3b6c, .class_cache = (struct lock_class *[2]){ 0xffff8882a71985c0, 0xffffea00066f5d40 }, .name = (const char *)0xffff88815626f100 = "", .wait_type_outer = (u8)37, .wait_type_inner = (u8)178, .lock_type = (u8)154, }, }, .head = (struct list_head){ .next = (struct list_head *)0x112cca, .prev = (struct list_head *)0x47, }, }, .pending = (atomic_t){ .counter = (int)-1491499288, }, .status = (blk_status_t)130, } Here we can see several indicators of in-memory data corruption, e.g. the large negative atomic values of ->pending or ->wait->lock->rlock->raw_lock->val, as well as the bogus spinlock magic 0x1ff7ae32 (decimal 536325682 above) instead of 0xdead4ead or the bogus pointer values for ->wait->head. To fix this, change atomic_dec_return() to atomic_dec_and_test() to fix the corruption, as atomic_dec_return() is defined as two instructions on x86_64, whereas atomic_dec_and_test() is defined as a single atomic operation. This can lead to a situation where counter value is already decremented but the if statement in btrfs_encoded_read_endio() is not completely processed, i.e. the 0 test has not completed. If another thread continues executing btrfs_encoded_read_regular_fill_pages() the atomic_dec_return() there can see an already updated ->pending counter and continues by freeing the private data. Continuing in the endio handler the test for 0 succeeds and the wait_queue is woken up, resulting in a use-after-free. Reported-by: Shinichiro Kawasaki <[email protected]> Suggested-by: Damien Le Moal <[email protected]> Fixes: 1881fba ("btrfs: add BTRFS_IOC_ENCODED_READ ioctl") CC: [email protected] # 6.1+ Reviewed-by: Filipe Manana <[email protected]> Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Johannes Thumshirn <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
flukejones
pushed a commit
to flukejones/linux
that referenced
this pull request
Feb 20, 2025
While performing the rq locking dance in dispatch_to_local_dsq(), we may trigger the following lock imbalance condition, in particular when multiple tasks are rapidly changing CPU affinity (i.e., running a `stress-ng --race-sched 0`): [ 13.413579] ===================================== [ 13.413660] WARNING: bad unlock balance detected! [ 13.413729] 6.13.0-virtme ChimeraOS#15 Not tainted [ 13.413792] ------------------------------------- [ 13.413859] kworker/1:1/80 is trying to release lock (&rq->__lock) at: [ 13.413954] [<ffffffff873c6c48>] dispatch_to_local_dsq+0x108/0x1a0 [ 13.414111] but there are no more locks to release! [ 13.414176] [ 13.414176] other info that might help us debug this: [ 13.414258] 1 lock held by kworker/1:1/80: [ 13.414318] #0: ffff8b66feb41698 (&rq->__lock){-.-.}-{2:2}, at: raw_spin_rq_lock_nested+0x20/0x90 [ 13.414612] [ 13.414612] stack backtrace: [ 13.415255] CPU: 1 UID: 0 PID: 80 Comm: kworker/1:1 Not tainted 6.13.0-virtme ChimeraOS#15 [ 13.415505] Workqueue: 0x0 (events) [ 13.415567] Sched_ext: dsp_local_on (enabled+all), task: runnable_at=-2ms [ 13.415570] Call Trace: [ 13.415700] <TASK> [ 13.415744] dump_stack_lvl+0x78/0xe0 [ 13.415806] ? dispatch_to_local_dsq+0x108/0x1a0 [ 13.415884] print_unlock_imbalance_bug+0x11b/0x130 [ 13.415965] ? dispatch_to_local_dsq+0x108/0x1a0 [ 13.416226] lock_release+0x231/0x2c0 [ 13.416326] _raw_spin_unlock+0x1b/0x40 [ 13.416422] dispatch_to_local_dsq+0x108/0x1a0 [ 13.416554] flush_dispatch_buf+0x199/0x1d0 [ 13.416652] balance_one+0x194/0x370 [ 13.416751] balance_scx+0x61/0x1e0 [ 13.416848] prev_balance+0x43/0xb0 [ 13.416947] __pick_next_task+0x6b/0x1b0 [ 13.417052] __schedule+0x20d/0x1740 This happens because dispatch_to_local_dsq() is racing with dispatch_dequeue() and, when the latter wins, we incorrectly assume that the task has been moved to dst_rq. Fix by properly tracking the currently locked rq. Fixes: 4d3ca89 ("sched_ext: Refactor consume_remote_task()") Signed-off-by: Andrea Righi <[email protected]> Signed-off-by: Tejun Heo <[email protected]>
flukejones
pushed a commit
to flukejones/linux
that referenced
this pull request
Feb 22, 2025
[ Upstream commit 1626e5e ] While performing the rq locking dance in dispatch_to_local_dsq(), we may trigger the following lock imbalance condition, in particular when multiple tasks are rapidly changing CPU affinity (i.e., running a `stress-ng --race-sched 0`): [ 13.413579] ===================================== [ 13.413660] WARNING: bad unlock balance detected! [ 13.413729] 6.13.0-virtme ChimeraOS#15 Not tainted [ 13.413792] ------------------------------------- [ 13.413859] kworker/1:1/80 is trying to release lock (&rq->__lock) at: [ 13.413954] [<ffffffff873c6c48>] dispatch_to_local_dsq+0x108/0x1a0 [ 13.414111] but there are no more locks to release! [ 13.414176] [ 13.414176] other info that might help us debug this: [ 13.414258] 1 lock held by kworker/1:1/80: [ 13.414318] #0: ffff8b66feb41698 (&rq->__lock){-.-.}-{2:2}, at: raw_spin_rq_lock_nested+0x20/0x90 [ 13.414612] [ 13.414612] stack backtrace: [ 13.415255] CPU: 1 UID: 0 PID: 80 Comm: kworker/1:1 Not tainted 6.13.0-virtme ChimeraOS#15 [ 13.415505] Workqueue: 0x0 (events) [ 13.415567] Sched_ext: dsp_local_on (enabled+all), task: runnable_at=-2ms [ 13.415570] Call Trace: [ 13.415700] <TASK> [ 13.415744] dump_stack_lvl+0x78/0xe0 [ 13.415806] ? dispatch_to_local_dsq+0x108/0x1a0 [ 13.415884] print_unlock_imbalance_bug+0x11b/0x130 [ 13.415965] ? dispatch_to_local_dsq+0x108/0x1a0 [ 13.416226] lock_release+0x231/0x2c0 [ 13.416326] _raw_spin_unlock+0x1b/0x40 [ 13.416422] dispatch_to_local_dsq+0x108/0x1a0 [ 13.416554] flush_dispatch_buf+0x199/0x1d0 [ 13.416652] balance_one+0x194/0x370 [ 13.416751] balance_scx+0x61/0x1e0 [ 13.416848] prev_balance+0x43/0xb0 [ 13.416947] __pick_next_task+0x6b/0x1b0 [ 13.417052] __schedule+0x20d/0x1740 This happens because dispatch_to_local_dsq() is racing with dispatch_dequeue() and, when the latter wins, we incorrectly assume that the task has been moved to dst_rq. Fix by properly tracking the currently locked rq. Fixes: 4d3ca89 ("sched_ext: Refactor consume_remote_task()") Signed-off-by: Andrea Righi <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
honjow
pushed a commit
to SkorionOS/linux
that referenced
this pull request
Feb 23, 2025
[ Upstream commit 1626e5e ] While performing the rq locking dance in dispatch_to_local_dsq(), we may trigger the following lock imbalance condition, in particular when multiple tasks are rapidly changing CPU affinity (i.e., running a `stress-ng --race-sched 0`): [ 13.413579] ===================================== [ 13.413660] WARNING: bad unlock balance detected! [ 13.413729] 6.13.0-virtme ChimeraOS#15 Not tainted [ 13.413792] ------------------------------------- [ 13.413859] kworker/1:1/80 is trying to release lock (&rq->__lock) at: [ 13.413954] [<ffffffff873c6c48>] dispatch_to_local_dsq+0x108/0x1a0 [ 13.414111] but there are no more locks to release! [ 13.414176] [ 13.414176] other info that might help us debug this: [ 13.414258] 1 lock held by kworker/1:1/80: [ 13.414318] #0: ffff8b66feb41698 (&rq->__lock){-.-.}-{2:2}, at: raw_spin_rq_lock_nested+0x20/0x90 [ 13.414612] [ 13.414612] stack backtrace: [ 13.415255] CPU: 1 UID: 0 PID: 80 Comm: kworker/1:1 Not tainted 6.13.0-virtme ChimeraOS#15 [ 13.415505] Workqueue: 0x0 (events) [ 13.415567] Sched_ext: dsp_local_on (enabled+all), task: runnable_at=-2ms [ 13.415570] Call Trace: [ 13.415700] <TASK> [ 13.415744] dump_stack_lvl+0x78/0xe0 [ 13.415806] ? dispatch_to_local_dsq+0x108/0x1a0 [ 13.415884] print_unlock_imbalance_bug+0x11b/0x130 [ 13.415965] ? dispatch_to_local_dsq+0x108/0x1a0 [ 13.416226] lock_release+0x231/0x2c0 [ 13.416326] _raw_spin_unlock+0x1b/0x40 [ 13.416422] dispatch_to_local_dsq+0x108/0x1a0 [ 13.416554] flush_dispatch_buf+0x199/0x1d0 [ 13.416652] balance_one+0x194/0x370 [ 13.416751] balance_scx+0x61/0x1e0 [ 13.416848] prev_balance+0x43/0xb0 [ 13.416947] __pick_next_task+0x6b/0x1b0 [ 13.417052] __schedule+0x20d/0x1740 This happens because dispatch_to_local_dsq() is racing with dispatch_dequeue() and, when the latter wins, we incorrectly assume that the task has been moved to dst_rq. Fix by properly tracking the currently locked rq. Fixes: 4d3ca89 ("sched_ext: Refactor consume_remote_task()") Signed-off-by: Andrea Righi <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
NeroReflex
pushed a commit
that referenced
this pull request
Jun 1, 2025
[ Upstream commit 88f7f56 ] When a bio with REQ_PREFLUSH is submitted to dm, __send_empty_flush() generates a flush_bio with REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC, which causes the flush_bio to be throttled by wbt_wait(). An example from v5.4, similar problem also exists in upstream: crash> bt 2091206 PID: 2091206 TASK: ffff2050df92a300 CPU: 109 COMMAND: "kworker/u260:0" #0 [ffff800084a2f7f0] __switch_to at ffff80004008aeb8 #1 [ffff800084a2f820] __schedule at ffff800040bfa0c4 #2 [ffff800084a2f880] schedule at ffff800040bfa4b4 #3 [ffff800084a2f8a0] io_schedule at ffff800040bfa9c4 #4 [ffff800084a2f8c0] rq_qos_wait at ffff8000405925bc #5 [ffff800084a2f940] wbt_wait at ffff8000405bb3a0 #6 [ffff800084a2f9a0] __rq_qos_throttle at ffff800040592254 #7 [ffff800084a2f9c0] blk_mq_make_request at ffff80004057cf38 #8 [ffff800084a2fa60] generic_make_request at ffff800040570138 #9 [ffff800084a2fae0] submit_bio at ffff8000405703b4 #10 [ffff800084a2fb50] xlog_write_iclog at ffff800001280834 [xfs] #11 [ffff800084a2fbb0] xlog_sync at ffff800001280c3c [xfs] #12 [ffff800084a2fbf0] xlog_state_release_iclog at ffff800001280df4 [xfs] #13 [ffff800084a2fc10] xlog_write at ffff80000128203c [xfs] #14 [ffff800084a2fcd0] xlog_cil_push at ffff8000012846dc [xfs] #15 [ffff800084a2fda0] xlog_cil_push_work at ffff800001284a2c [xfs] #16 [ffff800084a2fdb0] process_one_work at ffff800040111d08 #17 [ffff800084a2fe00] worker_thread at ffff8000401121cc #18 [ffff800084a2fe70] kthread at ffff800040118de4 After commit 2def284 ("xfs: don't allow log IO to be throttled"), the metadata submitted by xlog_write_iclog() should not be throttled. But due to the existence of the dm layer, throttling flush_bio indirectly causes the metadata bio to be throttled. Fix this by conditionally adding REQ_IDLE to flush_bio.bi_opf, which makes wbt_should_throttle() return false to avoid wbt_wait(). Signed-off-by: Jinliang Zheng <[email protected]> Reviewed-by: Tianxiang Peng <[email protected]> Reviewed-by: Hao Peng <[email protected]> Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.